Precision Geometric Measurement Instruments
Filter
Showing 211–240 of 245 results
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | UP Series |
| Product Type | Non-contact Profilometer / Roughness Analyzer |
| Working Principle | White-light Interferometry |
| Camera Resolution | 5 MP Auto-Focus CCD |
| Lateral Sampling Resolution | Adjustable down to 0.05 µm |
| Optical Contrast Modes | Brightfield, Darkfield, Optical DIC |
| Objective Compatibility | Long-working-distance telecentric objectives |
| Application Scope | Transparent thin films, high-aspect-ratio structures, steep slopes, reflectivity-agnostic surface topography |
| Stability | High mechanical and thermal stability |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | UP Series |
| Measurement Principle | White-Light Interferometry |
| Product Type | Non-Contact Profilometer / Surface Roughness Analyzer |
| Standard Stage | 150 × 150 mm motorized XY stage (optional 210 × 310 mm) |
| Vertical Range | Up to 100 mm |
| Tilt Stage | ±6° |
| XY Stage Resolution | 0.1 µm |
| Imaging Modes | White-Light Interferometry, Rotating-Disk Confocal Microscopy, Dark-Field Microscopy, Bright-Field Microscopy |
| Sensor Heads | Sigma Head (WLI only), Lambda Head (WLI + Confocal + Dark-Field + Bright-Field) |
| Automated Stitching Capability | Yes |
| Software Compliance | ASTM E1250, ISO 25178-2, ISO 4287, USP <1059>, FDA 21 CFR Part 11 audit trail support |
| Brand | Scantech |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Laser-Based 3D Scanner |
| Model | KSCAN-Magic |
| Measurement Speed | 4,150,000 measurements/sec |
| Scanning Accuracy | 0.020 mm |
| Resolution | 0.010 mm |
| Maximum Scan Area | 1440 mm × 860 mm |
| Laser Class | Class II (Eye-Safe) |
| Built-in Photogrammetry System | Standard |
| Volumetric Accuracy | 0.015 mm + 0.030 mm/m (with 1 m high-precision reference bar) |
| Output Formats | STL, PLY, OBJ, IGS, WRL, XYZ, DAE, FBX, MA, ASC |
| Interface | USB 3.0 |
| Operating Temperature | −10 °C to 40 °C |
| Brand | SHINING 3D |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | EINSTAR VEGA |
| Measurement Speed | 20 FPS |
| Resolution | 0.05 mm – 3 mm |
| Unit Weight | 535 g |
| Brand | CREAMFORM |
|---|---|
| Model | SmartFlash |
| Type | High-Precision Vision-Based Displacement & Dimensional Metrology Sensor |
| Origin | Guangdong, China |
| Construction | Full Aluminum Alloy Frame with Crossed-Roller Bearings and Linear Motor Drive |
| Optical System | Dual Telecentric Lenses with Distortion Correction Algorithm |
| Illumination | Multi-Angle + Low-Angle Custom LED Source |
| Image Processing | Sub-Pixel Edge Detection, Burr Filtering, Adaptive Contrast Enhancement |
| Automation | CAD-Driven Program Generation (No Coding Required), Auto-Focus, Automatic Feature Registration |
| Measurement Mode | Parallel Feature Extraction (≥100 Parts, ≥300 Features per Batch) |
| Data Output | Multi-Format Reports (PDF/Excel/CSV), PLC Integration (Modbus TCP, EtherNet/IP, PROFINET) |
| Compliance | Designed for ISO 10360-7 & VDI/VDE 2634 Part 2 Conformance Testing |
| Software | Proprietary Real-Time Metrology Suite with Audit Trail Logging (21 CFR Part 11 Ready) |
| Brand | SPL |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Transient (Pulsed) Laser Wavefront Distortion Interferometer |
| Pricing | Upon Request |
| Wavelength Range | UV to Mid-Far IR (customizable per application) |
| Aperture Diameter | 10 mm (standard), scalable per user specification |
| Wavefront RMS Accuracy | < λ/15 |
| Maximum Wavefront Deviation Measurement Range | 50 mm |
| Pulse Width Compatibility | Down to 1 ns |
| Laser Damage Threshold | High |
| Camera Resolution | ≥1024 × 1024 (scientific-grade CCD) |
| Interferometric Architecture | Common-path shearing interferometry |
| Software Output | 3D wavefront phase map, contour plot, PV & RMS values, wavefront gradient, Strehl ratio, OTF, PSF |
| Operating System | Windows 2000 or later |
| Compliance | Compatible with ISO 10110-5, ISO 21254 (Laser Damage Threshold Testing), ASTM E284 (Standard Terminology for Optics), supports GLP/GMP audit trails via optional logging modules |
| Brand | ACCRETECH (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Type | CNC-Controlled Non-Contact + Contact Hybrid Profilometer |
| Axes | 5-Axis Synchronized Motion |
| Drive Speed | Up to 100 mm/s |
| Z-Range | 10 mm |
| X-Range | 200 mm |
| Vertical Resolution | 0.31 nm |
| Measurement Principle | High-Stability Homodyne Laser Interferometry (for CREST DX) + Dual-Sensor Tactile Stylus (for NEX 100 DX/SD) |
| Compliance | ISO 25178-605, ISO 4287, ISO 4288, ISO 11562, ISO 21920-1 |
| Operation Mode | Fully Automated |
| Sensor Options | Integrated Dual-Mode (Stylus + Auto-Focus Optical) |
| Software Platform | SURFPAK DX v8.x with Audit Trail & CFR 21 Part 11 Ready Configuration |
| Data Export | CSV, XML, STEP AP212, PDF Report (GLP/GMP Compliant Templates) |
| Brand | ABERLINK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Extol 370/520 |
| Pricing | Available Upon Request |
| Configuration | Hybrid (Contact + Optional Non-Contact Probes) |
| Operation Mode | Fully Automated |
| Machine Architecture | Vertical Cantilever |
| Measurement Principle | Contact-Based Tactile Metrology (ISO 10360-2 Compliant) |
| Brand | Taylor Hobson |
|---|---|
| Origin | United Kingdom |
| Model | PGI Freeform |
| Measurement Principle | Contact Stylus Profilometry with Radial & Grating-Scan Modes |
| Vertical Range | 28 mm |
| Vertical Resolution | 0.8 nm |
| Tilt Capability | ±50° |
| Form Error Accuracy | <150 nm PV |
| Motion Architecture | FEA-Optimized Ultra-Stiff Mechanical Axes |
| Compliance | ISO 10360, ISO 1101, ISO 16610, ISO 25178 (Part 2, Part 601–607), ASTM E1155, USP <1059>, GLP/GMP-ready audit trail support in software |
| Brand | TKN |
|---|---|
| Model | DR30 |
| Origin | Beijing, China |
| Type | Contact Profilometer |
| Standards Compliance | ISO 4287, ISO 13565, DIN EN ISO 3274, ANSI B46.1, JIS B 0601 |
| Measurement Principle | Stylus-Based Contact Profilometry |
| Data Storage | 100 sets of raw profile data + waveform traces |
| Battery Life | >20 hours continuous operation |
| Interface | USB, optional Bluetooth |
| Display | Dual-language (English/Chinese) LCD with real-time clock |
| Power Management | Auto-sleep and auto-shutdown |
| Protection | Anti-stall motor circuitry and firmware safeguard |
| Connectivity | PC communication + direct thermal printer output |
| Optional Accessories | Small-hole probe, curved-surface probe, deep-groove probe, precision measurement stage, probe protective sleeve, extension rod |
| Brand | ACCRETECH |
|---|---|
| Origin | Japan |
| Model | DM45514 |
| Type | Contact Stylus-Based Surface Profilometer |
| Measurement Principle | Inductive Displacement Sensing with Diamond Stylus |
| Vertical Resolution | Sub-nanometer (typical) |
| Lateral Resolution | ≤ 0.1 µm (dependent on scan speed and stylus tip radius) |
| Scan Length | Up to 100 mm (standard configuration) |
| Vertical Range | ±1 mm |
| Compliance | ISO 25178-2, ISO 4287, ISO 4288, ASME B46.1 |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | TONiC™ |
| Maximum Speed | 10 m/s |
| Resolution | down to 5 nm |
| Subdivision Error | < ±30 nm |
| Operating Temperature | up to 70 °C |
| Compliance | RoHS, WEEE |
| Output Options | 1 Vpp analog, digital via 15-pin D-sub connector with diagnostics |
| IN-TRAC™ Reference Mark | Integrated bidirectional optical zero mark |
| Signal Stability | Enhanced by AGC and optical filtering |
| Installation | Tool-less, self-aligning readhead with dual diagnostic LEDs |
| Brand | Topo/TP |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | XGL-2A |
| Pricing | Upon Request |
| Brand | Topo (TP) |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | XGL-3 |
| Pricing | Upon Request |
| Brand | Topo (TP) |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | XGL-6 |
| Pricing | Available Upon Request |
| Brand | TopOptics (TP) |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | OEM Manufacturer |
| Model | XGL-1 |
| Output Wavelengths | 1064 nm & 532 nm |
| Beam Divergence | ≤5 mrad |
| Alignment Laser | 632.8 nm He–Ne |
| Electro-Optic Q-Switch Voltage Range | 1–5 kV (adjustable) |
| Pulse Energy | 600 mJ @ 1064 nm (free-running, no Q-switching) |
| Included Components | He–Ne alignment laser with power supply, λ/2 and polarizing optics for 1064 nm, Q-switch driver, HR/OC mirrors @ 1064 nm, iris diaphragm, water-cooling unit, Nd:YAG rod, flashlamp, KDP or BBO frequency-doubling crystal, LiNbO₃ or KD*P Q-switch crystal, beam target, elliptical pump cavity |
| Brand | TQC Sheen |
|---|---|
| Origin | Netherlands |
| Model | Hull Roughness Gauge |
| Accuracy | ±5 µm (±2% at 50 mm/s) |
| Scanning Speed | 50 mm/s |
| Data Storage | Up to 4 full measurement sessions (>10,000 individual readings) |
| Interface | USB-to-serial PC connection |
| Power Supply | 4 × AA batteries |
| Battery Life | 20 hours (backlight on), 200 hours (backlight off) |
| Operating Environment | Marine-grade portable design with IP-rated waterproof housing |
| User Interface | 4-way directional keypad for single-hand operation |
| Accessories | Integrated lanyard, rugged carry case |
| Brand | TQC Sheen |
|---|---|
| Origin | Netherlands |
| Model | SP1560 |
| Measurement Range | 0–3.4 mm (0–0.13 in) |
| Accuracy | ±5 µm (±0.2 mil) |
| Repeatability | 1 µm (±0.04 mil) |
| Probe Thread | M2.5 × 0.45 |
| Probe Shank Diameter | 8 mm (0.3 in) |
| Dual-Function Capability | Surface Roughness + Coating Thickness |
| Compliance | ASTM D4417, ISO 2808 |
| Brand | Trimos |
|---|---|
| Origin | Switzerland |
| Model | ALESTA |
| Measurement Range | 0.1–1015 mm |
| Resolution | 1 µm |
| Operating Environment | 22 °C ± 0.5 °C |
| Measurement Principle | Precision Mechanical Interpolation with Linear Encoder-Based Displacement Sensing |
| Key | Brand: Trimos |
|---|---|
| Origin | Switzerland |
| Model | HS |
| Measurement Range | 0–3050 mm |
| Resolution | 0.1 µm |
| Accuracy | ±0.1 µm |
| Operating Environment | 20 °C ± 0.5 °C |
| Measurement Principle | Absolute Interferometric Length Metrology (Long-Range Linear Encoder-Based) |
| Brand | TW (Shandong Tianwei Environmental Technology) |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | TW-WY1 |
| Measurement Principle | GNSS-based Real-Time Kinematic (RTK) Displacement Monitoring with Ultrasonic Auxiliary Sensor Integration |
| Static Accuracy (Differential Mode) | Horizontal ±(2.5 mm + 1 ppm), Vertical ±(5 mm + 1 ppm) |
| Antenna Type | Choke-Ring Antenna with Magnetic Absorbing Material |
| Communication Protocols | Modbus-RTU, RTCM3 v3.x |
| Data Output Interfaces | RS485 (ASCII & Modbus-RTU), TCP/HTTP/UDP |
| Power Supply | DC 10–15 V (sensor) |
| Operating Temperature | −40 °C to +85 °C |
| Humidity Range | 0–95% RH (non-condensing) |
| Enclosure Dimensions | Ø360 mm × H163 mm |
| Typical Power Consumption | 0.6 W (sensor + LoRa), 0.96 W (with cloud upload) |
| Compliance | Supports ISO/IEC 17025-aligned field calibration workflows, compatible with GLP/GMP data integrity requirements via audit-trail-enabled platform logging |
| Brand | TZTEK |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | VME222 |
| Operation Mode | Fully Automatic |
| Measurement Range | ≥200 × 200 × 200 mm |
| Encoders | 0.5 µm Industrial-Grade Linear Glass Scale |
| XY-Axis Speed | 500 mm/s |
| Z-Axis Speed | 100 mm/s |
| Optical Magnification | 25×–160× (Stepless Electronic Turret Recognition) |
| Camera | High-Resolution Color Industrial Digital Camera |
| Illumination System | Programmable 6-Ring 8-Zone LED Surface Illuminator, Adjustable LED Backlight, Coaxial Illumination Option |
| Origin | Italy |
|---|---|
| Supplier Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M609 TECHINO |
| Pricing | Upon Request |
| Key | Origin: Sweden |
|---|---|
| Type | Imported Instrument |
| Model | VL400 |
| Measurement Principle | Dual-mode (Class 1 Laser / Pulse-Echo Ultrasonic) |
| Dimensions | 95 × 70 × 58 mm |
| Weight | 260 g (incl. battery) |
| Power | 1×CR2 3V lithium battery |
| Power Consumption | 60 mW |
| Operating Temperature | −15 °C to +45 °C |
| Max Height Range | 0–999 m |
| Height Resolution | 0.1 m |
| Angle Range | −55° to +85° |
| Angle Resolution/Accuracy | 0.1° |
| Laser Range (diffuse target) | up to 350 m |
| Laser Range (retroreflective) | 130–900 m |
| Laser Distance Resolution | 0.5 m (<100 m), 1 m (≥100 m) |
| Laser Distance Accuracy | ±0.25 m (<100 m), ±1 m (≥100 m) |
| Ultrasonic Range (60° transducer) | ≥30 m |
| Ultrasonic Range (360° transducer) | ≥20 m |
| Ultrasonic Resolution | 0.01 m |
| Ultrasonic Accuracy | <1% of reading |
| T3 Transponder Dimensions | Ø70 mm |
| T3 Weight | 85 g (incl. AA battery) |
| T3 Power | ≤9 mW |
| Interface | Built-in infrared data port |
| Units | Switchable metric/imperial (distance/height), degree/grade/% (angle) |
| Brand | WALE |
|---|---|
| Origin | Shaanxi, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | FFT-RDM Series |
| Instrument Type | Roundness Measuring Instrument |
| Harmonic Analysis Range | 1–150 UPR |
| Radial Error (FFT Max1) | ≤10.04 µm |
| Radial Error (FFT Max2) | ≤0.025 µm |
| Radial Error (FFT Max3) | ≤0.015 µm |
| Spindle Rotational Speed | 6 rpm |
| Max Measurable Diameter | 260 mm |
| Max Workpiece Diameter | 400 mm |
| Sensor Range | ±300 µm |
| Sensor Linearity Accuracy | 3 nm + 5% of reading |
| Sensor Resolution | 0.001 µm |
| Horizontal Arm Travel | 165 mm |
| Horizontal Overhang | 25 mm |
| Circumferential Sampling Points | 16,384 points/revolution |
| Angular Division Accuracy | 0.6 arcsec per 1000 divisions |
| Vibration Isolation | Rubber-Mounted Rigid Steel-Frame Base |
| Brand | Weijing 3D |
|---|---|
| Model | AutoScan™ 1000 |
| Measurement Principle | Fringe Projection Profilometry (Structured Light) |
| Max. Measurable Volume | Ø1000 mm × H1000 mm |
| Host Weight | 4 kg |
| Origin | Hubei, China |
| Instrument Type | Industrial Automated 3D Coordinate Measurement System |
| Brand | Wil |
|---|---|
| Origin | Shaanxi, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | CYM Series |
| Price Range | USD 14,000 – 42,000 (FOB) |
| Instrument Type | Cylindricity Measuring Instrument |
| Measured Parameters | Roundness, Coaxiality, Concentricity, Flatness, Radial Runout, Parallelism, Perpendicularity |
| Spindle Rotational Accuracy | (0.025 + 6H/10000) µm |
| Bearing Type | Air-bearing Spindle |
| Max. External Diameter Measurement | 300 mm |
| Rotational Speeds | 6, 8, 10 rpm |
| Brand | X-Rite |
|---|---|
| Origin | USA |
| Model | TAC7 |
| Sample Area | 300 mm × 220 mm |
| Max Sample Height | 30 mm |
| Single-Point Measurement Diameter | 120 mm |
| Depth of Field | ±3 mm |
| Color Capture Angles | 5°, 22.5°, 45°, and 67.5° (four monochrome cameras) |
| Spatial Resolution | Up to 385 dpi at 5° camera (66 µm/pixel) |
| Illumination | 32 white LEDs, linear light scanner for near-specular illumination, three spectral wheels, backlight unit for alpha mapping |
| Software Integration | Pantora Material Hub, AxF™ (Appearance Exchange Format) compliant |
| Security Compliance | Enterprise-grade IT infrastructure compatible (TLS 1.2+, AES-256 encryption, LDAP/AD integration) |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | RT-200 |
| Price Range | USD 560 – 920 |
| Measurement Principle | Inductive Contact Profilometry (Stylus-Based) |
| Display | 128×64 OLED Dot-Matrix |
| Battery | Rechargeable Li-ion, >20 h Continuous Operation |
| Data Storage | 100 Sets (Raw Profile + Parameters) |
| Compliance | ISO 4287, ISO 4288, DIN EN ISO 3274, ANSI B46.1, JIS B 0601, JIS B 0611 |
| Measured Parameters | Ra, Rz, Rq, Rt, Rp, Rv, R3z, R3y, RzJIS, Rsk, Rku, Rsm, Rmr |
| Sampling Length | 0.25 mm / 0.8 mm / 2.5 mm (Auto-selectable per standard) |
| Cutoff Wavelength | λc = 0.25 / 0.8 / 2.5 mm |
| Vertical Resolution | 0.01 µm |
| Traverse Speed | 0.5 mm/s (standard), 0.1–1.0 mm/s adjustable |
| Stylus Tip Radius | 5 µm (diamond, 90° included angle) |
| Force | 4 mN (standard), 0.75–15 mN programmable |
| Interface | USB 2.0 (for PC communication & firmware update) |
| Optional Accessory | Thermal Printer Module |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Model | ATOS Q |
| Type | Optical 3D Coordinate Measuring System |
| Measurement Principle | Triple-camera triangulation with fringe projection (3-in-1 sensor head) |
| Weight | 4 kg (sensor head only) |
| Compliance | ISO 10360-8, VDI/VDE 2634 Part 2, ASTM E2924 |
| Software Platform | GOM Inspect Pro (with GD&T, mesh comparison, deviation analysis, and automated reporting) |