Incubator Equipment
Filter
Showing 571–600 of 1126 results
| Brand | JingHong |
|---|---|
| Origin | Shanghai, China |
| Model | SHP-150 |
| Temperature Range | 5–50 °C (operational), 5–60 °C (control range) |
| Interior Dimensions | 500 × 450 × 650 mm (W × D × H) |
| Chamber Material | Mirror-finish stainless steel |
| Door Configuration | Dual-door system with tempered glass inner door |
| Control System | Microprocessor-based PID controller with dual digital display (setpoint & actual), timer, power modulation, and auto-tuning |
| Cooling System | Modular refrigeration unit with delayed startup, high/low pressure protection |
| Brand | JingHong |
|---|---|
| Origin | Shanghai, China |
| Refrigeration Method | Compressor-based cooling |
| Air Circulation | Forced convection |
| Temperature Range | 0–60 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Uniformity | ±0.5 °C |
| Chamber Capacity | 150 L |
| External Dimensions | 630 × 660 × 1325 mm |
| Inner Chamber Material | Mirror-finish stainless steel |
| Control System | Microprocessor-based PID controller with dual digital display (setpoint & actual temperature) |
| Insulation | Dual-layer high-density polyurethane foam |
| Door Design | Full tempered glass inner door with outer insulated door |
| Safety Features | Delayed compressor start-up, high/low pressure protection circuit |
| Brand | JingHong |
|---|---|
| Origin | Shanghai, China |
| Refrigeration Method | Compressor-based cooling |
| Air Circulation | Forced convection |
| Temperature Range | 0–60 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Uniformity | ±0.5 °C |
| Chamber Capacity | 250 L |
| External Dimensions | 730 × 760 × 1425 mm |
| Inner Chamber Material | Mirror-finish stainless steel |
| Control System | Microprocessor-based PID controller with dual digital display (setpoint & actual) |
| Insulation | Dual-layer high-density polyurethane foam |
| Door | Full tempered glass inner door + insulated outer door |
| Safety Protections | High/low pressure protection, compressor delay start |
| Brand | JIUPO |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | MCC300 |
| Control Interface | Digital Touchscreen |
| Air Circulation | Natural Convection |
| Temperature Range | 0–70 °C |
| Temperature Uniformity | ±2 °C |
| Internal Volume | 329 L |
| External Dimensions (W×D×H) | 770 × 720 × 1760 mm |
| Internal Dimensions (W×D×H) | 685 × 498 × 967 mm |
| Shelf Capacity | 4 adjustable stainless-steel shelves |
| Total Cultivation Area | 1.3 m² |
| Temperature Resolution | 0.1 °C |
| Rated Power | 1.9 kW (220 V AC / 50 Hz) |
| Operating Ambient Temperature | 5–35 °C |
| Optional | Double-layer tempered glass observation door |
| Brand | JIUPO |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TCC300 |
| Capacity Range | 0–500 L |
| Light Source Type | Multi-spectral LED Array |
| Temperature Range | 3–45 °C (optional low-temp: −10–45 °C) |
| Internal Volume | 329 L |
| External Dimensions | 770 × 720 × 1760 mm |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ≤0.5 °C |
| Temperature Resolution | 0.1 °C |
| Illumination Intensity | 0–100% adjustable (250 μmol/m²·s @ 10 cm, full-spectrum white LED) |
| Spectral Options | Monochromatic (450 nm ±5 nm, 660 nm ±5 nm, 735 nm ±5 nm), Tri-band (RBFR), Quad-band (RBFR + White), 18-band, UVA/UVB/UVC |
| Air Circulation | Vertical bottom-to-top convection |
| Power Consumption | 2.7 kW (220 VAC / 50 Hz) |
| Operating Ambient | 5–35 °C |
| Standard Light Layers | 4 layers (23 cm spacing), total cultivation area: 1.3 m² |
| Brand | JIUPO |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TCC500 |
| Capacity | 510 L (Nominal 500–1000 L Range) |
| Temperature Range | 3–45 °C (Optional Low-Temp Version: −10–45 °C) |
| Internal Dimensions (W×D×H) | 816 × 578 × 1122 mm |
| External Dimensions (W×D×H) | 900 × 800 × 1940 mm |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ≤0.5 °C |
| Temperature Resolution | 0.1 °C |
| Standard Lighting | Full-spectrum LED (380–780 nm), 300 µmol/m²·s @ 10 cm |
| Optional Spectra | Monochromatic (450 nm ±5 nm, 660 nm ±5 nm, 735 nm ±5 nm), RBIR, RBIRW, 18-band, UVA/UVB/UVC |
| Total Illuminated Area | 1.8 m² |
| Power Consumption (Peak) | 2.7 kW |
| Voltage/Frequency | 220 VAC / 50 Hz |
| Operating Ambient Temperature | 5–35 °C |
| Brand | JIUPO |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TCC500D |
| Temperature Range | 3–45 °C (optional low-temp: −10–45 °C) |
| Internal Volume | 483 L |
| External Dimensions | 900 × 800 × 1940 mm |
| Temperature Accuracy | ±0.1 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Stability (Fluctuation) | ≤0.5 °C |
| Standard Lighting | Full-spectrum LED (380–780 nm), 300 μmol/m²·s @ 10 cm |
| Optional Light Sources | Monochromatic LEDs (450 nm ±5 nm, 660 nm ±5 nm, 735 nm ±5 nm), RBIR, RBIRW, 18-band, UVA/UVB/UVC |
| Power Consumption | 3.3 kW (220 VAC / 50 Hz) |
| Operating Ambient Temperature | 5–35 °C |
| Standard Illumination Layers | 2 × 2 (26 cm spacing) |
| Total Cultivation Area | 1.6 m² |
| Insulation | Polyurethane foam-in-place, stainless steel interior, piano-finish exterior |
| Brand | JIUPO |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TCC600 |
| Price Range | USD 9,100 – 9,800 (FOB) |
| Temperature Range | 3–45°C (optional low-temp: −10 to 45°C) |
| Internal Volume | 620 L |
| External Dimensions (W×D×H) | 900 × 800 × 1940 mm |
| Internal Dimensions (W×D×H) | 755 × 558 × 1474 mm |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ≤0.5°C |
| Temperature Resolution | 0.1°C |
| Standard Lighting | Full-spectrum LED (380–780 nm), 300 µmol/m²·s @ 10 cm |
| Optional Spectra | Monochromatic (450 nm ±5 nm, 660 nm ±5 nm, 735 nm ±5 nm), RBIR, RBIRW, 18-band, UVA/UVB/UVC |
| Lighting Control | 0–100% intensity, programmable time-based profiles |
| Power Consumption | 2.9 kW (peak, 220 VAC / 50 Hz) |
| Operating Ambient Temperature | 5–35°C |
| Construction | Stainless steel interior, polyurethane foam insulation, piano-finish exterior |
| Airflow Design | Vertical bottom-to-top circulation |
| Compliance | Designed for GLP-compliant plant tissue culture workflows |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Incubator CO2 |
| Temperature Range | 0–60 °C |
| Temperature Uniformity | ±0.5 °C |
| Humidity Range | 20–95% RH |
| Capacity | 150 L |
| CO₂ Range | 0–20% (±0.3% stability) |
| Temperature Resolution | 0.1 °C |
| CO₂ Resolution | 0.1% |
| Power Consumption | 800 W |
| Net Weight | 110 kg |
| Interface | RS-232 |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Incubig |
| Temperature Range | 20–80 °C |
| Temperature Stability (at 37 °C) | ±0.1 °C |
| Temperature Uniformity (at 37 °C) | ±0.5 °C |
| Setpoint Accuracy | ±2.0% of working temperature |
| Resolution | 0.1 °C |
| Air Circulation | Forced convection via adjustable ventilation fan |
| Chamber Material | AISI 304 stainless steel |
| Door | Double-layer, inner tempered glass door with flexible silicone gasket |
| External Casing | Epoxy-coated steel |
| Interface | RS-232 port for PC, printer, or USB adapter |
| Compliance | Designed to support GLP-compliant workflows and ISO 13485-aligned laboratory environments |
| Brand | JTONE |
|---|---|
| Origin | Anhui, China |
| Model | HH.CP-TW |
| Capacity | 160 L |
| Temperature Range | RT+5°C to 50°C |
| Temperature Uniformity | ±0.3°C |
| Refrigerant | Eco-friendly non-CFC |
| Construction | Cold-rolled steel exterior with electrostatic powder coating |
| Airflow System | Vertical laminar airflow with forced convection circulation |
| CO₂ Control | Dual-stage infrared (IR) sensor-based regulation (5% setpoint typical) |
| Humidity Control | Passive water-jacket-assisted humidification (95% RH typical at 37°C) |
| Safety Features | Independent over-temperature cutoff, UV sterilization lamp, door-temperature compensation, microbial inlet filter (0.2 µm), optional CO₂ pressure regulator |
| Compliance | Designed to support GLP-compliant cell culture workflows |
| Software Interface | LCD microprocessor controller with real-time display of temperature, CO₂ concentration, and elapsed time |
| Brand | JTONE |
|---|---|
| Origin | Zhejiang, China |
| Model | HWS-600 |
| Capacity | 600 L |
| Temperature Range (with Humidification) | 0–50 °C |
| Temperature Uniformity | ±0.8 °C |
| Humidity Range | 30–95 %RH |
| Humidity Control Accuracy | ±2 %RH |
| Construction | Dual-door, triple-pane insulated glass, stainless steel interior chamber with lockable access |
| Compressor | Original Tecumseh (France) hermetic refrigeration unit with delayed start and high/low pressure protection |
| Humidification System | Ultrasonic humidifier with high-reproducibility humidity generation |
| Air Circulation | Forced convection via corrosion-resistant stainless steel ductwork |
| Safety Features | Over-temperature protection, sensor fault detection, automatic shutdown |
| Brand | JTONE |
|---|---|
| Origin | Zhejiang, China |
| Model | JTSQ-50A |
| Capacity | 50 L |
| Temperature Control Range | RT+5°C to 60°C |
| Temperature Uniformity | ±0.3°C |
| Humidity Range | 35% ±5% RH (natural evaporation) |
| CO₂ Control Range | 0–20.0% (IR sensor, ±0.2% accuracy) |
| O₂ Control Range | 1.0–19.0% (hypoxic) or 23.0–50.0% (hyperoxic), up to 90.0% optional |
| O₂ Sensor | Imported zirconia |
| CO₂ Sensor | Imported NDIR infrared |
| Temperature Sensor | PT100 |
| Control System | PLC-based with 4.3″ capacitive touchscreen |
| Sterilization | UV lamp (optional 90°C moist-heat or 180°C dry-heat) |
| Heating Method | Air-jacketed |
| Internal Dimensions (W×D×H) | 340 × 340 × 450 mm |
| Standard Shelving | 2 stainless steel shelves |
| Power Consumption | 250 VA (±10%) |
| Brand | Ju Chuang Environmental |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | HN-25BS |
| Heating Method | Air-Jacketed |
| Temperature Range (with Humidification) | Not Specified |
| Temperature Range (without Humidification) | RT + 5°C to 60°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±0.1°C |
| Humidity Range | Not Applicable (Basic Humidification Optional, No Certified Control) |
| Capacity | 25 L |
| External Dimensions | 340 × 364 × 560 mm |
| Inner Chamber Dimensions | 250 × 250 × 250 mm |
| Power Consumption | 0.2 kW |
| Control Resolution | 0.1°C |
| Chamber Material | Brushed Stainless Steel (BS Series) |
| Brand | JU CHUANG ENVIRONMENTAL |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JC-QX-II |
| Instrument Type | Automated Anaerobic Incubation & Manipulation System |
| Operating Oxygen Concentration | ≤1% (in anaerobic mode) |
| Temperature Range | +3°C to 60°C |
| Temperature Uniformity | ±1°C |
| Temperature Stability (Fluctuation) | ±0.3°C |
| Humidity Control | 90% ±5% RH |
| Gas Supply | 99.99% Nitrogen or Custom Anaerobic Gas Mix (5% H₂ / 10% CO₂ / 85% N₂) |
| Chamber Dimensions (W×D×H) | 81.4 × 66.4 × 66.8 cm |
| Anaerobic Transition Time (Sample Chamber) | ≤5 min |
| Anaerobic Transition Time (Main Chamber) | ≤60 min |
| Anaerobic Maintenance Duration (Gas-Off Mode) | >12 h |
| Compliance | GB/T 18268.1–2010, GB 4824 Class B Group 1 |
| Brand | Ju Chuang Environmental |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JC-SHP-30 |
| Pricing | Available Upon Request |
| Air Circulation | Forced Convection |
| Control Method | Digital PID Temperature Control |
| Temperature Range | Ambient + 5°C to 65°C |
| Temperature Control Accuracy | ±0.1°C |
| Temperature Uniformity | ≤ ±0.3°C (at 37°C) |
| Temperature Fluctuation | ≤ ±0.3°C |
| Chamber Capacity | 30 L |
| External Dimensions | 300 × 300 × 350 mm |
| Internal Chamber Dimensions | 300 × 300 × 350 mm |
| Heating Method | Water-Jacketed |
| Power Input | 650 W |
| Interior Material | Stainless Steel (AISI 304) |
| Insulation | Polyurethane Foam (≥50 mm thickness) |
| Viewing Window | Double-Layer Tempered Glass |
| Lighting | LED Illumination with Switchable Control |
| Safety Features | Over-Temperature Protection, Auto-Cut-Off Circuit |
| Brand | JUNKEN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | DRP-9162E |
| Heating Method | Air-Jacketed |
| Convection Mode | Natural Convection |
| Control System | Digital PID Microprocessor Controller |
| Temperature Range | RT + 5°C to 65°C |
| Temperature Control Accuracy | ±0.1°C |
| Temperature Uniformity | ±1.0°C (at 37°C) |
| Temperature Fluctuation | ±0.5°C (at setpoint) |
| Chamber Capacity | 160 L |
| Power Consumption | ≤380 W |
| Internal Dimensions (W×D×H) | 500 × 500 × 650 mm |
| External Dimensions (W×D×H) | 630 × 600 × 945 mm |
| Interior Material | 304 Mirror-Finish Stainless Steel |
| Exterior Material | 08F Cold-Rolled Steel |
| Door | Dual-door design with tempered glass inner door |
| Timer Range | 0–9999 minutes |
| Sensor | High-Precision Pt100 Platinum Resistance Thermometer |
| Safety Features | Sensor fault alarm, over-temperature alarm, self-diagnostic control loop, parameter memory, temperature display calibration |
| Brand | JWINS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | JLGX-600B-LED |
| Illumination Method | Shelf-Mounted LED Array |
| Light Source | High-Efficiency SMD LED |
| Spectral Range | Visible Spectrum (400–700 nm) |
| Temperature Control Range | −15°C to +50°C |
| Temperature Fluctuation | ±0.5°C to ±1.0°C |
| Temperature Uniformity | ±0.5°C |
| Illuminance Range | 0–12,000 lx |
| Dimming Mode | Stepless Analog/Digital Control |
| Chamber Volume | 600 L |
| External Dimensions | 720 × 790 × 1920 mm |
| Brand | JWINS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | JMRC-450B-LED |
| Illumination Method | Shelf-Mounted LED Array |
| Light Source | High-Efficiency SMD LED Modules |
| Spectral Range | Visible Spectrum (400–700 nm PAR) |
| Temperature Control Range | 0–50 °C |
| Temperature Fluctuation | ±0.5–1.0 °C |
| Temperature Uniformity | ±0.5 °C |
| Humidity Range | 50–95% RH |
| Illuminance Range | 0–12,000 lux |
| Dimming Method | Continuous (0–100%) Analog/PWM Control |
| Chamber Volume | 450 L |
| External Dimensions | 720 × 670 × 1920 mm |
| Origin | Poland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | KK Series |
| Price Range | USD 6,800 – 13,600 (FOB) |
| Temperature Range (with Humidification) | −10 °C to +60 °C |
| Temperature Uniformity | ±0.75 °C |
| Humidity Range | 30–90 %RH |
| Internal Volume | ≥115 L |
| Temperature Stability | ±0.3 °C |
| Humidity Accuracy | ±2 %RH |
| Cooling Rate | 70 °C → 0 °C in ≤60 min |
| Heating Rate | −10 °C → 70 °C in ≤45 min |
| Power Consumption | 1000–2300 W |
| Net Weight | 90–185 kg |
| Brand | Jihepu (Jinan Hepu) |
|---|---|
| Origin | Shandong, China |
| Model | KRC-250CA |
| Temperature Range | −20 °C to +65 °C |
| Temperature Uniformity | ±0.1 °C |
| Temperature Resolution | 0.1 °C |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 1300 W |
| Internal Chamber Dimensions (W×D×H) | 550 × 520 × 900 mm |
| External Dimensions (W×D×H) | 680 × 720 × 1540 mm |
| Standard Shelving | 3 adjustable stainless steel shelves |
| Test Port | Ø25 mm on left side |
| Refrigerant | R134a (environmentally compliant) |
| Operating Ambient | 5 °C to 35 °C, ≤80% RH (non-condensing) |
| Brand | ADOLF KUHNER |
|---|---|
| Origin | Switzerland |
| Model | ISF1-Z |
| Instrument Type | Temperature-Controlled Orbital Shaking Incubator |
| Drive System | Direct-Drive DC Motor |
| Speed Range | 20–500 rpm (up to 700 rpm optional at select amplitudes) |
| Adjustable Amplitude | 3 / 6 / 9 / 12.5 / 19 / 25 / 50 / 70 mm (0–70 mm, continuously variable) |
| Temperature Range | Ambient +10°C to 80°C (lower limit down to –5°C with Peltier or compressor cooling) |
| Temperature Uniformity | < ±0.2°C at 37°C |
| Chamber Volume | 378 L |
| Chamber Material | Electropolished Stainless Steel (AISI 316L) |
| Humidity Control (optional) | 50–85% r.H. (EcoDew® system) |
| CO₂ Control (optional) | 0–20% v/v, IR sensor, ±0.4% abs accuracy at 5% CO₂ |
| Interface | Standard CAN-Bus |
| Power Supply | 230 V AC, 50/60 Hz |
| Max. Power Consumption | ~1000 W |
| Dimensions (L×D×H) | 1288 × 859 × 771 mm |
| Weight | 200–225 kg (model-dependent) |
| Brand | ADOLF KUHNER |
|---|---|
| Origin | Switzerland |
| Model | ISF4-X |
| Instrument Type | Temperature-Controlled Shaking Incubator |
| Speed Range | 20–500 rpm |
| Temperature Range | Ambient +10°C to 80°C (or –10°C to 80°C with compressor option) |
| Temperature Uniformity | ±0.3°C (at 37°C, across full shaker tray) |
| Chamber Volume | 1272 L |
| Power Consumption | <1700 W (standard), <2000–2600 W (with compressor & humidity) |
| Tray Dimensions | 800 × 420 mm |
| Max Load per Tray | 25 kg |
| Orbit Diameters | Ø12.5 mm, Ø25.0 mm, Ø50.0 mm (circular) |
| CO₂ Control | Optional (0–20% vol, NDIR sensor, ±0.4% accuracy at 5%) |
| Humidity Control | Optional (up to 85% r.h., capacitive sensor, ±2% r.h.) |
| Interface | CAN-bus (standard), USB/Ethernet (optional) |
| Lighting | 2 fluorescent lamps |
| Operating Languages | DE/FR/IT/EN/ES |
| Ambient Temp Range | 10–35°C |
| Brand | ADOLF KUHNER |
|---|---|
| Origin | Switzerland |
| Model | LT-X/XC |
| Instrument Type | Temperature-Controlled Orbital/Linear Shaking Incubator |
| Speed Range | 20–500 rpm |
| Speed Accuracy | ±0.5 rpm |
| Temperature Range | Ambient +10 °C to 80 °C (LT-XC: 5–60 °C with enhanced stability) |
| Chamber Volume | 260 L |
| Drive System | Brushless Magnetic Direct Drive |
| Oscillation Modes | Orbital (Ø12.5 / 25.0 / 50.0 mm), Linear (12.5 / 25.0 / 50.0 mm) |
| Temperature Uniformity | ±0.25 °C at 37 °C (across tray, LT-XC variant) |
| Humidity Control | Up to 85 % RH (optional) |
| CO₂ Control | 0–20 % (IR sensor, ±0.4 % accuracy at 5 % CO₂, standard on LT-XC) |
| O₂ Control | 0–20.9 % (zirconia sensor, optional) |
| Airflow | 160 m³/h |
| Power Supply | 220–240 V / 50–60 Hz |
| Weight | 170 kg |
| IP Rating | IP22 (splash-protected drive) |
| Warranty | 5-year manufacturer warranty |
| Brand | Lab Companion |
|---|---|
| Origin | South Korea |
| Model | IB-15G |
| Temperature Range | Ambient + 5°C to 70°C |
| Temperature Uniformity | ±0.1°C at 37°C |
| Chamber Volume | 102 L |
| Internal Dimensions | 480 × 410 × 520 mm |
| External Dimensions | 675 × 605 × 855 mm |
| Standard Shelving | 2 stainless steel wire shelves (max. 6) |
| Shelf Load Capacity | 30 kg per shelf |
| Net Weight | 55 kg |
| Heating Time to 37°C | 22 min |
| Temperature Recovery Time after Door Opening (at 37°C) | 2 min |
| Display Resolution | 0.1°C |
| Timer Range | 1 min – 99 h 59 min |
| Safety | Dual-stage overtemperature protection (patent KR 10-0397583), current overload protection, controller lockout, error code display with audible alarm |
| Compliance | Meets DIN 12880:2015 requirements for general-purpose incubators |
| Brand | Labonce |
|---|---|
| Model | Labonce-1000BI |
| Temperature Range | 0–60°C |
| Chamber Volume | 1000 L |
| Internal Dimensions (W×D×H) | 1400×510×1400 mm |
| External Dimensions (W×D×H) | 1615×925×1975 mm |
| Power Consumption | 2.0 kW |
| Standard Shelving | 4 adjustable stainless steel shelves (8 positions) |
| Temperature Uniformity | ≤2.0°C at 37°C, ≤3.0°C at other setpoints |
| Temperature Fluctuation | ±0.5°C (high-temp), ±1.0°C (low-temp) |
| Control System | LCD controller with adjustable fan speed |
| Data Logging | Internal electronic storage + thermal printer + USB data export |
| Safety Features | Independent over-temperature protection, compressor overheat/overpressure protection, audible alarm |
| Construction | Exterior – powder-coated steel |
| Compliance | GB/T 28851-2012 |
| Ambient Operating Range | +5 to +35°C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Optional Accessories | UV sterilization module, SMS alert system, humidity display, touch-screen controller with 3-tier user permissions and 21 CFR Part 11-compliant audit trail (BIT variant) |
| Brand | Labonce |
|---|---|
| Model | Labonce-150BI |
| Temperature Range | 0–60°C |
| Chamber Volume | 150 L |
| Internal Dimensions (W×D×H) | 520×460×600 mm |
| External Dimensions (W×D×H) | 640×700×1250 mm |
| Power Consumption | 0.5 kW |
| Standard Shelving | 3 stainless steel shelves (max. 6 configurable) |
| Temperature Uniformity | ≤2.0°C at 37°C, ≤3.0°C at other setpoints |
| Temperature Fluctuation | ±0.5°C (high-temp), ±1.0°C (low-temp) |
| Ambient Operating Range | +5 to +35°C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Compliance | GB/T 28851–2012 |
| Construction | Exterior – powder-coated steel |
| Cooling System | Imported hermetic industrial compressor |
| Control Interface | LCD controller with adjustable fan speed |
| Data Logging | Internal electronic storage + thermal dot-matrix printer + USB data export |
| Safety | Independent over-temperature protection, compressor overheat/overpressure cut-off, audible alarm |
| Optional Accessories | UV germicidal lamp, SMS alert module, humidity display, touch-screen controller with 3-tier user permissions and audit trail (BIT variant) |
| Brand | Labonce |
|---|---|
| Model | Labonce-150MI |
| Temperature Range | 0–60°C |
| Chamber Volume | 150 L |
| Internal Dimensions (W×D×H) | 520×460×600 mm |
| External Dimensions (W×D×H) | 640×700×1250 mm |
| Power Consumption | 0.5 kW |
| Standard Shelving | 3 stainless steel shelves (max. 6 configurable) |
| Temperature Uniformity | ≤2.0°C at 37°C |
| Temperature Fluctuation | ±0.5°C (high-temp range), ±1.0°C (low-temp range) |
| Construction | Exterior – powder-coated steel |
| Cooling System | Imported hermetic industrial compressor |
| Control Interface | LCD controller with adjustable air velocity setting |
| Data Logging | Built-in electronic memory + thermal line printer (optional USB data export) |
| Safety | Independent over-temperature protection, compressor overheat/overpressure cut-off, audible alarm |
| Optional Accessories | UV germicidal lamp, interior lighting, testing port, casters, SMS alert module, MIT touchscreen controller (with 3-tier user permissions and 21 CFR Part 11-compliant audit trail) |
| Brand | Labonce |
|---|---|
| Model | Labonce-2000BI |
| Temperature Range | 0–60°C |
| Chamber Volume | 2000 L |
| Internal Dimensions (W×D×H) | 1500×970×1400 mm |
| External Dimensions (W×D×H) | 1710×1380×1990 mm |
| Power Consumption | 2.5 kW |
| Temperature Uniformity | ≤2.0°C at 37°C, ≤3.0°C at other setpoints |
| Temperature Fluctuation | ±0.5°C (high temp), ±1.0°C (low temp) |
| Ambient Operating Temperature | +5 to +35°C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Standard Shelving | 4 adjustable stainless steel shelves (capacity: 8 total) |
| Construction | Exterior – powder-coated steel |
| Compliance | GB/T 28851-2012 |
| Brand | Labonce |
|---|---|
| Model | Labonce-250BI |
| Temperature Range | 0–60°C |
| Chamber Volume | 250 L |
| Internal Dimensions (W×D×H) | 520×460×1050 mm |
| External Dimensions (W×D×H) | 620×690×1650 mm |
| Power Consumption | 0.6 kW |
| Standard Shelving | 3 adjustable stainless steel shelves (8 total positions) |
| Temperature Uniformity | ≤2.0°C at 37°C |
| Temperature Fluctuation | ±0.5°C (high temp) |
| Ambient Operating Range | +5 to +35°C |
| Input Power | AC 220 V ±10%, 50 Hz |
| Compliance | GB/T 28851–2012 |
| Cooling System | Imported hermetic industrial compressor |
| Control Interface | LCD controller with adjustable fan speed |
| Data Logging | Internal electronic storage + thermal dot-matrix printer + USB data export |
| Safety Features | Independent over-temperature protection, compressor overheat/overpressure cut-off, audible alarm |
| Construction | Exterior – powder-coated steel |
| Optional Accessories | UV germicidal lamp, SMS alert module, humidity display, touch-screen controller with 3-tier user permissions and audit trail (BIT variant) |