Peristaltic Pump
Filter
Showing 91–120 of 198 results
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HL-6 |
| Dimensions (W×D×H) | 240×180×170 mm |
| Channel Count | 1 |
| Flow Rate Range | 2000–150,000 mL/h |
| Maximum Back Pressure | ≥2 kg/cm² |
| Control Interface | Microprocessor-Based Speed Display & Memory |
| Speed Adjustment | Wide-Range Analog/Digital Input |
| Compliance | Designed for industrial fluid handling per ISO 8573-1 (compressed air purity) and IEC 61000-6-2/6-4 (EMC immunity/emission) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HL-6B |
| Flow Rate Range | 2000–150,000 mL/h |
| Maximum Back Pressure | ≥2 kg/cm² |
| Dimensions (W×D×H) | 240 × 280 × 170 mm |
| Display | Digital LED Speed Readout |
| Control Mode | Manual Speed Adjustment with Memory Function |
| Timing Capability | None (HL-6B variant) |
| Channel Count | Single |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HL-6D |
| Price | USD 940 (FOB Shanghai) |
| Dimensions | 240 × 280 × 170 mm |
| Flow Rate | 2,000–150,000 mL/h |
| Maximum Back Pressure | ≥2 kg/cm² (≈196 kPa) |
| Speed Display | Digital RPM readout |
| Timer Range | 1 second to 100 minutes (start/stop & total run time) |
| Stop Delay | 1 second to 100 minutes |
| Operating Modes | Continuous, Timed Run, Volume Dispensing (Fill Mode), Memory Recall for Last Settings |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-11507 |
| Flow Rate | 58–1152 mL/min |
| Speed Range | 300–6000 rpm |
| Precision (CV) | <1% |
| Max Differential Pressure | 40 bar (at 1 mPa·s), 80 bar (≥16 mPa·s) |
| Viscosity Range | 0.3–5,000 mPa·s (up to 10,000 mPa·s with optional configuration) |
| Displacement per Revolution | 192 µL |
| Minimum Dose Volume | 100 µL |
| Motor | 3-phase AC, 250 W, IEC 063, IP55, 240/400 V, 50 Hz |
| Wetted Materials | SS 316L (1.4435), Tungsten Carbide, Alloy C276 (2.4819), Graphite-Reinforced PTFE, FPM (optional EPDM/FFPM) |
| Connection | 3/8" NPT female (lateral option available) |
| Dimensions (L×W×H) | 358 × 120 × 224 mm |
| Weight | ~22 kg |
| Ambient Temp | −20 to +40 °C (−55 to +60 °C with options) |
| Operating Temp | −5 to +40 °C (−20 to +120 °C with options) |
| ATEX Certification | II 2G c T4 X (Zone 1 & 2) |
| Thermal Protection | 6-piece PTC thermistor array |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-11507 |
| Flow Rate | 29–1152 mL/min |
| Speed Range | 150–6000 rpm |
| Viscosity Range | 0.3–150,000 mPa·s |
| Precision (CV) | <1% |
| Displacement | 192 µL |
| Minimum Dose | 100 µL |
| Pressure Differential | 0–40 bar (at 1 mPa·s), up to 140 bar (≥16 mPa·s) |
| Max Inlet Pressure | 10 bar |
| Wetted Materials | SS 316L, Tungsten Carbide, Alloy C276, Graphite-Enhanced PTFE, FPM |
| Motor | 3-phase AC, 240/400 V, 100 Hz, 240 W, IP55, IEC 056, 4-pole |
| Dimensions (L×W×H) | 303×110×171 mm |
| Weight | 9.3 kg |
| Ambient Temp | −5 to +40 °C |
| Fluid Temp | −5 to +60 °C (−20 to +120 °C with optional heating/insulation) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-11558 |
| Flow Rate | 0.19–1152 mL/min |
| Speed Range | 1–6000 rpm |
| Precision (CV) | <1% |
| Max Differential Pressure | 60 bar |
| Max Operating Temperature | −5 to +40 °C (up to +100 °C with optional components) |
| Displacement per Revolution | 192 µL |
| Minimum Dose | 100 µL |
| Motor | Brushless DC, 42 V DC, IP54, 368 W |
| Encoder Resolution | 500 pulses/rev |
| Wetted Materials | Alloy C22 (DIN 2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® Spectrum™ 6375) |
| Fluid Connections | 3/8" NPT internal thread |
| Dimensions (L×W×H) | 301 × 130 × 129 mm |
| Weight | ~11 kg |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2505 |
| Flow Rate Range | 0.0015–9 mL/min |
| Speed Range | 1–6000 rpm |
| Precision (CV) | <1% |
| Viscosity Range | 0.3–25,000 mPa·s |
| Displacement per Revolution | 1.5 µL |
| Minimum Dose | 0.25 µL |
| Pressure Differential | up to 15 bar (oil, 16 mPa·s) |
| Wetted Materials | SS 316L, tungsten carbide, graphite-reinforced PTFE, FPM seals |
| Motor | 24 V DC servo motor, 44 W |
| Controller | Integrated 16-bit microcontroller |
| Dimensions (L×W×H) | 140 × 45 × 65 mm |
| Weight | ~780 g |
| Operating Temperature | −5 to +60 °C (extended range −20 to +150 °C with optional configuration) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2509 Ex |
| Flow Rate | 0.0015–7 mL/min |
| Speed Range | 1–4700 rpm |
| Viscosity Range | 0.3–5000 mPa·s |
| Precision (CV) | <1% |
| Displacement | 1.5 µL |
| Minimum Dose | 0.25 µL |
| Max. Differential Pressure | 0–5 bar (≥16 mPa·s) |
| Max. Inlet Pressure | 5 bar (10 bar with optional fluid seal module) |
| Wetted Materials | SS 316L, tungsten carbide, Ni-based alloy, graphite-reinforced PTFE, FPM (FKM), optional EPDM/FFPM |
| Motor | 24 V DC, 2 A, 53 W, encoder 500 ppr (HEDL 5540) |
| Cable Length | 10 m |
| Weight | ~2700 g |
| ATEX Certification | II 2G c T5 X |
| Installation Zone | Zone 1 & 2 |
| Operating Temperature | −5 to +40 °C |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2542 |
| Flow Rate | 0.15–9 mL/min |
| Speed Range | 100–6000 rpm |
| Precision (CV) | <1% |
| Displacement | 1.5 µL |
| Minimum Dose | 0.25 µL |
| Max Differential Pressure | 1.5 bar |
| Max Inlet Pressure | 1 bar |
| Operating Temperature | −20 to +60 °C |
| Motor | 24 V DC, 4.5 W, integrated 32-pulse magnetic encoder |
| Dimensions (L × Ø) | 90 mm × 16 mm |
| Weight | 70 g |
| Wetted Materials | Alloy C22 (2.4602), Alloy C276, ZrO₂ ceramic, WC, PEEK™, FFPM, graphite-reinforced PTFE |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2905 |
| Flow Rate Range | 0.003–18 mL/min |
| Speed Range | 1–6000 rpm |
| Precision (CV) | <1% |
| Viscosity Range | 0.3–50,000 mPa·s |
| Pressure Differential | up to 30 bar (oil, 16 mPa·s) |
| Displacement per Revolution | 3 µL |
| Minimum Dose | 0.5 µL |
| Wetted Materials | SS 316L, tungsten carbide, graphite-reinforced PTFE, FPM seals |
| Motor | 24 V DC servo motor, 44 W |
| Controller | Integrated 16-bit microcontroller |
| Interfaces | 0–10 V analog, RS-232, 1 digital I/O |
| Dimensions (L×W×H) | 140 × 45 × 65 mm |
| Weight | ~780 g |
| Operating Temperature | –5 to +60 °C (optional –20 to +150 °C) |
| Fluid Connections | 1/4"–28 UNF front port |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2909 Ex |
| Flow Rate | 0.003–14 mL/min |
| Speed Range | 1–4700 rpm |
| Precision (CV) | < 1 % |
| Viscosity Range | 0.3–5000 mPa·s |
| Displacement | 3 µL |
| Minimum Dose | 0.5 µL |
| Max. Differential Pressure | 4 bar (at 1 mPa·s), 5 bar (≥16 mPa·s) |
| Max. Inlet Pressure | 5 bar (10 bar with optional fluid seal module) |
| Wetted Materials | SS 316L (1.4404/1.4435), tungsten carbide, Ni-based alloys |
| Shaft Seal | graphite-reinforced PTFE + SS 316L |
| Static Seals | FPM (standard), EPDM/FFPM optional |
| Motor | 24 V DC, 2 A, 53 W, encoder 500 ppr (HEDL 5540) |
| Cable Length | 10 m |
| Weight | ~2700 g |
| ATEX Certification | II 2G c T5 X |
| Hazardous Area Classification | Zone 1 & 2 |
| Operating Temperature | −5 to +40 °C |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2921 |
| Flow Rate | 0.3–18 mL/min |
| Speed Range | 100–6000 rpm |
| Precision (CV) | <1% |
| Displacement | 3 µL |
| Minimum Dose | 0.5 µL |
| Max Differential Pressure | 3 bar |
| Inlet Pressure Limit | 1 bar |
| Operating Temperature | −20 to +60 °C |
| Weight | ~56 g |
| Motor | Brushed DC, 18 V, Hall-effect encoder (16 pulses/rev) |
| Communication | RS-232, CANopen (DSP 301/DSP 402) |
| Wetted Materials | SS 316L, ceramic, tungsten carbide, nickel-based alloy, epoxy |
| Shaft Seal | graphite-reinforced PTFE/SS 316L |
| Static Seals | FPM (optional EPDM/FFPM) |
| Tubing Connection | 2 mm OD slip-fit (optional manifold M2.1) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-4605 |
| Flow Rate Range | 0.012–72 mL/min |
| Viscosity Range | 0.3–50,000 mPa·s |
| Precision (CV) | <1% |
| Speed Range | 1–6000 rpm |
| Displacement per Revolution | 12 µL |
| Minimum Dose Volume | 2 µL |
| Pressure Differential | 0–10 bar (water, 1 mPa·s), up to 50 bar (oil, 16 mPa·s) |
| Max. Inlet Pressure | 5 bar (10–40 bar with optional configuration) |
| Fluid Path Materials | SS 316L (1.4404 / 1.4435), tungsten carbide, Ni-based alloys |
| Seals | Graphite-reinforced PTFE, FPM (standard), EPDM/FFPM (optional) |
| Motor | 24 V DC servo motor, 44 W |
| Controller | Integrated 16-bit microcontroller |
| Interfaces | 0–10 V analog, RS-232, 1 digital I/O |
| Dimensions (L×W×H) | 143 × 45 × 65 mm |
| Weight | ~800 g |
| Operating Temperature | −5 to +60 °C (−20 to +150 °C with optional configuration) |
| Connection | Frontal 1/4″–28 UNF |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-4609 Ex |
| Flow Rate | 0.012–56 mL/min |
| Speed Range | 1–4700 rpm |
| Viscosity Range | 0.3–5,000 mPa·s |
| Precision (CV) | <1% |
| Max Differential Pressure | 0–10 bar (≥16 mPa·s) |
| Inlet Pressure Max | 5 bar (10 bar with optional fluid seal module) |
| Displacement per Revolution | 12 µL |
| Minimum Dose Volume | 2 µL |
| Motor | 24 V DC, 53 W, encoder resolution 500 pulses/rev |
| Wetted Materials | SS 316L (1.4404/1.4435), tungsten carbide, Ni-based alloys |
| Shaft Seal | graphite-reinforced PTFE + SS 316L |
| Static Seals | FPM (standard), EPDM/FFPM optional |
| Enclosure Rating | ATEX II 2G c T5 X |
| Operating Temperature | −5 to +40 °C |
| Ambient Temperature | 0 to +40 °C |
| Weight | ~2700 g |
| Cable Length | 10 m |
| Brand | HNPM |
|---|---|
| Origin | UK |
| Model | MZR-6355 |
| Flow Rate | 0.024–144 mL/min |
| Speed Range | 1–6000 rpm |
| Precision | CV < 1% |
| Max Pressure | 80 bar |
| Displacement | 24 µL |
| Min Dose | 15 µL |
| Dimensions | 146 × 70 × 72 mm |
| Weight | ~1650 g |
| Operating Temp | −5 to +60 °C (−20 to +150 °C with optional thermal module) |
| Wetted Materials | Alloy C22 (DIN 2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® 6375) |
| Motor | 24 V DC, 44 W, Brushless DC Servo with Encoder & Microcontroller |
| Interfaces | 0–10 V, 0(4)–20 mA, RS-232, 1x Digital I/O, Optional CAN Bus |
| Drive | 8-pole NdFeB Magnetic Coupling |
| Viscosity Range | 0.3–1000 mPa·s |
| Fluid Connection | 1/8" NPT Female |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-6359 Ex |
| Flow Rate | 0.024–112 mL/min |
| Speed Range | 1–4700 rpm |
| Max Differential Pressure | 0–40 bar (at η > 16 mPa·s) |
| Precision | CV < 1% |
| Motor | 24 V DC, 53 W, encoder 500 ppr |
| Explosion Protection | ATEX II 2G IIC c T4 X |
| Wetted Materials | Alloy C22 (DIN 2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® 6375) |
| Connection | 1/8" NPT internal thread |
| Weight | ~4900 g |
| Dimensions | 280 mm (L) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7209 Ex |
| Flow Rate | 0.048 – 225 mL/min |
| Speed Range | 1 – 4700 rpm |
| Precision (CV) | < 1 % |
| Viscosity Range | 0.3 – 5,000 mPa·s |
| Max Differential Pressure | 30 bar (at 1 mPa·s), 40 bar (≥16 mPa·s) |
| Max Inlet Pressure | 5 bar (10 bar with optional fluid seal module) |
| Displacement per Revolution | 48 µL |
| Minimum Dose Volume | 30 µL |
| Motor | 24 V DC, 2 A, 53 W, Encoder Resolution: 500 pulses/rev |
| Wetted Materials | SS 316L (1.4404 / 1.4435), Tungsten Carbide, Ni-based alloys |
| Shaft Seal | Graphite-reinforced PTFE + SS 316L |
| Static Seals | FPM (Viton), optional EPDM or FFPM |
| Enclosure Rating | ATEX II 2G c T4 X |
| Ambient Temp | 0 – 40 °C |
| Operating Temp | −5 – +40 °C |
| Weight | ~2700 g |
| Cable Length | 10 m |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-4622 |
| Flow Rate | 1.2–72 mL/min |
| Speed Range | 100–6000 rpm |
| Precision (CV) | <1% |
| Displacement | 12 µL |
| Minimum Dose | 2 µL |
| Max. Differential Pressure | 5 bar |
| Inlet Pressure Limit | 1 bar |
| Operating Temperature | −20 to +60 °C |
| Wetted Materials | SS316L, Ceramic, Tungsten Carbide, Ni-based Alloy, Epoxy |
| Shaft Seal | Graphite-Reinforced PTFE |
| Static Seals | FPM (optional EPDM/FFPM) |
| Motor | Brushed DC, 24 V, 4.5 W, Hall-effect Encoder (32 ppr) |
| Dimensions | Ø16 mm × 88 mm |
| Weight | ~100 g |
| Fluid Connection | 2 mm OD sliding fitting (optional M2.1 manifold) |
| Brand | Interscience |
|---|---|
| Origin | France |
| Model | FlexiPump |
| Construction | 304L Stainless Steel Housing |
| Dispensing Range | 50 µL to 99 L per cycle |
| Tube ID | 3.2 mm |
| Accuracy | ±1.8% at 9 mL, ±1.0% at 18 mL, ±0.5% at 225 mL |
| Dispensing Modes | Continuous, Single-Dispense, Multi-Dispense (up to 32 programmable protocols) |
| Inter-Dispense Interval | 0.1–99.9 s adjustable |
| Max Flow Rate | 1.25 L/min (single Watson Marlow™ pump head) |
| Pump Head Speed | 10–550 rpm |
| Tubing Material | Tygon™ (pump head), Silicone (interconnect) |
| Power Supply | 100–240 V∼, 50–60 Hz |
| Power Consumption | 50 W |
| IP Rating | IP31 |
| Compliance | ISO 7218, ISO 6887, FDA BAM |
| Warranty | 1 year (registration required) |
| Spare Parts Availability | ≥10 years |
| Dimensions (W×D×H) | 16.1 × 27.3 × 20.8 cm |
| Net Weight | 5.40 kg |
| Brand | Interscience |
|---|---|
| Origin | France |
| Model | FlexiPump Pro |
| Construction | 304L stainless steel housing |
| Pump Head Type | Dual Watson Marlow™ peristaltic pump heads |
| Tubing ID Options | 3.2 mm and 6.4 mm |
| Dispensing Range | 50 µL to 99 L per cycle |
| Accuracy (3.2 mm tubing) | ±0.9% at 9 mL, ±0.5% at 18 mL, ±0.4% at 225 mL |
| Flow Rate | 3 mL/min to 2.5 L/min |
| Speed Range | 10–550 rpm |
| Dispense Modes | Continuous, Single, Multi-step (programmable intervals from 0.1–99.9 s) |
| Programmable Protocols | 32 user-defined methods |
| Traceability | Operator ID, timestamp, calibration date, speed, tubing ID, volume, mode — exportable via USB-A (printer/U-disk) or USB-B (PC) as CSV |
| Compliance | ISO 7218, ISO 6887, FDA BAM |
| IP Rating | IP31 |
| Power Supply | 100–240 V∼, 50–60 Hz |
| Power Consumption | 60 W |
| Warranty | 1 year (registration required) |
| Spare Parts Availability | Guaranteed for 10 years |
| Dimensions (FlexiPump only) | 16.1 × 33.2 × 20.8 cm |
| Weight (FlexiPump only) | 5.55 kg |
| Certifications | CE, RoHS |
| Brand | Interscience |
|---|---|
| Origin | France |
| Model | FlexiPump Scale |
| Construction | Full 304L stainless steel |
| Pump Type | Dual-head peristaltic (Watson Marlow™ low-pulse) |
| Flow Rate | Up to 6 L/min (with Jumbo kit) |
| Dispensing Range (volumetric) | 50 µL – 99 L |
| Dispensing Range (gravimetric) | 1 mL – 6.5 L |
| Weighing Capacity | 0.1 – 6,500 g |
| Weighing Resolution (≤200 g) | 0.01 g |
| Weighing Accuracy | ±0.05 g (0–100 g), ±0.05% (100–6,500 g) |
| Tubing ID | 3.2 mm (standard), compatible with 6.4 mm |
| Dispensing Precision (3.2 mm tubing) | ±0.9% (9 mL), ±0.5% (18 mL), ±0.4% (225 mL) |
| Gravimetric Mode Accuracy | ±0–1% (Precise mode), ±0–2% (Fast/Normal mode, per dispense) |
| Programmable Methods | 32 |
| Interval Time (multi-dispense) | 0.1–99.9 s |
| Max Throughput | 40 × 9 mL tubes/min, 29 × 18 mL Petri dishes/min, 8 × 220 mL sample bags/min |
| Motor Speed | 10–550 rpm |
| Connectivity | 2× USB-A (printer/U-disk), 1× USB-B (PC), 3.5 mm jack, load cell interface |
| Power | 100–240 V~, 50–60 Hz, 70 W |
| IP Rating | IP31 |
| Compliance | ISO 7218, ISO 6887, FDA BAM |
| Warranty | 1 year (registration required) |
| Spare Parts Availability | 10 years |
| Standard Accessories | Dual Watson Marlow™ pump heads, weighing platform (Ø17 cm × 5.4 cm), 3.2 mm & 6.4 mm dispensing kits (nozzles, GL45 adapters, filters, tubing, tube anchors), power & USB cables, user manual, certificate of conformity, free homogenization bags |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Model | MASTERFLEX ISMATEC REGLO |
| Pump Type | Digital Positive-Displacement Piston Pump |
| Display | 5" (12.7 cm) Capacitive TFT/RGB Touchscreen |
| Operating Modes | Continuous, Volumetric Dispensing, Timed Dispensing |
| Flow Control | Adjustable Speed, Drip Prevention |
| Pump Head Design | Valveless Plunger-Type (PH00) |
| Maintenance | Single-Moving-Part Architecture |
| User Access Levels | Three-Tier Authentication (Operator, Supervisor, Administrator) |
| Software Integration | MasterflexLive® Cloud Monitoring Platform |
| Compliance Context | Designed for GLP/GMP-aligned lab environments |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Model | ISMATEC® REGLO-IP |
| Drive Type | Digital Planetary Gear Motor with Stainless Steel Rotors |
| Channels | 16 |
| Power Supply | 230 VAC, 60 Hz |
| Display | 5" Capacitive TFT/RGB Touchscreen (12.7 cm) |
| Control Interface | Touchscreen + Analog/TTL External Signal Input |
| Operating Modes | Continuous, Metered Dispensing, Timed Dispensing |
| Programmable Parameters | Flow Rate, Volume, Time, Interval/Off-Time, Speed Ramp |
| User Access Levels | Three-Tier Authentication (Operator, Supervisor, Administrator) |
| Pump Head Compatibility | Micropump A- and B-Series Gear Pump Heads |
| Flow Range | 1.7–4680 mL/min (per channel, dependent on tubing and pump head) |
| Tube Life Optimization | Auto-engagement cartridge housing with consistent occlusion pressure |
| Compliance | Designed for GLP/GMP environments |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Product Type | Peristaltic Pump Accessory |
| Compatible Drive System | ISMATEC® REGLO-IPC / IPC-N Series |
| Channel Count | 4 |
| Input Voltage | 230 VAC, 60 Hz |
| Mounting Type | Adjustable Clamp for Tubing Retention |
| Material | Stainless Steel Housing with Precision-Machined Polymer Components |
| Compliance | CE, RoHS, UL Recognized (per system integration) |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MASTERFLEX ISMATEC REGLO-IPC |
| Instrument Type | Peristaltic Pump |
| Power Supply | 230 VAC, 60 Hz |
| Channel Count | 24 |
| Drive Mechanism | Planetary Gear Motor with 8 Stainless Steel Rotors |
| Display | 5" Capacitive TFT/RGB Touchscreen (12.7 cm), or 4-Digit LED (IPC/IPC-N variant) |
| Control Interface | Touchscreen, 6-Key Keypad, Analog Voltage (0–10 V), TTL Digital Signals |
| Operating Modes | Continuous, Dispense-by-Volume, Dispense-by-Time (with programmable interval/off-time) |
| User Access Levels | Three-Tier Permission System |
| Pump Head Compatibility | Micropump A-Series and B-Series Gear Pump Heads |
| Flow Range | 1.7–4680 mL/min (per channel, dependent on tubing size and pump head) |
| Tube Clamp | Adjustable, Tool-Free Snap-In Cartridge Design |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Pump Type | Digital Multi-Channel Peristaltic Pump |
| Compatible Pump Heads | Micropump A- and B-Series |
| Flow Range | 1.7–4680 mL/min |
| Drive Mechanism | Planetary Gear Motor with 8 Stainless Steel Rotors |
| Control Interface | 5" Capacitive TFT/RGB Touchscreen (12.7 cm) + 6-Key Keypad + Analog/TTL External Input |
| Operating Modes | Continuous, Dispense-by-Volume, Dispense-by-Time (with configurable interval/off-time) |
| Program Storage | User-Saved Dispense Protocols |
| Flow Stability | Optimized via Low-Pulsation Planetary Drive Architecture |
| Tube Life Extension | Enabled by Precise Roller Compression Control & Consistent Occlusion Geometry |
| User Access Levels | Three-Tier Password-Protected Authorization (Operator, Supervisor, Administrator) |
| Compliance | Designed for GLP/GMP Environments |
| Power Supply | 230 VAC, 60 Hz |
| Brand | J-KEM |
|---|---|
| Origin | USA |
| Model | SYR-1200 Series |
| Pump Type | Syringe Pump |
| Flow Rate Range | 0.5 µL/min to 200 mL/min |
| Syringe Compatibility | 25 µL – 50 mL |
| Number of Channels | 1 or 2 (expandable to 32 via system integration) |
| Dispensing Ports per Manifold | 3–8 |
| Tubing Material | PTFE and Borosilicate Glass |
| Tubing Diameter Options | 1/16" or 1/8" OD |
| Control Interface | PC-based Kem-Pump Software (Windows-compatible) |
| System Architecture | Closed, chemically inert fluid path |
| Brand | Jiapeng |
|---|---|
| Origin | Shanghai, China |
| Model | BT-100SD |
| Pump Head Type | YZ15 |
| Flow Rate Range | 1–14,500 mL/h |
| Speed Range | 0.1–150 rpm (adjustable in 0.1 rpm increments) |
| Pressure Rating | ≥3 kg/cm² |
| Tube Compatibility | Ø1×4 mm, Ø3×6 mm, Ø4.5×7 mm |
| Flow Accuracy | ±1% |
| Display | 4.5-inch HD capacitive touchscreen with real-time flow/speed/status visualization |
| Control Interface | USB port for PC software control |
| Timing Functions | Run timer (1 s–9 h 59 min 59 s), Sleep timer (1 s–9 h 59 min 59 s), Fill/Empty mode |
| Calibration Function | User-accessible flow calibration routine |
| Housing Material | Titanium-alloy core with 316 stainless steel rollers |
| Power Supply | AC 220 V, 50/60 Hz |
| Dimensions (W×D×H) | 330 × 170 × 170 mm |
| Weight | 3.56 kg |
| Brand | Jiapeng |
|---|---|
| Origin | Shanghai, China |
| Model | DHL-A |
| Pump Type | Dual-Channel Peristaltic Pump |
| Flow Rate Range | 2 × (0.6–900) mL/h |
| Speed Range | 0–65 rpm |
| Speed Resolution | 0.1 rpm |
| Maximum Pressure | ≥3 kg/cm² |
| Tube Compatibility | Ø1.2×3 mm, 3×5 mm |
| Quantitative Volume Range | 0.01–99990 mL |
| Flow Calibration Range | 1–300% |
| Power Supply | AC 220 V, 50/60 Hz |
| Dimensions (L×W×H) | 125×150×180 mm |
| Weight | 1.55 kg |
| Brand | Jiapeng |
|---|---|
| Origin | Shanghai, China |
| Model | HL-2B |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 2 × (0.5–900) mL/h |
| Speed Range | 0–65 rpm |
| Maximum Pressure | 3 kg/cm² |
| Display | Gold LED Digital Screen |
| Motor Type | Stepper Motor with Multi-Step Drive |
| Tubing Compatibility | 1.2×3 mm and 3×5 mm ID×OD silicone or Tygon® tubing |
| Power Supply | AC 220 V, 50/60 Hz |
| Dimensions (W×D×H) | 125×150×180 mm |
| Weight | 1.5 kg |
| Enclosure Material | ABS Plastic (Injection-Molded, Full-Enclosure Design) |
| Control Interface | Front-panel keypad + external TTL-compatible control port for integration with fraction collectors |