Chemical Analysis Instruments
Filter
Showing 1051–1080 of 10645 results
| [Brand | Safe |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AT-X100 |
| Portability | Handheld / Field-Deployable |
| Elemental Range | Mg to U |
| Quantification Range | 1 ppm – 99.99% (w/w) |
| Repeatability | ≤ 0.1% RSD |
| Detector Options | Si-Pin or SDD (Selectable) |
| Compliance | Designed for field-deployable environmental screening per EPA Method 6200, ASTM D7298, and China’s HJ 1003–2018] |
| Brand | Atago |
|---|---|
| Origin | Japan |
| Model | ACID 5 + HIKARi 5 |
| Instrument Type | Portable |
| Parameter Types | Dual (Brix & Titratable Acidity) |
| Brix Range (HIKARi 5) | 10.0–18.0% |
| Brix Range (ACID 5) | 0.0–60.0% |
| Acidity Range | 0.10–4.00% |
| Brix Accuracy (HIKARi 5) | ±1.0% |
| Brix Accuracy (ACID 5) | ±0.2% |
| Acidity Accuracy | ±0.10% (0.10–1.00%), ±0.20% (1.01–4.00%) |
| Brix Resolution | 0.1% |
| Acidity Resolution | 0.01% (0.00–9.99%), 0.1% (≥10.0%) |
| pH Accuracy | ±0.1 pH |
| Calibration Solution Type | USA-standard buffer solutions |
| Compliance | Designed for ISO/IEC 17025-aligned routine quality control workflows |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | CM-ISα (Cat. No. 3700) |
| Measurement Principle | Critical Angle Refractometry |
| Measured Parameters | Refractive Index (nD), Brix (%), Concentration (% w/w or % w/v), Temperature |
| Refractive Index Range | 1.32000–1.49100 |
| Brix Range | 0.0–80.0% |
| Temperature Range | −15 to +160°C (5 to 320°F) |
| Refractive Index Resolution | 0.00001 |
| Brix Resolution | 0.01% or 0.1% (configurable) |
| Temperature Resolution | 0.1°C / 0.1°F |
| Refractive Index Accuracy | ±0.0002 |
| Brix Accuracy | ±0.1% |
| Temperature Accuracy | ±1°C / ±1°F |
| Automatic Temperature Compensation Range | 5–100°C |
| Output Signals | DC 4–20 mA (2-wire) or RS-232C |
| Power Supply | DC 24 V |
| Intrinsic Safety Certification | Ex ia IIB T3 Ga TA (IEC 60079-0, -11) |
| Enclosure Rating | IP67 |
| Process Connection | G1/2" or 3/4" NPT (optional flange mount) |
| Wetted Materials | Sapphire prism, 316L stainless steel body, EPDM or Viton® gasket options |
| Operating Pressure | ≤1.0 MPa (10 bar) |
| Response Time (T90) | < 5 s (typical, dependent on flow rate and thermal stability) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DEC-2 Portable Digital Conductivity Meter |
| Measurement Range | 0.0–19.9 mS/cm |
| Resolution | 0.1 mS/cm |
| Accuracy | ±0.2 mS/cm (0.0–10.0 mS/cm), ±0.4 mS/cm (10.1–19.9 mS/cm) |
| Temperature Range | 0.0–50.0 °C with Automatic Temperature Compensation (ATC) |
| IP Rating | IP67 |
| Power | 4 × LR44 button cells |
| Dimensions | 4.5 × 3.0 × 16.3 cm |
| Weight | 90 g (without accessories) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DEC-2 (Cat. No. 4340) |
| Instrument Type | Pocket-Sized Conductivity Pen |
| Parameter Type | Single-Parameter (Conductivity) |
| Measurement Range | 0.0 to 19.9 mS/cm |
| Resolution | 0.1 mS/cm |
| Accuracy | ±0.2 mS/cm (0.0–10.0 mS/cm), ±0.4 mS/cm (10.1–19.9 mS/cm) |
| Temperature Range | 0.0–50.0 °C with Automatic Temperature Compensation (ATC) |
| IP Rating | IP67 |
| Calibration Standard | 0.71 g/100 g NaCl solution |
| Power Source | 4 × LR44 button cells |
| Dimensions | 4.5 × 3.0 × 16.3 cm |
| Weight | 90 g (without accessories) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DPH-2 |
| Instrument Type | Portable pH Meter |
| Parameter Type | Single-parameter (pH) |
| Measurement Range | 0.0 to 14.0 pH |
| Resolution | 0.1 pH |
| Accuracy | ±0.1 pH (at 2.0–12.0 pH, 25°C) |
| Calibration Points | 3-point (pH 4.0, 7.0, 10.0) |
| Temperature Compensation | Automatic (ATC), 0–50°C |
| Power Supply | Four LR44 button cells (1.5 V each) |
| Enclosure Rating | IP67 |
| Dimensions | 4.5 × 3.0 × 16.3 cm |
| Weight | 90 g (instrument only) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DPH-2 Digital Portable pH Meter |
| Instrument Type | Pen-style pH Meter |
| Parameter Type | Single-parameter (pH) |
| Measurement Range | 0.0 to 14.0 pH |
| Resolution | ±0.1 pH (2.0–12.0 pH) |
| Accuracy | ±0.1 pH (2.0–12.0 pH) |
| Temperature Range | 0.0–50.0 °C with Automatic Temperature Compensation (ATC) |
| Calibration Points | 4.0, 7.0, and 10.0 pH buffer solutions |
| Ingress Protection Rating | IP67 |
| Power Supply | Four LR44 button cells |
| Dimensions | 4.5 × 3.0 × 16.3 cm |
| Weight | 90 g (without accessories) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DPH-2 |
| Instrument Type | Portable |
| Parameter Type | Single-parameter (pH) |
| Measurement Range | 0.0 to 14.0 pH |
| Resolution | 0.1 pH |
| Accuracy | ±0.1 pH (within 2.0–12.0 pH range) |
| Temperature Range | 0.0 to 50.0 °C with Automatic Temperature Compensation (ATC) |
| Protection Rating | IP67 |
| Power Supply | Four LR44 button cells |
| Dimensions | 45 × 30 × 163 mm |
| Weight | 90 g (body only) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-BX/ACID 7 |
| Instrument Type | Portable |
| Measurement Parameters | Dual (Brix and Total Acidity as Citric Acid) |
| Brix Range | 0.0–90.0% |
| Acidity Range | 0.10–4.00% (as citric acid) |
| Brix Resolution | 0.1% |
| Acidity Resolution | 0.01% |
| Brix Accuracy | ±0.2% |
| Acidity Accuracy | ±0.10% (0.10–1.00%), ±10% relative (1.01–4.00%) |
| Temperature Compensation | 10–40°C |
| IP Rating | IP65 |
| Dimensions | 5.5 × 3.1 × 10.9 cm |
| Weight | 100 g (host only) |
| Power | 2 × AAA alkaline batteries |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model Series | PAL-BX/ACID, PAL-Easy/ACID |
| Instrument Type | Portable |
| Parameter Type | Single-Parameter (Brix or Acidity) |
| Measurement Range | Brix 0.0–60.0% |
| Resolution | 0.1% Brix |
| Accuracy | ±10% |
| Compliance | CE, JIS K 0067, ISO 2173 |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-BX |
| Portability | Handheld |
| Application Environment | Laboratory & Field |
| Brix Range | 0.0–90.0% |
| Salt (NaCl) Range | 0.00–15.00% |
| Brix Accuracy | ±0.2% |
| Salt Accuracy | 0.00–0.99%: ±0.05% |
| 1.00–9.99% | ±5% (relative) |
| 10.00–15.00% | ±10% (relative) |
| Brix Resolution | 0.1% |
| Salt Resolution | 0.01% |
| Temperature Compensation Range | Brix: 10–100°C |
| Salt | 10–40°C |
| Measurement Principle | Optical Refraction (Brix), Conductivity (Salt) |
| Compliance | ISO 2173, AOAC 932.12, ASTM D1074 |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-Easy ACID1 |
| Instrument Type | Portable |
| Parameter Type | Single-Parameter (Total Acidity as Citric Acid) |
| Measurement Range | 0.10–4.00% (Low-Acid Citrus), 2.50–8.80% (High-Acid Citrus) |
| Resolution | 0.01% (0.00–9.99%), 0.1% (≥10.0%) |
| Accuracy | ±0.10% (0.10–1.00%), ±10% relative (1.01–8.80%) |
| Temperature Compensation | 10–40°C (Automatic) |
| Protection Rating | IP65 |
| Dimensions | 5.5 × 3.1 × 10.9 cm |
| Weight | 100 g (instrument only) |
| Power | 2 × AAA alkaline batteries |
| Calibration Solution | RE-130004 |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-Easy ACID2 |
| Instrument Type | Portable |
| Parameter Count | Dual (Acidity % + Temperature) |
| Measurement Range | 0.10–4.00% (as tartaric acid) |
| Accuracy | ±0.10% (0.10–1.00%), ±10% relative (1.01–3.50%) |
| Resolution | 0.01% (0.01–9.99%), 0.1% (≥10.0%) |
| Response Time | 3 seconds |
| Temperature Compensation Range | 10–40 °C |
| IP Rating | IP65 |
| Dimensions | 55.3 × 31.2 × 108.5 mm |
| Weight | 100 g |
| Offset Correction | Linear y = ax ± b calibration function |
| Backlight Duration | 30 s after any key press |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-Easy ACID4 Strawberry Acidimeter |
| Instrument Type | Portable |
| Parameter Type | Single-parameter (Acid Content) |
| Measurement Principle | Conductivity-based acid quantification (citric acid equivalent) |
| Measurement Range | 0.10–3.50% (as citric acid) |
| Accuracy | ±0.10% (0.10–1.00%) |
| Resolution | 0.01% (0.00–9.99%), 0.1% (10.0–99.9%) |
| Temperature Compensation Range | 10–40 °C |
| Measurement Time | ≤3 seconds |
| OFFSET Correction Function | Linear calibration offset (y = ax ± b) for method alignment |
| IP Rating | IP65 |
| Dimensions | 55.3(W) × 31.2(D) × 108.5(H) mm |
| Weight | 100 g |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-EC |
| Portability | Portable |
| Application Environment | Laboratory & Field |
| Conductivity Range | 0.00–19.9 mS/cm |
| TDS Range | 0–9950 ppm |
| Temperature Range | 10–40 °C |
| Accuracy | ±0.04 mS/cm (EC), ±20 ppm (TDS) |
| Resolution | 0.01 mS/cm, 5 ppm |
| Sample Volume | 0.6 mL |
| Calibration Standard | 12.9 mS/cm solution |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-Fruit & Jam (pH) |
| Instrument Type | Portable |
| Parameter Type | Single-parameter (pH) |
| Measurement Range | pH 0.00–14.00 |
| Resolution | 0.01 pH |
| Accuracy | ±0.01 pH |
| Calibration Solutions | pH 4.01, pH 6.86, pH 9.18 (or pH 4.01, pH 7.00, pH 10.01) |
| Automatic Temperature Compensation (ATC) | 10–40 °C |
| Sample Volume | 0.6 mL |
| Power Supply | Two AAA alkaline batteries |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-HIKARI |
| Instrument Type | Portable |
| Parameter Type | Single-Parameter (Brix) |
| Measurement Range | 0–100% Brix |
| Resolution | 0.1% Brix |
| Accuracy | ±5% Brix |
| Data Storage | Up to 100 measurements with NFC-enabled transfer |
| Compliance | Designed for agricultural QC, post-harvest assessment, and horticultural R&D workflows |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-HIKARi Ripeness |
| Instrument Type | Portable |
| Parameter Type | Single-parameter (Ripeness Index, 0–100%) |
| Measurement Range | 0–100% (Ripeness Scale) |
| Resolution | 0.1% Brix-equivalent |
| Accuracy | ±5% (relative to reference maturity index) |
| Compliance | Designed for field-deployable non-destructive assessment in horticultural QC and post-harvest logistics |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-pH |
| Instrument Type | Portable pH Meter |
| Parameter Type | Single-Parameter (pH) |
| Measurement Range | 0.00–14.00 |
| Resolution | 0.01 pH |
| Accuracy | ±0.10 pH |
| Precision | 0.01 pH |
| Electrode Type | Integrated Smooth-Surface Glass Electrode with Built-in Reference |
| Housing Material | PBT Resin |
| IP Rating | IP65 (Water Resistant – Prism Rinseable) |
| Sample Volume Required | 0.6 mL |
| Stabilization Time | 40–60 s |
| Calibration Buffers Supplied | pH 4.01, 6.86, and 9.18 (3 vials) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-pH |
| Instrument Type | Portable |
| Parameter Type | Single-parameter (pH) |
| Measurement Range | 0.00–14.00 pH |
| Resolution | 0.01 pH |
| Accuracy | ±0.10 pH |
| Precision | ±0.1 pH |
| Sample Volume | 0.6 mL |
| Electrode Type | Flat-surface glass electrode with integrated reference |
| Temperature Compensation Range | 10.0–40.0 °C |
| Power Supply | 2 × AAA alkaline batteries |
| Dimensions | 5.5 × 3.1 × 10.9 cm |
| Weight | 100 g (main unit only) |
| Catalog No. | 4311 |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-pH Plus |
| Instrument Type | Portable pH Meter |
| Parameter Type | Single-parameter (pH) |
| Measurement Range | pH 0.00–14.00 |
| Resolution | 0.01 pH |
| Accuracy | ±0.10 pH |
| Temperature Range | 10.0–40.0 °C |
| Temperature Accuracy | ±1.0 °C |
| Sample Volume Requirement | ≥0.6 mL |
| Electrode Type | Flat-surface glass pH electrode |
| Calibration Solutions | ATAGO-certified pH 4.01, 6.86, and 9.18 standard buffers |
| IP Rating | IP65 |
| Power Supply | Two AAA batteries |
| Dimensions | 5.5 × 3.1 × 10.9 cm |
| Weight | 100 g (instrument only) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-pH Plus |
| Instrument Type | Portable |
| Parameter Type | Single (pH) |
| Measurement Range | 0.00–14.00 pH |
| Resolution | 0.01 pH |
| Accuracy | ±0.10 pH |
| Precision | ±0.1 pH |
| Minimum Sample Volume | 0.6 mL |
| Electrode Design | Smooth-surface, impact-resistant glass electrode |
| Calibration | Automatic 1–3 point calibration (standard buffers: pH 4.01, 7.00, 10.01) |
| Compliance | Designed for GLP-compliant workflows |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PR-40DMF |
| Measurement Range | 0.0–40.0% (w/w) DMF |
| Resolution | 0.1% |
| Accuracy | ±0.3% |
| Temperature Compensation | 5–40°C (automatic) |
| IP Rating | IP64 |
| Power Supply | 9V battery (006P) |
| Dimensions | 17 × 9 × 4 cm |
| Weight | 300 g (without accessories) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | VISCO™ B(L) |
| Instrument Type | Portable |
| Parameter Type | Single-Parameter (Viscosity & Temperature) |
| Viscosity Range | 12–60,000,000 mPa·s (cP) across four rotor/speed combinations (L1–L4) |
| Temperature Range | 0.0–100.0 °C |
| Viscosity Accuracy | ±1% of full-scale reading |
| Temperature Accuracy | ±0.2 °C |
| Torque Measurement | 10.0–100.0 % |
| Power Supply | 4× LR6/AA alkaline batteries or AC adapter |
| Data Output | USB to PC |
| Dimensions (Main Unit) | 178 × 86 × 194 mm |
| Weight (Main Unit) | 1.2 kg |
| Compliance | Designed for GLP-compliant routine QC in chemical, pharmaceutical, and food laboratories |
| Brand | Atik |
|---|---|
| Sensor Resolution | 1620 × 1220 pixels |
| Sensor Type | Monochrome back-illuminated CCD |
| Pixel Size | 9.0 µm × 9.0 µm |
| Full Well Capacity | ~100,000 e⁻ |
| Read Noise | <10 e⁻ (at 0.1 MHz) |
| Dark Current | <0.001 e⁻/pixel/sec @ −20 °C |
| Cooling | Thermoelectric (TE) to −20 °C below ambient |
| Interface | USB 2.0 |
| Shutter | Electronic rolling shutter |
| Compliance | CE, RoHS, FCC Class B |
| Software Support | ASCOM, DirectShow, LabVIEW, MATLAB, Python (via SDK) |
| Brand | Atik Instruments |
|---|---|
| Sensor Resolution | 1460 × 1932 pixels |
| Sensor Type | Monochrome Back-Illuminated CCD |
| Pixel Size | 6.45 µm × 6.45 µm |
| Full Well Capacity | ~100,000 e⁻ |
| Read Noise | < 10 e⁻ (at slow readout) |
| Dark Current | < 0.001 e⁻/pixel/sec @ −20 °C |
| Cooling | Thermoelectric (TEC), regulated to ΔT ≤ −45 °C below ambient |
| Interface | USB 2.0 with proprietary low-noise controller |
| Shutter | Electronic Rolling Shutter (global reset capable) |
| Compliance | CE, RoHS, FCC Class B |
| Brand | Atonarp |
|---|---|
| Origin | Japan |
| Model | AST3007 |
| Mass Range | 2–285 amu |
| Resolution | 0.8 ± 0.2 (FWHM) |
| Detection Limit | 0.1 ppm |
| Sampling Speed | High-speed dynamic acquisition |
| Sensitivity | Sub-ppb for key process gases |
| Vacuum System | Turbomolecular pump |
| Detector | Faraday Cup / Secondary Electron Multiplier (FC/SEM) |
| Operating Temperature | 15–35 °C |
| Power Consumption | 350 W |
| Dimensions (L×W×H) | 299 × 218 × 331 mm |
| Weight | 15 kg |
| Brand | Atonarp |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Aston™ Process Mass Spectrometer |
| Pricing | Available Upon Request |
| Brand | Atonarp |
|---|---|
| Origin | Japan |
| Model | Aston™ |
| Application Domain | In-line Process Mass Spectrometry for Semiconductor Vacuum System Integrity Monitoring |
| Compliance Context | Designed for ISO 9001-certified semiconductor fabs |
| Environmental Rating | IP65-rated enclosure |
| Brand | ATS |
|---|---|
| Origin | Switzerland |
| Model | ATS 200S |
| Detection Elements | Na, K, Li, Ca (standard) |
| Measurement Range | Na/K/Li/Ca: 0–200 ppm |
| Ba | 50–1000 ppm |
| Units | ppm, mmol/L, mEq/L |
| Sensitivity | 0.4 ppm (Na, K) |
| Detection Limit | 0.2 ppm (Na, K) |
| Linearity | Natural logarithmic linearity (R² > 0.999 over full range) |
| Repeatability | ≤1% CV (n=10) |
| Drift | ≤1% over 30 min |
| Calibration | One-touch auto-zero and multi-point calibration |
| Operating Temperature | 15–36 °C |
| Relative Humidity | ≤85% RH (non-condensing) |
| Dimensions (Analyzer) | 320 × 400 × 400 mm (L×W×H) |
| Net Weight (Analyzer) | 9 kg |
| Air Compressor Dimensions | 340 × 250 × 350 mm |
| Net Weight (Compressor) | 6 kg |
| Compliance | CE, RoHS, ISO/IEC 17025-compatible operation |
| Software Interface | USB 2.0, RS-232, optional Ethernet module |