Chemical Analysis Instruments
Filter
Showing 961–990 of 4337 results
| Brand | AZ Technology |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SPECTRAFIRE |
| Pricing | Available Upon Request |
| Spectral Range | 2.5–40 µm (4000–250 cm⁻¹) |
| Spectral Resolution | 0.5–32 cm⁻¹ |
| Sample Diameter Requirement | ≥8.3 mm |
| Footprint (FTIR + SPECTRAFIRE) | 33 × 25 in |
| Height at Sample Port | 13.5 in |
| Electrical Requirement | 120 VAC, 60 Hz |
| Warranty | 1 year parts and labor |
| Brand | AZUP |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | AZ-UX20 |
| Operating Principle | Snapshot (Snapshot Fourier-transform–free, lenslet-based light-field hyperspectral imaging) |
| Imaging Mode | Dispersive (prism-grating hybrid dispersion with tiled detector architecture) |
| Deployment | Ground-based and UAV-mounted |
| Spectral Range | 350–1000 nm |
| Spectral Sampling Interval | 4 nm |
| Spectral Resolution | 8 nm @ 532 nm |
| Number of Spectral Bands | 164 (expandable) |
| Spatial Resolution (IFOV) | >3.5 MP × 2 CMOS/CCD sensor array |
| Field of View (TFOV) | 35° |
| Frame Rate | 5 hyperspectral data cubes per second |
| Radiometric Resolution | 12-bit digitization |
| Integration Time | 0.1–1000 ms |
| Data Interface | Dual Gigabit Ethernet |
| Geotagging | GPS/BeiDou coordinate triggering supported |
| Weight | ≤600 g |
| Operating Temperature | 0–40 °C |
| Calibration Support | Reflectance calibration with 30 cm × 30 cm diffuse white reference panel |
| Brand | B&W Tek |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | BTC665N |
| Pricing | Upon Request |
| Spectral Range | 532–1100 nm |
| Detector | Back-Illuminated CCD |
| Optical Resolution (FWHM) | 0.16–0.37 nm |
| Sensitivity | 75 photons/count @ 400 nm |
| Dynamic Range | 50,000 (typical) |
| Stray Light | <0.08% @ 600 nm |
| Brand | B&W Tek |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DIY Raman – 1064 |
| Instrument Type | Grating-Based Raman Spectrometer |
| Spectral Range | 1047 nm – 1450 nm |
| Spectral Resolution | 10 cm⁻¹ @ 1296 nm |
| Excitation Wavelength | 1064 nm |
| Raman Shift Range | 100 – 2500 cm⁻¹ (probe-dependent) |
| Detector | Linear InGaAs Array |
| Thermoelectric Cooling | −20 °C |
| Dimensions | 163 mm × 93.6 mm × 67.8 mm |
| Weight | ~1.25 kg |
| Laser Module | BRM-1064-450-100-22-DIY (450 mW standard, customizable power) |
| Probe Model | BAC100B-1064-HT |
| Laser Attenuation | OD6 (default) |
| Probe Shaft Material | 304 Stainless Steel |
| Probe Shaft Length | 76.2 mm |
| Probe Shaft Diameter | 9.4 mm |
| Working Distance | 5.9 mm |
| Max Operating Temperature | 80 °C (non-immersion) |
| Brand | B&W Tek |
|---|---|
| Origin | USA |
| Model | DIY Raman – 785 |
| Spectrometer Type | Grating-based Raman Spectrometer |
| Spectral Range | 788–1067 nm |
| Spectral Resolution | 4.5 cm⁻¹ @ 912 nm |
| Excitation Wavelength | 785 nm |
| Raman Shift Range | 150–3350 cm⁻¹ (dependent on probe selection) |
| Detector | Back-illuminated CCD (2048-pixel), TE-cooled to –25 °C (research-grade) |
| Dimensions (research-grade) | 220 × 180 × 130 mm |
| Weight (research-grade) | 3.4 kg |
| Laser Compliance | FDA 21 CFR 1040 (component-level sale only) |
| Brand | Metrohm |
|---|---|
| Origin | USA |
| Manufacturer | B&W Tek |
| Instrument Type | Portable/HANDHELD Raman Spectrometer |
| Spectral Range | 175–2500 cm⁻¹ |
| Spectral Resolution | ≤9.5 cm⁻¹ @ 1295.66 nm |
| Minimum Wavenumber | 175 cm⁻¹ |
| Spectral Repeatability | ±1 cm⁻¹ |
| Detector | TE-cooled InGaAs array |
| Dynamic Range | 25,000:1 |
| A/D Resolution | 16-bit (65,535:1) |
| Integration Time | 200 µs – >20 min |
| Laser | CleanLaze® 1064 nm diode, ≤450 mW, 0–100% linear power control in 10% steps |
| Power Supply | 12 V DC @ 6.6 A or 100–240 V AC, 50–60 Hz |
| Dimensions | 17 × 34 × 23.4 cm |
| Weight | ~3.5 kg |
| Interface | USB 2.0/1.1 |
| Trigger | 5 V TTL |
| Brand | Amptek |
|---|---|
| Origin | USA |
| Detector Type | Silicon Pin Diode (SiPIN) and Fast Silicon Drift Detector (FASTSDD) with Boron Carbide (B4C) Window |
| Element Range | Na (11) to U (92) |
| Detection Limit | 1 ppm |
| Analytical Range | 1 ppm – 99.99% |
| Repeatability | ±0.1% RSD |
| Form Factor | Handheld/Portable Compatible |
| Compliance | RoHS-compliant, Be-free alternative per ASTM E1361 and ISO 18557 |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | DiLiCo CURR TEMP |
| Instrument Type | Electrochemical Workstation |
| Channel Count | Single-Channel |
| Current Range | ±3 A/cm² |
| Current Accuracy | ±0.01 A (1% of reading) |
| Voltage Range | ≤2.5 V |
| Voltage Resolution | Not specified |
| Potentiostatic Range | 25 V |
| AC Impedance Frequency Range | 10 Hz |
| Temperature Range | ≤120 °C |
| Temperature Accuracy | ±0.5 °C |
| Temperature Scan Interval | 2.0 s |
| Sensor Array | 48 nodes (6 × 8) |
| Node Size | 7 mm × 7 mm (0.5 cm²) |
| Node Material | Gold-plated |
| Communication Interface | CAN, USB |
| External Temperature Inputs | Up to 5 (PT-100/PT-500/PT-1000) |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | QCF-125 |
| Active Area per Cell | 25 cm² |
| Max. Number of Cells | 5 |
| Temperature Range | up to 140 °C |
| Contact Pressure | up to 6.28 kN (2.5 N/mm², equivalent to 8 bar) |
| Gas Inlet/Outlet Port Diameter | Ø 8 mm |
| Pneumatic Control Port Diameter | Ø 4 mm |
| Electrical Interface | 1 mm sensor wire socket, 8 mm load current terminal |
| Stack Thickness Adjustment Range | up to 0.9 mm per MEA |
| Dimensions (L×W×H) | 465 × 175 × 242 mm |
| Net Weight | 13.5 kg |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | QCF25 |
| Instrument Type | Electrochemical Workstation Accessory |
| Current Range | ±5 A |
| Current Accuracy | ±0.1% of full scale |
| Potential Accuracy | ±15–32 µV |
| Potentiostatic Range | ±25 V |
| EIS Frequency Range | 10 Hz – 1 MHz (system-dependent, requires compatible potentiostat) |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | QCF50 |
| Active Area | 50 cm² |
| Pressure Control | Pneumatically Actuated, Continuously Adjustable |
| Temperature Compatibility | –50 °C to +250 °C (with optional TCU) |
| Compliance | Designed for ISO/IEC 17025-compliant lab environments |
| Customization | Available for PEMFC, AEMFC, electrolysis, and metal–air cells |
| Accessories | CMD compression monitor, CSL current distribution scanner, DHRE_Pt reference electrode, HSE humidity sensors, flow-field customization, liquid-cooled/heated manifolds |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | SuSy300 |
| Output Power | 300 W (nominal) |
| DC Voltage Range | 16–21 V |
| Rated Current | 18 A |
| System Efficiency | 45% @ 300 W |
| Fuel | 99.9% H₂ + ambient air |
| H₂ Inlet Pressure | 2–20 bar |
| Startup Time | <3 s |
| Safety Monitoring | Integrated H₂ pressure & temperature sensors |
| Gas Port | 1/8" internal thread |
| Control Interface | SUB-D9 connector, RS-232 protocol |
| Dimensions | 244 × 155 × 180 mm |
| Weight | 3.9 kg |
| Brand | BANFF |
|---|---|
| Model | Da Vinci I |
| Type | Portable Gas Chromatograph with FID |
| Origin | Zhejiang, China |
| Manufacturer | BANFF Biotechnology |
| Application Domain | Environmental Monitoring |
| Compliance Standards | HJ 38-2017, HJ 1012-2018, HJ 604-2017, GB/T 31705-2015, JJG 700-2016, JJF (Su) 225-2019 |
| Certification Framework | RB/T 214, HJ 630 |
| Connectivity | Wi-Fi & 4G remote control |
| Detection Principle | Gas Chromatography–Flame Ionization Detection (GC-FID) |
| Operational Modes | Lab-based stationary analysis & field-deployable on-site analysis (including explosion-proof environments) |
| Data Output | Auto-generated audit-trail-compliant reports |
| Brand | BANFF |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | Da Vinci MINI |
| Instrument Type | Portable Gas Chromatograph |
| Application Field | Environmental Monitoring |
| Detection Principle | Gas Chromatography with Flame Ionization Detection (GC-FID) |
| Target Analytes | Total Hydrocarbons (THC), Methane (CH₄), Non-Methane Hydrocarbons (NMHC), BTEX, Halogenated VOCs |
| Compliance Standards | HJ 1012–2018, HJ 38–2017, DB11/1367–2016, DB12/524–2020, DB51/2377–2017, JJG 700–2016, JJF (Su) 225–2019 |
| Brand | Banff |
|---|---|
| Model | P100 |
| Type | Portable Gas Chromatograph |
| Detection Principle | Microfluidic GC with PID Detection |
| Detection Limit | Sub-ppb (VOCs) |
| Sample Introduction | Ambient Air / Headspace / Canister via Integrated Microtrap |
| Compliance | Aligned with GB/T 18883–2022 (Indoor Air Quality Standard) |
| Software | Embedded Real-Time Analysis Engine with Auto-Report Generation |
| Calibration | Onboard Method Calibration & Multi-Point Standard Gas Support |
| Maintenance | Automated Post-Run Trap & Flow Path Purge |
| Power | Rechargeable Li-ion Battery (≥4 h continuous operation) |
| Dimensions | 295 × 220 × 145 mm |
| Weight | 3.2 kg |
| Operating Temperature | 5–40 °C |
| Humidity Range | 10–90% RH (non-condensing) |
| Brand | Banff |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | QitVenture 1 |
| Instrument Type | Portable |
| Weight | 18 kg |
| Brand | Banff |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Regional Classification | Domestic (China) |
| Model | QitVenture 6 E |
| Instrument Type | Portable GC-MS |
| Ionization Sources | ESI, TD-ESI, APCI |
| Mass Analyzer | Quadrupole |
| Mass Range | 10–1000 m/z |
| Battery Runtime | >4 hours (typical operational mode) |
| Dimensions | <38 × 28 × 18 cm |
| Weight | <12 kg |
| Sample Introduction | Gas, Liquid, Solid (via integrated thermal desorption and direct probe options) |
| Brand | Baode Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Type | Online Mercury Analyzer |
| Model | ARA-7 |
| Measurement Principle | Cold Vapor Atomic Absorption Spectrometry (CVAAS) |
| Detection Wavelength | 253.7 nm |
| Sample Matrix | Aqueous environmental and industrial wastewater |
| Compliance | HJ 597–2011 (China), ASTM D3559, ISO 12846 |
| Key Components | Integrated DRA-7 wet digestion module + DRD-7 CVAAS detector |
| Automation Level | Fully automated digestion, reduction, amalgamation, desorption, detection, and cleaning |
| Brand | Baode Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SGM-9 |
| Instrument Type | Portable |
| Measurement Principle | Cold Vapor Atomic Absorption Spectrometry (CVAAS) |
| Compliance Standard | JIS B 7994 |
| Brand | Baoying |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Oxygen-Nitrogen Analyzer |
| Model | ON-316 |
| Detection Principle | Inert Gas Fusion Coupled with Non-Dispersive Infrared (NDIR) and Thermal Conductivity Detection (TCD) |
| Oxygen Range | 0.1 ppm – 5000 ppm (low), 0.5% – 20% (high) |
| Nitrogen Range | 0.1 ppm – 5000 ppm (low), 0.5% – 50% (high) |
| Detection Limit | 0.01 ppm |
| Accuracy | ±1 ppm or RSD ≤ 1% (O₂/N₂) |
| Analysis Time | O₂: 120–180 s |
| N₂ | 120–240 s |
| Pulse Furnace Power | 8.0 kW |
| Detector Configuration | Dual-channel NDIR for oxygen, TCD for nitrogen |
| Sample Form | Solid metals and non-metals (powders, chips, rods, pellets) |
| Compliance Support | ASTM E1019, ISO 14284, GB/T 11261, JIS G 1211 |
| Brand | Baoying Technology |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | ONH-316 |
| Instrument Type | Oxygen/Nitrogen/Hydrogen Elemental Analyzer |
| Oxygen Range | Low-O: 0.1–5000 ppm |
| High-O | 0.5–20 wt% |
| Nitrogen Range | Low-N: 0.1–5000 ppm |
| High-N | 0.5–50 wt% |
| Hydrogen Range | 0.1–5000 ppm |
| Accuracy | O/N: ±1 ppm or RSD ≤ 1% |
| H | ±0.2 ppm or RSD ≤ 2% (relative to certified reference material uncertainty) |
| Sensitivity | 0.01 ppm |
| Analysis Time (O) | 120–180 s |
| Pulse Furnace Power | 8.0 kW |
| Brand | Baoying |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Oxygen-Nitrogen-Hydrogen Analyzer |
| Model | ONH-316 |
| Detection Principle | Inert Gas Fusion Coupled with Non-Dispersive Infrared (NDIR) and Thermal Conductivity Detection (TCD) |
| Oxygen Range | High-O: 0.5–20 wt% |
| Low-O | 0.1–5000 ppm |
| Nitrogen Range | High-N: 0.5–50 wt% |
| Low-N | 0.1–5000 ppm |
| Hydrogen Range | 0.1–5000 ppm |
| Precision | O/N: ±1 ppm or RSD ≤ 1% |
| H | ±0.2 ppm or RSD ≤ 2% |
| Sensitivity | 0.01 ppm |
| Analysis Time | O: 120–180 s |
| N | 120–240 s |
| H | 120–180 s |
| Pulse Furnace Power | 8.0 kW |
| Detector Configuration | Dual-channel NDIR for O/C (CO), Single-channel TCD for H₂ and N₂ |
| Gas Handling | EPC-controlled pneumatic architecture with independent electronic pressure control (EPC) per gas path |
| Calibration Options | Single-point, multi-point, and slope/intercept correction |
| Software Compliance | Audit trail, user-level access control, data export in CSV/Excel, optional 21 CFR Part 11 compliance module |
| Structural Design | Integrated monolithic chassis housing furnace, gas analysis module, electronics, and industrial-grade embedded PC |
| Brand | Baoying Technology |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Line | TC-306 Series |
| Instrument Type | Oxygen-Nitrogen-Hydrogen Elemental Analyzer |
| Analytical Range | O: 0.1 ppm – 10 wt% |
| Low N | 0.1 ppm – 5000 ppm |
| High N | 0.5 – 30 wt% |
| H | 0.1 ppm – 5000 ppm |
| Analytical Precision | O & N: ±1 ppm or RSD ≤ 1.0% |
| H | ±0.2 ppm or RSD ≤ 2.0% |
| Sensitivity | 0.01 ppm |
| Analysis Time | O: 120–180 s |
| N | 120–240 s |
| H | 120–180 s |
| Pulse Furnace Power | 8.0 kW |
| Brand | Batop |
|---|---|
| Origin | Germany |
| Model | TDS10XX |
| Spectral Range | 0.05–4 THz (laser-dependent) |
| Spectral Resolution | 2 GHz (equivalent to ~0.025 cm⁻¹) |
| Imaging Resolution | 1280 × 1024 pixels |
| Field of View (TFOV) | 8° |
| Instantaneous Field of View (IFOV) | 0.18 mrad |
| Frame Rate | 15 fps |
| Beam Diameter | 22 mm (collimated), 1 mm @ 1 THz (focused) |
| Sample Size Support | up to 30 × 30 mm (collimated), ≥5 × 5 mm (focused) |
| Dynamic Range | >65–75 dB |
| Scan Range | 500–650 ps |
| THz Pulse Repetition Rate | 1–30 kHz (10 kHz default) |
| Bias Voltage for PCA Emitter | 10 V |
| Operating Mode | Free-space or fiber-coupled (1550 nm / 1060 nm options) |
| Environmental Compatibility | N₂-purged sample chamber |
| Brand | BaySpec |
|---|---|
| Origin | USA |
| Manufacturer | BaySpec, Inc. |
| Type | Portable / Handheld Raman Spectrometer |
| Model | Nano-LB |
| Spectral Range | 300–2000 cm⁻¹ or 300–2500 cm⁻¹ (configurable) |
| Spectral Resolution | 12–15 cm⁻¹ (Rayleigh criterion) |
| Dimensions | 63 mm × 39 mm × 17 mm (compact variant) / 70 mm × 56 mm × 27 mm (belt-wearable variant) |
| Weight | 63 g / 118 g |
| Laser Source | Integrated diode laser, output power <150 mW (software-adjustable) |
| Power Supply | Rechargeable Li-ion battery, ≥8 h continuous operation |
| Connectivity | Bluetooth 5.0 + USB 3.0 |
| Control Interface | LightSpec mobile app (Android) and PC software |
| Detection Mode | Point-and-shoot with ergonomic button or software-triggered acquisition |
| Brand | BaySpec |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | OCI-M |
| Operating Principle | Pushbroom Scanning |
| Imaging Modality | 3D Hyperspectral Data Cube Acquisition |
| Deployment Platform | Ground-based and Airborne Compatible |
| Spectral Range | 400–1000 nm |
| Spectral Resolution | 5 nm (FWHM) |
| Spatial Resolution | 1000 pixels across track × L pixels along track |
| Total Field of View (TFOV) | 18° |
| Frame Rate | 120 fps |
| Interface | USB 3.0 |
| Dimensions | 30 mm × 30 mm × 75 mm |
| Weight | 117 g |
| Real-time Preview | Yes |
| Scan Time per Cube | ≤5 s |
| Data Cube Generation Time | ≤10 s |
| Brand | BaySpec |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | Portability/Continuity/Agility |
| Instrument Type | Portable |
| Mass Range | 30–1600 Da |
| Dynamic Range | 3.5 orders of magnitude |
| Mass Resolution (FWHM) | 0.49 Da |
| Maximum Scan Rate | 15,000 Da/s |
| Mass Accuracy | ±0.3 Da |
| Weight | 10–20 kg |
| Brand | BCT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic Instrument |
| Model | 960A |
| Instrument Type | Multifunctional Autosampler |
| Sample Introduction Ports | 16-position |
| Compatible Sample Containers | Vacuum Sampling Canisters & Tedlar® Bags |
| Entire Gas Path Heating | Yes (Uniform Temperature Control) |
| Gas Path Surface Treatment | Fused Silica Inert Coating (Verified via Inertness Testing) |
| Multi-Position Injection Valve | Bidirectional Rotational Actuation |
| Flow Path Optimization | Minimized Contact Time Between Sample and Valve Core |
| Brand | BCT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | 960SN |
| Instrument Type | Multifunctional High-Pressure Autosampler |
| Pricing | Upon Request |
| Brand | BCT |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Yes |
| Type | Domestic |
| Model | BCT-700 |
| Temperature Control Range | 0–45 °C (ambient operating environment) |
| Gas Flow Rate | 0.1 MPa, 100 mL/min ±5 mL/min |
| Tube Capacity | 21 positions (3 independent zones × 7 tubes each) |
| Aging Zone Temperature Range | Ambient to 400 °C ±1 °C |
| Vaporization Zone Temperature Range | 0–200 °C ±1 °C |
| Aging Time Setting | 0–999 min |
| Sample Introduction Flow (Calibration Standard Prep) | 0–100 mL/min ±1 mL/min |
| Input Pressure Limit | ≤0.4 MPa |
| Power Supply | AC 220 V, 50–60 Hz, 400 W |
| Dimensions | 380 × 270 × 230 mm |
| Weight | ≤10 kg |