Life Science Instruments
Filter
Showing 151–180 of 2745 results
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | LDS-L2 |
| Quotation | Upon Request |
| Minimum Sample Volume | ≤30 mL |
| Pressure Range | −1 to 5 bar (with integrated pressure sensors) |
| Maximum Peristaltic Flow Rate | ≥2200 mL/min |
| Weight Measurement Accuracy | ±0.5% (0–4100 g) |
| Controlled Parameters | Pf (Feed Pressure), Pr (Retentate Pressure), Pp (Permeate Pressure), TMP (Transmembrane Pressure), ΔP (Pressure Drop) |
| Operation Mode | Fully Automated PLC-Controlled TFF |
| Compatible Membranes | PES and Cellulose-based Cassettes & Hollow Fiber Modules (MWCO: 5–1000 kDa |
| Effective Area | 0.01–0.1 m²) |
| Software Compliance | FDA 21 CFR Part 11 Audit Trail Enabled |
| User Access Levels | Three-Tier Password Protection (Operator / Process Engineer / Administrator) |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MPE-L2 |
| Pricing | Available Upon Request |
| Payload Carrier Type | Lipid Nanoparticle (LNP) |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MPE-L2 |
| Carrier Type | Liposomes |
| Particle Size Range | <100 nm |
| Polydispersity Index (PDI) | <0.1 |
| Flow Control | Dual-syringe Pump Driven |
| Chip Integration | Modular High-Pressure Microfluidic Chip |
| Process Mode | Continuous On-Line Preparation (OPT) |
| Compliance Framework | Designed for GMP-aligned process development and early-stage validation |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MPE-L2 |
| Pricing | Available Upon Request |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MPE-L2 |
| Pricing | Available Upon Request |
| Payload Carrier Type | Lipid Nanoparticle (LNP) |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MPE-L2 |
| Carrier Type | Lipid Nanoparticles (LNP) |
| Sample Volume Range | Low-volume (µL–mL scale) |
| Particle Size Control Range | Down to <100 nm |
| Polydispersity Index (PDI) | <0.1 |
| Operational Mode | Continuous-flow, multi-injection capable |
| Compliance Framework | Designed for GLP-compliant process development and PAT-integrated workflows |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MPE-L2 |
| Carrier Type | Liposomes |
| Particle Size Range | <100 nm |
| Polydispersity Index (PDI) | <0.1 |
| Operating Principle | Hydrodynamic Flow-Focusing & High-Pressure Impingement Emulsification |
| Sample Volume per Run | Low-volume (µL–mL scale) |
| In-Process Re-injection Capability | Yes |
| Compliance Context | Designed to support PAT-enabled process development aligned with ICH Q5A, Q5C, and USP <1289> guidelines for nanomedicine characterization |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | MPE-L2 |
| Carrier Type | Lipid Nanoparticle (LNP) |
| Pricing | Available Upon Request |
| Pump-Driven Architecture | Dual-Syringe Precision Injection Pumps |
| Chip-Based Processing | Customizable Microfluidic Chip Platform |
| Minimum Sample Volume | < 100 µL per run |
| Particle Size Range | Down to < 100 nm |
| Polydispersity Index (PDI) | < 0.1 achievable under optimized conditions |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | MPE-L2 / MPE-L3 |
| Pricing | Upon Request |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | MPE-Lab Microfluidic Preparation System |
| Flow Rate Reproducibility Error | ≤1% |
| Minimum Working Volume | ≤200 µL |
| Maximum Single-Run Volume | 40 mL |
| Maximum Total Flow Rate | ≥180 mL/min |
| Supported Carriers | Liposomes, Lipid Nanoparticles (LNPs), Polymeric Microparticles, Micelles |
| Compatible Solvent Systems | Miscible and Immiscible Phases |
| Chip Compatibility | Customizable Microfluidic Chips |
| Control Interface | Integrated Touchscreen |
| Software | MPE Lab Microfluidic Control Suite (Lifetime Free Updates) |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Model | MPE-P1 |
| Application | Lipid Nanoparticle (LNP), Liposome, Polymeric Nanoparticle, Emulsion, and Inorganic Nanoparticle Preparation |
| Carrier Type | LNP |
| Regulatory Designation | GMP-Ready Process Development System |
| Control Interface | Integrated Touchscreen with Batch Record & Data Export Capability |
| Scalability | Pilot-Scale Continuous Manufacturing Platform |
| Particle Size Range | Down to <100 nm |
| Polydispersity Index (PDI) | <0.1 |
| Fluid Handling | Dual-Phase Precision Pumping (Phase A + Phase B) |
| Chip-Based Processing | Customizable Microchannel Architecture for Emulsification, Incubation, Size Control, and Secondary Processing |
| Compliance Framework | Engineered for alignment with FDA 21 CFR Part 11, ISO 13485, and ICH Q5A/Q5D principles |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MPE-P1 |
| Quotation | Upon Request |
| Payload Carrier Type | Lipid Nanoparticles (LNP) |
| Particle Size Range | <100 nm |
| Polydispersity Index (PDI) | <0.1 |
| Flow Control | Dual-Phase Precision Syringe Pumps + High-Pressure Conveying Pump |
| Chip Integration | Customizable Microfluidic Cartridge Architecture |
| Regulatory Alignment | Designed for GMP Process Development per ICH Q5A/Q5B, ISO 13485-aligned engineering controls |
| Data Integrity | Audit-trail-enabled batch records, CSV-compliant data export |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MPE-P1 |
| Carrier Type | Lipid Nanoparticle (LNP) |
| Pricing | Upon Request |
| Key Features | Integrated touchscreen HMI, batch record logging, exportable process data, high-flow/high-concentration LNP & liposome preparation, PDI < 0.1, particle size down to <100 nm |
| Compliance | Designed for GMP-aligned process development per ICH Q5A/Q5B, ISO 22442, and USP <1043> guidance |
| Software | Embedded control firmware with audit-trail-capable event logging (21 CFR Part 11–ready configuration available) |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Model | MPE-P1 |
| Carrier Type | Lipid Nanoparticles (LNP) |
| Application Scope | LNP, Liposome, Polymeric Nanoparticles (e.g., PLGA, PEG-PLGA), Emulsions, Inorganic/Organic Nanoparticles (e.g., Gold NPs) |
| Particle Size Range | <100 nm |
| Polydispersity Index (PDI) | <0.1 |
| Flow Control | Dual-channel precision syringe pumps with programmable flow rate ratio and total throughput |
| Chip Interface | Standardized high-pressure microfluidic chip mount (1/4"-28 UNF) |
| Data Logging | Batch-recorded process parameters (flow rates, pressure, temperature, time) with CSV export |
| Compliance Support | Designed for GLP-compliant process development |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MPE-P1 |
| Carrier Type | Lipid Nanoparticles (LNP) |
| Pricing | Upon Request |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MPE-P1 |
| Carrier Type | Lipid Nanoparticle (LNP) |
| Key Features | Integrated touchscreen interface, batch record logging, data export capability, high-concentration & high-flow-rate LNP/liposome processing, particle size control down to <100 nm, PDI < 0.1 |
| Compliance | Designed for GLP-compliant process development and scalable GMP-aligned manufacturing workflows |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MPE-P1 |
| Chip Material | Stainless Steel 316 (SS316) |
| Control Interface | Integrated Industrial Touchscreen HMI |
| Data Management | Batch Logging, CSV Export, Audit-Trail-Ready Configuration |
| Flow Rate Range | Up to 50 mL/min per inlet (system-dependent) |
| Operating Pressure | ≤ 120 bar |
| Chip Compatibility | Custom SS316 microfluidic chips with asymmetric staggered herringbone or hydrodynamic focusing geometries |
| Brand | Akoya |
|---|---|
| Origin | USA |
| Model | PhenoCycler-Fusion |
| Detection Modality | Cyclic Immunofluorescence (CyCIF) + In Situ Hybridization (ISH)-compatible |
| Pixel Resolution | 0.25 µm/pixel |
| Throughput | 5–100 tissue sections per week |
| Multiplex Capacity | >100 protein biomarkers per run |
| Imaging Speed | ~1 million cells imaged in ≤10 minutes |
| Compatible Analytes | Proteins and RNA in formalin-fixed paraffin-embedded (FFPE) and frozen tissue sections |
| Brand | Akoya |
|---|---|
| Origin | USA |
| Model | PhenoImager HT |
| Imaging Modes | Brightfield & Multispectral Fluorescence |
| Max Multiplexing | 9-plex fluorescence |
| Scan Speed | ~6 minutes per full-tissue section (7-color, 20× equivalent) |
| Objective Magnifications | 10×–40× |
| Autofocus | High-sensitivity dynamic autofocus |
| Excitation | Pulsed LED-based fluorescence excitation |
| Primary Application | Spatially resolved quantitative tissue biomarker analysis |
| Brand | Akoya |
|---|---|
| Origin | USA |
| Model | PhenoImager Fusion |
| Imaging Speed | Full-slide 7-color scan in ≤18 minutes |
| Spectral Range | 440–780 nm (tunable liquid crystal filter) |
| Objective Magnifications | 10×, 20×, 40× |
| Throughput | Up to 4 slides per automated run |
| Detection Modes | Multispectral fluorescence, brightfield RGB, conventional epi-fluorescence, optical density (OD)-based quantification |
| Compatibility | PhenoCycler™ integration (≥100-plex workflows), TMA analysis, .QPTIFF output |
| Regulatory Compliance | FDA 21 CFR Part 11–compliant image storage and audit trail |
| Brand | Akoya |
|---|---|
| Origin | USA |
| Model | Vectra 3 |
| Price Range | USD $420,000 – $700,000 |
| Application Domain | Multiplex Immunofluorescence (mIF) and Hematoxylin & Eosin (H&E) Digital Pathology |
| Imaging Modality | High-Resolution Multispectral Fluorescence Microscopy |
| Throughput | Up to 6 Tissue Sections per Run |
| Software Platform | inForm Advanced Image Analysis Suite |
| Brand | Akoya |
|---|---|
| Origin | USA |
| Model | Vectra Polaris |
| Imaging Modes | Brightfield & Multispectral Fluorescence |
| Max Multiplexing | 9-Color Fluorescence |
| Scan Speed | Full-slide 7-color fluorescence scan in ≤6 minutes (at 20× objective) |
| Objective Magnifications | 10×, 20×, 40× |
| Autofocus | High-sensitivity adaptive autofocus with Z-stack optimization |
| Excitation | Pulsed LED-based fluorescence excitation |
| Spectral Resolution | <5 nm FWHM |
| Pixel Size (at 20×) | 0.25 µm/pixel |
| Field of View | 1.3 mm × 1.0 mm per frame (20×) |
| Data Output Format | .qptiff (Quantitative Pathology TIFF), .czi, .ome.tiff |
| Software Platform | inForm Advanced Image Analysis Suite v2.7+ |
| Brand | Cytiva |
|---|---|
| Origin | Sweden |
| Model | ÄKTA oligosynt™ |
| Type | Fully Automated Solid-Phase Oligonucleotide Synthesizer |
| Synthesis Scale Range | 40 nmol to 1 µmol |
| Reagent Delivery Precision | ≤2% RSD |
| System Footprint | 600 × 650 × 700 mm (W × D × H) |
| Integrated Sensor Suite | Pressure, Mass Flow, Temperature, UV Absorbance, Conductivity |
| Compliance | Designed for GLP/GMP-aligned process development environments |
| Brand | Cytiva |
|---|---|
| Origin | Sweden |
| Model | AKTA pcc |
| Purification Principle | Affinity Chromatography (AC) |
| Detector Type | Xenon Lamp UV-Vis Detector |
| Detection Capabilities | UV Absorbance (280 nm, 254 nm), Conductivity, pH, Temperature, Pressure |
| Column Positions | 3 or 4 |
| Post-Loading Wash (PLW) Functionality | Yes |
| Regulatory Compliance Support | FDA 21 CFR Part 11, EU Annex 11, GLP/GMP-ready software architecture |
| Brand | Cytiva |
|---|---|
| Origin | Sweden |
| Model | 28-9062-61 |
| Configuration | Pre-sterilized, disposable flow path system |
| Flow Rate Range | 50 mL/min to 510 L/hr |
| Column Diameter Compatibility | 70 mm – 450 mm |
| Regulatory Compliance | USP Class VI biocompatible materials |
| Manufacturing Environment | ISO 8 cleanroom packaging |
| Documentation | Full traceability, batch-specific validation dossiers, GMP-aligned support files |
| Brand | Bioaces |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Akwa®Cyte |
| Pricing | Upon Request |
| Brand | ALISN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | CNT 1000plus |
| Cooling Method | Compressor-based refrigeration |
| Air Circulation | Natural convection |
| Temperature Range | −10 °C to +90 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Uniformity (at 37 °C, empty chamber) | ±0.1 °C |
| Chamber Volume | 1000 L |
| Display | 7-inch full-color TFT touch screen |
| Control System | PID + fuzzy logic algorithm |
| Data Logging Capacity | 10-year continuous temperature recording (non-editable, exportable via USB flash drive) |
| Audit Trail | 16,000 entries (user actions & alarms, non-modifiable, exportable) |
| User Management | Up to 5 configurable accounts with role-based permissions |
| Multi-point Temperature Calibration | Yes |
| Compressor | SECOP (Danfoss Group), Germany |
| Condenser Fan | EBM-Papst, Germany |
| Refrigerant | Environmentally compliant (R290/R600a blend) |
| Insulation | Monolithic polyurethane foam injection (≥80 mm thickness) |
| Power Supply | AC 220 V, 50/60 Hz |
| Heating Power | 3200 W |
| Operating Ambient | 5–35 °C (optimal: 23±2 °C) |
| Safety Features | Over-temperature alarm, door-open alert, compressor overpressure protection, leakage current protection, sensor fault detection, auto-restart after power failure |
| Brand | ALISN |
|---|---|
| Origin | Shanghai, China |
| Model | CNT 150plus |
| Cooling Method | Compressor-based refrigeration |
| Air Circulation | Natural convection |
| Temperature Range | −10 °C to +90 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Uniformity (at 37 °C) | ±0.1 °C |
| Chamber Volume | 150 L |
| Compressor | SECOP (Danfoss Group), Germany |
| Condenser Fan | EBM-Papst, Germany |
| Insulation | Monolithic polyurethane foam injection |
| Display | 7-inch full-color TFT touch screen |
| Control System | PID + fuzzy logic algorithm |
| Data Logging | ≥10 years of uneditable timestamped temperature records (exportable via USB) |
| Audit Trail | 16,000+ immutable operation and alarm entries (USB export) |
| User Management | 5 configurable user accounts with role-based permissions |
| Communication Interfaces | RS232, RS485, USB |
| Language Options | English / Chinese |
| Power Supply | AC 220 V, 50/60 Hz |
| Safety Features | Over-temperature alarm, door-open alert, compressor overpressure protection, leakage current protection, sensor fault detection, auto-restart after power recovery |
| Brand | ALISN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CNT 460plus |
| Price Range | USD 7,000 – 14,000 (FOB Shanghai) |
| Cooling Method | Hermetic Compressor Cooling |
| Air Circulation | Forced Convection |
| Temperature Range | −10 °C to +90 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Uniformity (at 37 °C) | ±0.3 °C (typical), ±0.8 °C (max across chamber) |
| Chamber Volume | 460 L |
| Display | 7-inch Full-Color TFT Touchscreen |
| Control Algorithm | PID with Fuzzy Logic Compensation |
| Data Logging | Internal non-volatile memory (3 years @ 1-min intervals) |
| Audit Trail | 16,000 entries (user actions, alarms, system events) |
| User Management | 5 configurable roles with granular permission levels (e.g., operator, technician, administrator) |
| Temperature Calibration | Multi-point offset correction (up to 9 points) |
| Compressor | SECOP (Danfoss Group), hermetic rotary type |
| Condenser Fan | EBM-Papst, EC brushless DC motor |
| Refrigerant | R134a (ODP = 0, GWP = 1,430) |
| Insulation | Monolithic polyurethane foam (≥80 mm thickness, closed-cell, density ≥38 kg/m³) |
| Door Design | Dual-glass door (outer tempered safety glass, inner laminated low-E glass), silicone-sealed viewing window (Ø50 mm port on right side) |
| Communication Interfaces | RS-232, RS-485, USB-B (host mode) |
| Language Support | English / Chinese toggle |
| Power Supply | AC 220 V ±10%, 50/60 Hz |
| Heating Capacity | 2.3 kW |
| Ambient Operating Conditions | 5–35 °C, 40–80% RH (optimal: 23 ±2 °C, 50 ±5% RH) |
| Safety Certifications | CE-marked per IEC 61010-1:2010, EN 61326-1:2013 (EMC), compliant with ISO 13485 design control principles for medical device support applications |
| Brand | ALISN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CNT 760plus |
| Price Range | USD 7,000 – 14,000 (FOB Shanghai) |
| Cooling Method | Hermetic Compressor Cooling |
| Air Circulation | Forced Convection |
| Temperature Range | −10 °C to +90 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Uniformity (at 37 °C) | ±0.3 °C |
| Chamber Volume | 760 L |
| Display | 7-inch Full-Color TFT Touchscreen |
| Control Algorithm | PID + Fuzzy Logic Hybrid Control |
| Data Logging Capacity | 10-year continuous recording (non-editable, USB exportable) |
| Audit Trail | 16,000 entries (user actions & alarms, timestamped, immutable export via USB) |
| User Management | 5 configurable roles with granular permission levels |
| Temperature Calibration | Multi-point offset correction (up to 12 points) |
| Compressor | SECOP (Danfoss Group), hermetically sealed |
| Condenser Fan | EBM-Papst (Germany) |
| Refrigerant | R134a (ozone-friendly, low-GWP) |
| Insulation | Monolithic polyurethane foam (≥80 mm thickness, closed-cell, CFC-free) |
| Power Supply | AC 220 V ±10%, 50/60 Hz |
| Heating Power | 3200 W |
| Operating Ambient | 5–35 °C (optimal: 23–27 °C, RH ≤70%) |
| Safety Features | Over-temperature cutoff, door-open alarm, compressor high-pressure protection, leakage current protection, sensor fault detection, auto-restart after power recovery |
| Interface Ports | RS232, RS485, USB-B (data export & firmware update) |
| Door Design | Dual-door structure with tempered glass inner door (Ø50 mm silicone port on right side wall) |
| Standard Shelving | 2 stainless steel shelves (3 optional) |
| Energy Efficiency | ≥40% lower power consumption vs. conventional incubators under identical load and ambient conditions |