Physical Property Testing Instruments
Filter
Showing 3631–3660 of 4355 results
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | -65°C to +180°C |
| Thermal Transition Time | ≤15 s (typical between chambers) |
| Control System | TEMI880 Color Touchscreen Controller (English/Chinese Switchable) or TEMI300 Membrane Keypad Controller (English Only) |
| Refrigeration | Twin-Stage or Single-Stage Hermetic Compressor (Original Tecumseh or Copeland) |
| Insulation | Rigid Polyurethane Foam (≥100 mm) + Ultra-Fine Glass Fiber |
| Interior Material | SUS304 Stainless Steel |
| Exterior Finish | Electrostatic Powder-Coated Cold-Rolled Steel or Optional Brushed SUS304 |
| Air Circulation | Wide-Band Forced Convection with Centrifugal Blower |
| Compliance | ASTM D5229, MIL-STD-883 Method 1010, JESD22-A104, IEC 60068-2-14 |
| Brand | Senbe |
|---|---|
| Model | A650 |
| Type | Benchtop Energy-Dispersive X-ray Fluorescence (EDXRF) Spectrometer |
| Detector | Silicon Drift Detector (SDD), Resolution: 129 ± 5 eV |
| X-ray Tube | 50 W, 5–50 kV / 0–1000 µA |
| Measurable Elements | Na (11) to U (92) |
| Detection Limit | ppm-level |
| Quantification Range | 0.0001% – 99.99% (matrix-dependent) |
| Sample Form | Solid, Powder, Liquid |
| Vacuum Capability | Integrated Vacuum System for Light Element Enhancement (Mg, Al, Si, P, S) |
| Cooling | Peltier-based Electric Refrigeration |
| Safety | Triple-layer Radiation Shielding, Interlocked Sample Chamber, Real-time Beam Monitoring |
| Software | Proprietary EDXRF Analysis Suite with Fundamental Parameters (FP), Empirical Coefficient, and Matrix Correction Algorithms |
| Compliance | Designed to meet IEC 61000-6-3 (EMC), IEC 61000-6-4, and GB/T 18806–2002 (Chinese EDXRF Standard) |
| Brand | Senbe |
|---|---|
| Model | T300S |
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Detector | Si-Pin Semiconductor |
| Measurable Elements | S (16) to U (92) |
| X-ray Tube Voltage | 0–50 kV (intelligent programmable HV system) |
| Collimator | Standard Φ0.5 mm |
| Optical Magnification | 30× (industrial CCD camera) |
| Energy Resolution | ≤129 eV ±5 eV |
| Analysis Layers | Up to 5 simultaneous layers |
| Analyzable Elements per Measurement | Up to 24 |
| Algorithm | Fundamental Parameters (FP) method |
| Signal Processing | Digital Multi-Channel Analyzer (MCA) technology |
| Chamber Dimensions | 268 × 307 × 97 mm |
| Overall Dimensions | 414 × 416 × 362 mm |
| Safety Systems | Multi-dimensional thermal dissipation + dual interlock radiation shielding + real-time hardware status monitoring |
| Brand | Auniontech (Hao Liang Optoelectronics) |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model Designation | Gaussmeter / Teslameter |
| Pricing | Available Upon Request |
| Brand | SETARAM |
|---|---|
| Origin | France |
| Model | 96line TMA |
| Instrument Type | Thermomechanical Analyzer |
| Temperature Range | Ambient to 2100 °C |
| Displacement Range | ±2 mm |
| Maximum Force | 1.5 N (electromagnetically controlled) |
| Sample Dimensions | L = 50 mm, Ø = 18 mm (recommended Ø = 15 mm) |
| Displacement Resolution | 1.6 nm RMS |
| Displacement Noise | 10 nm RMS |
| Specific Noise | 0.2 × 10⁻⁶ |
| Probe Types | Al₂O₃ (up to 1750 °C), Graphite (≥1750 °C) |
| Probe Geometry | Spherical-tip compression probe |
| Brand | SETARAM |
|---|---|
| Origin | France |
| Model | Calvet Pro |
| Instrument Type | Reaction Calorimeter |
| Measurement Principle | 3D Calvet-type Heat-Flow Calorimetry |
| Sample Mass Range | mg-scale |
| Temperature Range | –120 °C to 830 °C |
| Pressure Capability | Up to 500 bar (with optional high-pressure module) |
| Vacuum Compatibility | Yes |
| Cp Accuracy | High-precision absolute heat capacity measurement |
| Operating Modes | Isothermal, Dynamic Scanning, and Stepwise Temperature Programs |
| Sensor Architecture | Symmetric 3D thermopile array surrounding the sample and reference positions |
| Calibration Method | Joule-effect electrical calibration |
| Sample Environment Control | Integrated pressure regulation, monitoring, and control |
| Brand | SETARAM |
|---|---|
| Origin | USA |
| Model | PCT Pro E&E |
| Instrument Type | Physical & Chemical Sorption Analyzer |
| Temperature Range | –269 °C to 500 °C |
| Pressure Range | Vacuum to 200 bar |
| Pressure Accuracy | ±1% FS |
| Detection Limit | 3 µg (equivalent to 0.3 wt% gas uptake on 1 mg sample) |
| Integrated Pressure Sensors | 4 (auto-switching dual-range) |
| Gas Compatibility | H₂, CO₂, CH₄, NH₃ |
| Sample Cell Options | 6 types (standard, high-temp, liquid, thin-film, cryogenic, micro-dosing) |
| Safety Systems | Combustible gas detection, multi-point T/P monitoring, inert-gas purged transfer pathway |
| Software Platform | LabVIEW-based with real-time data acquisition, automated sequence execution, and audit-trail-capable operation |
| Brand | Setaram |
|---|---|
| Origin | USA |
| Model | PCTPro-Evo |
| Temperature Range | –269 °C to 500 °C |
| Pressure Range | Vacuum to 200 bar |
| Pressure Accuracy | ±1% |
| Detection Limit | 3 µg (equivalent to 0.3 wt% gas uptake on 1 mg sample) |
| Gas Compatibility | H₂ only |
| Sensor Configuration | Four auto-switching pressure transducers with dual-range capability |
| Sample Cell Options | Six interchangeable cells (standard, high-temperature, liquid, thin-film, cryogenic, micro-dosing) |
| Safety Systems | Integrated combustible gas detection, multi-point temperature/pressure monitoring, inert-gas purged transfer pathway |
| Software Platform | LabVIEW-based real-time control and analysis suite |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | IPX9K |
| Temperature Range | 80 °C ±5 °C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Air Velocity Range | 5–18 m/s |
| Test Duration | 0–999 min |
| Flow Rate | 14–16 L/min |
| Water Pressure | 8,000–10,000 kPa |
| Water Temperature | Ambient to 80 °C ±5 °C |
| Turntable Speed | 5 ±1 r/min |
| Turntable Diameter | Φ400 mm |
| Turntable Load Capacity | ≤20 kg |
| Nozzle Positions | 0°, 30°, 60°, 90° (adjustable distance: 100–150 mm) |
| Chamber Interior | SUS304L stainless steel |
| Exterior | Powder-coated galvanized steel or optional 304 stainless steel |
| Control System | Programmable touchscreen controller with real-time flow/pressure/temperature display |
| Compliance | ISO 16750-1:2006, ISO 20653, IEC 60529, GMW 3172 (2007), VW 80106:2008, QC/T 417.1–2001, GB 4208 |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SD-225 |
| Temperature Range | -70 °C to +150 °C |
| Temperature Fluctuation & Uniformity | ≤ ±2 °C |
| Cooling Rate | 0.7–1 °C/min |
| Heating Rate | 1–3 °C/min |
| Temperature Control Accuracy | ±0.1 °C |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SD-225CS |
| Temperature Range | −70 °C to +150 °C |
| Temperature Fluctuation/Uniformity | ±0.5 °C / ≤2 °C |
| Cooling Rate | 0.7–1 °C/min |
| Heating Rate | 1–3 °C/min |
| Set/Indication Accuracy | ±0.1 °C |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SE-FB033 |
| Temperature Range | −40 °C to +80 °C |
| Temperature Uniformity & Stability | ≤ ±2 °C |
| Cooling Rate | 1 °C/min |
| Heating Rate | 3 °C/min |
| Temperature Resolution | 0.1 °C |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SE-GW-100 |
| Max Temperature | 150–200 °C |
| Type | Air Thermal Aging Chamber |
| Temperature Range | RT+10 °C to 200 °C |
| Temperature Uniformity | ±0.5 °C to ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C to ±1.0 °C |
| Temperature Deviation | ±1.5 °C to ±3.0 °C |
| Heating Rate | ≤40 min (from ambient +20 °C to 200 °C) / ≤60 min (alternative specification) |
| Cooling Rate | 0.7–1.0 °C/min |
| Air Exchange Rate | configurable (cycles/hour) |
| Interior Dimensions (W×H×D) | 450×450×500 mm |
| Construction | Interior – SUS304 stainless steel |
| Heating System | PID + SSR controlled resistive heating |
| Air Circulation | Forced horizontal airflow via multi-blade turbine fan with SETH-optimized duct design |
| Sealing | High-temperature silicone gasket |
| Safety Protections | Over-temperature cut-off, over-current auto-shutdown |
| Controller | PID microprocessor-based digital controller with dual PV/SV display and built-in timer |
| Optional | Tempered glass observation window |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SE-IPX9K |
| Temperature Range | +80 °C (operating water up to 90 °C) |
| Rain Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Air Velocity | 5–18 m/s |
| Test Duration | 0–999 min |
| Water Flow Rate | 14–16 L/min |
| Water Pressure | 8,000–10,000 kPa |
| Water Temperature | Ambient to 80 °C ±5 °C |
| Turntable Speed | 5 ±1 r/min |
| Turntable Diameter | Φ400 mm |
| Turntable Load Capacity | ≤20 kg |
| Nozzle Positions | 0°, 30°, 60°, 90° (adjustable distance: 100–150 mm) |
| Chamber Internal Dimensions | W800 × D800 × H800 mm (customizable) |
| Compliance | ISO 16750-1:2006, ISO 20653, IEC 60529 (IPX9K), GMW 3172 (2007), VW 80106:2008, QC/T 417.1–2001, GB 4208 |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SE-LX50F |
| Temperature Range | (RT + 10°C) to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed Range | 5–18 m/s |
| Test Duration | 0–999 min |
| Power Supply | 220 V / 50 Hz or 110 V / 60 Hz |
| Control System | PLC with Touchscreen Interface |
| Swivel Arm Angle Adjustment | ±20° to ±180° |
| Nozzle Orifice | 0.4 mm (optional 0.8 mm) |
| Water Pressure | 80–100 kPa |
| Turntable Diameter | 700 mm |
| Turntable Height Adjustment | 855–1300 mm |
| Max Load Capacity | 100 kg |
| Timer Range | 1–999 min |
| Weight | 150 kg |
| Compliance | IEC 60529, IEC 60598-1, IEC 60335-1, EN 60335-1, IEC 60950-1, GB 4208, GB 7000.1 |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SE-SC800B |
| Sand Composition | 97–99% SiO₂ (silicon dioxide) |
| Sand Blasting Concentration | 1.1 g/m³ ±0.25 g/m³ to 2.2 g/m³ ±0.5 g/m³ |
| Sand Blasting Air Velocity | 0–29 m/s |
| Dust Concentration | 0.1–10.6 g/m³ ±7 g/m³ |
| Dust Air Velocity | 8.9 m/s ±1.2 m/s |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SE-SCGJB500B |
| Sand Composition | 97–99% SiO₂ (quartz sand) |
| Sand Blasting Concentration | 1.1 g/m³ ±0.25 g/m³ to 2.2 g/m³ ±0.5 g/m³ |
| Sand Blasting Velocity | 0–29 m/s |
| Dust Blowing Concentration | 0.1–10.6 g/m³ ±7% |
| Dust Blowing Velocity | 8.9 m/s ±1.2 m/s |
| Temperature Range | 20–80 °C |
| Humidity Control | ≤30% RH |
| Sand Particle Size (blasting) | 150–850 µm |
| Dust Particle Size (blowing) | ≤149 µm |
| Airflow Regulation | Variable-frequency centrifugal fan |
| Test Standards | GJB 150.12A–2009, GJB 150.12–1986, GJB 360B–2009 Method 110 |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SED-408CS |
| Temperature Range | −40 °C to +150 °C |
| Temperature Uniformity & Stability | ≤ ±2 °C |
| Cooling Rate | 1 °C/min |
| Heating Rate | 3 °C/min |
| Temperature Control Resolution | 0.1 °C |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SET-B31 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −65 °C |
| Thermal Shock Range | −65 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 30 °C/min |
| Cooling Rate | 30 °C/min |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SET-K |
| Price | Upon Request |
| High-Temperature Range | +60 °C to +200 °C |
| Low-Temperature Range | +20 °C to −80 °C |
| Thermal Shock Range | +60 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 3.5 °C/min |
| Cooling Rate | 1.5 °C/min |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Salt Solution Temperature | 35 °C ±1 °C (NSS/ACSS) or 50 °C ±1 °C (CASS) |
| Salt Concentration | 5% NaCl (w/v) or 5% NaCl + 0.26 g/L CuCl₂·2H₂O (CASS) |
| Compressed Air Pressure | 1.00 ±0.01 kgf/cm² |
| Fog Collection Rate | 1.0–2.0 mL/80 cm²/h (measured over ≥16 h, arithmetic mean) |
| pH of Salt Solution | 6.5–7.2 (NSS) or 3.0–3.2 (CASS) |
| Internal Chamber Dimensions (W×D×H) | 90 × 60 × 50 cm |
| External Dimensions (W×D×H) | 141 × 88 × 128 cm |
| Temperature Range | −20 °C to 80 °C |
| Humidity Range | 20–98% RH |
| Temp. Resolution/Uniformity | ±0.1 °C / ±1.0 °C |
| RH Resolution/Uniformity | ±0.1% RH / ±3.0% RH |
| Temp. Control Accuracy/Stability | ±1.0 °C / ±0.5 °C |
| RH Control Accuracy/Stability | ±2.0% RH / ±2.0% RH |
| Pressure Tank Temp. | 47 °C ±1 °C (NSS/ACSS) or 63 °C ±1 °C (CASS) |
| Controller | Full-color LCD touch interface with real-time curve logging |
| Programmable Profiles | 140 patterns, 1400 steps, up to 99 repeats per pattern |
| Step Duration Range | 0–999 h 59 min |
| Brand | Shanda |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SD-L2 |
| Sample Capacity | Multi-sample simultaneous measurement |
| Instrument Type | Heat-Flow DSC |
| Temperature Range | −100 °C to 600 °C |
| Programmable Temperature Control | Heating, Isothermal, Cooling |
| Heating/Cooling Rate | 0.1–100 K/min |
| Scan Modes | Dynamic heating, dynamic cooling, isothermal hold |
| Temperature Accuracy | ±0.01 °C (typical, calibrated per ASTM E794 & ISO 11357-1) |
| Baseline Stability | <0.5 µW over 30 min at 50 °C |
| Sensor Resolution | 0.01 µW |
| Temperature Sensing | Dual independent platinum RTD sensors (furnace + sample) |
| Control Algorithm | Adaptive dynamic PID with FTC/STC dual-mode selection |
| Data Acquisition | 1–10 Hz user-selectable sampling rate |
| Communication Interface | USB 2.0 with auto-reconnect protocol |
| Atmosphere Control | Dual independent gas channels (N₂, O₂, Ar, air), software-switched via solenoid valves |
| Calibration Standards | Indium, Zinc, Tin, and Sapphire (per ISO 11357-2) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | SHH-400YD / SHH-250YD / SHH-150YD |
| Quotation | Available upon Request |
| External Dimensions (D×W×H, cm) | 91.5×72×173 / 67×71×146 / 66×63×121 |
| Internal Chamber Dimensions (D×W×H, cm) | 60×60×110 / 49×60×85 / 48×52×60 |
| Chamber Volume | 396 L / 250 L / 150 L |
| Temperature Range | +4–60 °C (SHH-150YD & SHH-250YD) |
| Humidity Range | 50–85 %RH |
| Humidity Uniformity | ±5 %RH |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±1.5 °C (at 25–40 °C) |
| Heating/Cooling Power | 2.5 kW / 2.0 kW / 1.5 kW |
| Brand | YDWG (Shanghai Physical Optics) |
|---|---|
| Origin | Shanghai, China |
| Model | SGW®X-4 |
| Temperature Range | Ambient to 360 °C |
| Heating Rate | Adjustable, up to 320 °C |
| Temperature Repeatability | ±1 °C (<200 °C), ±2 °C (≥200 °C) |
| Temperature Accuracy | ≤±1 °C (<200 °C) |
| Capillary Tube Length | 90 mm |
| Sample Capacity | 1 sample |
| Temperature Resolution | 1 °C |
| Display | LED digital readout (0.1 °C minimum increment) |
| Power Supply | 220 VAC, 50 Hz |
| Power Consumption | 80 W |
| Optical Configuration | Binocular stereomicroscope with 45° inclined dual eyetubes, adjustable interpupillary distance and right-eye diopter compensation |
| Total Magnification | 40× (4× objective + 10× eyepiece) |
| Working Distance | Optimized for thermal stage integration |
| Brand | YDWG |
|---|---|
| Origin | Shanghai, China |
| Model | SGW®X-4A |
| Temperature Range | Ambient to 360 °C |
| Heating Rate | 0.5–20 °C/min |
| Temperature Repeatability | ±1 °C (<200 °C), ±2 °C (≥200 °C) |
| Temperature Accuracy | ±0.5 °C |
| Capillary Dimensions | OD Φ1.4 mm, ID Φ0.9 mm |
| Sample Capacity | 3 samples |
| Temperature Resolution | 0.1 °C |
| Brand | YDWG |
|---|---|
| Origin | Shanghai, China |
| Model | SGW®X-5 |
| Temperature Range | Ambient to 360 °C |
| Heating Rate | 0.1–20 °C/min |
| Temperature Repeatability | ±1 °C (<200 °C), ±2 °C (≥200 °C) |
| Temperature Accuracy | ±0.5 °C (<200 °C), ±1 °C (≥200 °C) |
| Capillary Dimensions | OD 1.4 mm, ID 0.9 mm |
| Sample Capacity | 3 samples |
| Temperature Resolution | 0.1 °C |
| Brand | Yetuo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | CFJ-II |
| Principle | Vibration-based Sieving |
| Sieve Rotation Speed | 200 ± 5 rpm |
| Oscillation Amplitude | 60 mm |
| Counting Accuracy | ±0.5 revolutions (N = preset count) |
| Power Supply | 220 ± 10% V, 50 Hz |
| Power Consumption | 60 W |
| Dimensions (L×W×H) | 446 × 361 × 360 mm |
| Net Weight | 25 kg |
| Origin | China (manufactured in Shaoxing) |
|---|---|
| Supplier type | Authorized distributor |
| Import status | Domestic production with international-standard engineering |
| Price | USD 14,000–18,000 (FOB Shaoxing, subject to configuration) |
| Brand | Shashin Kagaku |
|---|---|
| Origin | Japan |
| Model | PV Cell Grid Line 3D Profilometer |
| Measurement Principle | White-Light Interferometry |
| Light Source Options | White LED (430–700 nm, >50,000 h), Tungsten-Halogen (400–900 nm, 10,000 h), Deuterium-Halogen (220–900 nm, 1,000 h) |
| Objective Lenses | 1× (FOV 6.6 × 8.8 mm, Optical Resolution 11 µm, Working Distance 15 mm), 5× (FOV 1.32 × 1.76 mm, Optical Resolution 2.3 µm, Working Distance 4 mm), 50× (FOV 0.132 × 0.176 mm, Optical Resolution 0.51 µm, Working Distance 3 mm) |
| Measurement Capabilities | Simultaneous 3D topography, line width (LW), line height (LH), sidewall angle, step height, roughness (Sa, Sq), and edge definition for metallized grid lines on silicon solar cells |
| Brand | SHASHIN KAGAKU |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | SQ-9000 |
| Pricing | Upon Request |
| Effective Measurement Range (X×Y×Z) | 700 × 900 × 60 mm |
| Maximum Workpiece Dimensions (X×Y×Z) | 1000 × 1250 × 60 mm |
| Maximum Workpiece Thickness | 60 mm |
| Minimum Readout Unit | 0.1 µm |
| XY Measurement Accuracy | U₁ = (3 + L/250) µm, U₂ = (4 + L/230) µm |
| Z-Axis Measurement Accuracy | (1.5 + 4L/1000) µm |