- All
- Favorite
- Popular
- Most rated
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | BOR-3000 |
| Application | Friction and Wear Testing |
| Compliance | ASTM D3704, D2509, D2782, D2981, G77, G176 |
| Max Load | 10,000 N |
| Max Speed | 5000 rpm |
| Temp Range | Up to 500 °C |
| Torque Measurement | In-line high-resolution |
| Test Modes | Continuous, Reciprocating, Stepped Load, Oscillatory |
| Sample Mounting | Modular block holder for shafts, bearings, seals, rings, thrust/conical rollers |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | TTQ-1000 |
| Application | Tribological Evaluation of Cutting, Threading & Drilling Lubricants |
| Measurement Principle | In-situ Rotational Torque + Acoustic Emission + Electrical Contact Resistance + Environmental Temperature Monitoring |
| Sample Types | Aluminum, Steel, and Other Machinable Metals |
| Test Modes | Automated Multi-position Tapping, Drilling, and Milling Simulation |
| Compliance Context | Supports ASTM D3702, ISO 20623, and GLP-aligned data integrity requirements |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | FBT-1000 |
| Test Types | EP (Extreme Pressure) and Wear Testing |
| Temperature Range | –40 °C to 200 °C (optional up to 400 °C) |
| Maximum Load | 12,000 N |
| Rotational Speed | Up to 1800 rpm |
| Real-time Monitoring | Torque, Load, Temperature, Acoustic Emission, Friction Coefficient |
| Compliance | ISO 12583, ASTM D2266, D2596, D2783, D4172, DIN 51350, BS EN ISO 20623, CEC L-45-A-99 |
| Sample Compatibility | Lubricating oils, greases, additives, solid lubricants |
| Data Resolution | Sub-micron wear scar measurement via integrated 3D profilometry |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | FFT-M |
| Application | Lubricity & Wear Evaluation of Diesel/Gasoline Fuels |
| Standards Compliance | ASTM D6079, ISO 12156-1, SH/T 0765-2005 |
| Frequency Range | 0.1–300 Hz |
| Stroke | 10 µm–4.0 mm |
| Load Capacity | Up to 10 N or 300 N (configurable) |
| Temperature Range | −40 °C to +500 °C |
| Humidity Control | 5–95% RH (closed-loop) |
| Ball Diameter | Standard 6 mm (1.6–12.7 mm optional) |
| Disk Dimensions | 10 mm diameter × 3 mm thickness (custom sizes available) |
| Real-time Force Feedback | Piezoelectric load sensor |
| Friction & Wear Output | Dynamic coefficient of friction, total wear scar depth, acoustic emission, in-situ film formation monitoring |
| Environmental Control | Inert gas purge capability (N₂, Ar), programmable atmosphere management |
Show next