Incubator Equipment
Filter
Showing 511–540 of 1395 results
| Brand | Jihepu |
|---|---|
| Origin | Shandong, China |
| Model | MJ-250-I |
| Temperature Range | 0°C to 60°C |
| Temperature Uniformity | ±0.5°C |
| Humidity Range | 20%–50% RH (at 20°C) |
| Chamber Capacity | 250 L |
| Temperature Resolution | 0.1°C |
| Power Supply | 220 V, 50 Hz |
| Input Power | 1200 W |
| Ambient Operating Temperature | 5°C–35°C |
| Standard Shelving | 4 adjustable stainless steel shelves |
| Timer Range | 1–9999 minutes |
| Refrigerant | R134a (CFC-free) |
| Brand | Jihepu |
|---|---|
| Origin | Shandong, China |
| Model | LHS150CL |
| Temperature Range (with humidification) | −10 °C to 85 °C |
| Temperature Uniformity | ±0.3 °C |
| Humidity Range | 45–95 % RH |
| Chamber Capacity | 150 L |
| Power Supply | 220 V, 50 Hz |
| Input Power | 1400 W |
| Interior Dimensions (W×D×H) | 500 × 505 × 600 mm |
| Exterior Dimensions (W×D×H) | 630 × 705 × 1150 mm |
| Standard Shelving | 3 adjustable stainless steel shelves |
| Timer Range | 1–9999 minutes |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.3 °C |
| Humidity Accuracy | ±3 % RH |
| Brand | Jihepu |
|---|---|
| Origin | Shandong, China |
| Model | KRG-300A |
| Temperature Range (Dark) | 0–50 °C |
| Temperature Range (Illuminated) | 10–50 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Stability (Fluctuation) | ±1.0 °C |
| Illuminance Range | 0–12,000 lx (5-level adjustable) |
| Chamber Volume | 300 L |
| Interior Dimensions (W×D×H) | 525 × 670 × 1140 mm |
| Exterior Dimensions (W×D×H) | 840 × 880 × 1850 mm |
| Standard Shelving | 4 trays |
| Power Supply | AC 220 V, 50 Hz |
| Control System | PID-based microprocessor (CPU) with power-failure memory |
| Humidity Management | Drain-free water recirculation system |
| Safety Features | Over-temperature alarm, upper-limit temperature cutoff, refrigeration pressure-balanced control |
| Brand | Jihepu |
|---|---|
| Origin | Shandong, China |
| Model | LHS-150CA |
| Temperature Range | −20 °C to 85 °C |
| Temperature Uniformity | ±0.3 °C |
| Humidity Range | 38–95 % RH |
| Chamber Capacity | 150 L |
| Power Supply | 220 V, 50 Hz |
| Input Power | 1600 W |
| Interior Dimensions (W×D×H) | 500 × 505 × 600 mm |
| External Dimensions (W×D×H) | 630 × 705 × 1150 mm |
| Standard Shelving | 3 stainless steel trays |
| Timer Range | 1–9999 minutes |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.3 °C |
| Humidity Accuracy | ±3 % RH |
| Brand | Eppendorf |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | CellXpert C170 |
| Temperature Range & Accuracy | +4 °C above ambient to 50 °C |
| Temperature Uniformity | ±0.25 °C at 37 °C |
| Humidity Range & Accuracy | 90–95 % RH at 37 °C |
| Chamber Capacity | 170 L |
| Brand | Eppendorf |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | CellXpert C170i |
| Temperature Range & Accuracy | 4–50 °C |
| Temperature Uniformity | ±0.3 °C |
| Humidity Range & Accuracy | 90–95 %RH |
| Chamber Capacity | 170 L |
| Brand | Eppendorf |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | CellXpert C170i |
| Temperature Range & Accuracy | +4 °C above ambient to 50 °C |
| Temperature Uniformity | ±0.25 °C at 37 °C |
| Humidity Control Range & Accuracy | 90–95 % RH at 37 °C |
| Chamber Capacity | 170 L |
| Sterilization Mode | 180 °C dry-heat sterilization |
| Heating Method | Fanless, six-sided direct heating |
| Interface | Full-color capacitive touchscreen with audit trail-capable data logging |
| Brand | Eppendorf |
|---|---|
| Origin | Germany |
| Manufacturer | Eppendorf AG |
| Type | Air-jacketed CO₂ incubated shaker |
| CO₂ Detection | Thermal Conductivity (TC) sensor |
| Temperature Range & Accuracy | +8 °C above ambient to 60 °C |
| CO₂ Concentration Range & Accuracy | 0.1–20% (±0.1% at 5% CO₂) |
| Humidity Control | Active dual-directional humidification, up to 85% rH, condensation-free operation |
| Chamber Capacity | 220 L |
| External Dimensions (W×D×H) | 77.3 × 131.8 × 80.5 cm |
| Brand | Eppendorf |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | S41i |
| Temperature Range & Accuracy | +4 °C above ambient to 50 °C |
| Temperature Uniformity | ±0.25 °C at 37 °C |
| Humidity Control | 90–95 % RH at 37 °C |
| Chamber Capacity | 170 L |
| Shaking Speed Range | 25–400 rpm (25–300 rpm when stacked) |
| Shelf Dimensions | 35.6 × 61 cm |
| Maximum Vessel Size | 4 L conical flask |
| Sterilization | Integrated high-temperature decontamination cycle |
| Brand | Equitec |
|---|---|
| Origin | Spain |
| Model | EGCHS |
| Temperature Range | 4–60 °C |
| Humidity Control (HR models) | 20–90 % RH (±3 % RH) |
| Temperature Uniformity | ±1.5 °C at 27 °C, ±1.0 °C at 45 °C |
| Temperature Stability | ±0.75 °C at 27 °C, ±0.5 °C at 40 °C |
| Illumination | Programmable photoperiod with sunrise/sunset simulation (380–720 nm LED options available) |
| Controller | 4.3″ or 7″ TFT color touchscreen (4000-series), with integrated data logger (1-year storage @ 30-s intervals), MODBUS RS485, Ethernet/WiFi, GSM alarm interface (optional), USB/SD card export, GLP-compliant audit trail |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ES-20 |
| Pricing | Upon Request |
| Oscillation Speed | 50–250 rpm |
| Orbit Diameter | 10 mm |
| Temperature Set Range | 25–42 °C |
| Temperature Control Range | Ambient +5 to 42 °C |
| Temp/Speed Resolution | 0.1 °C / 1 rpm |
| Timer Range | 1 min – 96 h |
| Max Load Capacity | 2.5 kg |
| Display | 2-line × 16-character LCD |
| Internal Height | 270 mm |
| External Dimensions (W×L×H) | 340 × 340 × 435 mm |
| Net Weight | 15 kg |
| Power Supply | 230 V, 50–60 Hz |
| Brand | Esco |
|---|---|
| Origin | Singapore |
| Manufacturer | Esco Lifesciences |
| Country of Origin | Imported |
| Instrument Type | Air-Jacketed CO₂ Incubator |
| Model | CCL |
| Brand | Esco |
|---|---|
| Origin | Singapore |
| Model | CCL-170-B-8-P |
| Temperature Range | 12°C below ambient to 60°C |
| Sterilization | 90°C validated moist-heat cycle (HPA certified) |
| Air Filtration | ULPA filter + ISOCIDE® antimicrobial coating + 0.2 µm CO₂ inlet filter |
| Humidity Control | Optional digital display (COA-1001/F) |
| Gas Monitoring Options | CO₂-only, CO₂/O₂, or CO₂/O₂/RH electronic analyzers (COA-2010-F to COA-2017-F) |
| Data Compliance | IQ/OQ documentation package (COA-2011-F), analog output (COA-1005/F), chart recorders (COA-2012-F to COA-2014-F) |
| Remote Monitoring | Voyager Smart Remote Monitoring Software (5250001) |
| Brand | ESCO |
|---|---|
| Origin | Singapore |
| Model | CCL-170B-8 |
| Heating Method | Direct-heat air-jacketed |
| Temperature Range | Ambient +3 to 60 °C |
| Temp. Uniformity | <±0.2 °C |
| Temp. Accuracy | <±0.1 °C |
| Temp. Recovery (after 1-min door opening) | 6 min |
| CO₂ Range | 0–20% |
| CO₂ Accuracy | ±0.1% |
| CO₂ Sensor | NDIR single-beam dual-wavelength infrared |
| CO₂ Recovery | 4 min |
| Humidity Range | Ambient to 97% RH |
| Humidity Recovery (±5% from setpoint) | 15 min |
| Chamber Volume | 170 L |
| Internal Dimensions (W×D×H) | 505 × 530 × 635 mm |
| External Dimensions (W×D×H) | 660 × 660 × 900 mm |
| Power Supply | 230 V, 50/60 Hz, 3.4 A |
| Max. Power Consumption | 800 W |
| Steady-State Power @ 37 °C | 80 W |
| Net Weight | 120 kg |
| Chamber Material | 304 stainless steel, seamless one-piece construction with large-radius internal corners |
| Exterior Coating | ISOCIDE™ antimicrobial-coated galvanized steel |
| Air Filtration | ULPA filter (≥99.999% @ 0.12 µm), ISO 5 (Class 100) cleanroom-grade chamber air |
| Gas Inlet Filtration | 0.2 µm inline sterilizing filter |
| Sterilization | SwiftCon™ 90 °C wet-heat cycle with automated drying and cooling phases |
| Control System | Smartsense™ microprocessor-based PID controller with 16 MB embedded flash memory |
| Data Logging | Full-parameter event logging with timestamped records accessible via LCD interface |
| Interface | RS-485 standard output |
| Compliance | Designed for GLP/GMP environments |
| Brand | Esco |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | CLM-170/240B-8-CN |
| Instrument Type | Air-Jacketed CO₂ Incubator |
| Origin | United Kingdom |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ES-80 |
| Price | Upon Request |
| Oscillation Speed | 50–250 rpm |
| Orbit Diameter | 20 mm |
| Temperature Set Range | 25–80 °C |
| Temperature Control Range | Ambient +5 to 80 °C |
| Temperature Setting Resolution | 0.1 °C |
| Max Load Capacity | 8 kg |
| Timer Range | 1 min – 96 h |
| Continuous Operation | Up to 168 h |
| Display | 2-line × 16-character LCD |
| Internal Height | 270 mm |
| External Dimensions (W×L×H) | 590 × 525 × 510 mm |
| Net Weight | 43 kg |
| Power Supply | 230 V, 50–60 Hz |
| Brand | Esco |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Temperature-Controlled Orbital Shaking Incubator |
| Speed Range | 30–300 rpm |
| Speed Accuracy | ±1 rpm |
| Orbit Diameter | Φ26 mm / Φ50 mm |
| Temperature Range | 4°C to 60°C (with refrigeration down to 4°C, i.e., up to 18°C below ambient) |
| Temperature Fluctuation | ±0.1°C |
| Temperature Uniformity | ±0.3°C (at 37°C, inner chamber) / ±0.5°C (at 37°C, full chamber) |
| Brand | Faithful |
|---|---|
| Origin | Hebei, China |
| Model | DH4000II |
| Temperature Range | RT+5–70°C |
| Temperature Uniformity | ±1.5°C |
| Capacity | 65 L |
| Temperature Resolution | 0.1°C |
| Temperature Fluctuation | ±0.5°C |
| Heating Power | 0.45 kW |
| Chamber Material (Standard) | High-Strength Galvanized Steel |
| Chamber Material (B-Series Option) | Mirror-Finish Stainless Steel |
| Control System | Intelligent PID with Dual 4-Digit LED Display (Measured vs. Setpoint) |
| Timer Range | 0–9999 min with Delay Start & Auto-Stop |
| Safety Features | Over-Temperature Audiovisual Alarm |
| Sensor Type | PT100 Platinum Resistance Thermometer |
| Power Supply | AC 220 V, 50/60 Hz |
| Origin | Italy |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | C140 |
| Price Range | USD 6,800–13,600 (FOB) |
| Temperature Range (lamp off) | −10 °C to +50 °C |
| Temperature Range (lamp on) | −5 °C to +55 °C |
| Temperature Stability | ±0.1 °C |
| Temp. Resolution | 0.1 °C |
| Heating Rate | +1.5 °C/min (IEC 60068-3-5) |
| Cooling Rate | −1.2 °C/min (IEC 60068-3-5) |
| Illumination Range (per shelf) | 5,000–30,000 lux |
| Photosynthetic Photon Flux (PPF) | 150–280 µmol/m²·s |
| Humidity Control Range | 10–98 %RH ±1 % |
| Humidity Source | Deionized or softened water (CaCO₃ ≤ 400 ppm), supply pressure 1–10 bar |
| Chamber Volume | 140 L |
| External Dimensions (W×D×H) | 615 × 475 × 669 mm |
| Internal Dimensions (W×D×H) | 519 × 475 × 669 mm |
| Door Configuration | Single left/right-swing door with auto-closing & thermal lock (>90 °C) |
| Sealing | Magnetic gasket |
| Shelving | Adjustable steel shelves with polymer coating |
| Lighting | Independently controllable fluorescent lamps per shelf |
| Ventilation | Dual internal fans for uniform temp./RH distribution |
| Controller | Microprocessor-based, 20-step programmable cycle, real-time monitoring of setpoint/actual values |
| Safety | Password-protected limit editing, audible/visual alarms, DIN 12880 Class 1 manual-reset overtemperature cutoff |
| Insulation | CFC-/HCFC-free polyurethane foam |
| Construction | Galvanized steel with white epoxy coating or AISI 304 stainless steel option |
| Origin | Italy |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FDM C140 |
| Price Range | USD 6,800–13,600 (FOB Italy) |
| Temperature Range (with Humidification) | 0 °C to +60 °C |
| Temperature Uniformity | ±0.5 °C |
| Relative Humidity Range | 10–98 % RH ±1 % RH |
| Chamber Capacity | 140 L |
| Temperature Resolution & Setpoint Increment | 0.1 °C |
| Temperature Stability | ±0.1 °C |
| Heating Rate | +1.5 °C/min (per IEC 60068-3-5) |
| Cooling Rate | −1.2 °C/min (per IEC 60068-3-5) |
| Noise Level | <55 dB(A) |
| Power Supply | 220–230 V AC, 50 Hz |
| Construction | AISI 304 stainless steel interior & white epoxy-coated galvanized steel exterior |
| Insulation | CFC/HCFC-free polyurethane foam (≥60 mm thickness) |
| Door | Dual-hinge, auto-closing, magnetic gasket seal, thermal lockout above 90 °C |
| Shelving | Adjustable, powder-coated steel racks (2 included, max 5) |
| Controller | Dual microprocessor system (separate PID loops for temperature and humidity), 20-step standard programmability, up to 50 stored programs (optional 200-step extended firmware) |
| Humidification | Low-inertia steam generator, compatible with deionized water or softened water (CaCO₃ ≤400 ppm), supply pressure 1–10 bar |
| Safety | Manual-reset Class 1 overtemperature protection (DIN 12990), password-protected parameter limits, visual/audible alarm on deviation |
| Brand | FHK (Fujihei Kogyo Co., Ltd.) |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NFA450 |
| Temperature Control Range | 37–38.5 °C |
| Temperature Uniformity | ±1 °C |
| Capacity | 0.25 mL straws × 20 or Eppendorf tubes × 10 |
| Power Supply | Sealed 12 V / 6.5 Ah rechargeable battery |
| Heater | 12 V / 10 W |
| Temperature Setting Accuracy | ±1 °C |
| Temperature Measurement Accuracy | ±1 °C |
| Operating Ambient Temperature | 10–35 °C |
| Operating Ambient Humidity | ≤85% RH |
| Continuous Operation Time | ~24 h (fully charged, setpoint 38 °C) |
| Dimensions (L×W×H) | 370 × 210 × 210 mm |
| Weight | ~6 kg |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | Imported |
| Manufacturer | Thermo Fisher Scientific |
| Model | 311 |
| Temperature Range & Accuracy | Ambient +5°C to 50°C |
| Temperature Uniformity | ±0.5°C |
| Humidity Control | >90% rH at 37°C |
| Chamber Capacity | 184 L (6.5 cu. ft.) |
| Brand | Froilabo |
|---|---|
| Origin | France |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | BC |
| Pricing | Upon Request |
| Brand | GeneScience |
|---|---|
| Origin | USA |
| Model | A10 MINI |
| Incubation Temperature Range | +3°C to 52°C |
| Temperature Uniformity | ±0.3°C |
| Humidity Range | Ambient to 85% RH |
| Final Vacuum Pressure | < 50 mbar |
| Max Gas Injection Pressure | 1050 mbar |
| Gas Flow Rate (50 Hz) | 0.9 m³/h |
| External Dimensions | 14.5 × 23.5 × 28 cm |
| Net Weight | 5 kg |
| Chamber Volume | 3.5 L |
| Power Supply | 220 V, 50 Hz |
| Brand | GeneScience |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | A20 |
| Temperature Control Range | Ambient to 45 °C (optional temperature module) |
| Humidity Control Range | Ambient to 45 °C (optional temperature module) |
| Final Chamber Pressure | <50 mbar |
| Max Gas Input Pressure | 1 bar |
| Gas Flow Rate | 0.9 m³/h |
| Available Culture Volumes | 2.5 L, 3.5 L, 20 L, or 30 L (user-selectable) |
| Brand | GeneScience |
|---|---|
| Origin | USA |
| Model | A30 |
| Temperature Control Range | Ambient to 45 °C (optional temperature control module) |
| Humidity Control Range | Ambient to 45 °C (optional temperature control module) |
| Final Chamber Pressure | <50 mbar |
| Max Gas Injection Pressure | 1 bar |
| Gas Flow Rate | 0.9 m³/h |
| Available Culture Volumes | 2.5 L, 3.5 L, 20 L, or 30 L |
| Integrated Vacuum Pump | Yes |
| Sealing Interface | Quick-connect bayonet coupling |
| Chamber Material | High-gloss, impact-resistant, temperature-stable polyester |
| Optical Clarity | Fully transparent chamber body and lid |
| Programmable O₂ Setpoints | User-defined (0.1–10% O₂) with multi-stage gas purge logic |
| Process Reproducibility | Six-tier QC protocol with full audit trail logging |
| Brand | GeneScience |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | AG300 |
| Temperature Range | Ambient +3°C to 52°C |
| Temperature Uniformity | ±0.3°C |
| Control System | PID-based Digital Thermostat |
| Humidity Control | Automatic, Integrated Humidity Management System |
| Chamber Construction | 10 mm Acrylic Walls |
| Gas Configuration | Single-Gas (10% H₂ + 10% CO₂ + 80% N₂) or Dual-Gas (N₂ + Mixed Gas) |
| Gas Consumption | ~10 m³ lasts ~24 weeks (single-gas mode), ~33 weeks (dual-gas mode) |
| O₂ Detection Limit | <5 ppm (via Palladium Catalyst) |
| Anaerobic/Microaerophilic Mode | 0–10% O₂ programmable |
| Working Volume | 750 × 620 × 500 mm (W×D×H) |
| External Dimensions | 840 × 700 × 720 mm (W×D×H) |
| Weight | ~70 kg |
| Safety Features | Low-pressure alarm, over-temperature cutoff, dry泄压 valve, lift-off lid design |
| Optional Accessories | Anaerobic indicator pump, top-mounted fluorescent lamp kit, single-plate transfer port, rigid cuff system |
| Brand | GeneScience |
|---|---|
| Origin | USA |
| Model | AG300 Plus |
| Incubation Temperature Range | +3°C to 52°C |
| Temperature Uniformity | ±0.3°C |
| Humidity Range | Ambient to 85% RH |
| O₂ Control Range | 0.0–20.9% (±0.1% accuracy) |
| CO₂ Control Range | 0.0–30.0% (±0.1% accuracy) |
| Operating Chamber Dimensions | 750 × 620 × 500 mm (L×W×H) |
| Transfer Lock Capacity | 20 × 90 mm Petri dishes |
| Maximum Culture Capacity | 400 × 90 mm Petri dishes or 70 × 250 mL Erlenmeyer flasks |
| Gas Supply | N₂, CO₂, compressed air, and pre-mixed anaerobic gas (e.g., 85% N₂ / 10% H₂ / 5% CO₂) |
| Brand | GeneScience |
|---|---|
| Origin | USA |
| Model | AG400plus |
| Incubation Temperature Range | Ambient +3°C to 52°C |
| Temperature Uniformity & Stability | ±0.3°C (PID-controlled) |
| Humidity Control | Up to <90% RH |
| Chamber Capacity | 400 × 90 mm Petri Dishes (operational mode), 500 × 90 mm Dishes (pure culture mode), 80 × 250 mL Erlenmeyer Flasks |
| Operating Chamber Dimensions | 770 × 680 × 610 mm (L×W×H) |
| External Dimensions | 860 × 760 × 830 mm (L×W×H) |
| Weight | ~85 kg |
| Gas Supply Options | Single-gas (10% H₂ + 10% CO₂ + 80% N₂) or Dual-gas (N₂ + premixed anaerobic gas) |
| Gas Consumption | ~10 m³ lasts ~30 weeks (dual-gas), ~22 weeks (single-gas) |
| O₂ Detection Limit | <5 ppm (Pd catalyst, 4-year service life) |
| Oxygen Control Range | 0–10% (anaerobic to microaerophilic) |
| Humidity Management | Automated digital humidity control |
| Access Modes | Airlock transfer (20 plates/batch) or seal-and-reseal rapid transfer (<10 s recovery) |
| Safety Features | Low-pressure alarm, over-temperature cutoff, leak detection with time-stamped logging, dry-type pressure relief valve |
| Ergonomics | Lift-off acrylic lid (10 mm thickness), bare-hand operation compatible, foot-switch vacuum/N₂ control, integrated power outlets |
| Optional | Anaerobic indicator pump, top-mounted fluorescent lighting module |
| Brand | GeneScience |
|---|---|
| Origin | USA |
| Model | Anaero Mark |
| Temperature Range | Up to 100°C |
| Temperature Uniformity & Stability | ±0.3°C at 37°C (typical), validated across full operating range |
| Humidity Control | Ambient humidity-dependent, optimized for operation at 18–28°C ambient |
| Gas Interface | 8 total ports (3 gas cylinder inputs, 4 incubation chamber outputs, 1 spare) |
| Chamber Volumes | 3.5 L / 7 L / 10 L / 20 L (user-selectable, modular) |
| Gas Exchange Speed | <2 min for microaerophilic |
| Catalyst | Palladium-coated hydrogen catalyst, regenerable in situ |
| Compliance | Designed to support GLP/GMP workflows with optional audit-trail-capable data logging and 21 CFR Part 11–compliant software modules |