IMKO
Filter
Showing all 7 results
| Brand | IMKO |
|---|---|
| Origin | Germany |
| Model | SONO-M1/M1C |
| Instrument Type | Moisture Analyzer for Aggregates |
| Measurement Principle | TDR (Time-Domain Reflectometry) |
| Moisture Range | 0–100% w/w |
| Accuracy | ±0.1–0.2% |
| Repeatability | ±0.3% |
| Conductivity Range | 0–5 dS/m |
| Temperature Range (Operation) | −15°C to +50°C |
| Temperature Accuracy | ±0.5°C |
| Measurement Volume | ~1.0 L (Ø100 mm × 130 mm) |
| Probe Diameter | 64 mm (M1), Coated Probe Ø6 mm × 100 mm (M1C) |
| Enclosure Rating | IP68 |
| Power Supply | 7–24 V DC |
| Current Draw | 100 mA @ 12 V DC |
| Interface | 7-pin connector, 1.5 m cable |
| Calibration | Pre-loaded aggregate-specific curves |
| Brand | IMKO |
|---|---|
| Origin | Germany |
| Model | SONO-M2 |
| Instrument Type | Moisture / Water Potential Analyzer |
| Power Supply | 7–24 V DC |
| Current Consumption | 100 mA @ 12 V DC |
| Measurement Time | 2–3 s |
| Moisture Range | 0–100% w/w |
| Accuracy | ±0.1–0.2% |
| Repeatability | ±0.3% |
| Temperature Drift (Full Scale) | ±0.3% |
| Operating Temperature | −15°C to +50°C |
| Measurement Volume | ~1.0 L (Ø130 × 100 mm) |
| Sensor Material | PVC, IP68-rated |
| Probe Length | 110 mm |
| Probe Diameter | 6 mm |
| Cable | 1.5 m, 7-pin connector |
| Calibration | Pre-loaded sand & gravel curves |
| Conductivity Range | 0–5 dS/m |
| Temperature Accuracy | ±0.5°C |
| Brand | IMKO |
|---|---|
| Origin | Germany |
| Model | SONO-WZ |
| Instrument Type | Moisture / Water Potential Analyzer |
| Measurement Principle | TDR (Time-Domain Reflectometry) |
| Power Supply | 7–24 V DC |
| Current Consumption | 100 mA @ 12 V DC (during 2–3 s measurement pulse) |
| Moisture Range | 0–100% vol/vol |
| Absolute Accuracy | ±3% vol/vol |
| Electrical Conductivity Range | 0–50 dS/m |
| Repeatability | ±2 L/m³ |
| W/C Ratio Range | 0.4 to >1 |
| Measurement Volume | ~0.5 L |
| Operating Temperature | 0 °C to 50 °C |
| Sensor Material | Stainless steel body with ceramic sensing surface |
| Ingress Protection | IP68 |
| Dimensions | 155 × 60 mm |
| Cable | 1.5 m, 7-pin connector |
| Calibration | Built-in universal calibration curve |
| Sample Consistency Range | F2 to F6 (according to DIN 1045-2) |
| Sample Mass Capacity | ≥3 kg |
| Measurement Time | 1–2 minutes per reading (averaged over 4–5 individual pulses) |
| Brand | IMKO |
|---|---|
| Origin | Germany |
| Model | TRIME-GWs |
| Instrument Type | Portable |
| Measurement Principle | Time Domain Reflectometry (TDR) |
| Moisture Range (w/w) | 3–45% |
| Accuracy | ±0.2% repeatability |
| Standard Deviation | 0.6% (3–20%), 1.0% (20–45%) |
| Sensor Temp. Range | 0–130 °C (up to 150 °C peak) |
| Transmitter Temp. Range | −10–+60 °C |
| Output | 4–20 mA analog, RS485, IMP232/MICRONET |
| Power Supply | 12–24 V DC, 3 W |
| IP Rating | IP65 (transmitter), IP67 (sensor) |
| Cable Length | 2.5 m standard |
| Conductivity Range | 0–1 mS/cm (GR/GRr), 0–2.5 mS/cm (WS2) |
| Built-in Temperature Sensor | Yes |
| Compliance | DLG-certified (German Agricultural Society) |
| Brand | IMKO |
|---|---|
| Origin | Germany |
| Model | TRIME-PICO 64/32 |
| Instrument Type | Soil Moisture and Salinity Analyzer (TDR-based) |
| Measurement Principle | Time Domain Reflectometry (TDR) with Intelligent MicroElements |
| Volumetric Water Content Range | 0–100% |
| ECtrime Range | 0–50 dS/m (dual-range configuration: 0–6, 6–12, 12–50 dS/m) |
| Temperature Range | −15 °C to +50 °C |
| Accuracy (VWC) | ±1% (0–40%), ±2% (40–70%) |
| Repeatability | ±0.2% (TRIME-PICO 64), ±0.3% (TRIME-PICO 32) |
| Probe Diameter | 63 mm (64), 32 mm (32) |
| IP Rating | IP68 (probe), IP67 (HD2), IP65 (AZS-100) |
| Power Supply | 7–24 V DC (probe), 4.8 V / 2000 mAh (HD2), Li-ion (AZS-100), Ni-MH (Bluetooth module) |
| Output | Dual 0–1 V analog (4–20 mA optional), IMP232 serial interface |
| Calibration | 15 user-defined curves stored onboard |
| Wireless | Bluetooth 2.0 (≤10 m), optional Wi-Fi (AIM-WiFi module) |
| Brand | IMKO |
|---|---|
| Origin | Germany |
| Model | TRIME-PICO IPH 2 |
| Instrument Type | Soil Moisture & Electrical Conductivity Profiler |
| Measurement Principle | Time Domain Reflectometry (TDR) with Intelligent MicroElements |
| Depth Range | Up to 3 m |
| Soil Moisture Range | 0–100% vol. |
| EC Range | 0–6 dS/m (standard), 6–12 dS/m (extended), 12–50 dS/m (high-salinity) |
| Accuracy | ±2% (0–40%), ±3% (40–70%), material-specific calibration required beyond 70% |
| Repeatability | ±0.3% |
| Operating Temperature | −15 °C to +50 °C (custom ranges available) |
| Probe Length | 200 mm |
| Sensing Volume | ~3 L (200 mm × Ø150 mm) |
| Cable | 7-conductor, 3.5 m standard |
| Power Supply | 7–24 VDC |
| Bluetooth | v2.0, 10 m range, integrated power delivery |
| Data Interface | TrimeBlue mobile app (Android/iOS), HD2 handheld reader (IP67), or SM-USB interface module |
| Brand | IMKO |
|---|---|
| Origin | Germany |
| Manufacturer | IMKO GmbH |
| Model | TRIME-PICO-IPH50 |
| Instrument Type | TDR-Based Soil Moisture & EC Profiler |
| Depth Range | Up to 50 m |
| Sensor Principle | Time-Domain Reflectometry (TDR) at 1 GHz |
| Probe Diameter | 50 mm |
| Measurement Volume | 3 L (200 mm × Ø150 mm) |
| Moisture Range | 0–100% vol. |
| EC Range | 0–6 dS/m (standard), extended up to >50 dS/m with material-specific calibration |
| Moisture Accuracy | ±2% (0–40%), ±3% (40–70%) |
| Repeatability | ±0.3% |
| Temperature Drift | ±0.3% / °C |
| Operating Temp. | −15 °C to +50 °C (customizable) |
| Cable Length | Customizable, up to 50 m |
| Calibration | Factory-calibrated for mineral soils |
| Power Supply | 7–24 VDC (probe) |
| Bluetooth module | 1000 mAh Ni-MH battery (≥1500 measurements per charge) |
| HD2 reader | 4.8 VDC, 2000 mAh (≥5000 measurements) |
| Enclosure Rating | IP67 (HD2 reader) |
| Communication | Bluetooth 2.0 (10 m range), compatible with Android/iOS smartphones and Windows CE PDAs |