Environmental Test Chamber
Filter
Showing 2641–2670 of 3663 results
| Brand | OEM / Generic |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pressure Range | 0–4 kgf/cm² above atmospheric pressure (0–392 kPa gauge) |
| Temperature Range | 100–132 °C |
| Humidity Condition | 100% RH saturated steam |
| Internal Chamber Dimensions (D×H, cm) | Φ25×40 |
| Temperature Control Accuracy | ±0.1 °C (PID-controlled digital controller) |
| Safety Features | Dual overheat protection, mechanical safety valve, interlocked door switch, auto-water replenishment, condensate purge system, ABS insulated door cover, integrated silicone door gasket |
| Brand | OEM / Third-party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Pricing | USD 3,950–6,800 (FOB) |
| Internal Dimensions (W×H×D) | Ø250×300 mm / Ø350×400 mm / Ø450×500 mm / Ø650×600 mm |
| Chamber Material | ASTM A240 Type 316 Stainless Steel |
| External Casing | Powder-coated or 304 stainless steel |
| Temperature Range | +10°C to 132°C (optional 147°C custom calibration) |
| Pressure Range | 0–2.5 kg/cm² gauge (0–35.5 psi), max absolute pressure 3.5 kg/cm² |
| Heating Method | Immersed electric heating elements |
| Humidification | Direct steam generation via electric heater |
| Water Replenishment | Stainless steel float valve system |
| Cycle Control | LED digital timer with temperature-triggered start (ASTM E2035-compliant timing logic) |
| Safety Interlocks | Dual mechanical pressure lock, overpressure relief valve (ASME BPVC Section VIII compliant), door-seal integrity verification prior to pressurization |
| Power Supply | 220–240 VAC, 50/60 Hz, single-phase |
| Thermal Stability | ±0.5°C at setpoint (121°C) |
| Circulation | Natural convection steam atmosphere |
| Origin | Guangdong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | PH |
| Price Range | USD 1,400 – 7,000 |
| Instrument Type | Upright |
| Temperature Range | −70 °C to +180 °C |
| Humidity Range | 5–98 % RH |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±1 °C (high-temp), ±2 °C (low-temp) |
| Humidity Uniformity | ≤ ±3 % RH |
| Humidity Fluctuation | ±3 % RH |
| Heating Rate | 1.0–3.0 °C/min |
| Temperature Resolution | 0.1 °C |
| Humidity Resolution | 0.1 % RH |
| Temperature Control Accuracy | ±0.3 °C |
| Humidity Control Accuracy | ±3 % RH |
| Internal Dimensions (typical) | W500 × H600 × D400 mm |
| External Dimensions (typical) | W1070 × H900 × D650 mm |
| Origin | Guangdong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | PH-80 |
| Price Range | USD 1,400–7,000 |
| Instrument Type | Upright Benchtop Chamber |
| Temperature Range | −70 °C to +180 °C |
| Humidity Range | 20–98 % RH |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±1 °C (high-temp), ±2 °C (low-temp) |
| Humidity Uniformity | ≤ ±3 % RH |
| Humidity Fluctuation | ±3 % RH |
| Heating Rate | 1.0–3.0 °C/min |
| Internal Dimensions (W×H×D) | 400 × 500 × 400 mm |
| External Dimensions (W×H×D) | 970 × 800 × 650 mm |
| Temperature Resolution | 0.1 °C |
| Humidity Resolution | 0.1 % RH |
| Temperature Control Accuracy | ±0.3 °C |
| Humidity Control Accuracy | ±3 % RH |
| Temperature Distribution Uniformity | ±1 °C |
| Humidity Distribution Uniformity | ±3 % RH |
| Heating Time (30 °C → 100 °C) | Approx. 70 min |
| Cooling Time (40 °C → 0 °C) | Approx. 45 min |
| Cooling Time (60 °C → −20 °C) | Approx. 90 min |
| Key | Temperature Range: −40 °C to +150 °C (optional down to −70 °C) |
|---|---|
| Humidity Range | 30–98% RH (optional 5–98% RH) |
| Temp. Resolution | 0.01 °C |
| Humidity Resolution | 0.1% RH |
| Temp. Uniformity | ±0.5 °C |
| Temp. Deviation | ≤±2 °C |
| Humidity Deviation | ≤±2.5% RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control System | TEMI880 color LCD touchscreen controller |
| Internal Construction | SUS304 stainless steel |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G (220 V optional) |
| Compliance | GB10589, GB10592, GB11158, GB/T5170.2, GB/T5170.5, GB2423.1/2/22, GB2424.1 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (approx.) |
| Temperature Range | 100–147 °C (steam temperature) |
| Humidity | 100% saturated steam |
| Humidity Control Stability | ±3% RH |
| Operating Pressure | 1.2–2.89 kg/cm² (absolute, incl. 1 atm) |
| Test Duration | 0–999 h |
| Pressure Ramp Time | 0–1.04 kg/cm² in ~45 min |
| Temperature Uniformity | ±0.5 °C |
| Temperature Display Resolution | 0.1 °C |
| Pressure Uniformity | ±0.1 kg/cm² |
| Humidity Uniformity | ±3% RH |
| Internal Chamber Design Pressure Rating | 4 kg/cm² |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Temperature Range (Loaded) | -40 °C to +85 °C |
| Temperature Range (Unloaded) | -70 °C to +150 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Range | 20–98% RH |
| Humidity Stability | ±2.5% RH |
| Humidity Uniformity | ±4.0% RH |
| Compliance Standards | IEC 61215, IEC 61646, IEC 62108, IEC 61730, UL 1703, IEEE 1513, GB/T 5170.2, GB/T 5170.5 |
| Key | Temperature Range: −40 °C to +150 °C (optional −120 °C to +150 °C) |
|---|---|
| Humidity Range | 30–98% RH (optional 5–98% RH) |
| Temp. Resolution | 0.01 °C |
| Humidity Resolution | 0.1% RH |
| Temp. Uniformity | ±0.5 °C |
| Temp. Deviation | ≤±2 °C |
| Humidity Deviation | ≤±2.5% RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control System | TEMI880 color LCD touchscreen controller |
| Internal Construction | SUS304 stainless steel |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G (custom 220 V available) |
| Key | Temperature Range: +100°C to +147°C (saturated steam temperature) |
|---|---|
| Humidity Range | 75–100% RH (saturated steam, up to 75% RH at 47°C) |
| Humidity Stability | ±3% RH |
| Operating Pressure | 1.2–2.89 kgf/cm² (inclusive of 1 atm ambient) |
| Time Setting Range | 0–999 hours |
| Pressurization Time | ~45 min to reach 1.04 kgf/cm² from ambient |
| Temperature Uniformity | ±0.5°C |
| Temperature Display Resolution | 0.1°C |
| Pressure Uniformity | ±0.1 kgf/cm² |
| Humidity Uniformity | ±3% RH |
| Internal Chamber Design Pressure Rating | 4.0 kgf/cm² |
| Vacuum Pre-Purge Function | Integrated |
| Safety Interlock | Dual-redundant pressure/temperature-sensing door lock |
| Water Autonomy | Up to 48 h continuous operation per fill (optional fully automated water replenishment system) |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Key | Temperature Range: +110 °C to +132 °C |
|---|---|
| Temp. Uniformity | ±1.5 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Range | 75–100 % RH (saturated steam) |
| Humidity Uniformity | ±3.0 % RH |
| Humidity Stability | ±1.5 % RH |
| Pressure Range | 0–2 kg/cm² (configurable up to 4 kg/cm²) |
| Max. Safety Pressure | 4 kg/cm² |
| Vacuum Preconditioning | Integrated particulate-filtered air intake (<1 µm) |
| Test Duration | 0–999 h |
| Steam Circulation | Natural convection |
| Water Consumption | Low—supports continuous operation up to 200 h per fill |
| Compliance | GB/T 10586–1989, GB/T 2423.3–1993 (IEC 60068-2-3), MIL-STD-810D Method 502.2, GJB 150.9–1986, GB/T 2423.34–1986, MIL-STD-883C Method 1004.2 |
| Key | Chamber Dimensions (W×D×H): 800×800×800 mm or 1000×1000×1000 mm |
|---|---|
| Rated Voltage | 220 V ±10%, 50 Hz |
| Sample Rack Height Adjustment Range | 0–750 mm |
| Timer Range | 0–99 h 59 min |
| Timer Accuracy | ±1 min |
| Cycle Control (Load/Blow) | 0–99 h 59 min / 1 s–9999 min |
| Dust Concentration | 2–4 kg/m³ (dry talcum powder) |
| Powder Specification | Passes 75 µm square mesh sieve (wire diameter 50 µm) |
| Internal Construction | SUS201 stainless steel chamber |
| External Casing | A3 steel with electrostatic powder coating |
| Ambient Operating Conditions | 15–35 °C, 45–75 %RH (uncontrolled |
| Control System | PLC-based HMI touchscreen controller with PT100 temperature sensors |
| Safety Protections | Overtemperature cutoff, phase-loss detection, earth-leakage circuit breaker, reinforced tempered glass viewport (800×800 mm or 1000×1000 mm) |
| Airflow Design | Non-laminar, vertically oriented recirculating duct system |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range Options | -20°C to +150°C, -40°C to +150°C, -60°C to +150°C, -70°C to +150°C |
| Humidity Range | 30–98% RH |
| Temp. Uniformity | ±2.0°C (ambient, unloaded) |
| Temp. Stability | ±0.5°C (ambient, unloaded) |
| Temp. Deviation | ±3.0°C (ambient, unloaded) |
| Heating Rate | 1.0–3.0°C/min (unloaded) |
| Cooling Rate | 0.7–1.0°C/min (unloaded) |
| Pressure Range | Ambient to 0.5 kPa |
| Pressure Accuracy | ±1.8 kPa (ambient–40 kPa), ±4.5% (40–4 kPa), ±0.1 kPa (4–0.5 kPa) |
| Depressurization Time | ≤45 min (ambient → 0.5 kPa) |
| Compliance Standards | GB10586-2006, GB10589-2006, GB10592-2006, GB11158-2006, GB/T2423.1–2423.3, GB/T5170.2–5170.5 |
| Key | Capacity Range: 80–1000 L |
|---|---|
| Temperature Range | −70 °C to +150 °C (configurable models) |
| Humidity Range | 5–98 %RH (standard: 20–98 %RH) |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| RH Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | +4.0 °C/min (heat-up), −1.0 °C/min (cool-down) |
| Refrigeration | Hermetic dual-stage compressor with R404A/R23 eco-refrigerant |
| Controller | Touchscreen LCD with bilingual (EN/CN) interface |
| Construction | SUS304 stainless steel interior & exterior |
| Compliance | MIL-STD-810G, IEC 60068-2-1 (Cold), -2-2 (Dry Heat), -2-30 (Damp Heat Cycle), GB/T 2423.1–2423.4, GJB 150.3–150.4 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 13,500 (approx.) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,500 (approx.) |
| Compliance Standards | MIL-STD-810G Method 506.6, IEC 60529 (IPX1–IPX6), ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8, IEC 60068-2-68, GB/T 4942.1, IEC 60034-5 |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,800 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Ramp Rates | 5–25 °C/min (selectable) |
| Temp. Uniformity | ±2 °C |
| Humidity Uniformity | ±3.0% RH (≥75% RH) |
| Temp. Stability | ±0.5 °C |
| Humidity Stability | ±2.5% RH |
| Internal Dimensions (W×H×D, cm) | 50×75×60 / 60×85×80 / 100×100×80 / 100×100×100 |
| Test Port | Ø50 mm (left side) |
| Refrigerant | R507/R23 (zero ODP, low GWP HFC blend) |
| Controller | 7-inch color LCD touch interface with bilingual (EN/CN) GUI, 96 programmable test profiles, max cycle count: 999, max dwell time: 999 h 59 min |
| Safety Protections | Overcurrent, ground fault, compressor high-pressure/overheat, phase failure, overtemperature, leakage current, and PLC-monitored interlock logic |
| Brand | Custom OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,500 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Ramp Rates | 5–25 °C/min (selectable) |
| Temp Uniformity | ±2 °C |
| Humidity Uniformity | ±3.0% RH (≥75% RH) |
| Temp Stability | ±0.5 °C |
| Humidity Stability | ±2.5% RH |
| Internal Volume | 225–1000 L (customizable) |
| Construction | SUS 304 stainless steel |
| Refrigerant | R507/R23 (zero ODP, low GWP) |
| Control Interface | 7″ color LCD touch HMI with bilingual (EN/CN) support |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.3, GJB 150.4, GB/T 10589, GB/T 11158, GB/T 10592 |
| Brand | Custom OEM / Other Industrial Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–18,000 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Ramp Rates | 5–25 °C/min (selectable) |
| Temp. Uniformity | ±2 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Uniformity | ±3.0% RH (≥75% RH) |
| Humidity Stability | ±2.5% RH |
| Internal Volume | 225–1000 L (KS-TH-225 to KS-TH-1000 series) |
| Test Port | Ø50 mm (left-side, sealed feedthrough) |
| Control Interface | 7-inch color LCD touch panel, bilingual (EN/CN), 96 programmable test profiles |
| Safety Compliance | Over-temperature, over-current, leakage, ground fault, compressor high-pressure/low-pressure, phase failure, and emergency power-off protection |
| Refrigerant | R507/R23 (zero ODP, low GWP HFC blend) |
| Structural Material | SUS304 stainless steel interior & chamber frame |
| Airflow Design | Optimized vertical/horizontal recirculation with PID-controlled damper actuation (≤10 s switching time) |
| Recovery Time | ≤5 min after thermal shock transition |
| Standards Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.3–150.5, GB 10589, GB 11158, GB 10592 |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Internal Dimensions (W×H×D) | 50×75×60 cm to 100×100×100 cm |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 % RH (optional: 5–98 % RH) |
| Rapid Thermal Transition Ranges | −45 °C to +85 °C or −20 °C to +85 °C |
| Programmable Ramp Rates | 5–25 °C/min (customizable) |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Uniformity | ±3.0 % RH (≥75 % RH) |
| Humidity Stability | ±2.5 % RH |
| Refrigerant | R507/R23 (zero ODP, low GWP HFC blend) |
| Control Interface | 7-inch color LCD touchscreen with bilingual (EN/CN) GUI |
| Standard Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.3, GB/T 10589, GB/T 11158, GB/T 10592 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Control Accuracy | ±0.5 °C |
| NSS Test Condition | 35 °C ±1 °C (Chamber), 47 °C ±1 °C (Saturated Air Tank) |
| CASS Test Condition | 50 °C ±1 °C (Chamber), 63 °C ±1 °C (Saturated Air Tank) |
| Spray Angle Adjustment | 15° or 30° (planar indexing sample rack) |
| Air Pressure Regulation | Two-stage precision control (coarse: up to 2 kgf/cm² |
| fine | stable 1 kgf/cm² with digital pressure gauge) |
| Chamber Material | Welded PVC board (light gray, high-temp resistant) |
| Lid Material | Reinforced acrylic (impact-resistant, dual-layer edge design) |
| Humidification System | Direct steam heating with pure titanium heating elements |
| Compliance Standards | ASTM B117, ISO 9227, JIS Z2371, CNS 12289, GB/T 2423.17 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | -60°C to +80°C (selectable low-temp options: 0°C / -20°C / -40°C / -60°C) |
| Humidity Range | 20–98% RH (optional extended ranges: 5–98% RH, 10–98% RH, 20–98% RH) |
| Control System | Microprocessor-based PID + SSR + Digital Timer |
| Compliance Standards | GB/T 5170.2–1996, GB/T 2423.2–2008 (IEC 60068-2-2), GJB 150.3A–2009, GJB 150.4A–2009, GJB 360B–2009 |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Brand | OEM / Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,000–4,200 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–1989, GB 2423.2–1989, GB 2423.22–1987, GB 10589–1989, GB 10592–1989, GB 11158–1989 |
| Brand | OEM/ODM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,100 (FOB) |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–1989, GB 2423.2–1989, GB 2423.22–1987, GB 10589–1989, GB 10592–1989, GB 11158–1989 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,100 (approx. based on ¥22,000 at 1 USD ≈ ¥7.1) |
| Temperature Range | –70°C to +150°C (configurable models) |
| Humidity Range | 20%–98% RH |
| Control Accuracy | ±0.5°C / ±2.5% RH |
| Uniformity | ±1.5°C / ±3% RH |
| Ramp Rate | 1–3°C/min (air average, load-dependent) |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–1989, GB 2423.2–1989, GB 2423.22–1987, GB 10589–1989, GB 10592–1989, GB 11158–1989 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 2,650 (FOB) |
| Compliance | GB/T 2423.1–2001 (Cold), GB/T 2423.3–2006 (Steady-State Damp Heat), GB/T 2423.4–2008 (Cyclic Damp Heat), GJB 150.3A–2009, GJB 150.4A–2009, GJB 150.9A–2009 |
| Key | Temperature Range: –40 °C to +150 °C (standard) |
|---|---|
| Humidity Range | 30–98% RH (standard) |
| Temperature Resolution | 0.01 °C |
| Humidity Resolution | 0.1% RH |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤±2 °C |
| Humidity Deviation | ≤±2.5% RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control System | TEMI880 color LCD touchscreen programmable controller |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G (customizable to 220 V) |
| Interior Material | SUS304 stainless steel |
| Exterior Material | SUS304 stainless steel or A3 steel with electrostatic powder coating |
