Optical Instruments
Filter
Showing 1051–1080 of 1896 results
| Brand | Luchu Technology |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GY-J-Hg / GY-J-Xe |
| Light Source Type | Mercury-Argon Discharge Lamp (GY-J-Hg) & Continuous Xenon Arc Lamp (GY-J-Xe) |
| Spectral Range (GY-J-Hg) | 200–1100 nm |
| Spectral Range (GY-J-Xe) | 900–1900 nm |
| Fiber Interface | SMA905 |
| Compliance | Designed for ISO/IEC 17025-compliant wavelength calibration workflows |
| Intended Use | Primary and secondary wavelength calibration of spectrometers, monochromators, and optical spectrum analyzers |
| Brand | LUQI |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | GY-HL20 |
| Light Source Type | Tungsten-Halogen Lamp |
| Maximum Power | 20 W |
| Optical Interface | SMA905 Fiber Coupling Port |
| Spectral Stability | High (Typical Drift < ±0.5% over 1 hr at Constant Power) |
| Spectral Range | ~350–2500 nm (Continuum Emission) |
| Brand | Lytid |
|---|---|
| Origin | France |
| Model | RIGI Terahertz Camera |
| Imaging Principle | Frequency-Modulated Continuous-Wave (FMCW) Radar at 120 GHz |
| Frequency Bandwidth | 20 GHz |
| Spatial Resolution (x-y) | 1.8 mm |
| Depth Resolution | ≤300 µm (typical, dependent on material dispersion) |
| Scan Area | 300 × 300 mm² |
| Minimum Pixel Step | 0.5 mm |
| Acquisition Rate | Up to 10 Hz (per pixel) |
| Dynamic Range | >60 dB (single-shot, 100 ms integration) |
| Detector Array Format | 16 × 16 pixels (256 total) |
| Active Sensing Area | 1.5 × 1.5 mm² |
| Pixel Pitch | ~94 µm (calculated from active area and count) |
| Working Distance Options | 40–150 mm (via interchangeable f = 40 / 75 / 100 / 150 mm THz optics) |
| Z-Axis Motorized Adjustment | ±25 mm travel, 1 µm repeatability |
| Software Suite | TeraScan Easy© (acquisition control), TeraVisio3D© (3D volumetric reconstruction & visualization) |
| Compliance | CE-marked |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-M350 |
| Motion Axes | X, Y, Z |
| Travel Range | 50 μm (X), 50 μm (Y), 25 μm (Z) |
| Closed-Loop Resolution | 0.05 nm (25 μm range), 0.1 nm (50 μm range) |
| Resonant Frequency | 1 kHz (X), 700 Hz (Y & Z) |
| Stiffness | 1.0 N/μm |
| Angular Deviation (Roll/Pitch) | ≤1 μrad |
| Angular Deviation (Yaw) | ≤3 μrad |
| Max Horizontal Load | 0.5 kg |
| Max Vertical Load | 0.2 kg |
| Body Material | Aluminum/Titanium or Invar |
| Vacuum Compatibility | High Vacuum (Non-Bakeable) |
| Controller | Nano-Drive® |
| Brand | Meadowlark Optics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HoloTweezer™ |
| Pricing | Upon Request |
| Brand | Meiji |
|---|---|
| Origin | Japan |
| Model | EMZ-13TR |
| Magnification Range | 10×–70× (with 10× eyepieces) |
| Zoom Ratio | 1:7 continuous optical zoom |
| Working Distance | 90 mm |
| Compatibility | Standard C-mount interface for digital cameras and modular illumination systems |
| Brand | Mel-Build |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Dual-Tilt Probe TEM Sample Holder |
| Pricing | Available Upon Request |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | MyBrix |
| Product Type | Handheld Refractometer |
| Display | Digital |
| Measurement Range | 0–95 °Brix |
| IP Rating | IP65 |
| Temperature Compensation | Automatic (ATC) |
| Prism Design | Shallow, Easy-Clean Geometry |
| Battery Life | Up to 10,000 measurements |
| Predefined Scales | 10 built-in scales (3 simultaneously active) |
| Weight (with batteries) | 115 g |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | Densito 30PX |
| Product Type | Handheld Density Meter |
| Temperature Control | Yes |
| Digital Display | Yes |
| Measurement Range | 0 to 2 g/cm³ |
| Resolution | 0.0001 g/cm³ |
| Accuracy | ±0.001 g/cm³ |
| Temperature Range | 5–35 °C |
| Temperature Resolution | ±0.1 °C |
| Units Supported | Density, Specific Gravity (SG), Alcohol % v/v, Brix %, API Gravity, Baumé, Plato, H₂SO₄ (w/w%), and User-Defined Units |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | Easy R40/Brix/Bev |
| Instrument Type | Benchtop Refractometer |
| Temperature Control | Peltier-based, active heating & cooling |
| Display | Digital LCD |
| Refractive Index Range | 1.3200–1.5800 nD |
| Built-in Performance Verification | SimpleCheck™ certified reference standards |
| Compliance | Designed for GLP/GMP environments with audit-ready verification workflow |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Product Type | Benchtop Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Refractive Index Range | 1.30–1.72 |
| Measurement Accuracy | ±0.0001 |
| Resolution | 0.0001 |
| Brix Range | 0–100% w/w |
| Brix Accuracy | ±0.05 (at ~10–80% w/w) |
| Temperature Range | 10–65 °C |
| Temp. Accuracy | ±0.1 °C |
| Supported Units | nD, % Brix, °Oechsle, °Babo, HFCS-42/55, Invert Sugar, Custom Concentration Tables, Freeze Point Depression |
| Preloaded Methods | Up to 66 |
| Auto Sample Detection (FastStart™) | Yes (on Easy Brix & EaSy R4O) |
| Minimum Sample Volume | 0.2 mL (Easy Brix), ~50 µL (EaSy R4O), 0.2 mL (Easy Bev) |
| Dimensions (W×H×D) | 170×156×273 mm (Easy Brix), 198×382×200 mm (EaSy R4O), 170×156×273 mm (Easy Bev) |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | EasyMax 102/402 HFCal / OptiMax HFCal |
| Principle | Heat-Flow Calorimetry |
| Temperature Range | −20 to 180 °C (configurable) |
| Pressure Rating | Up to 20 bar (g) |
| Reactor Volume | 10–400 mL |
| Thermal Sensitivity | < ±0.5 W |
| Data Acquisition Rate | Up to 10 Hz |
| Compliance | ASTM E698, ISO 11358, USP <1031>, FDA 21 CFR Part 11 (with optional audit trail) |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Instrument Type | Benchtop Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Refractive Index (nD) Range | 1.3200–1.7000 |
| Brix Range | 0–100% w/w |
| nD Accuracy | ±0.0001 (near calibration point), ±0.00002–±0.00004 (full range) |
| nD Repeatability | ±0.00005 (R4), ±0.00001 (R5) |
| nD Resolution | 0.0001 (R4), 0.00001 (R5) |
| Brix Accuracy | ±0.05% (R4), ±0.014% (R5) |
| Brix Repeatability | ±0.05% (R4), ±0.01% (R5) |
| Temperature Range | 5–100 °C (R4), 5–75 °C (R5) |
| Temp. Accuracy | ±0.1 °C (5–100 °C, R4), ±0.03 °C (15–50 °C, R5), ±0.05 °C (5–75 °C, R5) |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Product Type | Benchtop Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Measurement Range | 0–100 % w/w (Brix or refractive index equivalent) |
| Accuracy | ±0.05 % w/w |
| Compliance | FDA 21 CFR Part 11 ready (with LabX software) |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | InPro 8600 |
| Measurement Range | 0–100 EBC / 0–400 FTU |
| Process Connection | Inline sanitary sleeve (Varivent®-compatible) |
| Wetted Materials | 316L stainless steel, sapphire optics |
| Operating Temperature | 0–80 °C (standard), up to 120 °C (short-term) |
| Operating Pressure | 1–16 bar |
| Optical Detection Angles | 25° and 90° scattering |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Product Type | Industrial Online Turbidimeter |
| Measurement Principle | Backscatter & Forward/90° Scatter Optical Detection |
| Sensor Types | InPro8200 (Dual-Fiber Backscatter), InPro8300RAMS (Flow-Cell Forward/90° Scatter) |
| Compliance | Designed for FDA 21 CFR Part 11, GMP/GLP environments, ASTM D6506, ISO 7027 |
| Installation Options | Reactor-mounted, Pipe-threaded (DIN/ISO/NPT), Sanitary Clamp (Tri-Clamp®), Flow Cell |
| Output Signal | 4–20 mA, HART®, Modbus RTU/TCP, EtherNet/IP™ |
| Enclosure Rating | IP66/IP68 (InPro8200), IP69K (InPro8300RAMS) |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | InPro8200 |
| Measurement Principle | Backscatter Optical Detection |
| Optical Path | Dual-Fiber Configuration |
| Measuring Range | 5–4000 FTU, 0–30 g/L (cell density) |
| Probe Length Options | 120 / 205 / 297 / 407 mm |
| Wetted Materials | ASTM A240 UNS S31603 (316L stainless steel) or UNS N10276 (Hastelloy C-276) |
| Process Connection | Pg 13.5 thread |
| Max. Operating Pressure | 16 bar (232 psi) |
| Window Material | Epoxy-sealed optical window |
| Fiber Optic Cable | Fixed 3 m dual-fiber cable with 2 FC/PC connectors |
| Probe Diameter | 12 mm |
| Compliance | Designed for GMP/GLP environments |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | InPro8400 |
| Measurement Principle | 12° forward scatter + direct transmission |
| Optical Window Material | Sapphire |
| Wetted Materials | Stainless steel (316L), sapphire, FDA-compliant polymer gasket |
| Process Connections | DIN, ANSI, APV, NPT, milk union, Tuchenhagen Varivent, Neumo BioControl, Tri-Clamp |
| Pressure Rating | 1–16 bar (14.5–232 psi) |
| Particle Detection Threshold | ≥ 0.3 µm |
| Calibration Units | FTU, EBC, ppm, g/L |
| CIP-Compatible | Yes |
| Compliance | FDA 21 CFR Part 11 ready (with appropriate software configuration), meets ISO 7027 and ASTM D6506 requirements for turbidity measurement |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | MultiMax |
| Type | Reaction Calorimeter (Heat Flow Calorimetry System) |
| Configuration | Modular Parallel Reactor Platform with Independent Temperature, Agitation & Dosing Control |
| Thermal Measurement Principle | Heat Flow Calorimetry (HFC) |
| Compliance | Designed for GLP/GMP-aligned process development environments |
| Software Integration | iC Safety & iC DataCenter (21 CFR Part 11 compliant audit trail, electronic signatures) |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | 30PX / 30GX |
| Measurement Principle | Sodium D-line (589.3 nm) critical angle method |
| Refractive Index Range | 1.32–1.50 (30PX), 1.32–1.65 (30GX) |
| Resolution | 0.0001 RIU |
| Accuracy | ±0.0005 RIU |
| Temperature Range | 10–40 °C |
| Temperature Compensation | Integrated Peltier-controlled sensor with automatic compensation (ATC) |
| Display | High-resolution LCD |
| Data Output | USB and optional Bluetooth connectivity |
| Compliance | Designed for GLP/GMP environments |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | RTCal™ |
| Temperature Ramp Rate | 8 °C/min |
| Emergency Cooling Rate | 30 °C/min |
| Temperature Control Modes | Tr (isothermal/gradient), Tj (isothermal/gradient), reflux/condensation, crystallization, adiabatic |
| Agitation Speed Range | 30–2500 rpm (repeatability ±1%) |
| Maximum Torque | 1 N·m |
| Overall Heat Transfer Coefficient (U-value) | online measurement, accuracy ±1%, repeatability 1–3% (standard experiments) |
| Brand | MicaSense |
|---|---|
| Model | Altum-PT |
| Weight | 460 g |
| Dimensions | 11.0 × 8.0 × 6.9 cm |
| Spectral Sensor Resolution | 2064 × 1544 (3.2 MP per band) |
| Panchromatic Sensor Resolution | 4112 × 3008 (12 MP) |
| Thermal Sensor | 320 × 256 FLIR Boson® |
| GSD @ 120 m | 5.28 cm (multispectral), 2.49 cm (panchromatic), 33.5 cm (thermal) |
| FOV | 50° H × 38° V (multispectral), 46° H × 35° V (panchromatic), 48° × 39° (thermal) |
| Capture Rate | ≥2 fps (raw DNG) |
| Storage | CFexpress Type B card |
| Spectral Bands | Blue (475 nm, 32 nm BW), Green (560 nm, 27 nm), Red (668 nm, 14 nm), Red Edge (717 nm, 12 nm), NIR (842 nm, 57 nm), Thermal LWIR (7.5–13.5 µm) |
| Pixel Alignment | Hardware-synchronized, co-registered output |
| Brand | Micro-Hybrid |
|---|---|
| Origin | Germany |
| Model | JSIR350-4-AL-C-D5.8-0-0 |
| Spectral Range | 2–15 µm |
| Emitter Chip Size | 2.2 × 2.2 mm |
| Rated Power | 0.65 W |
| Membrane Temperature | 610 ± 30 °C (max. 850 °C) |
| Lifetime | >100,000 h |
| Recommended Drive Mode | Constant Power |
| Package | TO-39 Metal Can |
| Max. Housing Temperature | 185 °C |
| Illumination Type | External Illumination |
| Light Source Type | Infrared Blackbody Source |
| Brand | MicroInno |
|---|---|
| Model | MIVTHD-TF/JL |
| Compatibility | Thermo Fisher, JEOL, Hitachi TEMs |
| Dual-Axis Tilt Range | α/β ±30° (typ.) |
| Tilt Resolution | < 0.1° |
| Linear Translation Resolution | < 1.5 nm/min |
| Sealing Mechanism | Retractable Viton O-ring |
| Sample Mounting | Hex-screw clamping |
| Vacuum Compatibility | ≤1×10⁻⁷ Pa |
| Gas Environment | Inert gas (Ar/N₂) or high vacuum transfer |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PM-Series |
| Price Range | USD 1,100 – 2,150 |
| Product Type | Motorized Translation Stage |
| Brand | Microphotons |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Optical Component |
| Model | QPM-PP:Mg-SLN |
| Component Type | Nonlinear Optical Element |
| Compliance | RoHS-compliant, ISO 9001-certified manufacturing environment |
| Brand | Microphotons |
|---|---|
| Origin | USA |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Imported Optical Component |
| Model | UV2528B |
| Focal Length | 25.04 mm (at λ = 266 nm) |
| Back Focal Distance | 22.07 mm |
| Aperture Range | f/2.8–f/16 |
| Image Circle Diameter | Ø12.8 mm (1″ format, 9.6 mm × 12.8 mm) |
| Coating | Single-layer MgF₂ anti-reflection coating |
| Mount | C-mount |
| Lens Construction | Multi-element fused silica design optimized for deep-UV transmission |
| Operating Wavelength Range | 200–400 nm (peak transmission ≥85% at 266 nm) |
| Maximum Sensor Compatibility | 1″ (12.8 mm diagonal) |
| Diameter × Length | 30.0 mm × 28.9 mm |
| Brand | MingHui |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Type | Upright |
| Image Analysis System | Integrated |
| Total Magnification Range | 50×–500× |
| Eyepieces | Wide-Field WF10× (Field Number Φ22 mm) |
| Objective Types | Brightfield (MHML100) / Brightfield & Darkfield (MHML100BD) |
| Illumination | 6V30W Halogen (MHML100) / 12V50W Halogen (MHML100BD) |
| Focusing Mechanism | Coaxial Coarse/Fine Focus with 1 µm Fine Adjustment Graduation |
| Stage Travel | 35 mm (X) × 30 mm (Y) |
| Objective Mount | Quintuple Nosepiece with Ball-Bearing Internal Centering |
| Eyepiece Tube | Trinocular, 30° Inclination, 100% Light Path Diversion for Imaging |
| Brand | MingHui |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | MHPL1500 |
| Illumination | Transmitted Halogen (6V/20W) |
| Objective Lenses | PL 4×/0.10, PL 10×/0.25, PL 40×/0.65 (spring), PL 60×/0.85 (spring) |
| Eyepieces | Wide-field WF10× (Φ18 mm), Divided 10× (0.10 mm/div) |
| Brand | MISCO |
|---|---|
| Origin | USA |
| Model | VIP2-3A-2.0/2.5 |
| Product Type | Inline Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Refractive Index Range | 1.3330 to 1.5000 nD₂₀ |
| Brix Range | 0–85 °Brix |
| Resolution | 0.0001 nD₂₀ (0.1 °Brix) |
| Accuracy | ±0.0001 nD₂₀ (±0.1 °Brix) |
| Optical Material | Sapphire |
| Wetted Parts | Passivated 316L Stainless Steel |
| Light Source | Precision LED @ 589.3 nm |
| IP Rating | IP68 |
| Certifications | 3-A Sanitary, CE, FCC |
| Operating Temperature | −20 to 100 °C |
| Pressure Rating | 0–20.68 bar (0–300 psi) |
| Power Supply | 5–24 VDC (3 VDC optional) |
| Dimensions | 61 mm H × 64.1 mm max Ø |
| Weight | 0.45 kg |