Optical Instruments
Filter
Showing 1621–1650 of 1868 results
| Brand | ZOLIX |
|---|---|
| Model | FP-XYZT |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Construction | Monolithic 3D Translation Base (TSMW13-XYZ) + Integrated 2D Tip-Tilt Platform (APFP-T) |
| Travel Range | Tx = Ty = Tz = 13 mm |
| Angular Range | θy = θz = ±3° |
| Wobble Error | < 30 arcseconds |
| Minimum Graduation | 0.01 mm |
| Left-Handed Variant | FP-XYZTL |
| Compliance | Designed for ISO 10110–7 optical mounting standards and compatible with standard SM1 (1.035"-40) and Ø1" optical post interfaces |
| Brand | ZOLIX |
|---|---|
| Model | Fresnel-03 |
| Measurement Channels | 3 |
| Working Distance | 0–10 m |
| Accuracy | < 1×10⁻⁷ m/m (wavelength-limited) |
| Periodic Nonlinearity | 4 nm (p-p, @ 5 cm) |
| Resolution | 0.03 nm (@ 5 cm) |
| Max Target Velocity | 3.8 m/s |
| Max Bandwidth | 5 MHz |
| Max Data Rate | 10 MHz |
| Target Reflectivity Range | 4%–100% |
| Measurement Laser | 1545 ± 15 nm (Class 1 DFB) |
| Guide Laser | 650 ± 15 nm (Class 1) |
| Output Interfaces | TCP/IP, BiSS-C, Quadrature Analog Signals |
| Environmental Options | UHV-Compatible, Cryogenic (-273 °C), High-Magnetic-Field (≥ 10 T) Probes |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer | ZOLIX Optics |
| Model | FSD100A |
| Form Factor | Integrated (Monolithic) Platform |
| Degrees of Freedom | 6-DOF Active Isolation |
| Active Bandwidth | ≥0.8 Hz |
| Vertical Transmissibility | ≤−3 dB @ 2 Hz, ≤−12 dB @ 5 Hz, ≤−25 dB @ 10 Hz |
| Horizontal Peak Thrust per Actuator | 640 N |
| Vertical Peak Thrust per Actuator | 1280 N |
| Platform Dimensions (L×W×H) | 1000 × 700 × 150 mm |
| Mass per Leg | 138 kg |
| Main Support Element | Steel Coil Spring |
| Load Capacity | 1000 kg |
| Compliance | ISO 20483 (Vibration Isolation Performance), ASTM E1776 (Laboratory Vibration Criteria), GLP-Compatible Control Architecture |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | Light Source Accessories |
| Light Source Type | Xenon Lamp |
| Illumination Mode | External (Side-Illumination) |
| Output Port Diameter | 59 mm |
| Compatible Instruments | GLORIA Series Lamps, Omni-λ Spectrometers, SR540 Chopper, SD Filter Wheels |
| Optical Interface Standard | M3/M6 Threaded Mounting |
| Compliance | Designed for ISO/IEC 17025-aligned optical laboratories, compatible with GLP/GMP-relevant experimental workflows |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Gloria-SC-P-UVE |
| Light Source Type | Supercontinuum Laser (Fiber-Based, UV-Extended) |
| Pulse Width | 450 ps |
| Repetition Rate Range | 1.5–3 MHz |
| Spectral Coverage | 380–2400 nm |
| Max. Average Output Power | 7 W |
| Polarization | Unpolarized |
| Beam Profile | Near-Gaussian, Fundamental Mode (M² ≈ 1.1 @ >430 nm) |
| Beam Diameter | ~1.5 mm @ 530 nm, ~2.5 mm @ 1100 nm |
| Power Stability (RMS) | ≤0.5% over 8 hours at full output |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GLORIA-T150A / GLORIA-T250A |
| Light Source Type | Tungsten-Halogen (Broadband) |
| Illumination Mode | External (Collimated Beam) |
| Output Beam Diameter | 46 mm |
| Vertical Adjustment Range | 137–173 mm |
| Cooling Method | Forced-air Fan Cooling |
| Reflector Configuration | Rear-mounted Ellipsoidal Reflector |
| Current Stability | ±0.05% |
| Input Voltage | 110/220 V AC ±10% |
| Lamp Life | 2000 h (T150), 2000 h (T250) |
| Color Temperature | 3200 K (T150), 3000 K (T250) |
| Luminous Flux | 3200 lm (T150), 9000 lm (T250) |
| Lamp Voltage | 24 V (T150), 24 V (T250) |
| Max. Operating Current | 6.5 A (T150), 10.8 A (T250) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | GLORIA-X150A |
| Light Source Type | Xenon Lamp |
| Illumination Mode | External (Collimated Beam) |
| Collimated Beam Diameter | 46 mm |
| Adjustable Optical Height Range | 137–173 mm |
| Spectral Range (with LSB-X150AUV lamp) | 200–2500 nm |
| Lamp Cooling | Forced-air convection via integrated fan |
| Reflector Design | Rear-mounted elliptical reflector (60% collection efficiency gain) |
| Current Stability | ≤0.5% RMS fluctuation |
| Ignition | High-voltage pulse trigger (≥25 kV) |
| Lamp Positioning | External fine-adjustment knob for filament alignment |
| Safety Compliance | CE-marked enclosure, interlocked lamp chamber, UV/IR shielding compatible |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GLORIA-X450A |
| Light Source Type | Xenon Arc Lamp |
| Spectral Range | 250–2500 nm |
| Output Stability | ≤1% (with imported lamp) |
| Lamp Housing Temperature | <500 °C (at 20% overload) |
| Anode Temperature | <180 °C |
| Collimated Beam Diameter | 46 mm |
| Optical Axis Height Adjustment Range | 157–193 mm |
| Reflective Collector Efficiency Gain | >60% (vs. standard parabolic design) |
| Safety Features | Interlocked lid cutoff, thermal shutdown (>safe threshold), ignition timeout (10 s) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | GLORIA-X500A |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Spectral Range | 250–2500 nm |
| Output Beam Diameter | 46 mm |
| Optical Axis Height Adjustment Range | 157–193 mm |
| Light Collection Efficiency Gain | >60% (vs. standard parabolic reflector) |
| Intensity Stability | ≤2% (with imported lamp bulb, under constant-current power supply) |
| Max. Envelope Temperature (Bulb Wall) | <500 °C at 600 W equivalent load |
| Max. Anode Temperature | <180 °C |
| Lamp Replacement & Realignment Time | ≤5 minutes |
| Safety Features | Interlocked lid cutoff, thermal shutdown, ignition timeout protection (10 s) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Goniometer25-phi |
| Product Type | Motorized Translation & Tilting Stage |
| Dimensions | 25 × 25 × 12.5 mm |
| Mass | 20 g |
| Operating Temperature Range | 1.4–400 K (optional down to 30 mK) |
| Vacuum Compatibility | Up to 2 × 10⁻¹¹ mbar (UHV version) |
| Magnetic Field Tolerance | Up to 18 T |
| Construction Materials | Pure Titanium (Ti) body, Beryllium Copper (BeCu) flexures and electrodes |
| Actuation Voltage | ≤ 200 V |
| Angular Range | ±3° (6° total) |
| Maximum Load | 200 g |
| Tip Radius (Pivot Radius) | 53.5 mm |
| Position Sensor | Resistive feedback element |
| Sensor Resolution | 0.2 m° (0.0002°) |
| Max. Speed at 300 K | ~1 °/s |
| Drive Pins | 2, Sensor Pins: 3 |
| Cable | Phosphor Bronze twisted pair, 20 cm |
| Connector Housing | PEEK + glass fiber or BeCu, depending on version |
| Optional Configurations | HV (High Voltage), ULT (Ultra-Low Temperature), UHV (Ultra-High Vacuum) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Goniometer25-theta |
| Product Type | Motorized Tilt Stage |
| Dimensions | 25 × 25 × 12.5 mm |
| Weight | 20 g |
| Operating Temperature Range | 1.4–400 K (optional down to 30 mK) |
| Vacuum Compatibility | Up to 2×10⁻¹¹ mbar (UHV version) |
| Magnetic Field Compatibility | Up to 18 T |
| Material | Titanium (Ti) body with Beryllium Copper (BeCu) components |
| Max Load | 200 g |
| Tilt Radius | 41 mm |
| Angular Range | ±3.3° (6.6° total) |
| Sensor Resolution | 0.2 m° (0.0002°) |
| Max Speed at 300 K | 1 °/s |
| Drive Voltage | ≤200 V |
| Max Thrust Force | 2.2 N |
| Cable | Phosphor Bronze twisted pair, 20 cm |
| Connector Pins | Drive – 2 pins |
| Insulator Materials | Glass-fiber-filled Polyetheretherketone (PEEK), BeCu |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Goniometer35-theta |
| Product Type | Motorized Tilting Stage |
| Design | Compact 35×35×16 mm |
| Vacuum Compatibility | 2×10⁻¹¹ mbar |
| Temperature Range | 1.4 K – 400 K (optional down to 30 mK) |
| Magnetic Field Tolerance | Up to 18 T |
| Construction Materials | Pure Titanium & Beryllium Copper |
| Load Capacity | 500 g |
| Tilt Radius | 50 mm |
| Angular Range | ±6° (12° total) |
| Closed-Loop Resolution | 0.5 m° |
| Drive Voltage | ≤200 V |
| Max. Speed at 300 K | 1 °/s |
| Max. Thrust | 3 N |
| Sensor Type | Resistive Position Sensor |
| Cable | Phosphor Bronze Twisted Pair, 20 cm |
| Connector Pins | Drive – 2 pins, Sensor – 3 pins |
| Insulation Material | Glass-Filled Polyetheretherketone (PEEK) & BeCu |
| Brand | ZOLIX |
|---|---|
| Model | HC-100 Series |
| Axis Count | 1 |
| Motor Type Support | Bipolar 2-phase (HC-100) / 3-phase (HC3P-100) |
| Max Output Pulse Frequency | 5 kHz |
| Power Input | AC 220 V → DC 24 V via external adapter |
| Operating Modes | Continuous motion & single-step mode |
| Drive Current Range | 0.5–3.5 A (HC-100) / 0.5–5.8 A (HC3P-100) |
| Microstepping Resolution | up to 128× (HC-100) / up to 51200 pulses per revolution (HC3P-100) |
| Physical Interface | Front-panel rotary knob, direction toggle switch, mode selector |
| Power Supply | External DC 24 V adapter (included) |
| Dimensions | Compact handheld form factor (approx. 120 × 80 × 45 mm) |
| Standalone Operation | Yes — no PC connection required or supported |
| Brand | ZOLIX |
|---|---|
| Model | HMJ Series |
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Optical Filter Technology | Interference Coating / Colored Glass Substrate |
| OD Rating | 4 (per specified wavelength) |
| Visible Light Transmission (VLT) | 45–85% (model-dependent) |
| Compliance | Meets ANSI Z136.1-2022 & EN 207:2017 requirements for laser eye protection |
| Brand | ZOLIX |
|---|---|
| Model | HXP Series |
| Type | 6-Axis Parallel Kinematic Robot (PKM) |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (Beijing Zolix Instruments Co., Ltd.) |
| Category | Optical Instrument Component / Precision Motion Platform |
| Structural Architecture | Hexapod with Dual-Universal-Joint Mounting & Six Linear Actuators |
| Drive System | Stepper-Servo Hybrid Motors with EtherCAT Bus |
| Position Retention | Power-loss position hold (no homing required on reboot) |
| Max. Horizontal Load | 10 kg |
| Max. Omnidirectional Load | 2.5 kg |
| Travel Range (X/Y) | ±34 mm |
| Travel Range (Z) | ±15 mm |
| Angular Range (θx/θy) | ±11° |
| Angular Range (θz) | ±25° |
| Linear Resolution | 0.25 µm |
| Min. Linear Displacement (X/Y) | 1 µm |
| Min. Linear Displacement (Z) | 0.5 µm |
| Min. Angular Displacement (θx/θy/θz) | 12 µrad |
| Bidirectional Repeatability (X/Y) | ±3 µm |
| Bidirectional Repeatability (Z) | ±1 µm |
| Bidirectional Repeatability (θx/θy) | ±20 µrad |
| Bidirectional Repeatability (θz) | ±25 µrad |
| Unidirectional Repeatability (X/Y) | ±0.5 µm |
| Unidirectional Repeatability (Z) | ±0.3 µm |
| Unidirectional Repeatability (θx/θy) | ±2 µrad |
| Unidirectional Repeatability (θz) | ±2.5 µrad |
| Max. Linear Speed (X/Y/Z) | 80 mm/s |
| Max. Angular Speed (θx/θy/θz) | 800 mrad/s |
| Rated Linear Speed | 50 mm/s |
| Rated Angular Speed | 500 mrad/s |
| Operating Temperature | +10 °C to +40 °C (Mechanism), 0 °C to +55 °C (Controller) |
| Construction Materials | Stainless Steel & Aerospace-Grade Aluminum Alloy |
| Mass | 12 kg |
| Cable Length | 2 m |
| Controller | TMC-LAN-HXP |
| Controller CPU | Intel x86, 2.0 GHz, 4-Core |
| RAM | 2 GB DDR3 |
| Flash Storage | 16 GB DOM |
| Non-Volatile Memory | 1 Mbit FRAM |
| OS | Windows CE |
| I/O Interfaces | 16× DI, 16× DO, 4× AI (programmable range), 4× AO (programmable range), 1× EtherCAT (RJ45), 1× Standard Ethernet (RJ45), 1× USB Host, 1× HDMI |
| Software Features | Multi-coordinate system management (World, Workpiece ×64, Mounting, Actuator, Tool ×64), Euler-angle transformation support, payload simulation, 3D pose simulation, teach-in programming, full-space calibration, SDK for C/C++/.NET integration |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Imaging Sensor | 6 MP CCD (2750 × 2200), 4.54 µm pixel pitch |
| Spectral Range | 200–900 nm |
| Optical Gate Width | <3 ns (Ultra-Fast Mode) |
| Delay & Gate Timing Resolution | 10 ps |
| Cathode Gating Sync Frequency | Up to 300 kHz |
| Spatial Resolution | >30 lp/mm (fiber-optic coupling), >50 lp/mm (lens coupling) |
| Cooling | Thermoelectrically cooled to 35 °C below ambient |
| Bit Depth | 16-bit |
| Read Noise | 5 e⁻ |
| Dark Current | 0.02 e⁻/pixel/s @ –10 °C |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Origin | Domestic (China) |
| Model | IIM-A125 / IIM-A225 / IIM-B125 / IIM-B225 / IIM-C125 / IIM-C225 |
| Pricing | Upon Request |
| Cathode Diameter | 25 mm |
| Photocathode Options | S20, Solar-Blind, Bialkali, LNS20, S25 |
| MCP Configuration | Single-Stage (MCP125) or Dual-Stage (MCP225) |
| Phosphor Screen | P20 (high-brightness) or P46 (ultra-fast decay <300 ns) |
| Spatial Resolution | ≥35 lp/mm (MCP125), ≥20 lp/mm (MCP225) |
| Radiant Gain @500 nm | ≥10⁴ W/W (MCP125/P20), ≥2.5×10⁵ W/W (MCP225/P46) |
| Gating Width | Fast mode ≤3 ns, Slow mode ≥50 ns |
| Internal Trigger Frequency Range | 0.01 Hz – 100 kHz |
| External Trigger Frequency Range | 0.01 Hz – 300 kHz |
| Trigger Edge | Selectable rising/falling |
| Relay Lens | 50 mm f/1.0, 1:1 or 2:1 magnification, low-distortion, high-NA design |
| Input/Output Interface | Nikon F-mount (C-mount optional) |
| Control Interface | Integrated touchscreen (IIM-A/B), remote control box (IIM-B), manual knobs (IIM-C) |
| USB 2.0 Remote Desktop Control | Supported (IIM-A/B only) |
| Mechanical Shutter | Integrated, electrically actuated |
| Filter Slot | 25 mm diameter, slide-in type |
| Anode Current Monitoring | Optional real-time readout |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Regional Classification | Domestic (China) |
| Model Range | JSL394-25 to JSL750-25, JSL589-50, JSL620-50, JSL670-50, JSL680-25, etc. |
| Optical Coating | Hard Dielectric Multilayer Interference Stack |
| Substrate Material | UV-Fused Silica or BK7 (application-dependent) |
| Diameter Options | 12.5 mm, 25 mm, 50 mm (standard) |
| Center Wavelength Range | 193 nm – 1550 nm |
| FWHM Tolerance | ±2–5 nm (depending on specification) |
| Peak Transmission | ≥30% (typical), up to ≥90% for high-efficiency variants |
| Blocking OD | ≥6 (200–1200 nm, typical), extended blocking available |
| Surface Quality | 40–20 scratch-dig |
| Parallelism | <3 arcsec |
| Wavefront Distortion | λ/4 @ 633 nm |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | KSA |
| Pricing | Upon Request |
| Travel Range | 50–400 mm |
| Lead Screw Pitch | 4–5 mm |
| Closed-Loop Resolution | 1 µm |
| Open-Loop Resolution | 2.5–3.125 µm |
| Max Speed | 40–50 mm/s |
| Repeatability | <3 µm |
| Backlash | <5 µm |
| Wobble | <15″–<30″ |
| Pitch/Yaw | <15″–<40″ |
| Straightness | 10–20 µm |
| Parallelism | 10–20 µm |
| Stepper Motor | 42/57 mm NEMA size, 1.8° step angle |
| Holding Current | 1.7–2.4 A |
| Central Load Capacity | 30–50 kg |
| Standard Encoder | Imported Linear Optical Encoder |
| Controller Compatibility | MC600 Series Motion Controller |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Product Origin | Domestic (China) |
| Models | KSA, PSA, TSA, RAK, RSA |
| Price Range | USD 0.14–285.70 |
| Product Type | Motorized Translation Stage |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | KSAG Series |
| Pricing | Upon Request |
| Base Material | Aluminum Alloy |
| Drive Mechanism | Precision-Graded Worm Gear & Worm |
| Guide System | Imported High-Grade Arc-Shaped Crossed Roller Bearing Rail |
| Rotation Center Positional Accuracy | < 0.02 mm |
| Repeatability | < 0.005° |
| Standard Motor Interface | DB9 |
| Standard Actuator | Bipolar Stepper Motor |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | KSAxxx-13 Series |
| Quotation | Available upon Request |
| Travel Range | 50–400 mm |
| Lead Screw Pitch | 4–5 mm |
| Closed-Loop Resolution | 1 µm |
| Open-Loop Resolution | 2.5–3.125 µm |
| Max. Speed | 40–50 mm/s |
| Repeatability | <3 µm |
| Backlash | <5 µm |
| Wobble | <15–30 arcsec |
| Pitch/Yaw | <15–40 arcsec |
| Straightness | 10–20 µm |
| Stepper Motor | 42/57 mm NEMA size, 1.8° step angle |
| Holding Current | 1.7–2.4 A |
| Standard Encoder | Imported 1 µm-resolution optical linear encoder |
| Optional Encoders | Higher-resolution variants available |
| Drive Mechanism | Precision ground ball screw |
| Guidance System | Ultra-precision linear rail |
| Structural Design | U-shaped rigid baseplate |
| Sealing | Elastic compression gasket for dynamic environmental protection |
| Safety Features | Dual end-limit switches + home position switch |
| Control Compatibility | Fully compatible with ZOLIX MC600 motion controller for closed-loop operation |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | KSM25(A)-65 Series |
| Quotation | Upon Request |
| Sensitivity | 2 µm |
| Travel Range | 25 mm |
| Platform Dimensions | 65 mm × 65 mm |
| Guide Mechanism | Crossed Roller Bearings |
| Drive Mechanism | Micrometer-Driven (Fine-Pitch Thread) |
| Drive Position Options | Central, Right-Side, Left-Side, Vertical-Mount Configurations |
| Load Capacity | Up to 7 kg (varies by configuration) |
| Construction Material | Anodized Black Aluminum Alloy |
| Brand | ZOLIX |
|---|---|
| Model | KSMT Series |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Drive Options | Micrometer Knob (Central/Left/Right), Precision Threaded Rod (Central/Left/Right) |
| Travel Range | ±12.5 mm |
| Platform Dimensions | 65 mm × 65 mm |
| Total Thickness | 23 mm |
| Motion Parallelism | <10 µm |
| Pitch | <30 arcseconds |
| Yaw | <20 arcseconds |
| Maximum Load Capacity | 5 kg |
| Guidance System | Imported Crossed-Roller Bearings |
| Base & Platform | Precision Ground Stainless Steel |
| Preload Mechanism | Dual-Spring Anti-Backlash Compensation |
| Compliance | Designed for ISO 9001-certified manufacturing and compatible with GLP-aligned optical alignment workflows |
| Brand | ZOLIX |
|---|---|
| Model | KSMTW Series |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (OEM Producer) |
| Construction | Monolithic Integrated Design |
| Motion Axes | X-Y Orthogonal Planar Configuration |
| Drive Options | Micrometer-Driven (KSMTW-213-232) or Threaded-Screw Driven (KSMTW-213-231) |
| Material | Stainless Steel |
| Bearing System | Imported Precision Crossed-Roller Linear Guides |
| Travel Range (X/Y) | ±6.5 mm |
| Platform Dimensions | 40 mm × 40 mm |
| Total Stack Height | 34 mm |
| Motion Parallelism Error | <30 µm |
| Repeatability | Engineered for sub-micron positional stability under static load |
| Backlash Compensation | Dual-spring preloaded anti-backlash mechanism |
| Handedness | Available in Right-Hand (standard) and Left-Hand (designated by suffix “L”) configurations |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer | ZOLIX Optics |
| Product Type | Motorized Translation Stage |
| Model | LAK20-60 |
| Travel | 20 mm |
| Top Plate Dimensions | 60 × 60 mm |
| Drive Mechanism | Imported C3-grade ball screw (Φ6 × 1 pitch) |
| Guide System | Linear motion slider rail |
| Body Material | Anodized black aluminum alloy |
| Weight | 0.58 kg |
| Resolution (full/half step) | 2 / 1 µm |
| Microstepping resolution (200x) | 0.1 µm |
| Max Speed | 20 mm/s |
| Unidirectional Positioning Accuracy | ≤20 µm |
| Repeatability | ≤±1 µm |
| Backlash | ≤1 µm |
| Static Parallelism | ≤0.05 mm |
| Straightness | ≤10 µm |
| Pitch/Yaw | ≤30″ / ≤25″ |
| Allowable Moment Load (roll/pitch/yaw) | 9.31 / 9.8 / 9.31 N·m |
| Torque Rigidity (pitch/yaw) | ≤6 µm per 90 N·cm |
| Motor | Five-phase hybrid stepper, 0.72° step angle, Oriental Motor PKP523N12B-L, holding torque 52.5 mN·m, rated current 1.2 A |
| Limit & Home Sensors | OMRON EE-SX4320 (2 limit + 1 home), NPN open-collector output, DC5–24 V ±10%, max load 8 mA |
| Load Capacity | Horizontal 8 kg / Vertical 3 kg / Inverted 4 kg |
| Connector | 10-pin industrial header |
| Cable | 0.2 m motion-rated cable |
| Key | Brand: ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Origin Category | Domestic (China) |
| Model Range | OGW11, OGW12, OGW21, OGW22, OMD Series |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | LB-700 |
| Dimensions (W×D×H) | 1500 × 700 × 1500 mm |
| Luminous Intensity Range | 100–50,000 mcd |
| Photometric Accuracy (Luminous Intensity) | < ±5% |
| Repeatability (Luminous Intensity) | < ±3% |
| CIE x,y Chromaticity Accuracy (CIE 127-B) | < ±0.004 |
| CIE x,y Repeatability | < ±0.003 |
| Spectrometer | Chameleon Series, 380–780 nm, Optical Resolution: 1 nm, A/D: 16-bit |
| XY Translation Stage | 2-axis, X: 600 mm, Y: 145 mm, Positioning Accuracy: ±0.02 mm |
| Power Supply | 0–250 V, 0–1 A |
| Voltage Accuracy | 0.05% + 2 LSB |
| Current Accuracy | 0.15% + 5 LSB |
| Data Export Format | Excel |
| Brand | ZOLIX |
|---|---|
| Model | LBE Series |
| Optical Design | Galilean (2-element) |
| Wavelength Options | 532 nm, 632.8 nm, 1064 nm |
| Expansion Ratios | 2.5× to 10× |
| Max Input Aperture | 10 mm |
| Max Output Aperture | 40 mm |
| Transmission | >92%–>95% |
| Housing Material | Anodized Aluminum |
| Mounting Thread | M22×0.75 or M34×1 |
| Length | 80–188.5 mm |
| Diameter | 26–48 mm |
| Compliance | ISO 10110 optical surface specifications, RoHS-compliant coatings |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic |
| Model | LBIC |
| Price Range | USD 14,000 – 28,000 |
| Excitation Source | Multiple stabilized continuous-wave lasers (e.g., 405 nm, 532 nm, 635 nm, 785 nm) |
| Laser Power Range | 0–30 mW, continuously adjustable |
| Focused Spot Size | < 50 µm |
| Power Stability | < 1% RMS over 8 hours |
| Measurement Repeatability | < 2% (RSD) |
| Microscopy | Interchangeable 10× and 20× objective lenses |
| Monitoring Camera | 1.3 MP industrial CMOS camera |
| Maximum Sample Area | 100 mm × 100 mm |
| XY Stage Resolution | 0.625 µm (closed-loop stepper motor) |
| Operating Temperature | 10–35 °C |
| Calibration Standard | NIM-traceable Si or InGaAs photodetectors |
| Compliance | ISO/IEC 17025-aligned calibration procedures, compatible with GLP documentation workflows |