Titan FO-175 Forced-Air General Purpose Oven

Overview

The Titan FO-175 is a benchtop forced-air general purpose oven engineered for consistent thermal processing in quality control laboratories, academic research settings, and small-scale manufacturing environments. It operates on the principle of convection heating—using an internal blower to circulate heated air uniformly throughout the chamber—ensuring minimal temperature gradients (< ±1.5 °C at 100 °C) and high reproducibility across repeated cycles. Designed to ISO 9001-compliant manufacturing standards, the FO-175 delivers stable temperature control within a range of ambient +10 °C to 250 °C, with a standard resolution of 0.1 °C and programmable ramp/soak profiles via its digital PID controller. Its stainless steel interior (304 grade), reinforced double-wall insulation, and front-mounted door with silicone gasket support long-term durability and energy efficiency.

Key Features

• Forced-air convection system with tangential blower for uniform airflow and reduced thermal stratification
• Digital PID temperature controller with real-time display, adjustable setpoint accuracy of ±0.5 °C, and auto-tuning capability
• Stainless steel (304) interior chamber (W × D × H: 450 × 450 × 500 mm; 101.25 L volume) resistant to corrosion and easy to sanitize
• Double-layer insulated walls with mineral wool insulation to minimize heat loss and improve thermal stability
• Over-temperature protection circuit with independent mechanical safety thermostat (cut-off at 260 °C)
• Adjustable shelf supports (3 positions) accommodating up to two 300 mm × 300 mm shelves (stainless steel, load capacity: 15 kg per shelf)
• Front-hinged door with high-integrity silicone sealing gasket and integrated viewing window (tempered glass)

Sample Compatibility & Compliance

The FO-175 is suitable for drying, baking, curing, sterilization validation (non-medical), and moisture content determination of non-volatile, non-hazardous solid and powder samples—including polymers, pharmaceutical excipients, ceramics precursors, soil specimens, and filter papers. It complies with IEC 61000-6-3 (EMC emission standards) and meets basic electrical safety requirements per GB 4793.1–2007 (equivalent to IEC 61010-1). While not certified for Class I Division 1 hazardous locations or medical device sterilization (e.g., EN 285), it supports GLP-aligned documentation when paired with external calibrated data loggers. Temperature uniformity mapping per ASTM E2297–22 can be performed using NIST-traceable thermocouples to verify chamber performance prior to critical QC use.

Software & Data Management

The FO-175 operates as a standalone instrument with no embedded software or network interface. All operational parameters are configured manually via front-panel controls. For audit-ready traceability, users may integrate optional third-party USB or Ethernet-enabled temperature data loggers (e.g., Omega OM-DAQPRO-5300 or Testo 176 T4) that record time-stamped temperature readings at user-defined intervals (1 s to 24 h). Logged data exports in CSV format and supports 21 CFR Part 11–compliant electronic signatures when used with validated laboratory information management systems (LIMS). Firmware updates are not applicable; hardware calibration verification is recommended annually using a certified reference thermometer (±0.2 °C accuracy).

Applications

• Residual solvent removal from coated substrates in R&D coating development
• Constant-temperature conditioning of tensile test specimens per ASTM D618
• Gravimetric moisture analysis of bulk raw materials (e.g., lactose, microcrystalline cellulose) per USP <1251>
• Pre-heating of glassware and metal fixtures prior to cleanroom assembly
• Accelerated aging studies of packaging adhesives under controlled thermal stress
• Post-curing of low-Tg epoxy composites in university materials labs

FAQ

Is the FO-175 suitable for sterilizing surgical instruments?
No. It lacks the steam saturation, pressure control, and validation protocols required for medical sterilization (e.g., autoclaving per ISO 17665). It is intended for non-sterile thermal processing only.

Can the oven be stacked or installed in a cabinet?
No. Minimum side/rear clearance of 100 mm is required for ventilation and heat dissipation. Stacking voids the warranty and risks thermal shutdown.

Does Titan provide factory calibration certificates?
Yes—each unit ships with a factory temperature verification report (at 100 °C and 200 °C), traceable to national standards via Titan’s ISO/IEC 17025-accredited metrology lab (CNAS L8722).

What is the power requirement?
220 V AC ±10%, 50/60 Hz, single-phase; rated input: 2.8 kW; requires dedicated 16 A circuit breaker with earth ground.