Peristaltic Pump
Filter
Showing 1–30 of 198 results
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | 150F |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.0013–140 mL/min |
| Motor Speed | 0–150 rpm |
| Display | 3.0-inch HD TFT Touchscreen |
| Operating Modes | Flow Mode, Timer Mode, Volume Mode |
| Calibration | Multi-point flow calibration supported |
| External Control | RS-485 communication interface, analog/digital I/O for start/stop and speed modulation |
| Compatible Pump Heads | F154, F156, TH15 |
| Compatible Tubing Sizes | ID 1.6 mm (13#), 2.4 mm (14#), 3.2 mm (19#), 4.8 mm (16#), 6.4 mm (25#) |
| Flow Adjustment | Real-time in-run flow/speed adjustment |
| Parameter Guidance | Dynamic display of achievable flow range based on selected tubing and pump head |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Model | 150F-BX |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.0013 mL/min – 140 mL/min |
| Speed Range | 0.1 – 150 rpm |
| Max. Speed | 150 rpm |
| Display | 3.0-inch HD capacitive touchscreen |
| Power Supply | DC 25.6 V / 1 A |
| Battery Capacity | 2.5 Ah (Li-ion) |
| Operating Time on Battery | ~4 hours at room temperature |
| Operating Environment | 0–40 °C, 20–85% RH (non-condensing) |
| Ingress Protection | IP31 |
| Dimensions (L×W×H) | 156 × 118 × 130 mm |
| External Control Inputs | 0–5 V, 0–10 V, 4–20 mA, 0–10 kHz |
| Communication Interface | RS485 (configurable address, 9600 bps) |
| Status Outputs | Run/Stop, Direction |
| Flow Quantification Units | µL, mL, L, mg, g, kg |
| Timing Range | 0.1 s – 6553.5 min (or hr) |
| Backflow Angle Adjustment | 0–999° |
| Compatible Pump Heads | F154, F156 |
| Compatible Tubing Sizes | #13, #14, #16, #19, #25 |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BT-100B |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.00013–560 mL/min |
| Maximum Speed | 150 rpm |
| Pump Head Compatibility | YZ1513, YZ2513S, BZ, DG, DMD1513 |
| Control Modes | Manual Keypad & External Analog/Digital Input |
| Display | Real-time RPM, Direction, and Operational Status |
| Direction | Bidirectional (Forward/Reverse) |
| Keypad Lock | Configurable via Key Combination |
| Max Speed Limit | User-Settable via Front Panel |
| Brand | Acmer |
|---|---|
| Model | BT-100U |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.00013–560 mL/min |
| Maximum Speed | 150 rpm |
| Compatible Pump Heads | YZ1513, YZ2513S, BZ, DG, DMD1513 |
| Control Interfaces | Keypad, Foot Switch, Analog Voltage Input (0–5 V / 0–10 V), RS485 (Modbus RTU) |
| Display | Real-time Speed, Direction, and Operational Status |
| Direction Control | Bidirectional (Forward/Reverse) |
| Speed Limit Setting | User-configurable maximum rpm via keypad |
| Keypad Lock | Password-free key combination lock to prevent accidental parameter changes |
| Optional Leak Detection | External sensor integration with configurable response logic (e.g., stop pump, alarm, log event) |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | BT-300B |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.0063–1490 mL/min |
| Maximum Speed | 400 rpm |
| Pump Head Compatibility | YZ1513, YZ2513S, BZ, DMD1513 |
| Control Modes | Manual Keypad + External Analog/Digital Input (0–5 V / 0–10 V / 4–20 mA / TTL) |
| Display | Real-time RPM, Direction, and Operational Status |
| Direction | Bidirectional (Forward/Reverse) |
| Keypad Lock | Configurable via Key Combination |
| Max Speed Limit | User-Settable via Front Panel |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | BT-300U |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.0063–1950 mL/min |
| Maximum Speed | 400 rpm |
| Control Interfaces | Keypad, Footswitch, Analog/Digital External Input, RS485 (Modbus RTU) |
| Display | Real-time RPM, Rotation Direction, Operational Status |
| Direction Control | Bidirectional (Forward/Reverse) |
| Speed Limit Setting | User-configurable maximum RPM via keypad |
| Keypad Lock | Combination-key lock to prevent accidental parameter changes |
| Leak Detection Support | Optional leak sensor module with programmable response logic (e.g., stop, alarm, pause) |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BT-600B |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.0063–2600 mL/min |
| Maximum Speed | 600 rpm |
| Compatible Pump Heads | YZ1513, YZ2513S, BZ, DMD1513 |
| Control Modes | Manual Keypad + External Analog/Digital Input (0–5 V / 4–20 mA / TTL) |
| Display | Real-time RPM, Rotation Direction, Operating Status |
| Direction | Bidirectional (Forward/Reverse) |
| Keypad Lock | Configurable via Key Combination |
| Max Speed Limit | User-Settable via Front Panel |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | BT-600U |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.0063–2600 mL/min |
| Maximum Speed | 600 rpm |
| Control Interfaces | Keypad, Footswitch, Analog/Digital External Input, RS485 (Modbus RTU) |
| Display | Real-time RPM, Rotation Direction, Operational Status |
| Direction Control | Bidirectional (Forward/Reverse) |
| Speed Limit Setting | User-configurable maximum RPM via keypad |
| Keypad Lock | Combination-key lock to prevent accidental parameter changes |
| Leak Detection Support | Optional integrated leak sensor module (configurable response logic) |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | LabMate |
| Instrument Type | Peristaltic Pump |
| Flow Rate Range | 0.032 mL/min – 48 mL/min |
| Speed Range | 0.01 – 150 rpm |
| Speed Resolution | 0.01 rpm |
| Tube ID ≤ 3.17 mm, Wall Thickness | 0.76 – 1.0 mm |
| Quantitative Range | 0.1 µL – 9999.999 L |
| Timing Range | 0.1 s – 999.9 hr |
| Cycle Count | 0 – 65535 (0 = continuous) |
| Retraction Angle | 0 – 65535° |
| Housing Material | POM / PVDF |
| Roller Count | 10 |
| Roller Material | PET or Nylon + MoS₂ |
| Dimensions | 252.5 × 126 × 165 mm |
| Power Supply | AC 90–264 V, 50/60 Hz |
| Operating Environment | 0–40 °C, 20–80% RH (non-condensing) |
| Ingress Protection | IP31 |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | WG600-2J |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.1–12,000 mL/min (tube-dependent) |
| Speed Range | 40–600 rpm |
| Speed Resolution | 1 rpm |
| Power Consumption | <300 W |
| Input Voltage | AC 180–260 V, 50 Hz |
| Operating Environment | 0–40 °C, <80% RH (non-condensing) |
| Dimensions (L×W×H) | 370 × 235 × 240 mm (excl. pump head) |
| Weight | 11.5 kg |
| Ingress Protection | IP31 |
| Display | 4-digit LED (speed/flow toggle) |
| Timing Range | 1 s – 99 h |
| Direction Control | Forward/Reverse |
| External Control Options | 0–5 V analog, 4–20 mA current loop, 0–10 kHz frequency input |
| Communication Interface | RS485 (Modbus RTU protocol) |
| Output Signals | Run/Stop status, direction status, 0–10 kHz pulse output |
| Optional Accessories | Foot switch, external control modules, pump heads for tubing ID 1.6–16 mm |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YG600-2J |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0–12,000 mL/min (dependent on tubing ID and fluid properties) |
| Speed Range | 0–600 rpm |
| Control Method | PWM-controlled DC motor |
| Reversibility | Yes, via toggle switch |
| Display | Digital speed indicator (0–100% scale, 100% = 600 rpm) |
| Power Consumption | <400 W |
| Input Voltage | AC 200–260 V, 50/60 Hz |
| Operating Environment | 0–40 °C, RH <80% non-condensing |
| Enclosure Rating | IP31 |
| Net Weight | 16 kg |
| Dimensions | Not specified in source data |
| Compliance | CE-marked per IEC 61000-6-3/6-2 |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YT600-2J |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | Up to 6000 mL/min (dependent on tubing ID and fluid properties) |
| Speed Range | 0–600 rpm |
| Power Consumption | <80 W |
| Input Voltage | AC 90–260 V, 50/60 Hz |
| Operating Temperature | 0–40 °C |
| Relative Humidity | <80% non-condensing |
| Enclosure Rating | IP31 |
| Net Weight | 5.5 kg |
| Dimensions | Not specified in source data |
| Control Method | PWM-controlled DC motor with analog potentiometer |
| Direction | Reversible via toggle switch |
| Display | Digital LED showing speed percentage (0–100%, where 100 = 600 rpm) |
| Power Indicator | Illuminated rocker switch |
| Brand | Analysis |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HDJS20 |
| Instrument Type | Peristaltic Pump |
| Flow Rate Range | 0.006–1340 mL/min |
| Flow Accuracy | <0.5% |
| Speed Range | 0.1–350 rpm |
| Speed Resolution | 0.1 rpm |
| Power Supply | AC 220V±10%, 50/60 Hz (standard) |
| Power Consumption | <40 W |
| External Control Interfaces | TTL-level input (5 V / 12 V standard, 24 V optional), Analog input (0–5 V standard |
| Operating Temperature | 0–40 °C |
| Relative Humidity | <80% RH |
| Enclosure Rating | IP31 |
| Dimensions (L×W×H) | 255 × 181 × 198 mm |
| Weight | 4.7 kg |
| Brand | Autoscience |
|---|---|
| Origin | Tianjin, China |
| Model | ATP-3200 |
| Flow Rate Range | 0.21–2060 mL/min (dependent on tubing size) |
| Speed Range | 1–460 rpm |
| Speed Resolution | 0.1 rpm |
| Speed Stability | ≤ ±0.3 rpm |
| Max Pressure | 1.5 kg/cm² |
| Max Fluid Viscosity | 2000 cP |
| Operating Temperature | –10–100 °C (fluid), 0–50 °C (ambient) |
| Humidity | <80% RH |
| Dimensions (W×H×D) | 120 × 230 × 270 mm |
| Power Supply | 220 ±15% V, 50 Hz |
| Power Consumption | 150 W |
| Net Weight | 5.5 kg |
| Direction Control | Forward/Reverse |
| Tubing Compatibility | #14, #17, #18, #25 (Pharmed®/Norprene®-compatible) |
| Brand | Autosense |
|---|---|
| Model | ATP-3200 |
| Flow Rate Range | 0.25–2060 mL/min (dependent on tubing size) |
| Speed Range | 1–460 rpm, continuously adjustable |
| Speed Resolution | 0.1 rpm |
| Speed Stability | ≤ ±0.3 rpm |
| Tubing Compatibility | 14#, 16#, 25#, 17#, 18# (Pharmed®/Norprene®-equivalent silicone or thermoplastic elastomer tubing) |
| Max Fluid Pressure | 1.5 kg/cm² (≈147 kPa) |
| Operating Temperature | –10°C to 100°C (fluid), 0°C to 50°C (ambient) |
| Relative Humidity | <80% RH |
| Power Supply | 220 V ±15%, 50/60 Hz |
| Power Consumption | 150 W |
| Dimensions (W×H×D) | 120 × 230 × 270 mm |
| Net Weight | 5.5 kg |
| Direction Control | Forward/Reverse |
| Display | 4-digit LED, showing speed and flow (for three standard tubing sizes) |
| External Interface | TTL/RS-232-compatible control port for programmable automation |
| Compliance | Designed for GLP-compliant lab environments |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | BT101F-YZ15 |
| Price | USD 590 (FOB Shanghai) |
| Speed Range | 0.1–150 rpm |
| Speed Resolution | 0.1 rpm, Accuracy: ±0.2% |
| Flow Range | 0.0002–575 mL/min (dependent on tubing type and pump head) |
| Display | 65,535-color TFT LCD with capacitive touchscreen |
| Power Supply | AC 220 V ±10%, 50/60 Hz |
| Power Consumption | <40 W |
| Operating Environment | 0–40 °C, RH <80% |
| Dimensions (L×W×H) | 223 × 150 × 195 mm |
| Weight | 4.9 kg |
| External Control Interfaces | Isolated TTL start/stop & direction |
| Brand | Bartels |
|---|---|
| Origin | Germany |
| Model | BP7 |
| Pump Type | Piezoelectric Dual-Chamber Micro Diaphragm Pump |
| Flow Rate Range | 100–14,000 µL/min |
| Dimensions | 30 × 15 × 3.8 mm |
| Weight | 2 g |
| Wetted Material | PPSU (Polyphenylsulfone) |
| Operating Temperature | 0–70 °C |
| Lifetime | ≥5,000 h |
| Sterilization Compatibility | Autoclavable (Steam, Ethylene Oxide, Gamma) |
| Control Interface | Analog/Digital (Open-Source Driver Support) |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Behr PLP Series |
| Pricing | Available Upon Request |
| Motor | AC 220 V / 50 Hz (also available in 115 V / 60 Hz variants) |
| Roller Configuration | Dual-roller compression with four guide rollers |
| Flow Range | PLP 330: 0.4–25 L/h |
| PLP 66 | 1.0–45 L/h |
| PLP 3304 | 4.0–245 L/h |
| PLP 1000 | 15–605 L/h |
| Tubing Replacement | Tool-free, rapid exchange design |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | BQ80S / BQ-50S |
| Flow Range (BQ80S) | 0.005–32 mL/min |
| Flow Range (BQ50S) | 0.005–20 mL/min |
| Speed Range (BQ80S) | 0.1–80 rpm |
| Speed Range (BQ50S) | 0.1–50 rpm |
| Speed Resolution | 0.1 rpm |
| Flow Accuracy | < ±0.5% |
| Power Supply | AC 220 V ±10%, 50/60 Hz (standard) |
| Power Consumption | <9 W (BQ80S), <8 W (BQ50S) |
| Communication Interface | RS485 with MODBUS RTU protocol |
| Control Inputs | Opto-isolated TTL-compatible digital inputs (5 V / 12 V / 24 V selectable) |
| Enclosure Rating | IP31 |
| Operating Temperature | 0–40 °C |
| Relative Humidity | <80% RH (non-condensing) |
| Dimensions (L×W×H) | 112 × 96 × 96 mm |
| Weight | 0.72 kg (BQ80S), 0.70 kg (BQ50S) |
| Pump Tube | Integrated Pharmed® BPT tubing (FZ10 pump head), rated for 7,500 h (BQ80S) or 12,000 h (BQ50S) continuous operation |
| Housing Material | Flame-retardant ABS with conformal-coated PCBs |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | BT-200 |
| Price | USD 465 (FOB Shanghai) |
| Dimensions | 200 × 230 × 140 mm |
| Channels | Dual independent |
| Flow Rate Range | 2 × (1–6800) mL/h |
| Maximum Back Pressure | ≥2.5 kg/cm² |
| Display | LED digital interface with real-time flow monitoring |
| Drive Mechanism | Brushless DC motor with precision roller assembly |
| Tubing Compatibility | Standard silicone or Tygon® tubing (ID 1.6–6.4 mm) |
| Enclosure Rating | IP20 |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BT-600C |
| Dimensions (W×D×H) | 240 × 300 × 170 mm |
| Number of Channels | 6 |
| Flow Rate per Channel | 10–30,000 mL/h |
| Maximum Pressure | ≥2 kgf/cm² |
| Display | Digital LED |
| Power Supply | AC 220 V, 50 Hz |
| Compliance | CE-marked for laboratory use under IEC 61010-1 |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China) |
| Model | BT100-12 |
| Price | USD 845 (FOB Shanghai) |
| Output Channels | 12 |
| Flow Rate per Channel | 0.3–5000 mL/h |
| Maximum Pressure | ≥2.5 kg/cm² (≈245 kPa) |
| Dimensions (W×D×H) | 120×350×120 mm |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | BT-100D |
| Price | USD 465 (FOB Shanghai) |
| Dimensions | 160 × 270 × 180 mm |
| Flow Channels | Single-channel |
| Flow Rate Range | 1–6800 mL/h |
| Maximum Back Pressure | ≥3 kg/cm² (≈294 kPa) |
| Timing Range | 1 min – 19 h 59 min |
| Speed Display | Digital LED |
| Speed Control | Stepless, digitally calibrated |
| Compliance | CE-marked per EN 61000-6-2/6-4 |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Peristaltic Pump |
| Model | BT-100D |
| Flow Rate Range | 0.00013–560 mL/min |
| Speed | 150 rpm |
| Control Interface | RS485/USB (configurable address, baud rate 1200–9600 bps) |
| External Control | 5–24 V TTL-level start/stop signal |
| Status Outputs | Run/Stop, Direction, Alarm |
| Leak Detection | Optional visual and audible alarm |
| Calibration Modes | Volumetric and flow-based |
| Density Compensation | Supported for mass-based dispensing |
| Real-time Adjustment | On-the-fly volume/flow fine-tuning during operation |
| Pause Function | Supported in both distribution and transfer modes |
| Display Guidance | Dynamic range validation for user-defined parameters |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Peristaltic Pump |
| Model | BT-300D |
| Flow Rate Range | 0.0063–1730 mL/min |
| Speed | 400 rpm |
| Control Interface | External TTL/DC (5–24 V) |
| Alarm Output | Visual & Audible Leak Detection (Optional) |
| Unit Mode | Volumetric (mL, µL) or Gravimetric (g, mg) via Density Input |
| Operation Modes | Dispensing, Transfer, Continuous, Timed, Volume-Based |
| Calibration | Multi-point Flow/Liquid Volume Calibration |
| Real-time Adjustment | Flow rate and dispense volume adjustable during operation |
| Pause Function | Supported during dispensing or transfer |
| Status Outputs | Run/Stop, Direction, Fault Alarm |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Peristaltic Pump |
| Model | BT-600D |
| Flow Rate Range | 0.0063–2600 mL/min |
| Maximum Speed | 600 rpm |
| Control Interface | External TTL/DC (5–24 V), Digital Status Outputs (Start/Stop, Direction, Alarm) |
| Calibration Options | Volumetric, Gravimetric, and Flow-Based |
| Leak Detection | Optional Visual/Audible Alert |
| Operating Modes | Distribution, Continuous Transfer, Timed Dispense, Volume-Based Dispense |
| Real-Time Adjustment | On-the-fly flow rate and dispense volume modulation |
| Unit Flexibility | Volume (mL, µL) or Mass (g) input with density compensation |
| Parameter Guidance | Dynamic range validation feedback during setup |
| Pause Functionality | Full operational pause/resume during active dispensing or transfer |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | BT100-2 |
| Flow Rate Range | 2 × (0.3–5000) mL/h |
| Max Output Pressure | ≥2.5 kg/cm² |
| Dimensions (W×D×H) | 120×250×120 mm |
| Display | Dual-channel digital RPM/flow rate readout |
| Power Supply | AC 220 V, 50 Hz |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Model | BT100-4 |
| Dimensions (W×D×H) | 120×270×120 mm |
| Channels | 4 independent motor-driven channels with digital RPM display |
| Flow Rate per Channel | 0.3–5000 mL/h |
| Maximum Back Pressure | ≥2.5 kg/cm² |
| Power Supply | AC 220 V ±10%, 50/60 Hz |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BT100-8 |
| Dimensions (W×D×H) | 120 × 310 × 120 mm |
| Channels | 8 independent channels with digital RPM display |
| Flow Rate per Channel | 0.3–5000 mL/h |
| Minimum Flow Resolution | 0.1 mL/h |
| Maximum Pressure | ≥2.5 kg/cm² (≈245 kPa) |
| Power Supply | AC 220 V ±10%, 50/60 Hz |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China) |
| Model | BT100L + YZ15 |
| Power Supply | AC 220 V ±10%, 50/60 Hz |
| Max. Power Consumption | <40 W |
| Dimensions (L×W×H) | 223 × 150 × 195 mm |
| Weight | 4.8 kg |
| Operating Temperature | 0–40 °C |
| Relative Humidity | <80% |
| Display | 65,535-color TFT LCD with capacitive touchscreen |
| Speed Range | 0.1–150 rpm |
| Speed Resolution | 0.1 rpm |
| Speed Accuracy | ±0.2% |
| Flow Range (with YZ15) | 0.006–575 mL/min |
| Flow Control Mode | Direct flow setting with calibration capability |
| External Control | Isolated TTL (5/12/24 V), 0–5 V / 0–10 V / 4–20 mA / 0–10 kHz analog inputs |
| Compliance | CE-marked design |