Testing Machine
Filter
Showing 1–30 of 673 results
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Max Load Capacity | 100 kg |
| Frequency Range | 1–600 Hz (standard), optional 1–5000 Hz |
| Displacement Amplitude | 0–5 mm peak-to-peak |
| Max Acceleration | 20 g |
| Vibration Axes | Vertical + Horizontal (X/Y/Z orthogonal triaxial capability) |
| Waveform | Sinusoidal, AM-modulated, Swept Sine, Logarithmic Sweep, Programmable Multi-segment Profile (up to 15 segments, max 65,500 s per segment) |
| Control Interface | RS-485 (PC-compatible, optional real-time remote control, data logging & report generation) |
| Timer/Counter | Dual-mode independent timing (1 s – 1 year) and cycle counting |
| Power Supply | 220 V / 380 V AC, 50/60 Hz |
| Motor Power | 2.2 kW / 3.8 kW |
| Worktable Dimensions | 50 cm × 50 cm (customizable up to 120 cm × 120 cm) |
| Table Material | High-strength Al-Mg alloy die-cast structure with anodized surface finish |
| Mounting Thread Protection | Stainless steel or high-tensile alloy insert sleeves for M6–M10 threaded holes |
| Isolation System | High-damping elastomeric isolator feet (resonance suppression compliant with ISO 2041 & ASTM D999) |
| Brand | OEM |
|---|---|
| Max Load Capacity | 100 kg |
| Table Surface Dimensions (L×W) | 50 × 50 cm |
| Vibration Axes | Vertical (Z) + Horizontal (X/Y) |
| Frequency Range | 1–600 Hz (optional up to 5 kHz) |
| Max Acceleration | 20 g |
| Max Displacement (p-p) | 5 mm |
| Waveform | Sinusoidal |
| Drive Power | 2.2 kW |
| Control Interface | RS-485 (external controller required) |
| Frequency Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Input Voltage | 220 V ±20% |
| Max Current | 5 A |
| Compliance | Designed for ISO 10816, ASTM D999, MIL-STD-810H vibration profile execution |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | MCT-1150 |
| Type | Electromechanical Universal Testing Machine |
| Maximum Load Capacity | 2.5 kN |
| Effective Travel | 850 mm (STB-1225L) / 550 mm (STB-1225S) |
| Crosshead Speed Range | 0.05–1000 mm/min (adjustable in 0.01 mm/min increments) |
| Speed Accuracy | ±0.5% |
| Load Measurement Accuracy | ±1% of reading (within 1/1 to 1/500 of sensor rated capacity) |
| Automatic Load Range Switching | Up to 128× |
| Load Calibration | One-touch electronic calibration with integrated sensor diagnostics |
| Overload Protection | Yes |
| Travel Limiters | Dual-position (upper/lower) mechanical stops |
| Position Resolution | 0.001 mm (≤10 mm), 0.01 mm (>10 mm) |
| Dimensions (L×H×W) | 470 × 1450 × 335 mm (STB-1225L) / 470 × 1050 × 335 mm (STB-1225S) |
| Weight | 56 kg / 43 kg |
| Power Supply | AC 100 V, 1Φ, 50/60 Hz |
| Power Consumption | 350 VA |
| Operating Environment | 5–40 °C, 20–80 % RH |
| Data Acquisition Rate | 0.2 ms (with TACT interface) |
| Display | Optional full-color touchscreen interface |
| Control | PC-based test setup and execution |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | RTF Series |
| Load Capacity Range | 1 kN to 50 kN |
| Load Accuracy | ±0.5% of reading |
| Crosshead Speed Range | 0.0005–1000 mm/min |
| Speed Accuracy | ±0.1% |
| Sampling Interval | 1 ms |
| Load Frame Rigidity Increase | 30% vs. prior generation |
| Drive System | Brushless digital servo motor with closed-loop microcomputer control |
| Force Sensor | ORIENTEC high-precision transducer |
| Lead Screw | High-accuracy backlash-free ball screw |
| Input Channels | Up to 13 analog/digital signal inputs |
| Compliance | Meets JIS B 7721 Class 0.5 (equivalent to ISO 7500-1 Class 0.5 and ASTM E4) |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Type | Electromechanical Universal Testing Machine |
| Model | RTF |
| Load Accuracy | ±0.5% of reading (1/1 to 1/500 full scale) |
| Sampling Rate | 1 ms |
| Input Channels | Up to 13 |
| Drive System | Brushless AC servo motor with vector control |
| Transmission | Preloaded precision ball screw |
| Load Cell | ORIENTEC high-accuracy strain-gauge sensor |
| Frame Rigidity | Enhanced by 30% vs. prior generation |
| Optional | Full-color capacitive touchscreen HMI |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | RTF-2 Series |
| Load Capacity Range | 25 kN – 300 kN |
| Crosshead Speed Range | 0.0005 – 1000 mm/min |
| Speed Accuracy | ±0.2% |
| Load Measurement Accuracy | ±0.5% of reading (Class 0.5) |
| Sampling Rate | 1 ms |
| Input Channels | up to 13 |
| Control System | Closed-loop microcomputer-controlled brushless digital servo |
| Safety Features | Overload protection,行程 limit switches, sampling interruption |
| Calibration | One-touch automatic range calibration |
| Structural Rigidity | 30% higher than previous generation |
| Actuation | High-precision backlash-free ball screw |
| Force Sensor | ORIENTEC high-accuracy transducer |
| Optional | Full-color touch-screen interface |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | RTF-2325 / RTF-2430 / RTF-1325 |
| Accuracy Class | 0.5 |
| Load Capacity Range | 1 kN to 300 kN |
| Test Width | 420 mm / 590 mm |
| Crosshead Speed | 0.0005–500 mm/min or 0.0005–1000 mm/min |
| Load Accuracy | ±0.5% of reading (standard), ±1% of reading (optional range) |
| Sampling Interval | 1 ms |
| Input Channels | Up to 13 |
| Display | Optional full-color capacitive touchscreen with real-time force-displacement curve plotting |
| Data Storage | ≥10 preconfigured test profiles with auto-save/resume on power cycle |
| Test Modes | Tensile, Compression, Flexural, Peel, Cyclic, Creep, Stress Relaxation |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | RTG Series |
| Load Capacity Options | 1 kN, 2.5 kN, 5 kN, 10 kN |
| Crosshead Travel (Effective) | 580–775 mm |
| Crosshead Speed Range | 0.05–1000 mm/min |
| Speed Accuracy | ±0.2% |
| Load Measurement Accuracy | ±1% of reading |
| Sampling Interval | 1 ms |
| Input Channels | up to 13 |
| Load Cell | ORIENTEC high-precision sensor |
| Drive System | Closed-loop microcomputer-controlled brushless digital servo motor |
| Transmission | High-precision backlash-free ball screw |
| Safety Features | Overload protection, dual-limit travel stops, sampling interruption |
| Calibration | One-touch automatic range calibration |
| Compliance | JIS B 7721, ISO 7500-1 Class 1, ASTM E4, ASTM D638, ASTM D3039, USP <1041>, GLP-compliant data traceability (with optional software) |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | STB Series |
| Type | Electronic Tensile Testing Machine |
| Max Load Capacity | 2.5 kN |
| Effective Travel | 850 mm (STB-1225L) / 550 mm (STB-1225S) |
| Crosshead Speed Range | 0.05–1000 mm/min |
| Speed Resolution | 0.01 mm/min |
| Speed Accuracy | ±0.5% |
| Load Measurement Accuracy | ±1% of reading (within 1/1 to 1/500 of sensor rated capacity) |
| Automatic Load Range Switching | Up to 128× |
| Load Calibration | One-touch, integrated sensor-based calibration with built-in load cell identification |
| Overload Protection | Dual-mode — electronic cut-off detection + mechanical travel limiters (upper/lower) |
| Position Resolution | 0.001 mm (≤10 mm), 0.01 mm (>10 mm) |
| Display | 6-digit digital crosshead position readout |
| Power Supply | AC 100 V, 1φ, 50/60 Hz, 350 VA |
| Operating Environment | 5–40 °C, 20–80 % RH |
| Dimensions (L×H×W) | 470 × 1450 × 335 mm (L-type), 470 × 1050 × 335 mm (S-type) |
| Weight | 56 kg (L), 43 kg (S) |
| Energy Saving | 30% reduced standby power consumption |
| Data Acquisition Rate | 0.2 ms (with TACT interface) |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | STB-1225L / STB-1225S |
| Max Load | 2.5 kN |
| Effective Stroke | 850 mm (STB-1225L) / 550 mm (STB-1225S) |
| Crosshead Speed Range | 0.05–1000 mm/min |
| Speed Resolution | 0.01 mm/min |
| Speed Accuracy | ±0.5% |
| Load Accuracy | ±1% of reading (within 1/1 to 1/500 of sensor rated capacity) |
| Auto Range Switching | up to 128× |
| Load Calibration | one-button sensor-integrated calibration with sensor identification |
| Overload Protection | yes |
| Travel Limiters | dual (upper/lower) |
| Dimensions (L×H×W) | 470×1450×335 mm (L) / 470×1050×335 mm (S) |
| Weight | 56 kg (L) / 43 kg (S) |
| Power Supply | AC 100 V, 1Φ, 50/60 Hz, 350 VA |
| Operating Environment | 5–40 °C, 20–80 %RH |
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Manufactured in Taiwan |
| Model | Abrasion Tester 339 |
| Pricing | Available Upon Request |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Key | Brand: AcroEdge |
|---|---|
| Model | Stency |
| Origin | Imported |
| Force Range | 1–20 N (configurable) |
| Force Accuracy | ±0.1% F.S. |
| Displacement Resolution | 0.01 mm |
| Maximum Stroke | 60 mm (uniaxial) |
| Positioning Accuracy | ±0.02 mm |
| Test Speed | 0.1–100 mm/s |
| Data Acquisition Rate | 10 Hz (100 ms interval) |
| Max Data Points per Test | 60,000 |
| Sample Width | up to 50 mm (biaxial), 30 mm (uniaxial) |
| Sample Length | ≥5 mm + gauge length |
| Power Supply | AC 100 V ±10%, 2–3 A |
| Operating Temperature | 0–40 °C |
| Compliance | Designed for ASTM D638, ISO 527, and ISO 11843-compliant tensile evaluation of micro-scale specimens |
| Brand | AcroEdge |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Syclus |
| Instrument Category | Compact Vibration-Based Fatigue Tester |
| Frequency Range | 1–20 Hz |
| Maximum Displacement Amplitude | ±600 µm |
| Load Capacity | ±25 N (±0.5% nonlinearity) |
| Sample Dimensions | Length 25–35 mm |
| Geometry | Films, Fibers, Thin Specimens |
| Control Interface | USB-connected PC with Dedicated Software |
| Sampling Rate | Up to 2000 pts/sec |
| Data Storage Modes | Linear (N cycles per T minutes) or Logarithmic (10, 100, 1000, …, 10ⁿ cycles) |
| Failure Detection | Programmable load threshold trigger with pre-failure cycle preservation (3 cycles prior to failure) |
| System Dimensions (Tester) | L100 × W100 × H500 mm (vertical orientation) |
| Controller Dimensions | L250 × W250 × H150 mm |
| Tester Mass | ~3 kg |
| Controller Mass | ~5 kg |
| Power Supply | 100 V, 10 A |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | DST-80kV |
| Breakdown Voltage Range | 0–80 kV AC (adjustable) |
| Voltage Accuracy | ±1% |
| Electrode Gap | 2.5 mm (calibrated with feeler gauge, tolerance ±0.1 mm) |
| Standard Electrodes | 12.5–13 mm diameter disc electrodes (brass or stainless steel, polished) |
| Test Cup Material | IEC 60156-compliant ceramic or borosilicate glass |
| Cup Capacity | ~500 mL |
| Rise Rate | 0.5–5.0 kV/s (programmable) |
| Trip Current Threshold | 5 mA |
| Power Consumption | ≤200 W |
| Safety Interlock | Door-activated high-voltage cutoff |
| Grounding Resistance Requirement | ≤4 Ω |
| Compliance | IEC 60156:2025, ASTM D1816, GB/T 507–2002, DL/T 846.7–2004 |
| Brand | Aerospace Longitudinal |
|---|---|
| Origin | Beijing, China |
| Model | ZJC-20KV Dielectric Strength Tester |
| Maximum Output Voltage | 20 kV AC/DC |
| Input Power | 220 V, 50–60 Hz |
| Voltage Ramp Rate | 0.05–5 kV/s (continuously adjustable) |
| Protection Response Time | <10 ms (main circuit breaker), <50 µs (solid-state backup) |
| Leakage Current Range | 1–100 mA (software-configurable) |
| Overcurrent Trip Range | 1–60 mA |
| Ripple Factor | ≤2% |
| Test Capacitance Options | 100 pF @ 20 kV, 100 pF @ 50 kV, 100 pF @ 100 kV, 100 pF @ 150 kV |
| Operating Temperature Range (Environmental Chamber) | –70 °C to +300 °C |
| Partial Discharge Sensitivity | 0.1 pC |
| Thermal Monitoring Accuracy | ±1 °C |
| Compliance | IEC 60270, IEC 60664, GB/T 1408.1, GB/T 1695, JJG 1005 |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | ZDH-20kV |
| Breakdown Voltage | 20 kV |
| Compliance Standards | IEC 61621, ASTM D495, GB/T 1411 |
| Electrode Spacing | 4 mm or 6.35 mm (adjustable) |
| Arc Current Range | 10–40 mA |
| Output Voltage | AC/DC, 0–20 kV |
| Safety Features | Interlocked arc chamber, emergency stop, grounding resistance ≤2 Ω |
| Calibration Interval | Semi-annual (±2% voltage accuracy) |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZH-50KV |
| Breakdown Voltage Range | 0–50 kV (AC/DC/Impulse) |
| Output Capacity | ≥10 kVA (compliant with GB/T 1408.1) |
| Voltage Accuracy | ≤1.5% FS (standard), optional ≤0.5% FS |
| Ramp Rate | 0.1–5 kV/s (adjustable), optional 0.01–10 kV/s (stepless) |
| Breakdown Detection Sensitivity | 0.1 mA (standard), optional 0.01 mA |
| Data Storage | 100 test records (standard), optional 1000+ with cloud backup |
| Safety Compliance | Triple Interlock Protection (door interlock, overcurrent cutoff ≤0.1 s, emergency stop), grounding resistance ≤4 Ω, discharge rod included |
| Environmental Options | Ambient (15–40 °C, RH ≤70%), optional high-temp chamber (RT to 200 °C, ±1 °C), optional low-temp chamber (−70 °C), oil-immersion testing (25# transformer oil, oil bath available) |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | ZJC-100KV |
| Maximum Output Voltage | 100 kV AC/DC |
| Voltage Accuracy | ≤ ±1% |
| Ramp Rate | 0.01–5.0 kV/s (adjustable) |
| Current Detection Threshold | 1–30 mA (configurable) |
| Trip Response Time | ≤ 0.1 s |
| Data Sampling Rate | 500 Hz |
| Test Media | Air, Insulating Oil |
| Standard Electrode Diameters | 6 mm, 25 mm, 75 mm |
| Power Rating | Up to 10 kVA |
| Hold Time Range | 0–8 h |
| Compliance | IEC 60243-1, IEC 60243-2, GB/T 1408.1, GB/T 1408.2, ASTM D149, ASTM D877 |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | ZJC-100KV |
| Price Range | USD 7,000 – 21,000 (FOB) |
| Maximum Output Voltage | 100 kV |
| Voltage Ramp Rate | 0.5–5 kV/s (continuously adjustable) |
| Voltage Measurement Range | 0–100 kV |
| Voltage Resolution | 1 V (10-bit A/D) |
| Breakdown Current Range | 0.1–100 mA |
| Current Accuracy | ±1% FS |
| Overvoltage Protection Threshold Accuracy | ±5% |
| Overcurrent Response Time | <1 ms |
| Flashover Auto-Restart Delay | 0–60 s (adjustable) |
| Safety Interlock Compliance | IEC 61010-1 |
| Data Sampling Rate | 500 Hz |
| Output Formats | CSV (raw), PDF (standard report) |
| Environmental Operating Conditions | 25±5°C, ≤65% RH |
| Electrode Material | Tungsten-Copper |
| Recommended Electrode Maintenance | Polishing with #800 grit sandpaper after every 50 tests |
| Transformer Oil Service Interval | Filtration required after 500 operating hours |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | ZJC-100KV |
| Max Output Voltage | 100 kV (AC/DC) |
| Input Voltage | AC 220 V ±10%, 50 Hz |
| Power Rating | 5 kVA |
| Voltage Regulation | Continuous, stepless (0–3000 V/s) |
| Voltage Measurement Accuracy | ≤ ±1% |
| Test Environments | Air or Transformer Oil Immersion |
| Safety Response Time | ≤ 0.01 s for overcurrent cutoff |
| Operating Temperature | 15–30 °C |
| Relative Humidity | 0–85% RH (non-condensing) |
| Compliance | GB 1408.1–2006, GB 1408.2–2006, GB/T 1695–2005, GB/T 3333, GB 12656, ASTM D149, ASTM D876, DIN 53481, IEC 60243, UNI 4291 |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | ZJC-100KV |
| Max Output Voltage | 100 kV AC/DC |
| Voltage Measurement Range | 0–100 kV (AC/DC) |
| Voltage Accuracy | ±1.5% (10–100% of full scale) |
| Rise Rate Adjustment | 0.1–3 kV/s (continuously variable, no gear shifting) |
| Test Modes | Ramp-up, Step-up, and Hold (with programmable dwell time up to 4 h, extendable per DIN/VDE/IEC conventions) |
| Power Rating | 10 kVA |
| Overcurrent Protection | 1–30 mA (software-configurable) |
| Safety Features | Nine-level interlock system including overvoltage cutoff, door interlock, automatic discharge post-test, zero-voltage reset, independent grounding, short-circuit detection, and software operation validation |
| Dimensions (L×W×H) | 2100 × 1500 × 2100 mm |
| Net Weight | 1800 kg |
| Compliance | GB 1408.1–2006, GB 1408.2–2006, GB/T 1695–2005, ASTM D149, GB/T 3333, GB/T 12656, HG/T 3330 |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | ZJC-100KV |
| Maximum Test Voltage | 100 kV AC/DC |
| Voltage Accuracy | ≤2% |
| Rise Rate Range | 0.01–5 kV/s (adjustable in real time) |
| Test Modes | AC/DC, stepwise ramp, withstand, breakdown |
| Electrode Options | 6 mm sphere, 25 mm & 75 mm flat disc electrodes |
| Test Medium | air or insulating oil |
| Safety Protection | 9-level interlocked protection system |
| Power Rating | 10 kVA |
| Compliance | GB/T 1408.1–2016, GB/T 1408.2–2006, GB/T 1695–2005, ASTM D149–2023 |
| Software | PC-based control with real-time curve plotting, automatic breakdown detection, data logging, audit trail, and multi-sample parallel testing capability |
| Dimensions (L×W×H) | 1900 × 1300 × 1700 mm |
| Weight | 200 kg |
| Warranty | 3 years comprehensive, lifetime technical support |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | ZJC-100KV |
| Maximum Output Voltage | 100 kV |
| Compliance | GB/T 1408.1–2016, IEC 60243-1, ASTM D149 |
| Test Modes | Short-time, Stepwise (20 s/60 s), Ramp (120–600 s), Proof Testing |
| Electrode Configurations | Coaxial cylindrical, spherical, parallel plate, rod-to-rod, foil-wrapped tubular, and custom fixtures per ISO/IEC standards |
| Voltage Regulation Accuracy | ≤ ±2% of set value |
| Rise Time Control | Adjustable from 1 V/s to 5000 V/s |
| Measurement Uncertainty | ≤ ±3% (kV), traceable to national metrology standards |
| Safety Interlocks | Dual-channel overcurrent cutoff (<5 ms response), ground-fault detection, door-activated HV disable, arc-quenching chamber |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | ZJC-100KV |
| Output Voltage | AC/DC 0–100 kV |
| Output Power | 5 kVA |
| Voltage Measurement Accuracy | ≤ ±2% |
| Ramp Rate | 0.1–10 kV/s |
| Withstand Test Voltage Range | 10–100 kV (continuously adjustable) |
| Withstand Duration | 0–4 h (no-current condition) |
| Input | 220 V ±10%, 50 Hz ±1% |
| Dimensions (L×W×H) | 700 × 800 × 1650 mm |
| Weight | 100 kg |
| Operating Temperature | 15–30 °C |
| Relative Humidity | 30–85% RH |
| Grounding Resistance Requirement | ≤ 4 Ω |
| Short-Circuit & Overcurrent Protection Response Time | ≤ 0.1 s |
| Compliance | GB 1408.1–2006, GB 1408.2–2006, GB/T 1695–2005, ASTM D149 |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | ZJC-100KV |
| Maximum Output Voltage | 100 kV |
| Compliance Standards | IEC 60243-1, ASTM D149, GB/T 1408.1, ISO 60243 |
| Voltage Regulation Accuracy | ±1% of full scale |
| Rise Rate Control | Adjustable from 0.1 to 5.0 kV/s (linear or stepwise) |
| Current Detection Range | 0.1 μA to 100 mA |
| Electrode Alignment Tolerance | ≤0.1 mm |
| Safety Certification | IEC 61010-1, CAT III 1000 V |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | ZJC-100KV |
| Breakdown Voltage Range | 0–100 kV (AC/DC) |
| Voltage Accuracy | ≤1% |
| Test Media | Air or Insulating Oil |
| Electrode Options | 25 mm, 75 mm, 6 mm (spherical, disk, rod configurations) |
| Power Capacity | 5 kVA or 10 kVA |
| Rise Rate | 10 V/s – 5 kV/s (continuously adjustable) |
| Safety Protection | 9-level interlocked protection system |
| Compliance | GB/T 1408.1–2006, GB/T 1695–2005, GB/T 3333–1999, ASTM D149, ASTM D3755, IEC 60243-1 |
| Dimensions (Standard) | 700 × 800 × 1300 mm (L×W×H), 100 kg |
| Dimensions (Large) | 1900 × 1300 × 1700 mm (L×W×H), 200 kg |
| Input Voltage | 220 V AC, 50/60 Hz |
| Maximum Hold Time | 8 hours |
| Data Interface | Optical-isolated acquisition, Bluetooth remote control |
| Software | Windows-based test management with real-time curve plotting, audit trail, export to Excel/Word, user access control, and GLP-compliant reporting |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | ZJC-150KV |
| Output Voltage | AC/DC 0–150 kV |
| Measurement Range | AC/DC 15–150 kV |
| Accuracy | ≤ ±2% |
| Ramp Rate | 1–5 kV/s |
| Hold Time | 0–4 h |
| Leakage Current Setting | 1–30 mA (software-controlled) |
| Input Power | AC 220 V ±10%, 50 Hz ±1% |
| Output Power | 15 kVA |
| Dimensions (L×W×H) | 1980 × 1220 × 1750 mm |
| Weight | 350 kg |
| Operating Environment | 15–30 °C, RH ≤ 85% |
| Grounding Requirement | Dedicated earth electrode ≥1.5 m depth |
| Compliance | GB 1408.1–2006, GB 1408.2–2006, GB/T 1695–2005, GB/T 3333, HG/T 3330, GB 12656, ASTM D149 |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | ZJC-150KV |
| Output Voltage | AC/DC 0–150 kV |
| Measurement Range | AC/DC 15–150 kV |
| Accuracy | ≤1% |
| Ramp Rate | 0.01–5 kV/s |
| Hold Time | 0–8 h |
| Leakage Current Setting | 1–30 mA |
| Input | AC 220 V ±10%, 50 Hz ±1% |
| Power Output | 15 kVA |
| Dimensions (L×W×H) | 1980 × 1220 × 1750 mm |
| Weight | 350 kg |
| Environmental Operating Range | 15–30 °C, RH ≤85% |
| Grounding Requirement | Dedicated earth electrode ≥1.5 m depth |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | ZJC-150KV |
| Maximum Output Voltage | 150 kV |
| Voltage Ramp Rate | 0.1–3 kV/s (adjustable) |
| Electrode Configuration | 12.5 mm polished spherical electrodes (Ra ≤ 0.2 µm), fixed gap 2.5 mm ± 0.05 mm |
| Breakdown Current Threshold | 1–100 mA (programmable), response time ≤ 10 µs |
| Temperature Control | Integrated oil bath, stability ±1 °C at 25 °C |
| Humidity Limit | <70 % RH in test chamber |
| Compliance | IEC 60156, ASTM D877, GB/T 507, GB 2536 |