Beiguang Jingyi BN-10KN Universal Tensile Testing Machine

Overview

The Beiguang Jingyi BN-10KN Universal Tensile Testing Machine is a statically loaded electromechanical testing system engineered for precision mechanical characterization of metallic and non-metallic materials under uniaxial tension, compression, bending, peel, shear, and elongation modes. It operates on the principle of controlled displacement actuation via a high-torque servo-motor-driven ball screw assembly, with force feedback acquired through a calibrated 10 kN load cell compliant with ISO 7500-1 Class 0.5 and ASTM E4 traceable calibration protocols. The machine supports full-range mechanical property quantification—including tensile strength, yield strength (upper/lower), Young’s modulus, elongation at break, Poisson’s ratio, tear resistance, peel adhesion, and flexural rigidity—across standardized specimen geometries per ISO 527, ASTM D638, ASTM D790, ISO 178, GB/T 1040, and other international material testing standards.

Key Features

• High-fidelity 24-bit analog-to-digital conversion with 200 Hz sampling rate ensures robust signal integrity and minimal noise interference during dynamic loading.
• Seven-range automatic force amplification (×1, ×2, ×5, ×10, ×20, ×50, ×100) enables seamless transition across low-force polymer testing and high-load metal evaluation without manual range switching.
• Pulse Command digital control architecture delivers precise velocity regulation from 0.01 to 500 mm/min, with programmable acceleration/deceleration profiles for reproducible ramp-hold-step sequences.
• Dual-mode crosshead adjustment: coarse positioning via motorized rapid traverse and fine micrometer-style manual tuning for accurate specimen alignment.
• Integrated safety subsystems include dual-limit mechanical行程 stops, overload emergency cutoff, leakage-current protection, and auto-stop-on-fracture functionality compliant with EN ISO 12100 risk assessment requirements.
• Optimized mechanical rigidity: heavy-duty cast-iron base, reinforced upright columns, and preloaded linear guide rails minimize frame deflection (<0.02 mm/kN) during high-stress testing.

Sample Compatibility & Compliance

The BN-10KN accommodates specimens ranging from thin films (≥10 µm thickness) to structural alloys (up to 25 mm diameter rods), with customizable fixture interfaces—including wedge-action tensile grips, pneumatic clamps, 90°/180° peel fixtures, three-point bending jigs, and compression platens. Standard test width (350 mm) and crosshead travel (950 mm) support ASTM E8, ISO 6892-1, and GB/T 228.1 specimen configurations. Optional extensometers (contact-type clip-on or non-contact video-based) enable strain measurement per ISO 9513 Class 1 accuracy. The system meets electromagnetic compatibility (EMC) per IEC 61326-1 and electrical safety per IEC 61010-1, and is designed for GLP/GMP environments with optional audit-trail-enabled software configuration.

Software & Data Management

UTM107 v4.x testing software (Windows XP–11 compatible) provides modular standard compliance—preloaded templates for ASTM, ISO, DIN, JIS, BS, and GB series—enabling one-click test method selection and parameter auto-configuration. Real-time plotting supports synchronized multi-curve display (load-displacement, stress-strain, load-time, displacement-time), with Auto Scale and dynamic zoom. Data export includes native .csv, .xlsx, and .pdf report generation; all raw channel data (load, displacement, time, extensometer output) is timestamped and stored with metadata (operator ID, sample ID, environmental conditions). Software features full 21 CFR Part 11 readiness: electronic signatures, role-based access control, immutable audit trails, and encrypted database backup. Language support includes English, Simplified Chinese, and Traditional Chinese.

Applications

This system serves QC/QA laboratories in polymer compounding, wire & cable manufacturing, medical device R&D, automotive component validation, packaging engineering, textile performance testing, and academic materials science. Typical use cases include: tensile evaluation of thermoplastic elastomers per ASTM D412; peel strength of pressure-sensitive adhesives per ASTM D903; flexural modulus of CFRP laminates per ISO 14125; compression yield of foams per ISO 3386; and cyclic fatigue pre-conditioning per ISO 1099. Its modular design allows integration with environmental chambers (−70°C to +300°C), humidity controllers, and digital image correlation (DIC) systems for advanced deformation analysis.

FAQ

Is the BN-10KN compliant with ISO/IEC 17025 calibration requirements?
Yes—the load cell and displacement encoder are supplied with NIST-traceable calibration certificates, and the system supports periodic verification per ISO/IEC 17025 Clause 6.5.2.

Can the machine perform cyclic loading tests?
Yes—software-defined waveform control (sine, triangle, trapezoidal) enables fatigue and hysteresis testing up to 5 Hz with closed-loop load or displacement control.

What extensometer options are available?
Standard contact-type clip-on extensometers (gauge lengths 10–50 mm, accuracy ±0.5%); optional non-contact video extensometry (resolution 1 µm, field-of-view adjustable) for brittle or temperature-sensitive samples.

Does the system support third-party instrument integration?
Yes—RS232 and USB virtual COM port interfaces allow synchronization with thermal cameras, environmental chambers, or spectroscopic analyzers via custom SCPI or Modbus RTU protocols.

Is remote monitoring and troubleshooting supported?
Yes—optional Ethernet module enables secure remote desktop access, real-time dashboard viewing, and automated email alerts for test completion or fault conditions.