Shimadzu Used GCMS-QP2010 Gas Chromatography-Mass Spectrometry System (Red-Black Label)

Overview

The Shimadzu GCMS-QP2010 is a high-performance gas chromatography-mass spectrometry (GC-MS) system originally engineered for routine and research-grade organic compound identification, quantification, and structural elucidation. As a quadrupole-based benchtop mass spectrometer coupled with a capillary gas chromatograph, it operates on electron ionization (EI) mode with optional chemical ionization (CI) capability, delivering reliable spectral reproducibility and robust compound library matching (NIST, Wiley). The “Red-Black Label” designation indicates factory-certified refurbished status—fully reconditioned by Shimadzu-authorized service centers in Japan, including detector recalibration, ion source cleaning, vacuum system validation, and full functional verification per Shimadzu’s internal QC protocol. Designed for laboratories requiring regulatory-compliant trace analysis without the capital expenditure of new instrumentation, this used system retains full hardware compatibility with Shimadzu’s ClassAnalyst™ and GCMSsolution™ software platforms.

Key Features

• Quadrupole mass analyzer with unit mass resolution (0.5–1.0 u), mass range 1.5–1024 u
• Electron ionization (70 eV) source with optional CI module for soft ionization of thermally labile compounds
• Auto-tuning and automatic gain control (AGC) for consistent sensitivity across extended run times
• High-vacuum turbomolecular pump system (≥210 L/s) ensuring stable baseline and low noise detection
• Integrated split/splitless injector with programmable temperature ramping (up to 450 °C)
• Support for multi-dimensional GC (MDGC) via Multi-Deans Switching (MDS) configuration—enabling heart-cutting and comprehensive two-dimensional separation when interfaced with compatible GC modules
• Compliance-ready architecture: supports audit trail, user access levels, and electronic signature functionality when operated under GCMSsolution™ with 21 CFR Part 11 add-on module

Sample Compatibility & Compliance

The GCMS-QP2010 accommodates volatile and semi-volatile organic compounds (VOCs/SVOCs) across environmental, pharmaceutical, food safety, and petrochemical applications. It accepts standard 0.25–0.53 mm ID fused-silica capillary columns (e.g., DB-5ms, HP-5MS, Rxi-5Sil MS) and supports both direct injection and thermal desorption interfaces. Method development aligns with ASTM D5845 (petroleum hydrocarbons), EPA Method 8270D (semivolatiles), and ISO 17993 (residue analysis in food). All refurbished units undergo full compliance verification—including leak rate testing (<1×10⁻⁸ atm·mL/s), mass calibration stability over 48 h, and retention time repeatability (RSD < 0.05% for n-alkanes C8–C20 under standardized conditions).

Software & Data Management

Operates exclusively with Shimadzu’s GCMSsolution™ v2.x or later—providing integrated instrument control, real-time data acquisition, spectral deconvolution (AIA format), and quantitative report generation. The software supports method validation templates compliant with ICH Q2(R2), GLP, and GMP documentation requirements. Audit trail logs record all parameter changes, sequence modifications, and raw data exports with timestamped user attribution. Data files are stored in .qgd format (Shimadzu native) and exportable to open formats (mzXML, .cdf) for third-party processing. Remote monitoring and secure data backup are enabled via optional LAN/WAN integration.

Applications

• Environmental analysis: PAHs, PCBs, organochlorine pesticides, phthalates, and brominated flame retardants in soil, water, and air samples
• Petrochemical profiling: Hydrocarbon group-type analysis (saturates, aromatics, resins, asphaltenes) in crude oil and refined fuels
• Food & flavor chemistry: Off-flavor compound identification, adulterant screening (e.g., olive oil authenticity), and enantiomeric ratio determination using chiral columns
• Pharmaceutical impurity profiling: Identification and quantification of genotoxic impurities at sub-ppm levels per ICH M7 guidelines
• Forensic toxicology: Screening and confirmation of drugs of abuse and metabolites in biological matrices

FAQ

Is this GCMS-QP2010 fully refurbished and certified?

Yes. Each unit undergoes Shimadzu Japan’s official refurbishment process, including ion source replacement, detector aging compensation, vacuum integrity verification, and full performance qualification against factory specifications.
Does it support 21 CFR Part 11 compliance?

Yes—when configured with GCMSsolution™ v4.3+ and the Part 11 Add-on License, it provides electronic signatures, role-based access control, and immutable audit trails required for FDA-regulated environments.
Can it be upgraded to support MDGC configurations?

Yes. The system architecture supports optional Deans switch modules and dual-column oven configurations; hardware compatibility must be confirmed during pre-purchase technical review.
What warranty and service support is included?

All units ship with a 12-month limited hardware warranty and remote diagnostic support. On-site service is available through Shimadzu-authorized partners in North America, Europe, and APAC regions.
Are original operation manuals and software installation media provided?

Yes—digitally delivered PDF manuals and licensed software installation packages (with valid activation keys) are included with each shipment.