Life Science Instruments
Filter
Showing 2611–2640 of 2745 results
| Brand | ZHICHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | ZXDR-2430 |
| Pricing | Upon Request |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZXDR-2800 |
| Display | 7-inch 800×480-pixel 65K-color touchscreen |
| Control System | PID microprocessor-based environmental scanning controller |
| Temperature Range | Ambient +5°C to 65°C |
| Temp. Resolution | ≤±0.1°C |
| Temp. Uniformity | ≤±0.3–1.0°C |
| Temp. Stability (Fluctuation) | ≤±0.1°C |
| Chamber Volume | 800 L |
| Internal Dimensions (W×D×H) | 840×800×1200 mm |
| External Dimensions (W×D×H) | 990×905×1690 mm |
| Net Weight | 168 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Heating Power | 1500 W |
| Air Circulation | Forced convection with optimized micro-airflow duct design |
| Door | Double-layer door with inner safety glass panel |
| Safety Features | Triple independent protection — leakage/overcurrent cutoff, backup thermal cut-off, adjustable overtemperature limiter, self-diagnostic alarm system |
| Programmability | 9-segment / 18-step programmable cycle with ramp-hold capability (max. 999.9 min per segment) |
| Compliance | Designed for GLP-compliant laboratories |
| Optional Interfaces | RS-232 serial port |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5090 |
| Pricing | Upon Request |
| Capacity | 90 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Programmability | 10 segments / 18 steps |
| Segment Duration | 1–999 minutes per step |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward forced convection from bottom heater |
| Internal Chamber Dimensions (W×D×H) | 400 × 445 × 485 mm |
| External Dimensions (W×D×H) | 590 × 575 × 865 mm |
| Net Weight | 55 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1100 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Data Interface | RS-232 port |
| Optional Output | Embedded thermal microprinter |
| Insulation | Double-wall insulated chamber with outer door glass compliant with EN 61000-3-2 and EN 61000-6-3 safety standards |
| Interior Material | Mirror-finish stainless steel |
| Door | Tempered double-glazed inner door |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5140 |
| Quotation | Upon Request |
| Capacity | 140 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward convection from bottom-mounted heater |
| Programming | 10 segments / 18 steps (Segment 0 = pre-set timing |
| Step Duration | 1–999 minutes per step |
| Internal Dimensions (W×D×H) | 500×470×600 mm |
| External Dimensions (W×D×H) | 690×600×980 mm |
| Net Weight | 80 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1600 W |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal mini-printer |
| Insulation | High-efficiency mineral wool with double-wall construction |
| Interior Material | Mirror-finish stainless steel |
| Door | Double-glazed tempered glass with outer layer compliant with EN 61000-3-2 safety standards |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5250 |
| Quotation | Upon Request |
| Capacity | 250 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Mode | Vertical Forced Convection from Bottom |
| Programmability | 10 Segments / 18 Steps |
| Time per Step | 1–999 min |
| Interior Dimensions (W×D×H) | 600 × 550 × 750 mm |
| External Dimensions (W×D×H) | 790 × 680 × 1220 mm |
| Net Weight | 108 kg |
| Power Rating | 2100 W |
| Voltage/Frequency | AC 220 V, 50/60 Hz |
| Safety Features | Independent Over-Temperature Protection (adjustable 30–80°C), Overheat Prevention Device, Leakage Current & Overcurrent Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Connectivity | RS-232 Interface, Embedded Micro-Printer Output |
| Interior Material | Mirror-Finish Stainless Steel |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Insulation | High-Efficiency Ceramic Fiber with Triple-Layer Door Sealing |
| Compliance | Designed per IEC 61010-1 (Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use) |
| Brand | ZhiCheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXFD-A5430 |
| Pricing | Upon Request |
| Capacity | 430 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward convection from bottom-mounted blower |
| Programming | 10 segments / 18 steps (Segment 0 = pre-set timing |
| Step Duration | 1–999 minutes per step |
| Internal Dimensions (W×D×H) | 700 × 650 × 950 mm |
| External Dimensions (W×D×H) | 890 × 780 × 1420 mm |
| Net Weight | 170 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 3100 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms, self-diagnostic system |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal microprinter |
| Insulation | High-efficiency ceramic fiber + double-wall construction |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Double-glazed tempered glass with outer layer compliant with EN 61000-3-2 safety standards |
| Heating System | Full-perimeter, bottom-mounted heating elements with 360° radiant and convective heat distribution |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5600 |
| Pricing | Upon Request |
| Capacity | 600 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward from bottom |
| Programmability | 10 segments / 18 steps (Segment 0 = pre-set timer |
| Step Duration | 1–999 minutes per step |
| Interior Dimensions (W×D×H) | 800 × 780 × 1000 mm |
| External Dimensions (W×D×H) | 990 × 910 × 1470 mm |
| Net Weight | 210 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 3700 W |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Features | Independent over-temperature protection (adjustable 30–80°C), independent overheat prevention device, leakage current & overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Connectivity | RS-232 interface, embedded micro-printer output |
| Insulation | Dual-layer door with outer tempered glass compliant with EN 61000-3-2 and EN 60529 IP20 safety requirements |
| Interior Material | Mirror-finish stainless steel |
| Door | Double-glazed tempered glass inner door |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXGP-A2050 |
| Quotation | Available Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±1.0°C (at 37°C) |
| Temperature Fluctuation | ≤ ±0.5°C |
| Chamber Capacity | 50 L |
| Internal Dimensions (W×D×H) | 350 × 350 × 410 mm |
| External Dimensions (W×D×H) | 510 × 475 × 780 mm |
| Net Weight | 35 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 510 W |
| Control System | Fuzzy Logic Microprocessor |
| Display | LCD |
| Air Circulation | Top-mounted micro-airflow circulation |
| Door Configuration | Dual-door (outer insulated door + inner tempered glass observation door) |
| Programmability | 10 segments / 18 steps, segment time adjustable from 1–999 minutes |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Data Interface | RS-232 serial port |
| Optional Output | Embedded thermal mini-printer |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Interior Material | Mirror-finish 304 stainless steel |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXGP-A2080 |
| Quotation | Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±1.0°C (at 37°C) |
| Temperature Fluctuation | ≤ ±0.5°C |
| Chamber Capacity | 80 L |
| Internal Dimensions (W×D×H) | 400 × 400 × 500 mm |
| External Dimensions (W×D×H) | 560 × 525 × 870 mm |
| Net Weight | 45 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 810 W |
| Control Logic | Fuzzy Logic Algorithm |
| Display | LCD |
| Air Circulation | Top-mounted micro-airflow system |
| Door Configuration | Dual-door (outer insulated door + inner tempered glass observation door) |
| Programming Capability | 10 segments / 18 steps, step duration 1–999 minutes |
| Safety Systems | Independent over-temperature protection (adjustable 30–80°C), independent overheat prevention device, leakage current & overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Data Interface | RS-232 serial port |
| Optional Output | Embedded thermal printer |
| Additional Functions | Auto-start/auto-stop, clock display, power recovery mode, parameter memory with password protection, temperature display calibration, monitoring timer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXGP-A2160 |
| Pricing | Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±1.0°C (at 37°C) |
| Temperature Fluctuation | ≤ ±0.5°C |
| Chamber Capacity | 160 L |
| Interior Dimensions (W×D×H) | 500 × 500 × 650 mm |
| External Dimensions (W×D×H) | 660 × 625 × 1020 mm |
| Net Weight | 78 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1210 W |
| Door Configuration | Dual-door (outer insulated door + inner tempered glass observation door) |
| Air Circulation | Top-mounted micro-airflow circulation |
| Control Logic | Fuzzy logic algorithm |
| Programming Capability | 10 segments / 18 steps (Segment “0” = pre-set standby |
| Step Duration Range | 1–999 minutes per step |
| Display | LCD with real-time parameter readout |
| Communication Interface | RS-232 |
| Data Output | Embedded thermal mini-printer |
| Safety Systems | Independent overtemperature cutoff (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms, self-diagnostic monitoring timer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | ZXGP-A2270 |
| Quotation | Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±1.0°C at 37°C |
| Temperature Fluctuation | ≤±0.5°C |
| Programming Capacity | 10 segments / 18 steps |
| Time per Step | 1–999 minutes |
| Display | LCD |
| Air Circulation | Top-mounted micro-airflow system |
| Chamber Volume | 270 L |
| Interior Dimensions (W×D×H) | 600×600×750 mm |
| External Dimensions (W×D×H) | 760×725×1120 mm |
| Net Weight | 115 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1800 W |
| Safety Features | Independent overtemperature cutoff (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power-failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal printer |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Interior Material | Mirror-finish stainless steel |
| Door Configuration | Dual-door design with inner tempered glass observation window |
| Control Algorithm | Fuzzy logic control |
| Operating Ambient | 5–35°C |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | ZXJD-A1160 |
| Pricing | Upon Request |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | ZXJD-A1270 |
| Pricing | Upon Request |
| Capacity | 270 L |
| Temperature Range | 4–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Air Circulation | Forced Convection (Turbine Fan) |
| Door Configuration | Dual-layer Door with Tempered Glass Inner Window |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 850 W |
| Net Weight | 130 kg |
| Internal Dimensions (W×D×H) | 600 × 600 × 750 mm |
| External Dimensions (W×D×H) | 730 × 740 × 1460 mm |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Safety Features | Independent Over-Temperature Prevention (30–80 °C adjustable), Independent Overheat Protector, Leakage & Overcurrent Circuit Breaker, Refrigeration Overload Protection |
| Programmability | Up to 10 segments / 18 steps, step duration 1–999 min |
| Humidity Control | Optional dual-mode (dry-wet or constant-humidity operation) |
| Water Supply System | Dual-stage automatic reservoir with self-filling design |
| Additional Options | Embedded thermal printer, RS-232 communication interface |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | ZXJD-A1430 |
| Pricing | Upon Request |
| Capacity | 430 L |
| Temperature Range | 4–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Control Mode | Fuzzy Logic |
| Programming | 10 segments × 18 steps |
| Step Duration | 1–999 min per step |
| Door Type | Dual-layer door with tempered glass observation window (inner insulated glass door) |
| Air Circulation | Forced convection with turbine fan |
| Inner Chamber Material | Mirror-finish stainless steel |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1200 W |
| Net Weight | 108 kg |
| Internal Dimensions (W×D×H) | 700 × 645 × 950 mm |
| External Dimensions (W×D×H) | 830 × 785 × 1660 mm |
| Safety Features | Independent over-temperature prevention (adjustable 30–80 °C), independent overheat protector, leakage & overcurrent circuit breaker, refrigeration overload protection |
| Auxiliary Functions | Monitoring timer, power failure recovery, parameter memory, temperature display calibration, Φ50 mm test port |
| Optional | Built-in refrigeration (air-cooled R134a, power-controlled) |
| Humidity Control | Available in dry-wet and constant-humidity configurations (model-specific) |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXJP-A0150 |
| Pricing | Upon Request |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXJP-A0230 |
| Pricing | Upon Request |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXJP-A0430 |
| Pricing | Upon Request |
| Capacity | 430 L |
| Temperature Range | −10 to 65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Humidity Range | 40–95 %RH |
| Humidity Resolution | 0.1 %RH |
| Humidity Fluctuation | ≤ ±2 %RH |
| Humidity Uniformity | ≤ ±6 %RH |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Air Circulation | Forced Convection (Turbine Fan) |
| Door Design | Double-Layer Door with Insulated Inner Glass View Window |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1650 W |
| Net Weight | 175 kg |
| Internal Dimensions (W×D×H) | 700 × 650 × 950 mm |
| External Dimensions (W×D×H) | 850 × 890 × 1650 mm |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Dual independent overtemperature protection (adjustable 30–80 °C), dry-run alarm, sensor fault detection, power failure alarm, leakage & overcurrent circuit breaker, refrigeration overload protection |
| Optional Interfaces | RS-232 serial port, embedded thermal printer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXJP-A1150 |
| Quotation | Upon Request |
| Capacity | 150 L |
| Temperature Range | 0–65 °C |
| Temp. Resolution | 0.1 °C |
| Temp. Uniformity | ≤±1 °C (at 37 °C) |
| Temp. Fluctuation | ≤±0.5 °C |
| Humidity Range | 40–95 %RH |
| Humidity Resolution | 0.1 %RH |
| Humidity Fluctuation | ≤±2 %RH |
| Humidity Uniformity | ≤±6 %RH |
| Control Logic | Fuzzy Logic |
| Display | LCD |
| Air Circulation | Forced Convection (Turbo Fan) |
| Door Design | Double-layer Door with Internal Tempered Glass View Window |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 800 W |
| Net Weight | 105 kg |
| Interior Dimensions (W×D×H) | 500 × 460 × 650 mm |
| Exterior Dimensions (W×D×H) | 640 × 700 × 1350 mm |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Dual independent overtemperature cutoffs (adjustable 30–80 °C), leakage current protection, overcurrent trip, refrigeration overload protection, low-water alarm, sensor fault detection, power failure alarm, upper/lower limit deviation alarms |
| Programmability | 10 segments / 18 steps, step duration 1–999 min, ramp-hold profiles, cycle repeat function |
| Humidification System | Secondary reservoir auto-refill design, frost-free refrigeration (R134a) |
| Optional Accessories | Embedded thermal printer, RS-232 serial interface |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXJP-A1230 |
| Pricing | Upon Request |
| Capacity | 230 L |
| Temperature Range | 0–65 °C |
| Temp. Resolution | 0.1 °C |
| Temp. Uniformity | ≤ ±1 °C (at 37 °C) |
| Temp. Fluctuation | ≤ ±0.5 °C |
| Humidity Range | 40–95 %RH |
| Humidity Resolution | 0.1 %RH |
| Humidity Fluctuation | ≤ ±2 %RH |
| Humidity Uniformity | ≤ ±6 %RH |
| Control Logic | Fuzzy Logic |
| Display | LCD |
| Air Circulation | Forced convection with turbine fan |
| Door Design | Double-layer door with internal tempered glass window |
| Power Supply | AC 220 V, 50/60 Hz |
| Power Consumption | 1000 W |
| Net Weight | 130 kg |
| Internal Dimensions (W×D×H) | 600 × 550 × 700 mm |
| External Dimensions (W×D×H) | 740 × 790 × 1400 mm |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Systems | Independent overtemperature cut-off (adjustable 30–80 °C), leakage current protection, overcurrent trip, compressor overload protection, low-water-level alarm, sensor fault detection, power-failure recovery, parameter password lock |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXJP-A1430 |
| Pricing | Upon Request |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXMP-A1150 |
| Pricing | Upon Request |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXMP-A1230 |
| Pricing | Upon Request |
| Capacity | 230 L |
| Temperature Range | 0–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Humidity Range | 40–98 %RH |
| Humidity Resolution | 0.1 %RH |
| Humidity Fluctuation | ≤ ±3 %RH |
| Humidity Uniformity | ≤ ±5 %RH |
| Control Method | Fuzzy Logic Algorithm |
| Display | LCD |
| Air Circulation | Forced Convection with Turbo Fan |
| Door Design | Double-layer Door with Insulated Inner Tempered Glass |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1000 W |
| Internal Dimensions (W×D×H) | 600 × 550 × 700 mm |
| External Dimensions (W×D×H) | 740 × 790 × 1400 mm |
| Net Weight | 130 kg |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Refrigerant | R134a |
| Defrosting | Frost-Free Operation |
| Water Supply | Dual-stage automatic reservoir system |
| Safety Systems | Independent overtemperature cut-off (adjustable 30–80 °C), independent overheat prevention device, leakage & overcurrent circuit breaker, compressor overload protection |
| Diagnostic Alerts | Low water level, power failure, sensor fault, upper/lower temperature limit violation |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region Category | Domestic (China) |
| Model | ZXMP-A1430 |
| Pricing | Upon Request |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZXRD-7080 |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Chamber Volume | 80 L |
| Internal Dimensions (W×D×H) | 375×375×550 mm |
| External Dimensions (W×D×H) | 565×505×930 mm |
| Power Supply | AC 200 V, 50/60 Hz |
| Rated Power | 1500 W |
| Net Weight | 58 kg |
| Airflow Method | Rear horizontal forced convection |
| Display | LED digital display |
| Shelf Capacity | 2 standard shelves (up to 4 optional) |
| Timer Range | 1 min – 99 h 59 min |
| Over-Temperature Protection | Triple-stage safety cutoff (audible/visual alarm, auto-heater shutdown, auto-recovery on power restoration) |
| Interior Material | Mirror-finish stainless steel |
| Shelf Material | Electropolished stainless steel |
| Door | Tempered glass with sealed insulation |
| Calibration Offset Adjustment | Built-in digital temperature correction function |
| Operating Ambient | 5–35°C |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXRD-7140 |
| Price | Upon Request |
| Airflow | Rear horizontal forced convection |
| Display | LED digital interface |
| Ambient Temperature Range | 5–35 °C |
| Temperature Control Range | Ambient +5 °C to 300 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1 °C |
| Chamber Capacity | 140 L |
| Interior Dimensions (W×D×H) | 450 × 450 × 685 mm |
| Exterior Dimensions (W×D×H) | 640 × 580 × 1065 mm |
| Net Weight | 80 kg |
| Power Consumption | 2100 W |
| Electrical Supply | AC 200 V, 50/60 Hz |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Tempered glass with stainless steel frame |
| Heating System | Large-area embedded panel heater |
| Safety Features | Triple overtemperature protection (audible/visual alarm, auto-heater cutoff, auto-recovery on power resumption) |
| Calibration | Built-in temperature offset adjustment |
| Timer Range | 1 min – 99 h 59 min with end-of-cycle audible alert |
| Data Retention | Parameter memory function for repeat protocols |
| Key Features | 10-segment / 18-step programmable temperature profiling |
|---|---|
| Temperature range | ambient +5°C to 200°C |
| Temperature resolution | 0.1°C |
| Temperature uniformity | ≤±2.5% at max operating temperature |
| Temperature fluctuation | ≤±1°C |
| Chamber volume | 30 L |
| Interior dimensions (W×D×H) | 300×300×340 mm |
| Power | 600 W, AC 220 V, 50/60 Hz |
| Net weight | 40 kg |
| Origin | Shanghai, China |
| Manufacturer | Zhicheng Instrument Co., Ltd. |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXRD-A5055 |
| Pricing | Upon Request |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Rear Horizontal Forced Convection |
| Ambient Temperature Range | 5–35 °C |
| Temperature Range | Ambient +5 to 200 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1 °C |
| Programming Capacity | 10 Segments / 18 Steps |
| Time per Step | 1–999 min |
| Chamber Volume | 55 L |
| Interior Dimensions (W×D×H) | 330 × 360 × 450 mm |
| Exterior Dimensions (W×D×H) | 520 × 490 × 830 mm |
| Net Weight | 50 kg |
| Power Rating | 800 W |
| Voltage/Frequency | AC 220 V, 50/60 Hz |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Systems | Independent overtemperature cut-off (adjustable 30–80 °C), independent overheat prevention device, leakage current & overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Data Interface | RS-232 port |
| Optional Output | Embedded thermal mini-printer |
| Insulation | High-efficiency ceramic fiber insulation |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Double-layer tempered glass with outer layer compliant with EN 61000-3-2 safety standards |
| Heating Architecture | Full-perimeter rear-mounted heating elements with 360° air circulation ducting |
| Diagnostic Features | Auto-diagnostic boot-up, parameter memory with password protection, temperature display calibration function, auto-restart after power recovery |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXRD-A5110 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Rear Horizontal Blowing |
| Ambient Temperature Range | 5–35 °C |
| Temperature Range | Ambient +5 to 200 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1 °C |
| Programming Capacity | 10 Segments / 18 Steps |
| Time per Step | 1–999 min |
| Chamber Volume | 110 L |
| Interior Dimensions (W×D×H) | 420 × 400 × 650 mm |
| External Dimensions (W×D×H) | 610 × 530 × 1030 mm |
| Net Weight | 61 kg |
| Power Consumption | 1300 W |
| Supply Voltage | AC 220 V, 50/60 Hz |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80 °C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Connectivity | RS-232 interface, embedded micro-printer output |
| Insulation | Double-wall construction with high-efficiency mineral wool insulation |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Tempered double-glazed viewing window compliant with EN 61000-6-3 and EN 61000-6-4 safety requirements |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXRD-A5210 |
| Pricing | Upon Request |
| Capacity | 210 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Horizontal forced convection from rear wall |
| Programming | 10 segments (0 = pre-set standby |
| Step Duration | 1–999 minutes per step |
| Internal Chamber Dimensions (W×D×H) | 500 × 550 × 750 mm |
| External Dimensions (W×D×H) | 690 × 680 × 1220 mm |
| Net Weight | 98 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1700 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Systems | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Data Interface | RS-232 port |
| Optional Output | Embedded thermal mini-printer |
| Insulation | High-efficiency multilayer ceramic fiber insulation |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Double-glazed tempered glass with outer pane compliant with EN 61000-6-3 and EN 61000-6-4 safety standards |
| Heating Architecture | Full-perimeter rear-wall heating array with microprocessor-scanned thermal feedback loop |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXSD-1160 |
| Quotation | Upon Request |
| Temperature Control Range | 4–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤±1 °C |
| Temperature Fluctuation | ≤±0.5 °C |
| Chamber Volume | 160 L |
| Internal Dimensions (W×D×H) | 500×500×650 mm |
| External Dimensions (W×D×H) | 630×640×1360 mm |
| Net Weight | 98 kg |
| Power Supply | AC 200 V, 50/60 Hz |
| Rated Power | 700 W |
| Air Circulation | Forced Convection |
| Display | LED |
| Door Type | Double-layer Door with Observation Window (Inner Insulated Glass Door) |
| Defrost Mode | Automatic |
| Ambient Operating Temperature | 5–35 °C |
| Timer Range | Up to 100 h |
| Shelving | 2 Standard Stainless Steel Adjustable Shelves (Expandable to 4) |
| Interior Material | Nano-coated Antibacterial Stainless Steel |
| Lighting | Integrated LED Illumination |
| Power Outlet | Built-in 220 V Socket Inside Chamber |
| Temperature Calibration | Built-in Digital Offset Adjustment |
| Safety Features | Dual-limit Temperature Tracking with Audible/Visual Alarm and Automatic Heating/Cooling Cut-off |
| Recovery Function | Auto-restart After Power Interruption |
| Environmental Compliance | CFC-free Refrigeration System |