RephiLe Genie R Series Laboratory Reverse Osmosis (RO) Pure Water System
| Brand | RephiLe |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | Genie R |
| Price Range | USD 7,000 – 14,000 (FOB Shanghai) |
| Purified Water Grade | ASTM Type III / ISO 3696 Grade 3 |
| Conductivity (@25 °C) | < 20 µS/cm (typical, with feed water < 500 µS/cm) |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Total Organic Carbon (TOC) | < 30 ppb |
| Microbial Count / Endotoxin | < 0.001 EU/mL |
| Particles (>0.1 µm) | < 1 particle/mL |
| RO Production Flow Rates | 12 / 24 / 32 L/h |
| RO Dispense Flow Rate | 0–2 L/min |
| Feed Water Requirements | Conductivity/TDS < 2000 µS/cm / < 1000 ppm |
| Temperature | 5–35 °C |
| Pressure | 0.1–0.6 MPa (1–6 bar) |
| Dimensions (H×W×D) | 54 × 32 × 44 cm (main unit) |
| UV Wavelength | 265 nm (UVC LED, mercury-free) |
Overview
The RephiLe Genie R Series is a modular, laboratory-grade reverse osmosis (RO) pure water system engineered for consistent, low-maintenance production of ASTM Type III and ISO 3696 Grade 3 purified water. Designed for integration into centralized or distributed lab water infrastructures, the Genie R serves as a primary purification stage—delivering high-recovery RO water with stable flow rates across variable ambient conditions. Its core architecture leverages proven thin-film composite (TFC) RO membranes coupled with intelligent pre-treatment sequencing using AC Pack (activated carbon) and P Pack (polyphosphate scale inhibitor) cartridges. This staged protection minimizes fouling and scaling on both the RO membrane and downstream EDI modules (when used in hybrid configurations), extending service life and ensuring long-term reproducibility. The system operates without chemical regeneration, aligning with green laboratory initiatives and reducing operational overhead.
Key Features
- Stable RO output flow rates of 12, 24, or 32 L/h—maintained independently of inlet temperature fluctuations via adaptive pump control and thermal compensation algorithms.
- “1+N” modular architecture: A single Genie R main unit supports up to 10 wireless dispenser handles (expandable), enabling simultaneous access points across multi-user labs or open-bench environments.
- Integrated sensor interface: Supports real-time analog/digital input from external analytical probes—including pH, dissolved oxygen (DO), turbidity, and conductivity sensors—with data synchronized to the central touchscreen display for unified reporting.
- Mercury-free UVC LED irradiation (265 nm) within the integrated water tank provides continuous microbial suppression, validated for >4-log reduction of Gram-negative and Gram-positive bacteria per ISO 14644-1 Class 5 cleanroom-compatible operation.
- Non-contact, capacitive touch screen with glove-compatible sensitivity—operable with wet hands or standard nitrile/latex gloves—eliminates cross-contamination risk during routine dispensing.
- Continuous ultrasonic liquid-level monitoring enables precise volume tracking and predictive refill alerts; no mechanical float switches or optical sensors subject to drift or biofilm interference.
- Automatic maintenance routines include programmable chlorine wash (for organic foulant removal) and pH-adjusted cleaning cycles (for carbonate/scale dissolution), configurable via the embedded HMI.
Sample Compatibility & Compliance
The Genie R is validated for continuous generation of purified water compliant with multiple international standards: ASTM D1193 Type III, ISO 3696 Grade 3, and EP/USP Purified Water monographs (where used as feedwater for subsequent distillation or ultrafiltration stages). Its TOC < 30 ppb, endotoxin < 0.001 EU/mL, and sub-particle-count performance (0.1 µm) meet baseline requirements for non-critical cell culture media preparation, buffer formulation, and instrument feedwater (e.g., clinical chemistry analyzers, autoclaves, washer-disinfectors). The system’s leak-detection circuitry and automatic shutdown protocol satisfy IEC 61000-6-2 electromagnetic compatibility and IEC 61000-6-4 emission requirements. All firmware logs—including alarm history, maintenance timestamps, and sensor calibration events—are timestamped and stored locally for GLP/GMP audit readiness.
Software & Data Management
The Genie R features an embedded Linux-based controller with a 7-inch capacitive HMI running RephiLe’s proprietary AquaView OS. All operational parameters—including real-time conductivity, TOC (when interfaced), UV intensity, tank level, and cumulative volume dispensed—are logged at 1-minute intervals and exportable via USB or optional Ethernet/Wi-Fi module. Audit trails comply with FDA 21 CFR Part 11 principles: user authentication (role-based access), electronic signatures for critical actions (e.g., calibration confirmation), and immutable log files protected against tampering. Optional cloud connectivity enables remote diagnostics, predictive service alerts, and fleet-wide water quality benchmarking across multi-site installations.
Applications
- Preparation of microbiological growth media, PBS, Tris-HCl, and other low-sensitivity buffers.
- Feedwater supply for downstream ultrapure water systems (e.g., Genie G series), steam generators, and high-pressure cleaning equipment.
- Instrument feed applications including hematology analyzers, immunoassay platforms, and automated tissue processors.
- Pharmaceutical manufacturing support: Purified water generation for non-sterile API synthesis steps, equipment rinsing, and environmental monitoring sample dilution.
- Academic teaching labs requiring robust, low-intervention water infrastructure with scalable access points.
FAQ
What feed water quality is required for optimal Genie R performance?
City-supplied tap water meeting local regulatory standards is sufficient. Maximum feed conductivity must not exceed 2000 µS/cm (TDS < 1000 ppm), with inlet temperature between 5–35 °C and pressure maintained at 0.1–0.6 MPa.
Can the Genie R be integrated into existing lab water networks?
Yes—the system supports both standalone operation and connection to pressurized loop distribution systems via optional booster pump and backpressure regulation kits.
Is validation documentation available for GMP environments?
RephiLe provides IQ/OQ protocols, traceable calibration certificates for onboard sensors, and material compliance statements (USP Class VI, RoHS, REACH) upon request.
How often do the AC Pack and P Pack cartridges require replacement?
Under typical municipal feed water conditions (conductivity ~300–500 µS/cm), AC Pack replacement is recommended every 6 months and P Pack every 12 months—both monitored via integrated usage counters and alert thresholds.
Does the Genie R support third-party TOC analyzers?
Yes—via 4–20 mA or Modbus RTU interfaces, enabling direct integration with commercial online TOC monitors for continuous verification per USP and EP 2.2.44 guidelines.
