Lubricating Oil Tester
Filter
Showing 151–180 of 182 results
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | LaserNet 230 |
| Detection Capabilities | Simultaneous particle counting, ferrous particle quantification (ppm & size distribution), and morphology-based wear debris classification |
| Particle Size Range (counting) | 4–100 µm |
| Max. Particle Concentration | 5,000,000 particles/mL |
| Viscosity Range | 15–320 cSt (no dilution required) |
| Soot Tolerance | up to 2% (w/w) |
| Counting Uncertainty | <2% (statistical repeatability) |
| Standards Compliance | ISO 4406, NAS 1638, SAE AS4059, ASTM D6786, NAVAIR 01-1A-17, GOST, HAL |
| Imaging Resolution | ≥20 µm for automated morphology classification |
| Ferrous Sensor Sensitivity | Sub-ppm detection limit for ferrous concentration |
| Analysis Time per Sample | ~4 minutes |
| Data Integration | Native export to SpectroTrack LIMS and AMS Asset Management System |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | MicroLab 30 |
| Detection Capabilities | Elemental Analysis (via Rotating Disc Electrode Atomic Emission Spectrometry), Infrared Spectroscopy, Kinematic Viscosity (at 40 °C and 100 °C), Acid Number, Oxidation, Nitration, Soot, Glycol, Water, Particle Count (optional module), Additive & Contaminant Elemental Profiling |
| Compliance | ASTM D7417 (Standard Test Method for Determination of Oxidation, Nitration, Soot, Glycol, Water, and Elemental Composition in Used Lubricating Oils Using Fourier Transform Infrared (FTIR) Spectroscopy, Rotating Disc Electrode Atomic Emission Spectrometry (RDE-AES), and Kinematic Viscosity) |
| Software | Embedded Expert System with >10,000 rule-based diagnostic scripts |
| Sample Throughput | ~15 minutes per sample (full suite of ASTM D7417–compliant tests) |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Manufacturer | Yes |
| Import Status | Imported |
| Model | Microlab 40 |
| Product Category | Laboratory Instrument |
| Detection Capabilities | Elemental Analysis (Wear Metals, Contaminants), Particle Counting, Viscosity, Oxidation/Nitration/Soot/Total Base Number (TBN), Glycol & Water Detection |
| Compliance | ASTM D6595 (Rotating Disc Electrode Emission Spectrometry), ISO 4406 (Particle Contamination Code), ASTM D2440 (TBN), ASTM D445 (Kinematic Viscosity), ASTM D7690 (On-Site Viscosity), FDA 21 CFR Part 11–ready Software Architecture |
| Sample Throughput | ≤15 min per sample (full suite of tests) |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | Microlab 40 |
| Application | Elemental Analysis, Particle Counting, Viscosity, Oxidation/Nitration/Total Base Number (TBN), Coolant & Water Contamination, Soot Measurement |
| Compliance | ASTM D6595 (Rotary Disc Electrode Emission Spectrometry), ASTM D7690 (Automatic Particle Counting), ASTM D445 (Kinematic Viscosity), ASTM D2896/D4739 (TBN), ISO 4406:2017 (Particle Contamination Code) |
| Configuration | Benchtop, Integrated Lab-Scale Analyzer for On-Site or Centralized Lubricant Diagnostics |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | MiniLab 153 |
| Product Type | Laboratory Instrument |
| Test Capabilities | Wear Debris Analysis, Contamination Monitoring, Oxidation & Degradation Assessment |
| Connectivity | Emerson AMS Machinery Health Manager Integration |
| Compliance Framework | Supports ISO 4406 (fluid cleanliness), ASTM D6595 (rotary piston pump wear debris analysis), ASTM D7690 (on-site oil analysis validation), GLP/GMP-aligned data audit trail |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | MiniLab 153 |
| Detection Capabilities | Elemental Analysis (ICP-OES), Particle Counting & Ferrography, Viscosity, Fluid Health Assessment (Oxidation, Nitration, Sulfation, TAN, TBN, Water Content) |
| Standards Compliance | ASTM D6595, D7596, D8092, D7889 |
| Analysis Time | ≤20 minutes per sample |
| Sample Throughput | Full suite of 4 test modules in single workflow |
| Vector-Based Diagnostic Framework | Tri-Vector Analysis (Wear, Contamination, Fluid Degradation) |
| Control System | TDC (Tri-Vector Diagnostic Controller) |
| Operating Environment | Industrial field site (non-laboratory) |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | Minilab 153 |
| Application Scope | In-Field Lubricant Analysis |
| Detection Capabilities | Elemental Composition (24 standard elements, up to 31), Particle Contamination, Oxidation/Nitration/Sulfation Indices, Viscosity Trend Proxy, Additive Depletion Assessment |
| Compliance Framework | ASTM D6595 (Rotating Disc Electrode Atomic Emission Spectrometry), ISO 4406 (Particle Count Code), ISO 21785 (Oil Health Parameters), Compatible with Emerson AMS Machinery Health Manager |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | Minilab 153 |
| Detection Capabilities | Elemental Analysis (24 elements standard, up to 31), Particle Counting, Ferrous Particle Quantification (ppm) & Size Distribution, Kinematic Viscosity at 40 °C, TAN/TBN, Oxidation/Sulfation/Nitration, Water Content, Glycol, Soot |
| Software Platform | TruVu 360 Oil Intelligence Platform |
| Compliance | Designed for ASTM D6595 (rotary disc electrode emission spectroscopy), ISO 4406 (particle contamination), ASTM D2440 (TAN), ASTM D974 (TBN), ASTM D2896 (TBN), ASTM D7945 (viscosity), and supports GLP/GMP audit trails per FDA 21 CFR Part 11 requirements |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | MiniVisc 3000 Series (10–350 cSt @ 40 °C) / MiniVisc 3050 Series (1–700 cSt @ 40 °C) |
| Measurement Principle | Gravity-driven capillary flow in split-cell microchannel |
| Temperature Control | 40 °C ± 0.1 °C (PID-regulated) |
| Sample Volume | 60 µL |
| Power | Rechargeable Li-ion battery (≥6 h runtime) |
| Display | Integrated high-resolution touchscreen |
| Weight | 1.8 kg |
| Dimensions | 152 × 127 × 203 mm (H × W × L) |
| Compliance | ASTM D445, ISO 3104, IP 71 |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | N99903 |
| Application | Elemental analysis of engine coolants (antifreeze), lubricating oils, fuel oils, and greases |
| Measurement principle | Rotating Disc Electrode (RDE) atomic emission spectroscopy |
| Analysis time | ≤30 seconds per sample |
| Sample preparation | None required |
| Consumables | No carrier gas required |
| Element count | Up to 13 elements simultaneously quantifiable in coolant matrices |
| Compliance | Designed for ASTM D6595-compliant operation |
| Instrument class | Benchtop laboratory spectrometer |
| Regulatory context | Supports GLP/GMP data integrity requirements via audit-trail-capable software |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | 120C |
| Application | Elemental Analysis of Lubricating Oils, Fuels, Coolants, and Industrial Fluids |
| Compliance | ASTM D6595, ASTM D6728 |
| Sample Volume | 2 mL |
| Analysis Time | ≤30 s per sample |
| Elements Quantified | Up to 31 metals |
| Detection Limits | Sub-ppm for most elements |
| Sample Preparation | Solvent-free, no dilution required |
| Configuration | Benchtop laboratory spectrometer |
| Intended Use | Wear debris monitoring, additive package verification, contamination screening |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | SpectrOil 120C |
| Detection Principle | Rotating Disc Electrode (RDE) Atomic Emission Spectrometry |
| Compliant Standards | ASTM D6595 (Used Lubricants), ASTM D6728 (Fuel Oils) |
| Sample Volume | 2 mL |
| Analysis Time | ≤30 seconds per sample |
| Elements Quantified | Up to 31 elements (24 standard + 7 optional) |
| Detection Limits | Sub-ppm for most metallic elements |
| Sample Preparation | None — direct oil injection |
| Gas Requirement | None |
| Application Scope | In-service lubricant wear debris, contaminant, and additive analysis |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | SpectrOil M |
| Price | Upon Request |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | SpectrOil M |
| Detection Method | Rotating Disc Electrode Atomic Emission Spectroscopy (RDE-OES) |
| Compliance | ASTM D6595, ASTM D6728 |
| Max Elements Detected | 31 |
| Analysis Time | ≤30 s per sample |
| Power Requirement | Standard AC mains |
| Sample Prep | None required |
| Operating Environment | MIL-STD-810G compliant (shock/vibration per JOAP CID-0191) |
| Integrated Computing | Industrial-grade touchscreen PC |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Manufacturer | Spectro Scientific |
| Type | Imported |
| Model | SpectrOil M/N-W |
| Pricing | Upon Request |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | SpectrOil M/N-W |
| Application | Elemental Analysis of In-Service Lubricants, Hydraulic Fluids, and Coolants |
| Certification | Qualified under U.S. Department of Defense Joint Oil Analysis Program (JOAP) CID-0191 |
| Element Capacity | 15 or 20 elements (JOAP-compliant configurations) |
| Measurement Principle | Rotating Disc Electrode Atomic Emission Spectrometry (RDE-AES) |
| Sample Throughput | ~30 seconds per analysis |
| Power Requirement | Standard AC mains (100–240 VAC, 50/60 Hz) |
| Form Factor | Benchtop, transportable |
| Compliance | JOAP-certified consumables and calibration protocols required for data traceability |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | SpectroTrack |
| Architecture | Browser-based (B/S) |
| Compliance | Designed for ISO/IEC 17025, ASTM D6595, D7684, D7690, and FDA 21 CFR Part 11-ready workflows |
| Integration | Native support for Spectro Scientific analyzers including Spectroil Q100, LNF-Q200, SpectroVISC, and FluidScan platforms |
| Deployment | On-premise or secure cloud-hosted |
| User Access | Role-based authentication with audit trail logging |
| Data Handling | Structured metadata capture for samples, assets, instruments, clients, and test methods |
| Reporting | Automated PDF/Excel report generation with customizable templates |
| Trending | Time-series analysis of elemental concentrations, viscosity, oxidation, nitration, soot, water, and particle counts |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SpectrOil M |
| Pricing | Upon Request |
| Product Category | Laboratory Instrument |
| Analytical Capability | Multi-element Quantification (Metals, Additives, Contaminants) |
| Brand | TANAKA |
|---|---|
| Origin | Japan |
| Model | AFP-102 |
| Standards Compliance | ASTM D6371, IP 309, EN 116, JIS K2288, SH/T 0248 |
| Cooling Method | Integrated Peltier thermoelectric module (no formaldehyde or external chiller required) |
| Temperature Range | Ambient to –60 °C |
| Temperature Resolution | 0.1 °C |
| Cooling Modes | Linear ramp and stepwise (isothermal) cooling |
| Detection Principle | Dual-point optical meniscus tracking via LED-photodiode system with dedicated mechanical mounting bracket |
| Sample Compatibility | Diesel fuels, heating oils, biodiesel blends, and other middle distillates |
| Brand | Tannas&King |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Product Origin | Imported |
| Model | NOACK S2 |
| Price | Upon Request |
| Category | Laboratory Instrument |
| Test Parameter | Evaporation Loss of Lubricating Oils |
| Compliance Standard | ASTM D5800 |
| Dimensions (W×D×H) | 55 × 40 × 33 cm |
| Weight | 33.85 kg |
| Voltage | 220 V |
| Frequency | 50/60 Hz |
| Heating Method | Solid-State Metal Heater (Wood’s Metal-Free) |
| Vacuum System | Integrated Vacuum Pump with Automatic Control |
| Vacuum Level | 20 mm H₂O |
| Test Temperature | 250 °C (±0.1 °C accuracy) |
| Test Duration | 60 min |
| Safety Features | Over-Temperature Protection, Heat-Shield Enclosure |
| Certification | CE |
| Data Output | RS232 Serial Interface for Printer |
| Brand | Tannas&King |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | TanEV CDT |
| Product Type | Laboratory Instrument |
| Compliance Standards | ASTM D8544, SAE J3200 |
| Brand | Tannas&King |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | TanEV WCT |
| Product Type | Laboratory Instrument |
| Compliance | SAE J3200 (in development), ASTM method under preparation |
| Brand | Tannas & King |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | TBS 3000 |
| Product Type | Laboratory Instrument |
| Test Parameter | HTHS Viscosity |
| Compliance Standards | ASTM D4683, ASTM D6616, SAE J300, GB/T 6538 |
| Dimensions (W × D × H) | 66 × 66 × 48 cm |
| Weight | 38.5 kg |
| Power Supply | 100–240 VAC, ≤6 A, 50/60 Hz |
| Viscosity Range | 1–30 mPa·s (cP) |
| Sample Volume | 40 mL (recommended) |
| Test Duration per Sample | ~5–7 min |
| Auto-sampler Capacity | 1–40 samples per sequence |
| Temperature Control Setpoints | 80 °C, 100 °C, 150 °C (±0.1 °C) |
| Shear Rate Range | 5×10⁵ s⁻¹ to 3×10⁶ s⁻¹ (dependent on fluid viscosity and temperature) |
| Display | Digital touchscreen interface |
| Safety Features | Automatic torque motor and stator heater shutdown upon power interruption |
| Brand | Tannas & King |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | TFAB |
| Product Type | Laboratory Instrument |
| Test Parameter | Foam Characteristics |
| Compliance Standards | ASTM D892, IP 146, ISO 6247 |
| Dimensions (W×D×H) | 61 × 61 × 53 cm |
| Weight | 72.5 kg |
| Power Supply | 220 V, Single-phase, 10 A, 50/60 Hz |
| Heating Medium | Forced Air |
| Motor | DC-driven, maintenance-free |
| Aeration Head | Stainless steel cylindrical head with pre-heated air supply |
| Air Flow System | Dual integrated mass flow meters |
| Air Flow Rate | 94–200 mL/min (±5 mL/min) |
| Temperature Range | 20–175 °C (±0.1 °C) |
| Test Programs | Four standardized sequences (I: 24 °C, II: 93.5 °C, III: 24 °C, IV: 150 °C) |
| Sample Volume | 200 mL |
| Test Capacity | Six 1000-mL graduated cylinders |
| Display | Touchscreen controller with real-time digital readouts, programmable alarms, and elapsed time tracking |
| Safety | Dual thermal protection (fuse + current-limiting fuse), CE certified |
| Shipping Weight/Dimensions | ~90 kg / 71 × 71 × 122 cm |
| Brand | Tannas&King |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Product Category | Imported Laboratory Instrument |
| Model | SB+2 |
| Application Scope | Lubricating Oil & Low-Temperature Fluid Characterization |
| Compliance Standards | ASTM D5133, D7110, D2983, D4684, D445, D97, D2500 |
| Temperature Range | +30 °C to –70 °C |
| Temperature Control Accuracy | ±0.1 °C (programmed), ±0.03 °C (manual) |
| Cooling Rate | 1 °C/h (for Brookfield Scan/Gel Index), Isothermal for Brotz–Feldt Viscosity |
| Bath Medium | Methanol (temperature-dependent) |
| Dimensions (W×D×H) | 48 × 61 × 69 cm |
| Net Weight | ~86 kg |
| Power Supply | 220 VAC, 50/60 Hz |
| Safety Certifications | CE |
| Transport Weight (Bath Unit) | ~123 kg |
| Transport Dimensions (Bath Unit) | 66 × 59 × 122 cm |
| Brand | SOLGE |
|---|---|
| Origin | South Korea |
| Model | VARTECTOR |
| Application | ASTM D7843-compliant film potential analysis of phosphate ester fire-resistant hydraulic fluids (EHC systems) |
| Measurement Principle | Reflectance-based colorimetric quantification of deposited insolubles on membrane filters using CIE L*a*b* color space |
| Compliance | Fully aligned with ASTM D7843–21 “Standard Test Method for Quantifying Potential for Insoluble Formation in Phosphate Ester Fluids” |
| Automation Level | Fully automated load control, optical measurement, system verification, and diagnostic reporting |
| Data Output | ΔE, ΔL*, a*, b* values |
| Brand | Xufeng |
|---|---|
| Origin | Shanghai, China |
| Model | XF-0765 |
| Standards Compliance | SH/T 0765-2005, ASTM D6079, ISO 12156-1, CEC F-06-A-96, IP 450, EN 590 |
| Temperature Range | 20–70 °C (±2 °C control accuracy) |
| Display | Text-based LCD |
| Printer | Integrated dot-matrix printer |
| Power Consumption | 200 W |
| Dimensions (W×D×H) | 230 × 500 × 350 mm |
| Weight | ~20 kg |
| Application | Fuel and lubricant wear performance evaluation under boundary lubrication conditions |
| Brand | Xufeng |
|---|---|
| Origin | Shanghai, China |
| Model | XF-12579 |
| Standards Compliance | GB/T 12579, SH/T 0722-2002, ASTM D892, JIS K 2518-91 |
| Temperature Control Range | 10°C to 150°C |
| Temperature Accuracy | ±0.1°C (at 24°C, 93.5°C, and 150°C) |
| Air Flow Rate | 94 ±5 mL/min (adjustable via precision needle-valve float flowmeter) |
| Safety Interlocks | Low-Liquid-Level & Over-Temperature Protection |
| Power Supply | 220 V / 50 Hz |
| Dimensions (L×W×H) | 886 × 378 × 720 mm |
| Glass Cylinder Size | Φ300 × 180 × 580 mm (×2) |
| Brand | Xufeng |
|---|---|
| Origin | Shanghai, China |
| Model | XF-2266 |
| Applicable Standards | GB/T 3142, SH/T 0189, SH/T 0202, SH/T 0204, ASTM D2266, ASTM D2596, ASTM D2783 |
| Temperature Control Range | 0–150 °C (±1 °C) |
| Rotational Speed | 600–1800 rpm |
| Load Capacity | 78–8000 N (±0.1% control accuracy) |
| Test Duration | 0–99 min (0.01 s resolution) |
| Wear Scar Diameter Measurement Accuracy | ±0.02 mm (post-calibration) |
| Data Storage | 100 test records |
| Power Consumption | 1.6 kW |
| Dimensions (W×D×H) | 300×450×650 mm |
| Weight | ~75 kg |
| Brand | Xufeng |
|---|---|
| Origin | Shanghai, China |
| Model | XF-6082 |
| Standards Compliance | ASTM D6082, ASTM D892, SH/T 0722, GB/T 12579 |
| Temperature Control | 150.0 °C ±1.0 °C or 93.5 °C ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.1 °C |
| Heating Medium | Clean, dry air |
| Heating Rate | ≤30 min to 150 °C (instrument) |
| Air Flow Rates | 94 ±5 mL/min and 200 ±5 mL/min (dual calibrated float flowmeters) |
| Sample Vessels | Two 1000 mL graduated anti-foam glass tubes (height ≈ 500 mm, OD ≈ 65 mm, 900 mL mark at ≈ 310 mm) |
| Diffuser | Imported stainless steel sintered metal frit (15–60 µm pore size) |
| Viewing Window | Reinforced high-temperature borosilicate safety glass with integrated LED illumination |