Titan SCY-60 60-Gallon (227 L) Flammable Liquid Safety Cabinet

Overview

The Titan SCY-60 is a UL-listed and FM-approved 60-gallon (227 L) flammable liquid safety cabinet engineered for secure, code-compliant storage of Class I flammable liquids in laboratories, pharmaceutical manufacturing facilities, chemical R&D centers, and industrial QC environments. Designed in accordance with NFPA 30 (Flammable and Combustible Liquids Code), OSHA 29 CFR 1910.106, and ANSI Z358.1 standards, the cabinet features double-walled 18-gauge steel construction with a 1.5-inch air gap for thermal insulation and fire resistance. Its self-closing, three-point latching doors activate automatically at 165 °F (74 °C) via fusible links—meeting the 10-minute fire endurance requirement per UL 1275. The unit is fully grounded via integrated copper grounding lug and conductive static-dissipative shelving to prevent electrostatic discharge ignition hazards.

Key Features

• Double-wall 18-gauge welded steel construction with 1.5″ insulating air space for structural integrity and fire-rated performance
• Self-closing, three-point latched doors with factory-installed 165 °F (74 °C) fusible links compliant with UL 1275 fire testing protocol
• Conductive, adjustable steel shelves with anti-roll lips and static-dissipative coating (surface resistivity: 10⁶–10⁹ Ω/sq)
• Integrated grounding system including 10 AWG copper grounding wire and brass grounding lug—pre-wired and tested
• Leak-proof 2-inch deep sump tray capable of retaining ≥100% of the largest container volume plus 10% additional capacity (per NFPA 30 Section 9.5.2)
• High-visibility hazard warning labels conforming to ANSI Z535.4 and GHS pictograms (flammable liquid, exclamation mark, health hazard)
• Door-mounted leveling feet and rear ventilation ports (optional ducting-ready configuration available)

Sample Compatibility & Compliance

The SCY-60 accommodates standard 1-, 4-, and 5-gallon metal or UN-rated polyethylene safety cans, as well as 30- and 55-gallon drums (with optional drum support kit). All internal components—including shelf supports, hinges, and latches—are non-sparking and corrosion-resistant. The cabinet meets mandatory regulatory requirements for installation in U.S. and Canadian workplaces, including NFPA 30 Chapter 9, OSHA 1910.106(d)(2), and CSA B680. It is also compatible with GLP/GMP facility documentation protocols, supporting audit-ready recordkeeping when paired with facility EHS management systems. While not certified for use in classified hazardous locations (Class I, Div 1), it is suitable for general laboratory and warehouse areas where vapor accumulation is controlled via mechanical ventilation.

Software & Data Management

As a passive containment device, the SCY-60 does not incorporate embedded electronics or software. However, it is fully interoperable with enterprise-level EHS platforms (e.g., Intelex, ETQ Reliance, Sphera) via standardized asset tagging (QR-coded serial plate included). Each unit ships with a traceable Certificate of Conformance (CoC) listing material certifications, weld inspection records, and third-party test reports (UL 1275, FM 6050). Optional accessories include RFID-enabled door status sensors and Bluetooth temperature/humidity loggers (model SCY-ENV-LOG), which generate CSV-exportable audit trails compliant with FDA 21 CFR Part 11 for electronic record retention.

Applications

• Secure storage of acetone, ethanol, hexane, toluene, and other Class Ia/Ib solvents in analytical chemistry labs
• Intermediate holding of flammable reagents during API synthesis and formulation development under cGMP conditions
• Point-of-use solvent storage adjacent to fume hoods, HPLC systems, or coating lines to minimize transfer distances and exposure risk
• Compliant staging area for flammable liquid inventory in university teaching labs and vocational training centers
• Backup containment for spill response kits and secondary containment pallets in distribution hubs

FAQ

Is the SCY-60 certified to UL 1275 and FM 6050?

Yes—each unit carries both UL and FM marks verified by independent testing laboratories; certificates are provided with shipment.
Can this cabinet be installed in a corridor or exit path?

No—per NFPA 30 Section 9.5.3, flammable liquid cabinets must not obstruct egress routes or be placed within 36 inches of exits, stairways, or HVAC intakes.
Does the cabinet require external ventilation ducting?

Not required by code for typical lab use, but optional rear ventilation ports allow connection to dedicated exhaust systems if local AHJ mandates vapor control.
What maintenance is recommended for long-term compliance?

Quarterly visual inspection of door latches, fusible links, grounding continuity (≤25 ohms), and sump integrity; annual third-party verification recommended for GMP-regulated sites.
Is custom labeling or OEM branding available?

Yes—Titan offers ISO 9001-certified label customization (ANSI/GHS bilingual, facility-specific hazard icons) and white-label options for distributors and integrators.