PerfecLight
Filter
Showing all 11 results
| Brand | PerfecLight |
|---|---|
| Origin | Beijing, China |
| Model | D75 |
| Illuminance | 1152.18 lx |
| Correlated Color Temperature (CCT) | 7550 K |
| Color Rendering Index (CRI) Ra | 99.2 |
| Spectral Compliance | CIE Standard Illuminant D75 |
| Application-Specific Design | Compliant with GB/T 13786–2022 “Simulated Daylight Illumination for Cotton Classing Rooms” |
| Brand | PerfecLight |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GC7980 |
| Pricing | Upon Request |
| Column Oven | 8-Step Programmable Temperature Ramp |
| Temperature Control Zones | 6 Independent Zones (Including Oven, Injector, Detector(s), etc.) |
| Control Functions | Memory Storage, Self-Diagnosis, Time-Based Event Programming |
| Detector Options | TCD (Thermal Conductivity Detector) with Automatic Carrier-Gas Failure Protection |
| TCD Max Operating Temp | 400 °C |
| TCD Absolute Temp Accuracy | ±0.5% of Setpoint |
| TCD Sensitivity (S) | ≥2500 mV·mL/mg (n-Hexadecane) |
| TCD Baseline Noise | ≤20 µV |
| TCD Drift | ≤100 µV / 15 min |
| TCD Dynamic Range | ≥10⁶ |
| FID (Flame Ionization Detector) | Auto-Ignition via Host or Workstation Control |
| FID Max Operating Temp | 400 °C |
| FID Detection Limit | ≤5×10⁻¹² g/s (n-Hexadecane) |
| FID Baseline Noise | ≤2×10⁻¹³ A |
| FID Baseline Drift | ≤5×10⁻¹³ A (30 min, after 150 min warm-up) |
| Software | Fully Remote-Controlled Chromatography Data System (CDS) |
| Injector Options | Packed-Column Injector |
| Optional Accessories | Modular Nickel Methanizer |
| Brand | PerfecLight |
|---|---|
| Origin | Beijing, China |
| Model | PL-MW2000 |
| Spectral Range | 200–1100 nm |
| Full-Scale Range | 0–20 W |
| Resolution | 1 mW |
| Detector Aperture | Φ20 mm |
| Measurement Accuracy | ±2.5% |
| Operating Voltage | 9 VDC |
| Configurable Attenuation | Removable Neutral-Density Filter Assembly (enables dual-range operation: 0–5 W direct, 0–20 W with filter) |
| Brand | PerfecLight |
|---|---|
| Origin | Beijing, China |
| Model | PLD-DGCS |
| Gas Channels | Up to 8 independent mass flow-controlled inlets |
| Output Ports | Dual configurable outlets (selectable single or simultaneous output) |
| Max Outlet Pressure | 0.4 MPa (gauge) |
| Temperature & Pressure Monitoring | Integrated sensors per outlet |
| Control Modes | Manual (fixed-ratio) and Time-Programmed (dynamic ratio/flow ramping) |
| Display | 7-inch capacitive touchscreen interface |
| Standard Conditions Reference | 0 °C, 101.325 kPa (for all stated flow values) |
| Compliance | Designed for GLP-compliant gas standard generation and traceable calibration workflows |
| Brand | PerfecLight |
|---|---|
| Origin | Beijing, China |
| Model | PLR-CTPR-O500 |
| Reactor Volume | 3 × 300 mL (modular) |
| Operating Pressure | 0–0.3 MPa |
| Temperature Range | −20 to 100 °C |
| Light Source | 800 W low-pressure mercury lamp (UVC, ~254 nm) |
| Illumination Geometry | Internal cylindrical irradiation |
| Reactor Tube Material | UV-transparent polymer (Φ6 mm standard, customizable) |
| UV Window Material | High-transmittance quartz-glass |
| Outer Housing | Reflective polymer cylinder (Φ140 × 1500 mm) |
| Overall Dimensions | 1000 × 1000 × 1900 mm |
| Weight | 50 kg |
| Configuration | Modular, vertical/horizontal adaptable |
| Brand | PerfecLight |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PLR-GPTR (Gas-Phase) |
| Pressure Rating | 0.3 MPa |
| Volumes Available | 25 mL, 50 mL, 100 mL, 200 mL |
| Built-in Catalyst-Zone Heating | Optional (denoted by “T” suffix) |
| Max. Heating Temperature | 300 °C |
| Temperature Control | 10-segment programmable, ±0.5 °C accuracy |
| Sensors | Integrated pressure transducer and catalyst bulk temperature sensor |
| Reactor Geometry | Flat-bottomed, low-diffusion-height design |
| External Modularity | Compatible with humidity control, mass flow controllers, and online gas analyzers (e.g., GC, FTIR, MS) |
| Brand | PerfecLight |
|---|---|
| Origin | Beijing, China |
| Model | PLR-SMCR1000 |
| Pressure Rating | ≥0.6 MPa |
| Optical Path Depth | 0.1–10 mm |
| Liquid Flow Range | 0.5–8.0 mL/min |
| Gas Flow Range | 0–20 mL/min |
| Residence Time | 0.625–20 min |
| LED Wavelength Range | 255–760 nm |
| LED Power | 10–120 W |
| Overall Heat Transfer Coefficient | ≥250 kW/(m³·K) |
| Temperature Control Range | −10°C to +80°C |
| Brand | PerfecLight |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PLS-LCC |
| Light Source Type | High-Power Narrow-Band LED |
| Illumination Mode | External Irradiation |
| Cooling Method | Active Liquid Cooling (Integrated Chiller) |
| Wavelength Options | 365 nm, 385 nm, 415 nm, 450 nm (±5 nm peak tolerance) |
| Spectral Bandwidth (FWHM) | ≤30 nm |
| Beam Divergence (Full Angle) | ≤9.5° |
| Output Uniformity | ≥90% over Ø29.5 mm (measured at exit aperture), ≥85% over Ø10 mm |
| Maximum Irradiance | ≥3.0 W/cm² @ 385 nm (at Ø15 mm output port, 108.3 W optical power) |
| LED Drive Current Range | Adjustable up to 7.5 A |
| Max. Electrical Power (Source) | 120 W |
| Max. Electrical Power (Controller) | 200 W |
| Chiller Setpoint Temperature | Default 15 °C (recommended ≤15 °C) |
| Operating Ambient | 0–30 °C, non-condensing, non-freezing |
| Storage Conditions | −10–60 °C, 30–85% RH (non-condensing) |
| Source Dimensions | 75 × 75 × 86 mm |
| Controller Dimensions | 120 × 103 × 200 mm |
| Chiller Model | PLS LED-LC200 |
| Brand | PerfecLight |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | SLight |
| Light Source Type | Tunable Multi-LED Array |
| Illumination Mode | External Irradiation |
| Spectral Range | 360–760 nm (AM1.5G-UV), 400–760 nm (AM1.5G-V) |
| Spectral Match Accuracy | ±10% @ 50 nm bandwidth (exceeding IEC 60904-9 Class A requirement) |
| Irradiance Output | >250 mW/cm² |
| LED Module Power Rating | ≥18 W per unit |
| Constant-Current Driver Resolution | 1 mA |
| Absolute Current Accuracy | ±2 mA |
| Brand | PerfecLight |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | WLK-1000 |
| Pricing | Available Upon Request |
| Light Source Wavelength Range | 255–760 nm (Multi-wavelength Selectable) |
| Optical Power Output | 10–120 W (Adjustable) |
| Temperature Control Range | −20 to +80 °C (Precision Thermostatic Regulation) |
| Reaction Volume per Chip Unit | 5 µL / 10 µL |
| Liquid Flow Rate | 0.1–70 mL/min |
| Compatible Phases | Liquid–liquid (homogeneous & heterogeneous) |
| Chip Substrate Materials | Fused Silica, Borosilicate Glass, PDMS, Polymer |
| Footprint | 620 mm × 540 mm × 430 mm |
| Brand | PerfecLight |
|---|---|
| Origin | Beijing, China |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Radiation Area | 40 × 40 mm² |
| Spectral Match | AM1.5G (Class A) |
| Temporal Instability | <1% (Class A) |
| Spatial Uniformity | ±2% (Class A) |
| Initial Irradiance | 1.0 sun |
| Adjustable Irradiance Range | 70–130% |
| Lamp Lifetime | 2000 h (1000 h warranty) |
| Collimation Angle | ±4° |
| Shutter Timing Range | 0.1 s – 9990 h |
| Output Orientation | Vertical Down/Up, Horizontal Left/Right, 45° Mirror-Reflected |
| Input Voltage | AC 100–220 V ±10%, 50/60 Hz |
| Operating Environment | 5–35 °C, 20–85% RH |