Other Water Quality Analysis Instruments
Filter
Showing 361–367 of 367 results
| Brand | Zhuochi |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | AOX-WK-S |
| Pricing | Available Upon Request |
| Brand | Zhuochi |
|---|---|
| Model | AOX-WK-S |
| Origin | Zhejiang, China |
| Instrument Type | Microcoulometric AOX Analyzer |
| Compliance Standard | HJ 1214–2021 (Effective June 1, 2022) |
| Application | Adsorbable Organic Halogens (AOX) in Water |
| Detection Principle | Microcoulometric Titration after High-Temperature Combustion and Halogen Capture |
| Configuration | Complete System with Dual-Zone Combustion Furnace, Halogen Adsorption Column, Sample Introduction/Withdrawal Modules, and Integrated Coulometric Detector |
| Brand | Zhuochi |
|---|---|
| Model | AOX-WK-S |
| Standard Compliance | HJ 1214–2021 (PRC Environmental Standard for AOX Determination) |
| Measurement Principle | Microcoulometric Titration after High-Temperature Combustion |
| Detection Target | Adsorbable Organic Halogens (AOX) in Water |
| Temperature Control | Dual-Zone Combustion Furnace with Precise Airflow-Regulated Thermal Management |
| Sample Introduction | Automated Solid/Liquid Injector with Inert Carrier Gas Delivery |
| Halogen Capture & Quantification | Silver Coulometric Cell with Real-Time Charge Integration |
| Adsorption System | Activated Carbon Column Assembly per HJ 1214–2021 Protocol |
| Data Output | Integrated Coulometric Signal Processing Unit with Calibration Traceability |
| Brand | Zhuochi |
|---|---|
| Model | WK-3 |
| Origin | Zhejiang, China |
| Compliance | GB/T 34845-2017 |
| Detection Principle | Microcoulometric Titration |
| AOX Range | 0.5–5000 mg/L as Cl⁻ |
| Combustion Temp | 500–1000 °C (±1% ±5 °C) |
| Generator Current | ±2 mA |
| Amplifier Output | ±30 V |
| Bias Voltage | 0–500 mV (adjustable) |
| Repeatability | ≤5% (≥10 mg/L), ≤10% (1–10 mg/L), ≤50% (<1 mg/L) |
| Power | 220 V AC ±10%, 50 Hz, 3000 W |
| Brand | Zming Environmental Technology Co., Ltd. |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HQ-3700 Automated Fluoride Water Quality Analyzer |
| Pricing | Upon Request |
| Detection Limit | 0.02 mg/L |
| Measurement Principle | Ion-Selective Electrode (ISE) with Colorimetric Compensation |
| Sample Handling | Fully Automated Online/Grab Sampling |
| Reagent Shelf Life | 3 Months |
| Calibration | Auto-calibration with Standard Solutions |
| Interference Compensation | Automatic Chromaticity and Turbidity Correction |
| Fluidic System | Capacitive Volume Metering |
| Data Output | RS485/Modbus, 4–20 mA, Ethernet |
| Compliance | Designed for ISO 10523, ASTM D3869, and EPA Method 300.0 alignment |
| Brand | Zming Environmental Technology Co., Ltd. |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TSC-10 Temperature Chain Profiling System |
| Pricing | Available Upon Request |
| Number of Sensors | 10 |
| Operating Temperature Range | −55 °C to +80 °C |
| Accuracy | ±0.2 °C (−40 °C to +85 °C, typical), ±0.4 °C (−40 °C to +85 °C, worst-case), ±0.5 °C (−55 °C to −40 °C) |
| Max Pressure Rating | 150 PSI |
| Communication Protocol | RS-485 / MODBUS-RTU |
| Sensor Spacing | Customizable (min. 12 cm) |
| Max Chain Length | 155 m |
| Max Sensor Capacity | 150 nodes |
| Sensor Diameter | 5 cm |
| Supply Voltage | 3.3–24 V DC |
| Current Consumption | 10 mA + (N × 1 mA), where N = number of active sensors |
| Warm-up Time | 10 s |
| Minimum Sampling Interval | 10 s |
| Standard Cable Length Options | 10 m, 20 m, 50 m |
| Optional Sensor Integration | Dissolved Oxygen (DO), Conductivity |
| Brand | Zming Environmental Technology Co., Ltd. |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HQ-6700 Silicate Auto Analyzer |
| Pricing | Upon Request |