Physical Property Testing Instruments
Filter
Showing 2101–2130 of 4517 results
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | K100 |
| Pricing | Available Upon Request |
| Measurement Principle | Du Noüy Ring Method |
| Compliance | ASTM D971, ASTM D1331 |
| Measurement Range | 0–90 mN/m (dyne/cm) |
| Accuracy | ±0.25 mN/m |
| Standard Accessories | Platinum-Iridium Ring, Dual Stainless-Steel Torsion Wires, Analog Absolute-Value Scale |
| Operation Modes | Manual & Semi-Automatic |
| Drive System (Semi-Auto) | Reversible Synchronous Motor |
| Dual-Scale Dial | Upward/Downward Force Reading |
| Application Scope | Oil-Water Interfacial Tension, Surfactant Solution Characterization, Quality Control in Lubricants & Detergents |
| Brand | Krüss |
|---|---|
| Origin | Germany |
| Model | K20 |
| Maximum Load Capacity | 50 g |
| Resolution | 100 µg |
| Measurement Frequency | 5 Hz |
| Sample Stage Travel Distance | 90 mm |
| Sample Stage Speed | 2.4–14 mm/min |
| Temperature Control Range | –10 to 130 °C (with optional jacket) |
| Surface/Interfacial Tension Range | 1–999 mN/m |
| Tension Resolution | 0.01 mN/m |
| Liquid Density Range | 1–2200 kg/m³ |
| Density Resolution | 1 kg/m³ |
| Measurement Methods | Du Noüy Ring, Wilhelmy Plate, Rod, and Ring Detachment (ASTM D971) |
| Brand | Krüss |
|---|---|
| Origin | Germany |
| Model | MSA |
| Camera Interface | USB 3.0 |
| Max Frame Rate | 10 fps @ 1000 × 700 resolution |
| Illumination | Adjustable High-Power LED |
| Dispensing System | Dual- or Single-Needle Liquid Delivery |
| Dispensing Resolution | 0.1 µL |
| Contact Angle Range | 0–180° |
| Angular Resolution | 0.01° |
| Dimensions (W × D × H) | 106 mm × 59 mm × 112 mm |
| Weight | 0.85 kg |
| Surface Energy Calculation Methods | Owens-Wendt-Rabel-Kaelble, Wu, Zisman, Fowkes, van Oss & Good |
| Power Supply | USB-powered (no external adapter required) |
| Software | ADVANCE (Windows-based, GLP-compliant audit trail optional) |
| Brand | Krüss |
|---|---|
| Origin | Germany |
| Model | SDT |
| Measurement Range | 10⁻⁶ – 2000 mN/m |
| Resolution | 10⁻⁶ mN/m |
| Temperature Control Range | −10 °C to +180 °C |
| Camera Frame Rate | 15 fps |
| Capillary Rotation Resolution | 0.1 rpm |
| Sample Stage Tilt | ±20° |
| Illumination | High-power monochromatic LED with stroboscopic lighting |
| Software | ADVANCE Image Analysis Suite |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | −20 °C to 150 °C (model-dependent) |
| Humidity Range | 20–98% RH |
| Internal Dimensions | 40 cm (W) × 50 cm (H) × 40 cm (D) |
| External Dimensions | 100 cm (W) × 80 cm (H) × 105 cm (D) |
| Power Supply | AC 220 V, Single Phase |
| Compliance | GB/T 5170.18, GB/T 10586, GB/T 2423.22, IEC 60068-2-14 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Range | USD 14,000–22,000 (FOB) |
| Internal Dimensions (W×H×D) | 50×75×60 cm to 100×100×100 cm |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 %RH (optional: 5–98 %RH) |
| Rapid Thermal Ramp Rates | 5–25 °C/min (selectable) |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Uniformity | ±3.0 %RH (at ≥75 %RH) |
| Humidity Stability | ±2.5 %RH |
| Construction Material | AISI 304 Stainless Steel |
| Refrigeration System | Dual-stage cascade refrigeration with HFC-507/R23 eco-friendly refrigerants |
| Control Interface | 7-inch color TFT LCD touch controller with bilingual (English/Chinese) UI |
| Compliance Standards | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.3, GJB 150.4, GB/T 10589, GB/T 11158, GB/T 10592 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,500 (FOB, indicative only) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Rapid Ramp Rates | 5–25 °C/min (selectable) |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Uniformity | ±3.0% RH (at ≥75% RH) |
| Humidity Stability | ±2.5% RH |
| Internal Dimensions (W×H×D) | 50×75×60 cm to 100×100×100 cm |
| Test Port | Ø50 mm on left wall |
| Refrigerant | R507 / R23 (zero ODP, low GWP) |
| Control System | 7-inch color LCD touch interface with PID auto-tuning |
| Compliance Standards | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.3–150.4, GB/T 10589, GB/T 11158, GB/T 10592 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 2,650 (approx.) |
| Internal Dimensions (W×H×D, mm) | 500×600×500 to 1000×1000×1000 |
| External Dimensions (W×H×D, mm) | 1750×2250×2350 to 2350×2800×3000 |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range (optional) | 20–98 %RH |
| Rapid Temperature Transition Range | −45 °C to +85 °C |
| Transition Rate Options | 5–30 °C/min (A–F models, linear or non-linear programmable) |
| Temperature Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0 %RH |
| Temperature Control Accuracy | ±0.5 °C |
| Humidity Control Accuracy | ±2.5 %RH |
| Temperature Resolution | 0.1 °C |
| Humidity Resolution | 0.1 %RH |
| Refrigeration System | Water-cooled, dual-compressor (Tecumseh/Tecumseh or Bitzer) |
| Inner Chamber Material | SUS304 stainless steel |
| Outer Chamber Material | Stainless steel or SECC cold-rolled steel with epoxy powder coating |
| Insulation | High-density polyurethane foam (CFC-free) |
| Safety Protections | Over-temperature/over-humidity cutoff, high/low refrigerant pressure switch, compressor overload protection, fuse, water shortage alarm, fault diagnostic display |
| Power Supply | AC 380 V, 3-phase 5-wire, 50/60 Hz |
| Weight | 950–2300 kg |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 °C to +150 °C |
| Rapid Transition Range | -45 °C to +85 °C |
| Max Linear Ramp Rate | 15 °C/min |
| Adjustable Ramp Rate | 3–20 °C/min (linear/non-linear) |
| Humidity Range (optional) | 5–98% RH |
| Temperature Resolution/Accuracy | 0.1 °C / ±0.5 °C |
| Humidity Resolution/Accuracy | 0.1% RH / ±2.5% RH |
| Uniformity | ±2.0 °C / ±3.0% RH |
| Internal Construction | SUS304 Stainless Steel, Matte Finish |
| Insulation | High-Density Polyisocyanurate Foam |
| Cooling System | Air-Cooled or Water-Cooled |
| Compressor | Tecumseh (France) |
| Refrigerant | R-404A & R-501 (EPA-compliant) |
| Power Supply | AC 220 V, 1-Phase or AC 380 V, 3-Phase |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–32,000 (FOB) |
| Internal Dimensions (W×H×D, mm) | 500×600×500 to 1000×1000×1000 |
| External Dimensions (W×H×D, mm) | 1750×2250×2350 to 2350×2800×3000 |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range (optional) | 20–98 % RH |
| Rapid Transition Range | −45 °C to +85 °C |
| Transition Rate Options | 5–30 °C/min (linear or non-linear mode selectable) |
| Temperature Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0 % RH |
| Temperature Control Accuracy | ±0.5 °C |
| Humidity Control Accuracy | ±2.5 % RH |
| Temperature Resolution | 0.1 °C |
| Humidity Resolution | 0.1 % RH |
| Refrigeration System | Water-cooled |
| Compressor | Tecumseh (France) or Bitzer (Germany) |
| Inner Chamber Material | SUS 304 stainless steel |
| Outer Chamber Material | Cold-rolled steel with epoxy powder coating or stainless steel |
| Insulation | High-density polyurethane foam (CFC-free) |
| Power Supply | AC 380 V, 3-phase 5-wire, 50/60 Hz |
| Weight | 950–2300 kg |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range Options | A: −20°C to 150°C |
| B | −40°C to 150°C |
| C | −60°C to 150°C |
| D | −70°C to 150°C |
| Humidity Range | 20–98% RH (customizable) |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Deviation | +2 / −3% RH |
| Heating Rate | 1.0–3.0°C/min (customizable) |
| Cooling Rate | 2.0°C/min (customizable) |
| Internal Dimensions | 100 × 100 × 150 cm (W × D × H) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (FOB) |
| Internal Dimensions (W×H×D) | 500 × 750 × 600 mm |
| External Dimensions (W×H×D) | 1400 × 1870 × 1350 mm |
| Temperature Range | −40 °C to +150 °C |
| High-Temp Preheat Range | +60 °C to +200 °C |
| Low-Temp Precool Range | −55 °C to −10 °C |
| RT → +200 °C Ramp Time | ≈35 min |
| RT → −55 °C Ramp Time | ≈75 min |
| Temperature Uniformity | ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Thermal Shock Transition Time (Basket Transfer) | ≤10 s |
| Thermal Shock Recovery Time (−40 °C ↔ +150 °C) | ≤5 min |
| Dwell Time per Zone | ≥30 min |
| Heating Power (Hot Zone) | 3.5 kW |
| Cooling Power (Cold Zone) | 2.5 kW |
| Circulation Motor | 90 W |
| Inner Chamber Material | SUS#304 Stainless Steel |
| Insulation | Ceramic Fiber (Hot Zone), High-Density Polyurethane Foam (Cold Zone) |
| Compliance | GB/T 10592–2008, GB/T 10586–2012, GB/T 2423.1–2021, GB/T 2423.2–2021, GB/T 2423.3–2016, GB/T 2423.4–2016 |
| Key | Internal Chamber Dimensions: 40 × 35 × 30 cm |
|---|---|
| High-Temperature Zone Range | RT to +100 °C |
| Low-Temperature Zone Range | −40 °C to −10 °C |
| Thermal Shock Range | +100 °C / −40 °C |
| Ramp Rate (Heating) | ~15 min from RT to +100 °C |
| Ramp Rate (Cooling) | ~60 min from RT to −40 °C |
| Dwell Time per Cycle | 0.1–999.9 h |
| Cycle Count Programmable | 1–9999 |
| Recovery Time after Shock | ≤5 min |
| Max. Sample Mass | 1.5 kg |
| Construction | Exterior & Interior – SUS304 brushed stainless steel (interior mirror finish) |
| Refrigeration System | Dual-stage cascade refrigeration, water-cooled, hermetic or semi-hermetic compressors (EU/US origin) |
| Controller | Full-color LED touchscreen HMI with PID auto-tuning |
| Safety Protections | Overcurrent fuses, compressor overheat/overpressure/overcurrent protection, dry-heater alarm, chamber overtemperature alarm |
| Standard Accessories | One φ50 mm test port, two sample racks |
| Refrigerants | R404A / R23 (zero ODP, low GWP HFC blends) |
| Brand | Analysis |
|---|---|
| Country of Origin | Germany |
| Model | KSI V-700E |
| Instrument Type | Digital |
| Inspection Method | Pulse-Echo |
| Waveform | Pulsed Ultrasound |
| Maximum Scan Area | 700 mm × 1000 mm |
| Gain Range | 0–120 dB |
| Dynamic Range | ≥40 dB |
| Resolution | ≥32 dB |
| Transducer Configuration | Single-Crystal |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | V-400E |
| Detection Method | Pulse-Echo Mode |
| Waveform Type | Pulsed Ultrasound |
| Maximum Scan Speed | 2000 mm/s |
| Minimum Scan Area | 200 µm × 200 µm |
| RF Bandwidth | 500 MHz |
| Probe Configuration | Single Transducer (Standard) |
| Frequency Range (Optional Probes) | 100–2000 MHz |
| Axial Resolution (Typical) | <100 nm (with Nano-series transducers) |
| Integrated Optical Microscopy | Yes (Inverted & Epi-Illumination Configurable) |
| Compliance | ASTM E1783, ISO 16932, IPC-J-STD-035, JEDEC JESD22-A108 |
| Brand | KSV NIMA |
|---|---|
| Origin | Finland |
| Manufacturer | KSV NIMA (a brand of Biolin Scientific AB) |
| Product Category | Imported Instrument |
| Model | Microscopy Troughs |
| Price Range | USD 2,700 – 6,800 (FOB Helsinki) |
| Brand | KSV NIMA |
|---|---|
| Origin | Finland |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Category | Imported Instrument |
| Model | Roll-to-Roll |
| Price Range | USD 13,500 – 27,000 |
| Brand | KURASHIKI |
|---|---|
| Origin | Japan |
| Model | EST-58-450 |
| Type | 6-DOF Active Vibration Isolation Platform |
| Compliance | Cleanroom-Compatible (ISO Class 5–7), No Compressed Air Required |
| Control Interface | USB 2.0 |
| Display | Integrated LCD for Real-Time Acceleration Time-Waveform & FFT Spectrum |
| Leveling Mode | Motorized Auto-Leveling with Transport Lock Toggle |
| Construction | Sealed Anodized Aluminum Enclosure & Top Plate |
| Brand | KURASHIKI |
|---|---|
| Origin | Japan |
| Model | MINI560F |
| Type | 6-DOF Active Vibration Isolation Platform |
| Design | Compact Desktop Form Factor |
| Compliance | Cleanroom-Compatible (Sealed Aluminum Enclosure, No Compressed Air Required) |
| Control Interface | USB Communication with Real-Time Acceleration Time-Waveform & FFT Spectrum Display |
| Operation Modes | Auto-Leveling Mode / Transport Lock Mode |
| Typical Applications | Atomic Force Microscopy (AFM), Scanning Probe Microscopy (SPM), Laser Confocal Microscopy, Microhardness Testers, Interferometers |
| Brand | HeatWave Labs |
|---|---|
| Origin | USA |
| Model | LaB6 |
| Operating Temperature | 950–1200 °C |
| Emission Current Density | ≥3–5 A/cm² (CW), >15 A/cm² (pulsed) |
| Cathode Material | Lanthanum Hexaboride (LaB6) |
| Insulation | Alumina (Al₂O₃) |
| Structural Body | Molybdenum (Mo) |
| Lifetime | >10,000 hours under optimal vacuum and thermal conditions |
| Electrical Isolation | Dual independent power leads fully isolated from housing |
| Gas-Free Operation | Yes |
| Optional Coatings | Os/Ru (M-type), Os/W, IR-emission-enhancing coatings |
| Scan Configurations Available | 311, 532, 411, 612, M (customizable per request) |
| Brand | LabCompanion |
|---|---|
| Model | LC-800S |
| Temperature Range | -70°C to +150°C |
| Temperature Uniformity | ±0.5°C |
| Temperature Accuracy | ±0.3°C |
| Heating Rate (−70°C → +150°C) | ~60 min |
| Cooling Rate (+20°C → −70°C) | ~90 min |
| Internal Dimensions | 1000 × 1000 × 800 mm (W×D×H) |
| Construction | SUS304 Stainless Steel Interior |
| Control System | Korean-Made PID-Based Programmable Controller with LCD Interface |
| Power Supply | AC380V, 50 Hz |
| Compliance | GB/T 10592–2008, GB/T 2423.22–2012 |
| Brand | LabCompanion |
|---|---|
| Model | SH-60 / SH-90 / SH-110 / SH-130 / SH-160 / SH-200 |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (Guangdong Hongzhan Instrument Co., Ltd.) |
| Temperature Range | R.T. +10 °C to 55 °C |
| Test Temperatures | 35 °C ±1 °C (NSS), 50 °C ±1 °C (CASS) |
| Temp. Uniformity | ±2 °C |
| Temp. Stability | ±0.5 °C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Control Method | PID + PWM + SSR |
| Chamber Material | 8 mm PVC board with circumferential reinforcement |
| Saturated Air Tank | SUS#304 stainless steel |
| Heating Element | Stainless steel tubular heater |
| Chamber Cover | Transparent acrylic |
| Protection | Over-current breaker, chamber over-temp protection, saturated tank over-temp protection, low-water-level cutoff |
| Timer Range | 0–9999 h/min/sec (user-configurable) |
| Power Supply | 220 V/50 Hz or 380 V/50 Hz |
| Internal Volume | 100–1080 L |
| Compliance | ASTM B117, ISO 9227, JIS Z2371, CNS 12214 |
| Brand | Labman |
|---|---|
| Origin | Germany |
| Model | TIDAS |
| Measurement Principle | Hegman-type grind gauge imaging analysis |
| Sample Application | Liquid dispersions (paints, inks, coatings, slurries) |
| Plate Range Compatibility | 0–15 µm, 0–25 µm, 0–50 µm, 100 µm, 250 µm (custom plates available) |
| Imaging Resolution | High-definition digital capture |
| Analysis Time | ≤1 s per image |
| Total Cycle Time | ~15 s (including auto-coating) |
| Software Platform | Windows 7/8/10 native |
| Data Output | Histograms, particle size distribution profiles, pass/fail grading per ISO 1524 or ASTM D1316 |
| Compliance Support | Audit-trail ready, GLP/GMP-compatible metadata logging |
| Interface | USB 2.0 |
| System Lifespan | ≥12 years (field-validated) |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 50°C |
| Humidity Range | 85–98% RH |
| Temperature Uniformity | ≤2°C |
| Temperature Fluctuation | ±0.5°C |
| SO₂ Concentration Range | 0.1–1% v/v |
| Gas Delivery Method | Pressurized Cylinder System |
| Chamber Interior Material | PVC Plastic Sheet |
| Exterior Casing Material | Reinforced PVC Rigid Board |
| Viewing Window | Transparent Impact-Resistant Acrylic Lid |
| Sealing Method | Water-Tight Gasket Seal |
| Heating Method | Immersed Water-Bath Heater in Inner Tank |
| Standard Compliance | GB/T 9789–1988, DIN 50018, ISO 6988 (referenced) |
| Origin | Spain |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 050101 |
| Price | Upon Request |
| Max Load Capacity | 100 kN (configurable options: 10, 20, 30, 50, 100 kN) |
| Load Accuracy | ±2 N |
| Displacement Resolution | 0.01 mm |
| Crosshead Speed Range | 1–350 mm/min (adjustable) |
| Return Speed | 350 mm/min |
| Platen Dimensions | Up to 1500 × 1500 mm |
| Maximum Test Height | 1500 mm |
| Platen Parallelism | ±1 mm |
| Platen Flatness | <0.25 mm |
| Compliance Standards | DIN EN 22872, ISO 12048, TAPPI T804, UNE 57163/5, FEFCO No. 50, AFNOR H13-001 |
| Brand | Labthink |
|---|---|
| Origin | Shandong, China |
| Manufacturer | Labthink Co., Ltd. |
| Model | CHY-C2A |
| Load Range | 0–2 mm (standard), 0–6 mm / 0–12 mm (optional) |
| Resolution | 0.1 µm |
| Measurement Speed | 10 tests/min (adjustable) |
| Measuring Pressure | 17.5 ± 1 kPa (for films), 50 ± 1 kPa (for paper) |
| Contact Area | 50 mm² (films), 200 mm² (paper) |
| Power Supply | 220 VAC 50 Hz / 120 VAC 60 Hz |
| Dimensions | 461 × 334 × 357 mm (L×W×H) |
| Net Weight | 32 kg |
| Compliance | ISO 4593, ISO 534, ISO 3034, GB/T 6672, GB/T 451.3, GB/T 6547, ASTM D374, ASTM D1777, TAPPI T411, JIS K6250, JIS K6783, JIS Z1702, BS 3983, BS 4817 |
| Brand | Labthink |
|---|---|
| Model | MXD-02 |
| Application | Static & Kinetic COF Measurement for Urological Catheters, Guidewires, and Medical Tubing under Physiological Hydration Conditions |
| Temperature Control | 37 °C ± 0.5 °C (Water-Bath Immersion) |
| Load Range | 0–5 N |
| Accuracy Class | 0.5 |
| Slider Mass | 200 g (standard, silicone-coated) |
| Travel Distance | 70 mm / 150 mm |
| Test Speeds | 100 mm/min, 150 mm/min (adjustable) |
| Ambient Requirements | 23 ± 2 °C, 20–70 % RH |
| Compliance | Designed for ASTM F2624-22, ISO 8536-3, USP <1031>, and GLP-aligned validation protocols |
| Brand | Lake Shore |
|---|---|
| Origin | USA |
| Model | F71 (3-axis), F41 (1-axis) |
| Measurement Range | 35 mT to 35 T |
| DC Accuracy | ±0.15% of reading (standard probe, 350 mT–3.5 T range) |
| AC Bandwidth | 550 Hz (–3 dB), HF Mode: 20 Hz–7 kHz (–0.2%) |
| Resolution | < 0.1 µT |
| Probe Compatibility | FP-Series Hall Probes only |
| Compliance | Designed for GLP/GMP environments with audit-ready data logging capability |
| Brand | Lake Shore |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Product Origin | Imported |
| Model | SuperVariMag |
| Pricing | Upon Request |
| Brand | Lanjing |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Laboratory Laser Particle Size Analyzer |
| Measurement Range | 0.1 µm – 360 µm |
| Repeatability | Better than ±0.5% (NIST-traceable latex standard) |
| Optical Principle | Laser Diffraction with Full Mie Scattering Theory |
| Lens Aperture | Ø110 mm Fourier Transform Coated Lens |
| Laser Source | Imported High-Power Fiber-Coupled Semiconductor Laser, 635 nm |
| Detector Array | Uniform Cross-Distributed & Area-Compensated Multi-Axis Photodiode Array |
| Obscuration Range | 3% – 90% |
| Data Acquisition | 16-bit ADC, 200 kps Sampling Rate |
| Power Supply | External DC Adapter (No Internal AC Mains) |