- All
- Favorite
- Popular
- Most rated
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | SURFCOM NEX 031SD |
| Measurement Principle | Stylus-based profilometry |
| Sensor Type | Dual-purpose (contour + roughness) |
| Standard Stylus Force | 0.75 mN |
| Roughness Vertical Range | ±500 µm |
| Drive Mechanism | Linear motor |
| Temperature Compensation | Yes (20 ± 5 °C operational range) |
| Sensor Mounting | V-groove + three-point ball-pin定位 |
| Quick-change Arm | Yes, with collision detection and auto-stop |
| Measurement Orientation | Upward, downward, lateral (via bracket or stylus reorientation) |
| Compliance Ready | Designed for ISO 4287, ISO 4288, ISO 25178-2, JIS B 0601, ASME B46.1, and GLP/GMP-aligned data integrity workflows |
| Brand | ACCRETECH (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | R73A |
| Bearing Type | Aerostatic Air Bearing |
| Measurement Principle | Radius Method with Rotating Sensor Spindle |
| Z-Axis Travel | 1000 mm |
| Radial (R-Axis) Auto-Zero Function | Yes |
| Tilt & Centering Compensation | Fully Automated via Software |
| Measurement Magnification | 50× to 10,000× (8-step selectable) |
| Sensor Traverse Mechanism | Integrated Horizontal Probe Translation Unit |
| Z/R-Axis Position Encoders | Built-in Absolute Encoders |
| Air Pressure Monitoring | Real-time Diagnostic Circuit |
| Software Platform | ACCTee Measurement Suite (v6.x or later) |
| Compliance Framework | Designed for ISO 1101, ISO 12181 (Roundness), ISO 12180 (Cylindricity), and ASME Y14.5 geometric tolerance evaluation |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 54 |
| Maximum Measurable Diameter | Ø300 mm |
| Radial Travel (R-axis) | 170 mm |
| Vertical Travel (Z-axis) | 300 mm (500 mm with tall column) |
| Max. Workpiece Diameter | Ø580 mm |
| Max. Measurable Height | 300 mm (500 mm with tall column) |
| Spindle Accuracy (Rotational Axis) | (0.02 + 4H/10000) µm per JIS B 7451-1997 (H = height from table to measurement point) |
| Axial Accuracy | (0.02 + 4H/10000) µm per JIS B 7451-1997 (H = distance from rotation center to probe point) |
| Z-axis Straightness | 0.12 µm/100 mm |
| R-axis Straightness | 0.8 µm/150 mm |
| Z-axis Parallelism | 0.8 µm/290 mm (1.18 µm/490 mm with tall column) |
| R-axis Parallelism | 1.0 µm/150 mm |
| Radial Indication Accuracy | (2 + L/170) µm (L = measurement length in mm) |
| Rotation Speed (θ-axis) | 2–10 rpm during measurement |
| Z-axis Traverse Speed | 0.5–6 mm/s (max 50 mm/s) |
| R-axis Traverse Speed | 0.5–6 mm/s (max 25 mm/s) |
| Auto-Stop Positioning Accuracy | ±5 µm |
| Rotating Table Diameter | Ø220 mm |
| Centering & Tilt Adjustment Range | ±2 mm / ±1° |
| Max. Load Capacity | 30 kg |
| Stylus Force | 30–100 mN (adjustable) |
| Stylus Tip | Ø1.6 mm steel ball, 53 mm length |
| Data Points per Revolution | 14,400 |
| Digital Filter Types | Gaussian, 2RC, Multi-slot |
| Low-pass cutoffs | 15–1000 cycles/rev (rotational), 0.025–8 mm (axial) |
| Band-pass | 15–1500 cycles/rev |
| Measurement Range | ±1000 µm / ±200 µm |
| Evaluation Methods | MZC (Minimum Zone Circle), LSC (Least Squares Circle), MIC (Maximum Inscribed Circle), MCC (Minimum Circumscribed Circle), N.C. (No Correction), Multi (Composite Specification) |
| Measured Parameters | Roundness, Flatness (single/multi-plane), Parallelism, Concentricity, Coaxiality, Cylindricity, Radial Runout, Perpendicularity, Thickness Variation, Total Runout, Radius Measurement, Partial Arc Analysis, Z-axis & R-axis Straightness, Axial Linearity, Cylindrical Surface Deviation |
| Analysis Functions | Auto-centering & auto-tilt correction, Groove Detection (upper/lower limit, angular position, cursor-based), Combined roundness evaluation modes, Design Nominal Value Comparison, 3D Cylindricity Visualization (wireframe, shaded, contour), Real-time profile display, Profile Characterization (bearing ratio curve, amplitude distribution, power spectral density), Wide-range assessment capability, CNC-programmed automated measurement sequence |
| Standard Accessories | Offset-type chuck holder |
| Optional Upgrades | CNC-compatible offset chuck holder |
| Display | 17″ LCD monitor |
| Output | Color printer or laser printer (SD card optional) |
| Power Supply | AC 220 V, 50–60 Hz ±10%, ~470 VA (excl. printer) |
| Pneumatic Supply | 0.35–0.7 MPa supply pressure |
| consumption | 30 NL/min |
| Dimensions (W×D×H)/Weight | DX model: 1500×925×1600 mm (1800 mm with tall column), 500 kg (510 kg) |
| SD model | 2050×900×1700 mm (1900 mm), 194 kg (204 kg) |
| Brand | ACCRETECH (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrumentation |
| Service Fee | USD 1,400–2,800 (excl. tax & travel) |
| Field Experience | 30 Years |
| Response Time | ≤7 Business Days |
| Compliance | ISO/IEC 17025-aligned Procedures |
| Environmental Requirements | 18–22 °C (±0.5 °C/h), 45–75% RH (non-condensing) |
| Power Supply Verification | 110–240 VAC, 50/60 Hz, L/N/E phase integrity, UPS mandatory |
| Preventive Maintenance Scope | Granite surface cleaning, linear guide & lead screw anti-corrosion, stylus handling protocol, thermal drift compensation calibration verification, vibration isolation assessment |
| Brand | ACCRETECH |
|---|---|
| Origin | Japan |
| Model | RONDCOM NEX |
| Measurement Capabilities | Roundness, Cylindricity, Straightness (axis & face), Parallelism, Perpendicularity, Coaxiality, Concentricity, Taper, Diameter, Radial Runout, Total Radial Runout, Generatrix Straightness, Face Straightness, Face Runout, Flatness, Wall Thickness Variation, Angular Deviation, Short Arc Radius, Piston Profile |
| Sensor Mount | Offset-Type CNC Probe Holder |
| R-Axis Tracking Function | Enabled |
| Opposed-Diameter Measurement | Supported |
| Compliance | Designed for ISO 1101, ISO 5436-1, ISO 12181, ISO 12780, and ASME Y14.5 geometric tolerance evaluation |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | NEX |
| Measurement Range (Max. Diameter) | Φ300 mm |
| Max. Vertical Travel (Z-axis) | 300 mm / 500 mm |
| Max. Radial Travel (R-axis) | 180 mm |
| Max. Workpiece Height | 300 mm / 500 mm |
| Max. Loading Diameter | Φ580 mm |
| Max. Measuring Depth (Arm Length) | 150 mm |
| Spindle Radial Accuracy | (0.02 + 3.2H/10,000) µm per JIS B 7451-1997 (H = height in mm) |
| Spindle Axial Accuracy | (0.02 + 3.2R/10,000) µm per JIS B 7451-1997 (R = radius in mm) |
| Z-axis Straightness | 0.10 µm/100 mm (short range), 0.15 µm/300 mm (full range) |
| Brand | ACCRETECH |
|---|---|
| Origin | Japan |
| Model | DM45514 |
| Type | Contact Stylus-Based Surface Profilometer |
| Measurement Principle | Inductive Displacement Sensing with Diamond Stylus |
| Vertical Resolution | Sub-nanometer (typical) |
| Lateral Resolution | ≤ 0.1 µm (dependent on scan speed and stylus tip radius) |
| Scan Length | Up to 100 mm (standard configuration) |
| Vertical Range | ±1 mm |
| Compliance | ISO 25178-2, ISO 4287, ISO 4288, ASME B46.1 |
| Brand | ACCRETECH (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | DM43801 |
| Type | Standard CMM Probe Styli |
| Compliance | ISO 10360-5, VDI/VDE 2617 Part 5 |
| Mounting Interface | M3 thread (standard for most tactile CMM probe heads) |
| Ball Material | Ruby (Al₂O₃) |
| Stem Material | Stainless Steel or Carbon Fiber (configurable) |
| Total Length Definition | From rear mounting face to center of stylus ball |
| Effective Working Length (EWL) | Distance from stylus ball center to first interference point along surface normal direction |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 31C |
| Measurement Range (Max. Diameter) | Ø250 mm |
| Z-Axis Vertical Travel | 200 mm |
| R-Axis Radial Travel | 125 mm |
| Spindle Rotational Accuracy | (0.04 + 6H/10000) µm per ISO 4291 / JIS B7451 |
| Minimum Zone Circularity Deviation | (0.02 + 3H/10000) µm |
| Z-Axis Straightness | 0.50 mm / 100 mm |
| Sensor Linear Range | ±400 µm |
| Stylus Tip | Ø1.6 mm sintered carbide sphere |
| Measuring Force | 70 mN |
| Rotation Speed (θ-axis) | 6 rpm |
| Z-Axis Feed Speed (Measuring) | 0.6–5 mm/s |
| Air Supply Requirement | 0.35–0.7 MPa |
| Power Supply | AC 100 V, 50/60 Hz |
| Weight | 120 kg |
| Dimensions (W×D×H) | 1800 × 1000 × 1700 mm (with optional system stand) |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | XYZAX AXCEL |
| Configuration | Bridge-type (Vertical CMM) |
| Operation Mode | Fully Automatic |
| Measurement Principle | Contact-based tactile probing |
| Standard Air Suspension | Included for Z800+ models |
| Optional Features | Auto Probe Changer, PH10T Motorized Indexing Head with TP200 Sensor (±180° horizontal, 0–105° vertical, 7.5° minimum indexing step, supports up to 300 mm extension probes) |
| Drive System | Newly developed high-acceleration linear drive (64% faster velocity, 35% higher acceleration vs. prior generation) |
| Structural Design | Reinforced rigid bridge architecture with optimized Y-axis torsional stiffness |
| Energy Efficiency | Intelligent air supply cutoff during standby mode |
| Compliance | Designed to meet ISO 10360-2 (CMM performance verification) and VDI/VDE 2617 standards |
| Brand | ACCRETECH |
|---|---|
| Origin | Japan |
| Model | SURFCOM NEX |
| Type | Contact Profilometer / Surface Roughness Tester |
| Operating Principle | Stylus-Based Profilometry |
| Category | Imported Precision Geometric Measurement Instrument |
| Distributor Status | Authorized General Distributor |
| Price Range | USD 68,000 – 136,000 (FOB Japan) |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 43C |
| Spindle Accuracy | (0.02 + 6H/10000) µm per ISO 4291/JIS B7451 |
| Max. Workpiece Diameter | Ø250 mm |
| Radial (R-axis) Travel | 125 mm |
| Vertical (Z-axis) Travel | 300 mm |
| Max. Height Measurement | Ø520 mm (OD) / Ø300 mm (ID) |
| Spindle Speed | 6 rpm |
| Z-axis Measurement Speed | 0.6–6 mm/s |
| Sensor Linear Range | ±400 µm |
| Stylus Tip | Ø1.6 mm sintered carbide sphere |
| Measuring Force | 70 mN |
| Filter Options | Digital 2RC & Gaussian, with cutoffs from 15 to 500 undulations/revolution (rotational) and 0.025 to 8 mm (axial) |
| Display | 15″ color LCD |
| Power Supply | AC 100 V, 50/60 Hz |
| Air Supply | 0.35–0.7 MPa, 30 L/min (NTP) |
| Footprint | 1800 × 1000 × 1700 mm (w/d/h) |
| Mass | 130 kg |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | HANDYSURF+ |
| Measurement Principle | Stylus Profilometry (Contact Mode) |
| Measurement Method | Contact |
| Filter Type | 2RC Gaussian Filter |
| Evaluation Length | 0.2–16 mm |
| Vertical Resolution | 0.0007 µm |
| Measurable Height Range | −210 to +160 µm |
| Display | 2.4″ Color LCD with Full-Character Chinese Support |
| Analysis Modes | Profile Waveform + Parameter Table |
| Standard Analyses | Load Curve, Amplitude Distribution, Peak Count, Motif Analysis |
| Auto Acceptance/Rejection | Configurable Threshold-Based Judgment |
| Compliance | Designed to support ISO 4287, ISO 4288, ISO 13565-1/2/3, ASME B46.1, and JIS B 0601 |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 41C |
| Rotary Axis Precision | (0.04 + 6H/10000) µm per ISO 4291/JIS B7451 |
| Z-Axis Travel | 200 mm |
| Maximum Workpiece Diameter | Φ250 mm |
| Maximum Height Measurement | Ø420 mm (OD) / Ø200 mm (ID) |
| Spindle Speed | 6 rpm |
| Z-Axis Measurement Speed | 0.6–5 mm/s |
| Radial (R-Axis) Travel | 125 mm |
| Pneumatic Supply | 0.35–0.7 MPa |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | SURFCOM 1800G |
| Z-Axis Range | 50 mm |
| X-Axis Range | 100 mm (200 mm optional) |
| Z-Axis Indication Accuracy | ±0.25% FS (±4 µm within 5 mm) |
| Z-Axis Resolution | 0.1 µm (±2.5 mm), 0.4 µm (10 mm), 1 µm (±25 mm) |
| X-Axis Indication Accuracy | ±(1 + 2L/100) µm (L in mm) |
| X-Axis Straightness | (0.05 + 1.5L/1000) mm |
| Measurement Principle | Contact stylus profilometry with Moiré fringe interferometric X-axis positioning and differential voltage displacement sensing on Z-axis |
| Stylus Force | 0.75 mN (standard), ≤30 mN (max) |
| Stylus Tip Radius | 2 µm or 25 µm (interchangeable) |
| Stylus Material | Diamond or superhard alloy |
| Traverse Speeds | 0.03–6 mm/s (8-step programmable) |
| Vertical Column Speed | 3 mm/s |
| Filter Types | 2RC standard, 2RC phase-corrected, Gaussian |
| Cutoff Wavelengths | 0.025–25 mm (7 standard values) |
| Standards Compliance | JIS B 0601:2001/1994/1982, ISO 4287, ISO 13565, DIN 4768, ASME B46.1, CNOMO |
| Roughness Parameters | Ra, Rq, Rv, Rp, Rc, Rz, Rmax, Rt, Rz(JIS), R3z, Sm, S, RDa, RDq, Rla, Rlq, Til, TA, lr, Pc, Rmr, tp2, Rmr2, Rdc, AVH, Hmax, Hmin, AREA, NCRX, R, Rx, AR, NR, CPM, SR, SAR |
| Profile Evaluation | Straightness, flatness, roundness, curvature, slope, angle, radius, distance, coordinate difference, polar coordinate difference, symmetry (point-point, point-circle, line-line, circle-circle, etc.), envelope wave profile, motif analysis (roughness & waviness), load curve, power spectral density (PSD), amplitude distribution |
| Software Functions | Auto-condition setup (patented AI function), CNC measurement sequence recording & playback, automatic feature recognition & dimensioning, shape synthesis, tilt compensation (linear, R-surface, front/rear/both-end, spline), macro programming, peak/valley search, workpiece trajectory mapping, design vs. actual comparison, mirror inversion |
| Brand | Accretech Tokyo Seimitsu |
|---|---|
| Origin | Japan |
| Product Type | Contact Profilometer / Surface Roughness Tester |
| Operating Principle | Stylus-Based Profilometry |
| Model Range | 1600G, S1400G, 1800G |
| Compliance | Designed for ISO 25178, ISO 4287, ISO 4288, and JIS B 0601-compliant surface metrology |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | DM43827 |
| Type | Contact Stylus for Geometric Metrology |
| Application | Roundness, Surface Roughness, and Profile Measurement Systems |
| Compliance | Designed for Integration with Accretech Roundness/Cylindricity Testers (e.g., RA-2200, RA-1200), PGI Profilometers, and Compatible CMM Platforms |
| Mounting Interface | Standard M2.5 × 0.45 mm Threaded Shank |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | DM45505 |
| Type | Contact Stylus Probe for Surface Profilometry and Roughness Measurement |
| Compliance | Designed for ISO 25178, ISO 4287, ASME B46.1, and JIS B 0601-compliant profilometric systems |
| Mounting Interface | Standard 8-32 UNC threaded shank (compatible with Accretech SJ-410/SJ-510/SJ-610 series, Formtracer series, and other OEM profilometers) |
| Tip Geometry | Spherical diamond tip, nominal radius 2 µm or 5 µm (standard variant), 90° included angle conical backup geometry |
| Shank Diameter | 3.0 mm |
| Total Length | 25 mm |
| Maximum Tracking Force | ≤ 1.5 mN (adjustable via instrument feedback loop) |
| Material | High-purity synthetic diamond tip bonded to hardened stainless steel shank |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | RONDCOM 60A |
| Measurement Projects | Roundness, Cylindricity, Straightness (axial & radial), Parallelism, Perpendicularity, Coaxiality, Concentricity, Taper, Diameter, Radial Runout, Total Radial Runout, Generatrix Straightness of Cylinders, Face Straightness, Face Runout, Flatness, Wall Thickness Variation, Angular Deviation, Short Arc Radius, Piston Profile Analysis |
| Structural Materials | Granite Base, Column & R-Axis Carriage |
| Bearing Technology | Air Bearings on Z- and R-Axes |
| Motion Control | CNC Programmable Axes (θ, Z, R) |
| Diameter Measurement | Integrated R-Axis Linear Scale (requires optional calibration standard) |
| Data Reanalysis | Up to 40 Cross-Sections with Recalculation under Modified Reference Axis or Filtering Conditions |
| Compliance | CE Marked, Designed for In-Line Production Metrology Environments |
| Applications | Precision Inspection of Engine Components (pistons, fuel injectors), Rolling Element Bearings (ball, fluid, magnetic drums), Aerospace Turbine Parts, and High-Tolerance Machined Surfaces |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | EM46000-S302 |
| Type | High-Precision Contact Profilometer for 2D/3D Surface Metrology |
| Compliance | ISO 25178-2, ISO 4287, ISO 11562, JIS B 0601, ASME B46.1 |
| Measurement Principle | Stylus-based Inductive Displacement Sensing with Dual-Axis Scanning Mechanism |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 44DX |
| Category | Precision Geometric Measurement Instrument for Roundness and Cylindricity |
| Bearing Type | Hydrostatic Air Bearing |
| Rotational Accuracy | (0.02 + 4H/10000) µm |
| Mounting Configuration | Offset-type Chuck with 80 mm Radial Probe Offset |
| Control Mode | Manual (R44), Optional CNC Automation |
| Software Platform | TIMS (Tokyo Seimitsu Integrated Measurement System) |
| Compliance | Designed for ISO 1101, ISO 5436-1, ASME Y14.5, and JIS B 0621 conformance |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Type | Contact Profilometer / Roughness Tester |
| Model | Rondcom GRANDE DUO / GRANDE |
| Bearing Type | High-Precision Air Bearing |
| R-Axis Flexibility | Adjustable Radial Traverse for Small-to-Large Diameter Components |
| Application Focus | Roundness, Cylindricity, Surface Roughness, and Form Error Measurement of Large-Heavy Industrial Parts |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | 248881006 |
| Type | Portable Contact-Type Profilometer |
| Measurement Principle | Stylus-Based Inductive Displacement Sensing |
| Standard Compliance | ISO 4287, ISO 4288, ISO 13565, ASME B46.1, JIS B 0601 |
| Surface Parameters Measured | Ra, Rz, Ry, Rq, Rp, Rv, Rt, Rsk, Rku, Rsm, Rmr, etc. |
| Stylus Tip Radius | 5 µm (standard diamond), 2 µm (optional) |
| Stylus Force | 0.75 mN (standard), 4 mN (high-force mode) |
| Scan Length | Up to 17.5 mm (standard), extendable via multi-trace stitching |
| Vertical Resolution | 0.001 µm |
| Vertical Range | ±20 µm (standard), ±200 µm (extended range option) |
| Traverse Speed | 0.1–1.0 mm/s (adjustable) |
| Data Storage | Internal flash memory (≥10,000 profiles), USB export support |
| Power | Rechargeable Li-ion battery (≥8 h continuous operation) |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | Accretech Surface Roughness Tester |
| Pricing | Available Upon Request |
Show next