- All
- Favorite
- Popular
- Most rated
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNM-40AX |
| Type | Hydraulic Hot Mounting Press |
| Maximum Molding Pressure | 3200 PSI (224 kgf/cm²) |
| Mold Cavity Diameter | Ø40 mm |
| Temperature Range | 110–200 °C (PID Controlled) |
| Power Supply | 220 V AC, 50/60 Hz |
| Heating Power | 1800 W |
| Total System Power | 2400 W |
| Dimensions (W×D×H) | 450 × 695.5 × 569 mm |
| Weight | 83 kg |
| Cooling | Tap Water or Optional 40 L Recirculating Chiller |
| Compliance | CE Certified |
| Control System | Programmable Logic Controller (PLC) with Touch Interface |
| Preheating Function | Yes |
| One-Touch Auto Cycle | Yes |
| Mold Alignment Mechanism | Rotational Down-Press with Positive Mechanical Registration |
| Pressure Control | Variable-Frequency Hydraulic Drive with Real-Time Compensation |
| Safety Features | Dual-Stage Thermal Lockout, Emergency Stop, Overload Protection, Insulated Lid, Fan-Controlled Active Heat Dissipation |
| Memory Slots | 9 Custom Programs |
| Mounting Modes | 4 Predefined Process Profiles (Phenolic, Acrylic, Segmented T/P, Target-Temperature-Compensated) |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNM-AX6 |
| Instrument Type | Hot Mounting Press |
| Maximum Cavity Capacity | 6 |
| Max Specimen Height | 30 mm |
| Mold Tube Diameter | Ø32 mm |
| Maximum Molding Pressure (in mold tube) | 1625 psi (114 kgf/cm²) |
| Operating Pressure | 130 kgf/cm² |
| Temperature Range | 110–200 °C |
| Heating Power | 3000 W |
| Total Power Consumption | 3500 W |
| Dimensions (W×D×H) | 540 × 552 × 1300 mm |
| Weight | 120 kg |
| Cooling Water Inlet/Outlet | 3/8″ / 5/8″ BSP |
| Control Interface | Touchscreen Panel with Preset Auto-Cycle Modes |
| Safety Features | Thermal Cut-off, Emergency Stop, Overload Protection, Interlocked Lid Safety Switch |
| Standard Accessories | Dispensing Spoon ×1, Funnel ×1, 2 m Inlet/Outlet Hoses ×1 each, Mold Release Agent ×1, #240 Sanding Belt ×4, Belt Grinding Station ×1, Water Filter ×1, Heat-Resistant Gloves ×2, Top Mold Scraper ×1 |
| Brand | TN Testing |
|---|---|
| Origin | Taiwan |
| Model | TNM-32AX |
| Mounting Type | Hot Compression Mounting |
| Max Pressure | 4000 PSI (280 kgf/cm²) |
| Temperature Range | 110–200 °C (PID Controlled) |
| Mounting Diameter | Ø32 mm |
| Drive System | Variable-Frequency-Controlled Hydraulic Actuation |
| Fill Mechanism | Rotational Down-Press with Auto-Alignment |
| Preheating Function | Yes |
| Safety Certifications | CE Compliant |
| Cooling | Tap Water or Optional 40 L Recirculating Chiller |
| Power Supply | 220 V, 50/60 Hz, 2400 W Total |
| Dimensions (W×D×H) | 450 × 695.5 × 569 mm |
| Weight | 82 kg |
| Standard Accessories | 500 g Resin Kit, Spatula, Funnel, Release Agent, 2 × 2 m Inlet/Outlet Hoses |
| Brand | Future-Tech |
|---|---|
| Origin | Japan |
| Model | FTM-32AX |
| Mounting Method | Hot Compression Molding |
| Cylinder Bore Diameter | 32 mm |
| Stroke Length | 82 mm |
| Maximum Hydraulic Pressure | 4000 psi (305 kgf/cm²) |
| Heating Temperature Range | 0–200 °C (°C/°F selectable) |
| Heating Time Range | 0 s – 99 min 30 s |
| Insulation Temperature Range | 30–55 °C |
| Safety Temperature Limit | 40–60 °C |
| Heater Power | 1800 W |
| Cooling | Circulating tap water (external faucet connection) |
| Control Panel | IP55-rated waterproof touchscreen with LED illumination |
| Sample Capacity | Dual-sample mounting via spacer |
| Power Supply | Single-phase AC 200–240 V, 50/60 Hz |
| Total Power Consumption | 2200 W |
| Dimensions (W×D×H) | 463 × 650 × 610 mm |
| Net Weight | 82 kg |
| Standard Accessories | Release spray, Phenol-formaldehyde resin (800 g), spoon, funnel, pinch set, 2 m inlet/outlet hoses with clamps, 2.5 m power cord, center spacer, accessory box |
Show next