ISAP
Filter
Showing all 5 results
| Brand | ISAP |
|---|---|
| Origin | Germany |
| Model | 4000e |
| Max. Flow Rate | 1000 m³/h (configurable: 200 / 500 / 700 / 1000 m³/h) |
| Operating Temperature Range | −30 °C to +40 °C (optional up to +50 °C) |
| Compliance | EU Directive 2008/50/EC, German 39th BImSchV, ISO 7708, ISO 8756, EN 481, TA Luft |
| Cut-Point Options | TSP, PM₁₀, PM₂.₅, UHVCI (Ultra-High-Volume Cascade Impactor) |
| Filter Compatibility | Glass microfiber, Quartz microfiber, Polyimide (Kapton®), Polycarbonate (PC), Polyester, Polypropylene (PP), PTFE (Teflon®), Polyurethane foam (PU), Polyvinyl fluoride (PVF/Tedlar®) |
| Optional Meteorological Sensors | Wind direction & speed, Relative humidity, Ambient temperature, Precipitation, Solar radiation, UV index, Total radiation, Acoustic noise, Vibration |
| Brand | ISAP |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ISAP Arctic-Grade Aerosol Sampler |
| Pricing | Available Upon Request |
| Brand | ISAP |
|---|---|
| Origin | Germany |
| Model | ISAP LCPI |
| Flow Accuracy | ±2% |
| Sampling Flow Rate | 5–60 LPM |
| Temperature Range | −50 to +310 °C |
| Cut-Point Range | 20.0 µm to 1 nm |
| Stages | Up to 11 stages (13 size fractions) or 6 stages (8 size fractions) |
| Impactor Type | PILAT/BERNER design |
| Material | Acid-resistant alloys |
| Sampling Mode | Isokinetic or constant-flow |
| Backup Filter Stage | Optional 0.001 µm (1 nm) stage |
| Collison Disk Diameter | 70 mm OD / 30 mm ID |
| Brand | ISAP |
|---|---|
| Origin | Germany |
| Model | ISAP LPCI |
| Sampling Flow Rates | 5 L/min or 27 L/min |
| Aerodynamic Diameter Cut-Points | 20.0 µm to 1 nm |
| Temperature Range | −50 °C to +310 °C |
| Nozzle Plate Outer Diameter | 60 mm |
| Impaction Plate Inner Diameter | 20 mm |
| Calibration | Traceable, per-stage NIST-traceable impactor calibration |
| Materials | Acid-resistant stainless steel and inert alloys |
| Compliance | Designed for ISO 29463, ISO 14644, ASTM D1738, EPA Method IO-3.3, and EU Directive 2008/50/EC ambient PM monitoring frameworks |
| Brand | ISAP |
|---|---|
| Origin | Germany |
| Model | ISAP Marine Aerosol Sampler |
| Sampling Flow Rate | 500 L/min (adjustable) |
| Particle Size Cutpoints | TSP, PM10, PM2.5 |
| Environmental Sensors | Ultrasonic Anemometer (wind speed/direction), Temperature, Relative Humidity, Rain Gauge, Solar Radiation, UV Index, Ambient Noise, Vibration Sensor |
| Corrosion Protection | Marine-grade stainless steel & conformal-coated electronics |
| Compliance | Designed for EU FerryBox Project (2002–2005) deployment standards |
| Data Logging | Time-synchronized, auto-accumulated sampling duration |
| Flow Control | Closed-loop mass flow controller with pressure/temperature compensation |