Optical Instruments
Filter
Showing 1711–1740 of 1831 results
| Brand | ZOLIX |
|---|---|
| Model | OTBB Series |
| Material | Ferromagnetic stainless steel top layer, carbon steel bottom layer, honeycomb (grid or cylindrical) aluminum or steel core |
| Thickness | 50 mm (standard), 100 mm (custom) |
| Surface flatness | 0.1 mm per 600 mm × 600 mm |
| Mounting hole pattern | 25 mm × 25 mm square grid |
| Thread specification | M6 tapped holes |
| Weight | ~11.5 kg for 300 mm × 300 mm variant |
| Surface finish | Matte (low-reflectivity) ground finish |
| Structural design | Three-layer sandwich architecture with precision-ground top plate |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | Domestic (China) |
| Model | OTNS Series |
| Component Category | Accessory Stand |
| Construction Material | Rectangular Hollow Structural Steel |
| Surface Finish | Matte Coating |
| Fabrication Method | Full Welded Monocoque Structure |
| Adjustability | Continuously Height-Adjustable |
| Mobility | Equipped with Locking Casters and Adjustable Levelling Feet |
| Compliance | Designed for Integration with ISO 10816-1 Compliant Optical Tables |
| Brand | ZOLIX |
|---|---|
| Model | OTR Series |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (Producer) |
| Table Thickness Options | 100 mm / 200 mm / 300 mm |
| Surface Flatness | 0.02–0.05 mm per 600 mm × 600 mm |
| Mounting Hole Pattern | M6 threaded holes on 25 mm × 25 mm grid |
| Inherent Frequency Range | <5–8 Hz |
| Table Structure | Three-layer sandwich (top: 4–6 mm ferromagnetic stainless steel |
| core | steel honeycomb grid |
| bottom | 4–6 mm carbon steel with black powder coating) |
| Side Panels | Inner carbon steel + outer black aluminum-plastic laminate |
| Base Frame | Fully welded, 4- or 6-point support with height-adjustable mechanism (±20 mm range) and casters |
| Total Height | 800 mm (adjustable) |
| Mass Loading Capacity | ~120 kg/m² (100 mm), ~140 kg/m² (200 mm), ~167 kg/m² (300 mm) |
| Damping System | High-performance precision damped isolators (upper) + standard damped pads (lower) |
| Brand | ZOLIX |
|---|---|
| Model | OTSB |
| Material | Anodized Aluminum (Black Oxide Finish) |
| Thickness | 13 mm |
| Surface Flatness | ≤ 0.3 mm per 600 mm |
| Hole Pattern | 25 mm × 25 mm (M6 Tapped Holes) |
| Weight | ~3 kg (300 mm × 300 mm variant) |
| Custom Options | Metric/Imperial Hole Spacing (25.4 mm), Increased Thickness (19 mm), 1/4″-20 Threaded Holes |
| Origin | Beijing, China |
| Manufacturer | ZOLIX Optics |
| Brand | ZOLIX |
|---|---|
| Model | OTSB Series |
| Material | Anodized Black Aluminum Alloy |
| Thickness | 13 mm |
| Surface Flatness | 0.3 mm per 600 mm × 600 mm |
| Hole Pattern | 25 mm × 25 mm (M6 threaded) |
| Weight | ~3 kg (for 300 mm × 300 mm variant) |
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Producer |
| Compliance | Designed for ISO/IEC 17025-compliant optical alignment environments |
| Optional Configurations | Metric (M6), Imperial (1/4"-20), Custom Pitch (25.4 mm), and Increased Thickness (19 mm) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | Domestic (China) |
| Model | OTSS-15 / OTSS-18 / OTSS-20 / OTSS-24 / OTSS-30 |
| Length Options | 1500 mm / 1800 mm / 2000 mm / 2400 mm / 3000 mm |
| Mounting Interface | Standard T-slot with M6 threaded holes (pitch: 25 mm) |
| Structural Design | Modular, tool-free reconfigurable assembly |
| Compliance | Engineered to meet ISO 14738 (Safety requirements for optical tables and supporting structures) and GB/T 23131–2008 (Mechanical properties of laboratory equipment frames) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Optical Component |
| Model | PBS12 / PBS25 Series |
| Dimensions | 12.7 mm × 12.7 mm × 12.7 mm (PBS12) |
| Material | UV-Fused Silica |
| Coating | Broadband AR (Rₐᵥg < 0.5%) or Laser-Line V-Coating (Rₐᵥg < 0.25% @ design wavelength) |
| Polarization Extinction Ratio | Tp:Ts > 3000:1 (laser-line variants), > 2000:1 (high-power variants) |
| Surface Flatness | λ/4 @ 633 nm |
| Wavefront Distortion (transmission) | λ/4 @ 633 nm |
| Surface Quality | 40/20 scratch-dig |
| Clear Aperture | ≥80% |
| Deviation Angle | Transmission: 0° ± 5 arcmin |
| Reflection | 90° ± 5 arcmin |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Line | PHK Series |
| Price Range | USD 700 – 1,400 (FOB) |
| Compatibility | Standard M4 & M6 threaded components |
| Packaging | Rugged carry-case with labeled compartments |
| Configurations | PHK12-20 (for Ø12 mm posts) and PHK25-16 (for Ø25 mm posts) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Origin | Domestic (China) |
| Models | Comprehensive Range of Standard & Custom Sizes |
| Pricing | Available Upon Request |
| Material Options | BK7 (K9) Optical Glass, UV Fused Silica |
| Design Wavelength | 587.6 nm |
| Diameter Tolerance | +0.0 / −0.1 mm (Plano-Concave), +0.0 / −0.2 mm (Cylindrical) |
| Center Thickness Tolerance | ±0.2 mm |
| EFL Tolerance | ±2% |
| Edge Finishing | 0.2 mm × 45° chamfer |
| Coating | Uncoated (AR coating available on request) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Optical Component |
| Model | PPB Series |
| Price Range | USD 70 – 140 (per unit) |
| Compliance | ISO 10110-7 Compliant Surface Quality |
| Coating | Protected Aluminum (Internal Reflection) |
| Transmission Efficiency | ~77% (Two Internal Reflections) |
| Deviation Tolerance | ≤3 arcsec (90° Output Stability vs. Input Angle Variation) |
| Brand | ZOLIX |
|---|---|
| Model | PSA |
| Type | Precision Stepper-Driven Linear Translation Stage |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (OEM/ODM Capable) |
| Drive Mechanism | Ground Ball Screw with Preloaded Linear Guide Rails |
| Standard Interface | RS232 Serial Communication |
| Compatible Controllers | SC300, MC-Series |
| Travel Range | 50–400 mm (model-dependent) |
| Lead Screw Pitch | 4 mm (PSA050–PSA200), 5 mm (PSA300–PSA400) |
| Microstepping Resolution | 2.5–3.125 µm (at 8× subdivision) |
| Max. Speed | 40–50 mm/s |
| Repeatability | <3 µm |
| Backlash | <5 µm |
| Straightness | <10 µm / 100 mm |
| Parallelism | <15 µm / 100 mm |
| End & Home Switches | Integrated Limit and Zero-Position Optical Sensors |
| Manual Override | Rear-Mounted Precision Knob |
| Mounting | Standard ISO/Metric T-Slot and Counterbored Hole Pattern (M4/M6) |
| Compliance | CE-marked per EN 61000-6-2/-6-4 |
| Brand | ZOLIX |
|---|---|
| Model | PSAG15-250 / PSAG15-370 |
| Angular Range | ±15° |
| Top Plate Dimensions | 280 × 250 mm / 340 × 250 mm |
| Center Height | 250 mm / 370 mm |
| Guide Type | Curved Arc Rail |
| Gear Ratio | 610:1 / 870:1 |
| Resolution (8-Microstep) | 0.00018° / 0.00013° |
| Stepper Motor | 1.8° step angle, 2.4 A rated current |
| Central Load Capacity | ≥50 kg |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (OEM & ODM capable) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | PSAG15-250 / PSAG15-370 |
| Angular Range | ±15° |
| Top Plate Dimensions | 280 × 250 mm / 340 × 250 mm |
| Axis Height | 250 mm / 370 mm |
| Guide Rail | Curved Crossed-Roller Rail |
| Gear Ratio | 610:1 / 870:1 |
| Resolution (8-Microstep) | 0.00018° / 0.00013° |
| Stepper Motor | 57 mm (1.8° Step Angle) |
| Rated Current | 2.4 A |
| Central Load Capacity | ≥50 kg |
| Center Position Deviation Under Load | ≤100 µm |
| Brand | ZOLIX |
|---|---|
| Model | PSAV030-ZF / PSAV100-ZF |
| Travel | 30 mm / 100 mm |
| Top Plate Dimensions | 238 × 238 mm (customizable) |
| Gear Reduction Ratio | 21:2 |
| No-Load Max Speed | 5 mm/s |
| Stepper Motor | 57 mm frame, 1.8° step angle |
| Rated Current | 2.4 A |
| Integrated Limit Switches | Yes |
| Central Load Capacity | ≥80 kg (dependent on motor torque) |
| Maximum Static Load Capacity | >300 kg |
| Drive Option | Motorized (manual override optional) |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (OEM/ODM capable) |
| Brand | ZOLIX |
|---|---|
| Model | PSAV030-ZF / PSAV100-ZF |
| Load Capacity (Center) | ≥80 kg (up to 300 kg with optional motor configuration) |
| Travel | 30 mm / 100 mm |
| Platform Size | 238 × 238 mm (customizable) |
| Drive | Stepper Motor (1.8° step angle, 57 N·cm holding torque) |
| Max. No-Load Speed | 5 mm/s |
| Gear Reduction Ratio | 21:2 |
| Limit Switches | Integrated |
| Operating Current | 2.4 A |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (OEM & ODM capable) |
| Brand | ZOLIX |
|---|---|
| Model | PSAV30-ZF / PSAV100-ZF |
| Travel | 30 mm / 100 mm |
| Platform Size | 238 × 238 mm (customizable) |
| Max. Load Capacity | 300 kg (with high-torque motor option) |
| Drive Mechanism | Self-locking trapezoidal screw + precision worm-gear reduction (21:2 ratio) |
| Guidance | Four linear ball-bearing rails |
| Max. No-load Speed | 5 mm/s |
| Stepper Motor | 57 mm frame, 1.8° step angle, 2.4 A rated current |
| Limit Switches | 2 mechanical end-of-travel switches |
| Manual Adjustment | Integrated rear-mounted handwheel |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Interface | Standard DB9 connector |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | PSAxxx-11-X Series |
| Pricing | Upon Request |
| Material | Anodized Aerospace-Grade Aluminum Alloy |
| Linear Accuracy | <10 µm/100 mm (Straightness), <15 µm/100 mm (Flatness) |
| Lead Screw | Ground Ball Screw |
| Guide Rail | Imported Linear Motion Carriage with Precision Ground Rails |
| Motor | Standard 42 or 57 Stepper Motor (1.8° Step Angle) |
| Interface | DB9 Male Connector |
| Limit Switches | 2 Mechanical End Stops + 1 Optical Home Sensor |
| Manual Override | Rear-Mounted Micrometer Handwheel |
| Repeatability | <3 µm |
| Backlash | <5 µm |
| Max. Speed | 40–50 mm/s |
| Load Capacity | 50–70 kg (Centered) |
| Resolution (8-Subdivision) | 2.5–3.125 µm |
| Lead | 4–5 mm |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model Series | PSAxxx-11-Z |
| Pricing | Available Upon Request |
| Standard Motor | Stepper Motor |
| Communication Interface | RS232 |
| Compatible Controllers | SC300, MC-Series |
| Drive Mechanism | Ground Ball Screw |
| Guiding System | Linear Rail |
| Coupling | Elastic Shaft Coupler |
| Limit Switches | Left/Right End-of-Travel & Home Position |
| Mounting Pattern | Standard ISO/Metric T-Slot & Through-Hole Array |
| Orthogonal Integration | Dedicated Right-Angle Bracket for <90° Alignment Tolerance ≤ 15 arcsec |
| Power-Fail Safety | Integrated Hold-Brake Circuit |
| Max Load Capacity | 5–10 kg (model-dependent) |
| Max Speed | 40–50 mm/s (model-dependent) |
| Compliance | Designed for ISO 9001-aligned production |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | PSM13(A)-34 Series |
| Travel Range | 13 mm |
| Minimum Increment (Sensitivity) | 0.003 mm |
| Top Plate Dimensions | 34 mm × 34 mm |
| Guide Mechanism | Linear Ball Bearing Rail |
| Drive Mechanism | Micrometer Screw (Threaded Actuator) |
| Drive Position Variants | Center-Driven (C), Vertical-Mount Capable (CZ), Right-Side Driven (SR), Left-Side Driven (SL) |
| Load Capacity | 5 kg (C, SR, SL), 1.5 kg (CZ) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | PSM25(A)-45 Series |
| Travel Range | 25 mm |
| Sensitivity | 0.003 mm |
| Top Plate Dimensions | 45 mm × 45 mm |
| Guide Mechanism | Linear Ball Bearing Rail |
| Drive Mechanism | Micrometer Screw (Thimble-Driven) |
| Drive Position Options | Center-Driven (C), Vertical-Mount Capable (CZ), Right-Side Driven (SR), Left-Side Driven (SL) |
| Load Capacity | 5 kg (C, SR, SL), 1.5 kg (CZ) |
| Compliance | ISO 9001 Manufacturing Environment |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | PSM25(A)-65 Series |
| Travel Range | 25 mm |
| Sensitivity | 0.003 mm |
| Platform Dimensions | 65 × 65 mm |
| Guide Mechanism | Linear Ball Bearing Rail |
| Drive Mechanism | Micrometer-Driven Threaded Actuator |
| Drive Position Options | Center-Driven (PSM25(A)-65C), Vertical-Mount (PSM25(A)-65CZ), Right-Side Driven (PSM25(A)-65SR), Left-Side Driven (PSM25(A)-65SL) |
| Load Capacity | 7 kg (C/CZ/SL variants), 2.5 kg (CZ variant for vertical orientation) |
| Construction | Aluminum Alloy Body with Hard-Anodized Surface Finish |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | PSMR Series |
| Pricing | Available Upon Request |
| Brand | ZOLIX |
|---|---|
| Model | PSMV Series |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Drive Mechanism | Ultra-Fine-Pitch Threaded Actuator |
| Guidance System | Linear Ball Bearing Rails |
| Structural Principle | Cam-Actuated Vertical Translation |
| Base Material | Anodized Aluminum Alloy |
| Load Capacity | 3 kg (PSMV4-45C), 5 kg (PSMV8-65C) |
| Travel Range | 4 mm (PSMV4-45C), 8 mm (PSMV8-65C) |
| Positioning Sensitivity | 0.003 mm |
| Top Plate Dimensions | 45 × 45 mm, 65 × 65 mm |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Interchangeability | Compatible with ZOLIX PSM Series Horizontal and Rotational Stages |
| Brand | ZOLIX |
|---|---|
| Model | PSMX13 Series |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (Original Equipment Manufacturer) |
| Drive Mechanism | M7×0.25 Threaded Spindle or Micrometer Head |
| Travel Range | ±6.5 mm |
| Minimum Graduation | 0.01 mm (micrometer models only) |
| Sensitivity | 0.001 mm |
| Platform Dimensions | 34 mm × 34 mm |
| Load Capacity | 5.0 kg (L1/1/C1/C2 variants), 1.5 kg (L1A/1A/C1A/C2A variants) |
| Guide System | Precision Ground Steel Rods with Linear Ball Bearings |
| Return Mechanism | Dual Preloaded Tension Springs |
| Mounting Configuration Options | Left-Hand (L1/L1A), Right-Hand (1/1A), Center-Driven (C1/C1A), Vertical-Mount (C2/C2A) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | PSMX25 |
| Drive Mechanism | Micrometer or M7×0.25 Threaded Actuator |
| Travel Range | ±12.5 mm |
| Minimum Graduation | 0.01 mm (micrometer variants) |
| Sensitivity | 0.001 mm |
| Platform Dimensions | 65 × 65 mm |
| Load Capacity | 7.0 kg (standard), 2.5 kg (vertical-mount variants) |
| Guidance System | Precision Ground Steel Rod Rails with Linear Ball Bearings |
| Return Mechanism | Preloaded Tension Spring for Backlash Elimination |
| Mounting Configuration Options | Left-hand (L1/L1A), Right-hand (1/1A), Center-drive (C1/C1A), Vertical-use (C2/C2A) |
| Brand | ZOLIX |
|---|---|
| Model | QF Series |
| Type | Motorized Air-Bearing Translation Stage |
| Base Material Options | Aluminum (A), Granite (S), Silicon Carbide (C) |
| Guide Type | Aerostatic (Air Float) Linear Bearing |
| Drive | Coreless Linear Motor |
| Encoder Resolution | 20 nm |
| Bidirectional Repeatability | ≤ 0.3 µm |
| Straightness | 1–5 µm (depending on travel and base material) |
| Pitch/Yaw | ≤ 4.5 arcsec |
| Load Capacity | 10–15 kg/µm |
| Operating Environment | Class 10,000–100,000 Cleanroom, 20 ± 1 °C, 40–60% RH, 0.5 MPa Filtered & Dried Compressed Air |
| Compliance | GB/T 17421.2 (Geometric Accuracy Testing of Machine Tools), ISO 230-2 (Test Code for Positioning Accuracy) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic Optical Component |
| Model | QWLO |
| Pricing | Available Upon Request |
| Wavelength Range | 488–1064 nm |
| Diameter Options | 12.7 mm & 25.4 mm |
| Plate Type | Low-Order Quartz Waveplate (λ/4 & λ/2) |
| Coating Options | Uncoated or Broadband Anti-Reflection (AR) Coated (400–1100 nm) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | RACA Series |
| Price Range | USD 0.15 – 750 (FOB) |
| Compatible Rail System | RAOB Series Precision Linear Rails |
| Structural Design | Precision-Machined Dovetail Interface |
| Locking Mechanism | Reinforced Plastic-Tipped Knurled Handwheel with High-Grip Torque Transfer |
| Mounting Flexibility | Multi-Position Threaded Holes (M4, M6, and 1/4"-20 UNC) |
| Width Variants | RACA-1 (25 mm), RACA-2 (40 mm), RACA-3 (60 mm), RACA-4 (60 mm w/ Lateral Micrometer Adjustment) |
| RACA-4 Specific Actuation | M6×0.25 Fine-Pitch Stainless Steel Translation Screw |
| RACA-4 Guidance | Hard-Anodized Linear Ball Bearing Raceway |
| RACA-4 Return Mechanism | Dual Preloaded Compression Springs (Force: 8.5 N ±0.3 N) |
| Repeatability | ≤ ±1.5 µm (per ISO 10110-7 compliant test protocol under 23 °C ±1 °C, 45–55% RH) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | RAK Series |
| Pricing | Available Upon Request |
| Drive | Stepper Motor |
| Gear Ratio | 180:1 (RAK100/RAK200), 320:1 (RAK350) |
| Resolution (8-Microstep) | 0.00125° (RAK100/RAK200), 0.0007° (RAK350) |
| Max Speed | 25°/s (RAK100), 14°/s (RAK200/RAK350) |
| Repeatability | <0.005° (RAK100), <0.003° (RAK200/RAK350) |
| Radial Runout | <15″ (RAK100), <10″ (RAK200), <20″ (RAK350) |
| Axial Runout | <15″ (RAK100), <10″ (RAK200), <20″ (RAK350) |
| Motor | 42 mm (1.8° step angle, 1.7 A) for RAK100 |
| Central Load Capacity | 30 kg (RAK100), 50 kg (RAK200), 100 kg (RAK350) |
| Construction Material | Anodized Aluminum Alloy |
| Encoder Option | Compatible with rotary encoder or circular grating for closed-loop operation |
| Control Interface | Standard TTL/RS-422 digital I/O, compatible with ZOLIX MC-Series motion controllers |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RAOB-M |
| Rail Width Options | 22 mm (RACA-M1), 35 mm (RACA-M2), 56 mm (RACA-M3) |
| Mounting Interface | Precision Machined Dovetail (Miniature燕尾) |
| Load Capacity | Designed for Light-Duty Optical Components (e.g., Mirrors, Lenses, Diode Mounts, Fiber Couplers) |
| Material | Anodized Aluminum Alloy (6061-T6) |
| Surface Finish | Hard-Anodized, Class II, Black |
| Tolerance | ±0.02 mm Linear Dimensional Accuracy |
| Compatibility | Standard 1/4"-20 and M6 threaded mounting holes on carriage base |