Optical Instruments
Filter
Showing 1741–1770 of 7431 results
| Brand | Chromacity |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Spark–OPO |
| Core Component | Solid-State Laser System |
| Pump Wavelength | 1040 nm |
| Repetition Rate | 100 MHz |
| Signal Wavelength Range | 1.48–1.9 µm |
| Signal Output Power | 100 mW @ 1.5 µm |
| Idler Wavelength Range | 2.1–3.6 µm |
| Idler Output Power | 20 mW @ 3.3 µm |
| Beam Quality (M²) | <1.1 |
| Polarization | Linear |
| Beam Divergence | <2 mrad |
| Output Configuration | Free-Space, Three Independent Ports |
| Cooling Method | Air-Cooled |
| Control Interface | Ethernet |
| Laser Head Dimensions | 765 × 240 × 82 mm |
| Controller Dimensions | 483 × 285 × 86 mm |
| Laser Head Weight | 18 kg |
| Controller Weight | 2 kg |
| Power Supply | 110–240 V AC, 50–60 Hz |
| Brand | CILAS |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MONO31-100 LULI |
| Pricing | Upon Request |
| Brand | Cinogy |
|---|---|
| Origin | Germany |
| Model | AUT-BPPM-LP Series Laser Beam Profiler and Power Meter |
| Wavelength Range | 150–1700 nm |
| Max. Measurable Power | 1 W |
| Min. Resolvable Spot Diameter | 22 µm |
| Max. Measurable Spot Diameter | 11 mm |
| Detector Type | CinCam CMOS Camera |
| Spectral Response | 150–1700 nm |
| Spatial Resolution (min) | 2.2 µm |
| Interface Options | USB 2.0 / USB 3.0 / GigE |
| Cooling Method | Air-cooled |
| Software | RayCi Beam Analysis Suite |
| Brand | Cinogy |
|---|---|
| Origin | Germany |
| Model | AUT-NFBP Series Laser Beam Profiler |
| Wavelength Range | 200–1600 nm |
| Max. Measurable Power | 500 W |
| Minimum Resolvable Spot Diameter | 1 µm |
| Detector | High-Performance CinCam Camera |
| Software | RayCi Control & Analysis Suite |
| Optional Magnification | 4×–100× |
| Cooling Options | Air-Cooled & Water-Cooled |
| Interface | USB 2.0 / USB 3.0 / GigE |
| Brand | Cinogy |
|---|---|
| Origin | Germany |
| Model | CinAlign / CinFocus for Telecom Applications |
| Wavelength Range | 320–1610 nm (covering 850 nm, 1310 nm, 1550 nm) |
| Spot Size Measurement Range | CinAlign: 52 µm – 4 mm |
| CinFocus | 1.1 µm – 4 mm |
| Camera Sensors | CinCam CMOS-1202 (320–1350 nm), CinCam CMOS-1201-IR (1470–1610 nm) |
| Pixel Size | 5.2–5.3 µm |
| Resolution | 1280 × 1024 |
| Bit Depth | 8-bit |
| Dynamic Range | >61 dB |
| Interface | USB 2.0 |
| Operating Modes | CW and pulsed (CinAlign) |
| Microscope Objectives | 10×, 20×, 40× (CinFocus) |
| Attenuation Options | OD 1.0–OD 5.0 |
| Max Input Power (CinFocus) | 100 mW |
| Compliance | ISO 11146-1/-2, ISO 13694, ISO 11554, IEC 60825-1 |
| Brand | Cinogy |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | CinAlign Beam Profiler |
| Price | Upon Request |
| Wavelength Range | 320–1610 nm |
| Spot Size Range | 1.1 µm – 4 mm |
| Sensor Types | CinCam CMOS-1202 (400–1350 nm), CinCam CMOS-1201-IR (1470–1610 nm) |
| Pixel Resolution | 1280 × 1024 |
| Pixel Pitch | 5.2–5.3 µm |
| Dynamic Range | >61 dB |
| Interface | USB 2.0 |
| Software | RayCi-Lite (upgradable to Standard/Pro) |
| Brand | auniontech (Distributor) |
|---|---|
| Origin | Germany |
| Manufacturer | Cinogy GmbH |
| Model | CinCam Pico CMOS-1201-Pico |
| Sensor Type | CMOS |
| Active Area | 5.7 mm × 4.3 mm |
| Pixel Count | 2560 × 1920 |
| Pixel Size | 2.2 µm × 2.2 µm |
| Spectral Range (Standard) | 400–1150 nm |
| Optional Ranges | 150–1150 nm (UV), 240–1150 nm (OM), 320–1150 nm (RT), 400–1320 nm + 1470–1605 nm (IR) |
| Dynamic Range | 70 dB |
| Mechanical Dimensions | 15 mm × 15 mm × 11.5 mm |
| Interface | USB 2.0 |
| Mount | C-mount / F-mount compatible |
| Software | RayCi-Lite / Standard / Pro |
| Data Export Formats | TIFF, PNG, PDF, Excel, AVI, MP4 |
| Compliance | CE, RoHS, ISO 9001 manufacturing environment |
| Brand | Cinogy |
|---|---|
| Origin | Germany |
| Model | UV_NIR_beam_profiler |
| Sensor Types | CMOS / CCD / InGaAs |
| Spectral Range | 150–1700 nm |
| Interface | USB 2.0/3.0, FireWire 1394b, GigE |
| Mount | C-Mount / F-Mount |
| Cooling | Passive air-cooled (CCD), TE-cooled (InGaAs) |
| Software | RayCi Lite / Standard / Pro |
| Brand | Cinogy |
|---|---|
| Origin | Germany |
| Model | CinSpot AUT-1204 |
| Wavelength Range | 320–1150 nm |
| Minimum Measurable Focus Spot Size | 22 µm |
| Power Handling | Air-Cooled ≤ 5 W, Water-Cooled ≤ 100 W or 200 W (configurable) |
| Energy Density Limits | CW ≤ 100 MW/cm², Pulsed ≤ 2 GW/cm² |
| Focus Position Accuracy | ±100 µm |
| Spot Size Measurement Accuracy | ±3–5% (typical) |
| Interface | USB 3.0 |
| Software | RayCi-Pro |
| Compliance | CE, RoHS |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Industrial_M2_measurement_system |
| Pricing | Upon Request |
| Brand | Cinogy |
|---|---|
| Origin | Germany |
| Model | PowerCube Series Beam Profiling System |
| Wavelength Range | 200–1600 nm |
| Minimum Measurable Beam Diameter | >10 µm |
| Maximum Power Handling | 500 W |
| Dimensions | 100 × 100 × 85 mm (standard) / 100 × 100 × 93 mm (with power meter) |
| Detector | High-Performance CinCam CMOS/InGaAs Sensor |
| Interface | USB 2.0 / USB 3.0 / GigE |
| Cooling Options | Air-Cooled or Water-Cooled |
| Software | RayCi v5.x with M², Rayleigh Range, Divergence, Beam Waist, Stability, Encircled Energy (EF), and Power/Energy Integration Modules |
| Brand | Cinogy |
|---|---|
| Origin | Germany |
| Model | NanoSight NS Series |
| Wavelength Range | 200–1600 nm |
| Minimum Measurable Spot Diameter | >1 µm |
| Maximum Numerical Aperture | >0.65 |
| Maximum Power Handling | 500 W |
| Detector | High-Performance CinCam Camera |
| Software | RayCi Beam Analysis Suite |
| Cooling Options | Air-Cooled & Water-Cooled |
| Interface | USB 2.0 / USB 3.0 / GigE |
| Brand | CIQTEK |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | SEM3300 |
| Instrument Type | Floor-Standing Conventional SEM |
| Electron Source | Tungsten Filament |
| SEM Class | Entry-Level Tungsten-Filament SEM |
| Secondary Electron Resolution | 2.5 nm @ 20 kV |
| Magnification Range | 1× to 300,000× |
| Accelerating Voltage | 0.1 kV to 30 kV |
| Stage Travel | X: 120 mm |
| Y | 115 mm |
| Z | 50 mm |
| Brand | Civan |
|---|---|
| Power Options | 7 kW / 14 kW / 28 kW |
| Operation Mode | CW & Modulated |
| Polarization | Circular |
| Wavelength | 1064 ± 1 nm |
| Beam Delivery | Free-space collimated output |
| Beam Shape Control | Software-defined static & dynamic profiles (up to 50 MHz shape update rate) |
| Focus Tuning | Dynamic depth-of-focus adjustment via optical phase control |
| Core Technology | Coherent Beam Combination (CBC) + Optical Phased Array (OPA) |
| Compliance | Designed for industrial integration per ISO 11553-1 (laser safety), IEC 60825-1, and compatible with GLP/GMP-aligned process documentation workflows |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Key Components | Semiconductor Laser Module |
| Model | ClarityPlus |
| Wavelength Range | 1528–1567 nm |
| Absolute Accuracy (Reference Mode) | ±0.1 pm |
| Absolute Accuracy (ITU Grid Mode) | ±1 pm |
| Allan Deviation (100 s) | <1×10⁻⁹ |
| Laser Linewidth | <500 kHz |
| ITU Channel Spacing Options | 100 / 50 / 25 GHz |
| ITU Frequency Offset Range | 0–50 GHz |
| Operating Temperature | 15–45 °C |
| Side Mode Suppression Ratio | >35 dB |
| Relative Intensity Noise | <−140 dB/Hz |
| Output Power | +10 dBm |
| Power Stability | ±0.025 dB over 24 h |
| Polarization | Polarization-Maintaining (PM) Fiber Output |
| Connector | SC/APC |
| Internal Reference | NIST-Traceable H¹³C¹⁴N Molecular Absorption Cell |
| Brand | Easysensor |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | PO2100 (01) |
| Imaging Resolution | 5472 × 3678 pixels |
| Camera Sensor | 20 MP Color CCD |
| Excitation/Emission Band | 400–500 nm |
| Application Domain | Geoscience, Environmental Biogeochemistry, Rhizosphere Research |
| Brand | CNCS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | BH1218 |
| Pricing | Upon Request |
| Gain Range | 5–750× (continuously adjustable) |
| Long-term Gain Stability | ≤0.1% (over 8 h) |
| Temperature Coefficient of Gain | ≤0.015%/°C |
| Integral Nonlinearity | ≤0.2% |
| Input-Referred Noise | ≤15 µV RMS |
| Overload Recovery | Recovers to within 2% of baseline at 2.5× nominal pulse width after 200× overload |
| Input Polarity | Positive or Negative |
| Output Polarity | Positive |
| Output Impedance | 50 Ω |
| Shaping Time Constants | 0, 0.5, 1, 2, 3, 4, 5, 6 µs |
| Operating Temperature | 0–50 °C |
| Relative Humidity | ≤90% at +40 °C |
| Power Supply | ±24 V / 30 mA, ±12 V / 10 mA |
| Power Consumption | 2 W |
| Brand | CNCS |
|---|---|
| Origin | Beijing, China |
| Model | BH1219A |
| Form Factor | NIM-standard 1-unit-width module |
| Dynamic Range | Threshold 0.1–10 V |
| Stability | Threshold drift ≤ ±15 mV (8 h), Channel width drift ≤ ±15 mV (8 h), Delay drift ≤ ±15 ns (8 h) |
| Temperature Coefficient | ≤ 1.5 mV/°C (threshold & channel width) |
| Linearity | Threshold integral linearity ≤ 0.5% |
| Operating Temperature | 0–50 °C |
| Relative Humidity | ≤ 90% at 40 °C |
| Brand | CNCS |
|---|---|
| Origin | Beijing, China |
| Model | FH1016A |
| Output Voltage Range | ±300 V to ±3 kV (3-range selectable: 0–1 kV, 0–2 kV, 0–3 kV) |
| Rated Output Current | 0–500 µA |
| Output Ripple | ≤20 mV (p-p) |
| Voltage Stability | ≤±0.1% over 8 hours |
| Operating Temperature | 0–50 °C |
| Form Factor | 2-unit NIM module |
| Polarity | Selectable positive or negative DC output |
| Application | Bias supply for nuclear radiation detectors (e.g., PMTs, SiPMs, proportional counters) |
| Brand | CNCS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FH1047A |
| Pricing | Available Upon Request |
| Charge Sensitivity | 1×10¹² V/C or 40 mV/MeV (Si) |
| Noise Performance (FWHM, Si) | ≤2.2 keV + 0.05 keV/pF (Type A, typical 1.5 keV + 0.04 keV/pF) / ≤2.5 keV + 0.03 keV/pF (Type B, typical 1.5 keV + 0.03 keV/pF) |
| Output Pulse Rise Time | ≤30 ns (with zero external capacitance) |
| Max Linear Output Range | +2 V (1 kΩ load) |
| Operating Temperature | 0–50 °C |
| Relative Humidity | ≤90% at +40 °C |
| Brand | CNCS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FH1048A |
| Price | Upon Request |
| Gain | 5× |
| Gain Stability | ≤±0.03% over 8 h continuous operation |
| Integral Nonlinearity | ≤0.5% (with 1 kΩ load, 2 V output) |
| Input Impedance | ≥500 kΩ |
| Rise Time | ≤30 ns |
| Operating Temperature | 0–50 °C |
| Relative Humidity | ≤90% at 40 °C |
| Brand | CNCs (China Nuclear Control Systems) |
|---|---|
| Model | FH1093B |
| Form Factor | 4U NIM Module |
| Input Polarity | Positive |
| Pulse Width Minimum | ≥0.1 µs |
| Dead Time (Dual-Pulse Resolution) | ≤300 ns |
| Discrimination Threshold Range | 0.2–5 V (continuously adjustable, three identical channels) |
| Threshold Temperature Coefficient | 1 mV/°C (0–50 °C) |
| Overload Capacity | 5× nominal threshold |
| Maximum Count Rate | ≥2 × 10⁶ s⁻¹ |
| Count Capacity | 10⁷–1 (seven-digit down-counter) |
| Timing Range | K × 10ⁿ (K = 1–9 |
| Operating Temperature | 0–50 °C |
| Relative Humidity | ≤90% at +40 °C |
| Power Supply | Standard NIM bin (+6 V, −6 V, +12 V, −12 V) |
| Brand | CNCS (China Nuclear Control System) |
|---|---|
| Origin | Beijing, China |
| Model | FH463B |
| Input Impedance | 1 kΩ |
| Input Coupling | AC |
| Pulse Width Range | 0.1 µs – 100 µs |
| Dead Time | ≤200 ns |
| Threshold Range | 0.1 V – 5.0 V (adjustable, linearity deviation ≤±0.5%) |
| Window Width Range | 0.1 V – 3.0 V |
| Polarity | Positive or Negative (input & HV output) |
| Timing Range | K×10ⁿ s (K = 1–9, n = 0–6) |
| Max Count Rate | ≤4.5 MHz |
| Max Count Capacity | 1.5×10⁷ − 1 |
| HV Output Range | ±50 V to ±1500 V (±10 V resolution, stability ≤±0.3% over 8 h after 30-min warm-up) |
| HV Current Limit | ≤600 µA |
| HV Ripple | ≤50 mV RMS |
| HV Temp. Coefficient | ≤±0.05 %/°C |
| Discriminator Temp. Coefficient | ≤±3 mV/°C |
| Low-Voltage Outputs | ±10 V, +5 V |
| Communication Interface | RS-232 (9600 baud, pinout: 3-TXD, 5-GND) |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤90% at 30 °C |
| Power Supply | 220 V ±10%, 50 Hz |
| Brand | CNCs (China Nuclear Control Systems) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Model | FJ365 |
| Pricing | Available Upon Request |
| Brand | CNMC (China Nuclear Control System) |
|---|---|
| Origin | Beijing, China |
| Model | BH1220 |
| Form Factor | 2-unit NIM Standard Module |
| Discrimination Threshold Range | 0.2–5 V |
| Input Polarity | Positive or Negative (Front & Rear Panel Inputs) |
| Input Pulse Width | 0.1–100 µs |
| Dead Time (Dual-Pulse Resolution) | ≤300 ns |
| Timing Range | K×10ⁿ (K = 1–9 |
| Maximum Counting Rate | ≥2 MHz |
| Overload Capacity of Discriminator | 5× nominal threshold |
| Count Capacity | 10⁷ – 1 |
| Max Instantaneous Power Consumption | 2.7 W |
| Operating Temperature | 0–50 °C |
| Relative Humidity | ≤90% at +40 °C |
| Brand | CNOPTEC |
|---|---|
| Origin | Chongqing, China |
| Model | BK-POL |
| Optical System | OTICS Infinity-Corrected Achromatic Polarizing System |
| Eyepieces | 10× Widefield High-Eye-Point Plan Eyepieces (Field Number Φ22 mm / Φ20 mm) |
| Objectives | Infinity-Corrected Stress-Free Plan Objectives — Transmitted Light: 4× / 10× / 20×(S) / 40×(S) / 60×(S) |
| Reflected Light | 5× / 10× / 20× / 50×(S) |
| Observation Tube | Hinged Binocular or Trinocular Tube, 30° Inclination, Interpupillary Adjustment 48–76 mm, Right Eyepiece Tube Coupled |
| Nosepiece | Five-Position Inclined, Center-Adjustable Revolving Nosepiece |
| Analyzer Assembly | 360° Rotatable, Lockable, Removable Analyzer Module with Focus-Adjustable Bertrand Lens |
| Polarizer | 360° Rotatable, Graduated, Lockable Polarizer |
| Compensators | λ (First-Order Red), λ/4, and Quartz Wedge (I–IV Order) Insertion Plates |
| Focusing Mechanism | Coaxial Coarse/Fine Focus — Coarse Travel 25 mm, Fine Focus 0.2 mm per Revolution, Graduation 2 µm, Upper Limit Stop, Tension Adjustment |
| Stage | 360° Rotatable Polarizing Stage with Centering Adjustment, Scale Division 1°, Vernier Division 6′, Diameter Φ174 mm |
| Condenser | N.A. 0.9 / 0.13 Swing-Out Condenser |
| Illumination | Transmitted — 6 V / 30 W Halogen or 5 W LED (100–240 V AC Input) |
| Mechanical Stage | Polarization-Specific Translation Stage |
| C-Mount Photo Adapters | 0.5× / 0.75× / 1× |
| Optional Heating Stage | Temperature Range RT–400 °C, Accuracy ≤ ±0.5 °C Full Scale, Touchscreen Control & Data Logging, Response Time ≤ 0.01 s, Max Load 200 g, Working Surface Φ31.5 mm, Compatible with Both Transmission and Reflection Modes |
| Brand | CNOPTEC |
|---|---|
| Origin | Chongqing, China |
| Model | SMARTe |
| Sensor | 3.2 MP or 5 MP 1/2″ Progressive Scan CMOS |
| Max Resolution | 2048×1536 px (3.2 MP) / 2952×1944 px (5 MP) |
| Frame Rate | 15–30 fps |
| Optical Coupling | 0.5× C-mount adapter |
| Interface | USB 2.0 (480 Mbps, bus-powered) |
| OS Compatibility | Windows |
| Software | OPTPro Microscopic Image Analysis Suite |
| Brand | CHIPNOVA |
|---|---|
| Model | CNT-OTAR-S |
| Holder Type | In Situ Tomographic Sample Holder |
| Compatible TEM Platforms | Thermo Fisher/FEI, JEOL, Hitachi (HR)TEM/STEM |
| Sample Mounting Options | Single-Axis Tip & C-Type Tip |
| Tip Exchangeable | Yes |
| Tip Configurations | 3 mm Half-Grid (C-Type), Rod/Conical (Single-Axis) |
| Maximum Tilt Range | ±54° (Tomographic Series) |
| Tilt Increment | 6° |
| Drift Rate | <0.5 nm/min (Stabilized State) |
| Holder Body Material | High-Strength Titanium Alloy |
| EDS/EELS/SAED Compatibility | Fully Supported |
| Application Domain | Materials Science, Nanogeology, In Situ Structural Analysis |
| Compliance | Designed for GLP-aligned electron tomography workflows |
| Brand | Cobolt |
|---|---|
| Origin | Sweden |
| Model Series | 04-01 (SLM) & 05-01 (Single-Frequency) |
| Wavelength Range | 354.8–1064 nm |
| Spectral Linewidth | < 1 MHz (< 0.01 pm) |
| Spatial Mode | TEM₀₀, M² < 1.1 |
| Beam Diameter (aperture) | 0.7–1.0 mm |
| Beam Divergence (full angle) | < 0.8–1.6 mrad |
| Power Stability (8 h, ±3 °C) | < 2–3% (pk-pk) |
| RMS noise (20 Hz–20 MHz) | < 0.1–0.25% |
| Polarization Ratio | > 100:1 |
| Operating Temperature | 10–40 °C |
| Laser Head Dimensions | 103×60×40 mm (04-01), 125×70×45 mm (05-01) |
| Controller Dimensions | 190×72×28 mm |
| Communication | RS-232 or USB |
| Power Consumption | < 35 W (04-01), < 63 W (05-01) |
| Warranty | 24 months (04-01), 12 months (05-01) |
| Brand | Cobolt |
|---|---|
| Origin | Sweden |
| Model | newopto |
| Wavelength Options | Any two of 457, 473, 491, 515, 532, 561, or 594 nm |
| Spectral Linewidth | <1 MHz (<0.01 pm) |
| Spatial Mode | TEM₀₀, M² < 1.1 |
| Beam Diameter (at aperture) | 700 µm |
| Full-Angle Beam Divergence | <1.2 mrad |
| Beam Overlap | <250 µrad |
| Long-Term Power Stability (8 h, ±3 °C) | <3% |
| Beam Pointing Stability (10–40 °C) | <25 µrad/°C |
| Polarization Ratio (linear) | >100:1 |
| Total Power Consumption | <70 W (typ. <30 W) |
| Operating Temperature | 10–40 °C |
| Heat Sink Thermal Resistance | 0.5 K/W |
| Dual Combiner Dimensions | 190 × 65 × 46 mm |
| Controller Dimensions | 190 × 72 × 28 mm |
| Communication Interface | RS-232 or USB |
| Shutter Modulation Frequency | 125 Hz |
| Shutter Rise Time | <350 µs |
| Warranty | 24 months |