Common Laboratory Equipment
Filter
Showing 3361–3390 of 4952 results
| Brand | LAUDA |
|---|---|
| Origin | Germany |
| Model | RA8 |
| Temperature Range | -25 °C to +85 °C |
| Temperature Stability | ±0.05 °C |
| Heating Power | 1.5 kW |
| Cooling Capacity (at 20 °C) | 0.225 kW |
| Pump Pressure | 0.2 bar |
| Pump Flow Rate | 15 L/min (adjustable between 5–15 L/min) |
| Bath Volume | 5–7.5 L |
| Opening Dimensions × Depth | 165 × 190 × 160 mm |
| Construction | Stainless Steel Bath Chamber |
| Control Interface | 3-button LED Display |
| Circulation Type | Internal & External |
| Temperature Control Mode | Dual-mode (Heating & Refrigeration) |
| Brand | LAUDA |
|---|---|
| Origin | Germany |
| Model | Semistat S1200 / S2400 / S4400 |
| Temperature Range | −20 to +90 °C |
| Control Stability | ±0.1 K |
| Cooling Principle | Solid-State Peltier (Thermoelectric) |
| Fluid Volume | Minimal (Typ. < 1.5 L) |
| Footprint | Floor-Mountable or Sub-Fab Integrated |
| Energy Consumption | Up to 90% Lower vs. Compressor-Based Systems |
| Compliance | Designed for ISO Class 1–5 Cleanroom Integration |
| Application Focus | Electrostatic Chuck (ESC) Thermal Management in Plasma Etch Tools |
| Brand | LAUDA |
|---|---|
| Origin | Germany |
| Model | UC 80 |
| Cooling Type | Water-Cooled |
| Temperature Control Range | –10 to 35 °C |
| Temperature Stability | ±0.5 °C |
| Refrigeration Capacity | 80.0 kW (at 10 °C outlet water temperature) |
| Circulating Pump Pressure | 3.0 bar |
| Circulating Pump Flow Rate | 250 L/min |
| Reservoir Volume | 125 L |
| Operation Mode | Continuous |
| Configuration | Split-System |
| Compliance | EU Ecodesign Directive (EU) 2016/2281, EN 60335-1, EN 60335-2-40 |
| Brand | LAUDA |
|---|---|
| Origin | Germany |
| Model | Ultracool |
| Type | Refrigerated/Heating Recirculating Chiller |
| Circulation Mode | Internal & External |
| Temperature Range | 0–100 °C |
| Temperature Stability | ±0.1 °C (typical, dependent on load and ambient conditions) |
| Refrigerant | Low-GWP hydrofluoroolefin (HFO-1234ze, GWP < 250) |
| Enclosure Rating | IP54 |
| Max Ambient Operating Temperature | 50 °C |
| Construction | Electroplated copper housing with epoxy resin coating |
| Reservoir Material | Insulated polyethylene tank with integrated level switch |
| Heat Exchanger | External plate-type evaporator |
| Pump | High-efficiency stainless steel centrifugal pump with internal bypass |
| Safety Features | Freeze-protection thermostat, pressure monitoring switch, integrated water filter with biostatic additive |
| Optional Configurations | Stainless steel enclosure, casters, external bypass valve, deionized water compatibility, air-cooled or water-cooled condenser variants |
| Brand | LAUDA |
|---|---|
| Origin | Germany |
| Model | Variocool |
| Cooling Capacity | Up to 10 kW |
| Temperature Range | –20 °C to +40 °C (–20 °C to +80 °C with optional heating module) |
| Temperature Stability | ±0.2 K |
| Max. Pump Pressure | 3.2 bar |
| Max. Flow Rate | 37 L/min |
| Power Supply Options | 208–230 V, 50/60 Hz |
| Optional Modules | Boost Pump, Water-Cooled Condenser, Flow Control, Low-Noise Kit, Outdoor Installation Kit |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | XT 150 |
| Pricing | Upon Request |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | LDZX-50FAS |
| Price | USD 860 (FOB Shanghai) |
| Chamber Volume | 50 L |
| Power Supply | 220 V AC, 50 Hz |
| Heating Power | 3.5 kW |
| Sterilization Chamber Dimensions | Φ350 × 520 mm |
| Net Weight | 75 kg |
| Overall Dimensions | 600 × 580 × 1100 mm |
| Operating Pressure Range | 0.145–0.165 MPa (auto-pressure release) |
| Temperature Range | 116–127 °C (adjustable) |
| Time Setting Range | 0–70 min |
| Safety Features | Low-water cutoff protection, self-sealing gasket, dual-scale Class II pressure gauge, status indicator lights |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | BQ80S |
| Flow Rate Range | 0.0035–34 mL/min |
| Speed Range | 0.1–80 rpm |
| Speed Resolution | 0.1 rpm |
| Speed Accuracy | < ±0.2% |
| Operating Time Range | 0.1 s to 999 days |
| Interval Time Range | 0.1 s to 999 days |
| Dispense Count | 1–999 cycles (0 = continuous) |
| External Control Inputs | Dry-contact or 5–24 V level for start/stop & direction |
| Communication Interface | RS485, Modbus RTU protocol |
| Power Supply | AC 100–240 V, 50/60 Hz (with adapter) |
| Power Consumption | <10 W |
| Noise Level | ≤60 dB(A) |
| Operating Environment | 0–40 °C, RH <80% |
| Enclosure Dimensions (DW10-1) | 152 × 112 × 107 mm |
| Enclosure Dimensions (DW10-3) | 164 × 112 × 107 mm |
| Ingress Protection | IP31 |
| Compatible Pump Heads | DW10-1 (single-channel), DW10-3 (triple-channel) |
| Tubing Compatibility | Wall thickness 0.8–1.0 mm, ID ≤3.17 mm |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | BT100S |
| Flow Rate Range | 0.00011–750 mL/min |
| Speed Range | 0.1–150 rpm |
| Speed Resolution | 0.1 rpm (≤100 rpm), 1 rpm (>100 rpm) |
| Speed Accuracy | < ±0.2% |
| Operating Time Setting | 0.1 s to 999 days (adjustable unit) |
| Interval Time Setting | 0.1 s to 999 days (adjustable unit) |
| Cycle Count | 1–999 cycles (0 = continuous) |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Power Consumption | < 40 W |
| Ambient Temperature | 0–40 °C |
| Relative Humidity | < 80% |
| Dimensions (L×W×H) | 261 × 150 × 237 mm |
| Enclosure Material | Stainless Steel 304 |
| Protection Rating | IP31 |
| Weight | 3.5 kg |
| Communication Interface | RS485, Modbus RTU protocol |
| External Control Inputs | Opto-isolated digital signals (5–24 V), analog inputs (0–5 V / 0–10 V / 4–20 mA) |
| External Status Outputs | Start/Stop, Forward/Reverse logic-level signals |
| Software Compatibility | LF-LCD-OS firmware with bilingual (EN/CN) UI, LeadFluid Mobile App (optional) |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | BT101L |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.00011–750 mL/min |
| Speed Range | 0.1–150 rpm |
| Speed Resolution | 0.1 rpm |
| Speed Accuracy | < ±0.2% |
| Communication Interface | RS485 (Modbus RTU compatible) |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Power Consumption | < 30 W |
| Operating Temperature | 0–40 °C |
| Relative Humidity | < 80% RH |
| Dimensions (L×W×H) | 258 × 180 × 197 mm |
| Weight | 3.6 kg |
| Ingress Protection | IP31 |
| External Control | TTL-level digital input (5 V / 12 V standard, 24 V optional), analog speed control (0–5 V standard, 0–10 V / 4–20 mA optional) |
| Enclosure Material | ABS engineering plastic |
| Isolation Design | Dual-layer circuit isolation with conformal coating |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | BT103S |
| Flow Rate Range | 0.00011–500 mL/min |
| Speed Range | 0.1–100.0 rpm |
| Speed Resolution | 0.1 rpm |
| Speed Accuracy | < ±0.2% |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Power Consumption | < 30 W |
| Operating Temperature | 0–40 °C |
| Relative Humidity | < 80% RH |
| Dimensions (L×W×H) | 235 × 140 × 145 mm |
| Weight | 2.8 kg |
| Protection Rating | IP31 |
| Communication Interface | RS485, Modbus RTU protocol compliant |
| External Control | Digital I/O (5–24 V), Analog Input (0–5 V / 0–10 V / 4–20 mA configurable) |
| Optional Features | Occlusion alarm, leak detection, thermal printer interface, mobile app remote control (via LeadFluid APP) |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | BT300L |
| Flow Rate Range | 0.005–1750 mL/min |
| Speed Range | 0.1–350 rpm |
| Speed Resolution | 0.1 rpm |
| Speed Accuracy | < ±0.2% |
| Operating Temperature | 0–40 °C |
| Relative Humidity | < 80% |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Power Consumption | < 50 W |
| Dimensions (L×W×H) | 292 × 160 × 183 mm |
| Weight | 4.5 kg |
| Protection Rating | IP31 |
| Communication | RS485 (Modbus RTU), DB15 external I/O interface, WiFi (via LeadFluid APP) |
| Control Inputs | Digital (5–24 V), Analog (0–5 V / 0–10 V / 4–20 mA) |
| External Signal Isolation | Galvanically isolated |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | BT300S |
| Flow Rate Range | 0.005–1750 mL/min |
| Speed Range | 0.1–350 rpm |
| Speed Resolution | 0.1 rpm (≤100 rpm), 1 rpm (>100 rpm) |
| Speed Accuracy | < ±0.2% |
| Operating Time & Interval | 0.1–999 s/min/h/d (selectable unit) |
| Cycles | 1–999 (0 = continuous) |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Power Consumption | <50 W |
| Dimensions (L×W×H) | 261 × 150 × 237 mm |
| Weight | 4.3 kg |
| Enclosure Material | Stainless Steel 304 |
| Ingress Protection | IP31 |
| Communication Interface | RS485 (Modbus RTU compatible) |
| External Control | Opto-isolated digital I/O, analog input (0–5 V / 0–10 V / 4–20 mA configurable) |
| Output Signals | Start/Stop, Direction status |
| Certifications | CE-marked per EN 61326-1 (EMC), EN 61010-1 (Safety) |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | BT600L |
| Instrument Type | Peristaltic Pump |
| Flow Rate Range | 0.005–3000 mL/min |
| Speed Range | 0.1–600 rpm |
| Speed Resolution | 0.1 rpm |
| Speed Accuracy | < ±0.2% |
| Operating Time Range | 0.10–99.99 s/min/h (selectable unit) |
| Interval Time Range | 0.1–999.9 s/min/h (selectable unit) |
| Cycle Count | 1–999 (0 = continuous) |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Power Consumption | < 60 W |
| Ambient Operating Conditions | 0–40 °C, RH < 80% |
| Dimensions (L×W×H) | 292 × 160 × 183 mm |
| Enclosure Rating | IP31 |
| Weight | 4.5 kg |
| Delayed Start & Timed Stop | 1 s – 999 h 59 min 59 s |
| Analog Output | 0–5 V (speed status) |
| Digital Interface | RS485, Modbus RTU compliant |
| External Control Input | Start/Stop, Direction (5–24 V logic), Analog 0–5 V / 0–10 V / 4–20 mA configurable |
| Isolated I/O | Yes |
| PCB Protection | Conformal coating (3-layer spray) |
| Thermal Management | Adaptive fan control |
| Housing Material | Stainless steel (304) |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | BT600S |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.005–3000 mL/min |
| Speed Range | 0.1–600 rpm |
| Speed Resolution | 0.1 rpm (≤100 rpm), 1 rpm (>100 rpm) |
| Speed Accuracy | < ±0.2% |
| Operating Time & Interval Range | 0.1–999 s/min/h/d (unit-selectable) |
| Cycle Count | 1–999 (0 = continuous) |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Power Consumption | <60 W |
| Dimensions (L×W×H) | 261 × 150 × 237 mm |
| Weight | 4.3 kg |
| Enclosure Material | Stainless Steel 304 |
| Protection Rating | IP31 |
| Communication Interface | RS485 (Modbus RTU compatible) |
| External Control | Digital I/O (opto-isolated), Analog Input (0–5 V / 0–10 V / 4–20 mA configurable) |
| Output Signals | Run/Stop, Direction status |
| Operating Environment | 0–40 °C, RH <80% |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | TFD02-01 |
| Pump Type | Micro-syringe Pump |
| Flow Rate | 0.184 nL/min to 83.318 mL/min |
| Accuracy | < ±0.35% |
| Repeatability | < ±0.35% |
| Stroke | 110 mm |
| Linear Force | >10 kgf |
| Stroke Resolution | 0.156 µm/µstep |
| Speed Range | 1 µm/min to 150 mm/min |
| Syringe Capacity | 10 µL to 60 mL |
| Communication | RS485, Modbus RTU |
| Power Input | AC 100–240 V, 50/60 Hz |
| Operating Temperature | 5–40 °C, RH <80% |
| Weight | 2.0 kg (controller) + 1.8 kg (drive unit) |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | TFD03-01 |
| Pump Type | Micro-syringe Pump |
| Flow Rate Range | 0.005 nL/min to 152.456 µL/min |
| Accuracy | < ±0.5% |
| Repeatability | < ±0.5% |
| Stroke Resolution | 0.1905 µm/µstep |
| Max Stroke | 70 mm |
| Linear Force | >1 kgf |
| Operating Voltage | AC 100–240 V, 50/60 Hz |
| Communication Interface | RS485, Modbus RTU Protocol |
| Display | 4.3-inch Color TFT Touchscreen |
| Control Modes | Infuse, Withdraw, Infuse-Then-Withdraw, Withdraw-Then-Infuse, Continuous Cycle |
| Syringe Compatibility | 0.5 µL to 100 µL (preloaded OEM profiles + custom ID input) |
| Environmental Rating | 5–40 °C, RH <80% |
| Power Input | Wide-range universal AC input |
| Status Outputs | 2 isolated digital outputs (Run/Stop and Direction) |
| Input Triggers | Two falling-edge digital inputs for Start and Stop control |
| Backlight Adjustment | Yes |
| Keypad Lock & Mute | Yes |
| Parameter Retention | Non-volatile memory with power-loss recovery |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | TFD04 |
| Instrument Type | Micro-volume Syringe Pump |
| Flow Rate Range | 0.184 nL/min – 83.318 mL/min |
| Accuracy | < ±0.5% |
| Repeatability | < ±0.5% |
| Channel Capacity | 1–8 independently controlled channels |
| Syringe Compatibility | 0.5 µL – 60 mL (with interchangeable drive units) |
| Control Interface | 7-inch 65,536-color capacitive touchscreen |
| Communication Protocol | RS485 with Modbus RTU support |
| Input Voltage | AC 100–240 V, 50/60 Hz |
| Operating Temperature | 5–40 °C |
| Relative Humidity | < 80% RH |
| Enclosure | Reinforced metal chassis with corrosion-resistant coating |
| Power Consumption | 40 W (controller) + 30 W per drive unit |
| Dimensions (W×H×D) | 200 × 142 × 88 mm |
| Weight | 2.0 kg (controller only) |
| Brand | LeadFluid |
|---|---|
| Model | TGD01 |
| Type | Microfluidic Syringe Pump |
| Flow Rate Range | 0.001 µL/min to 215 mL/min |
| Accuracy | ≤ ±0.35% (when stroke > 30% of max) |
| Repeatability | ≤ 0.1% |
| Maximum Linear Force | 91 kg |
| Stroke | 140 mm |
| Stroke Resolution | 0.156 µm/µstep |
| Push Speed | 1 µm/min to 190 mm/min |
| Injector Capacity | 0.5 µL to 140 mL |
| Display | 4.3" color LCD with real-time animation |
| Control Interface | Touchscreen + dedicated function keys |
| Communication | RS485, Modbus RTU protocol |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Operating Environment | 5–40 °C, RH < 80% |
| Enclosure Rating | IP31 |
| Weight | 6.6 kg |
| Dimensions | 305 × 222 × 190 mm |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | TSD01-01 |
| Pump Type | Micro-syringe Pump |
| Flow Rate Range | 0.001 µL/min – 100 mL/min |
| Accuracy | ≤ ±0.5% |
| Repeatability | ≤ 0.1% |
| Linear Force | >20 kgf |
| Step Resolution | 0.15625 µm per microstep |
| Travel Speed | 1 µm/min – 150 mm/min |
| Display | 4.3-inch color TFT touchscreen |
| Communication Interface | RS485 (Modbus RTU protocol) |
| Power Input | AC 100–240 V, 50/60 Hz |
| Operating Temperature | 5–40 °C, RH <80% |
| Enclosure | Full-metal, ESD-safe, corrosion-resistant coating |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TYD01-01 (V3) |
| Instrument Type | Microfluidic Syringe Pump |
| Flow Rate Range | 0.184 nL/min – 83.318 mL/min |
| Accuracy | < ±0.35% |
| Repeatability | < ±0.35% |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | TYD01-02 |
| Instrument Type | Micro-syringe Pump |
| Flow Rate Range | 0.184 nL/min – 83.318 mL/min |
| Accuracy | < ±0.35% |
| Repeatability | < ±0.35% |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | TYD02-02 |
| Instrument Type | Microfluidic Syringe Pump |
| Flow Rate | 0.184 nL/min to 173.718 mL/min |
| Accuracy | < ±0.35% |
| Repeatability | < ±0.35% |
| Stroke | 140 mm |
| Linear Force | >20 kgf |
| Stroke Resolution | 0.156 µm/µstep |
| Syringe Capacity Range | 10 µL to 140 mL |
| Line Speed Range | 1 µm/min to 150 mm/min |
| Control Interface | RS485 (Modbus RTU) |
| Power Input | AC 100–240 V, 50/60 Hz |
| Dimensions | 290 × 205 × 180 mm |
| Weight | 4.4 kg |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | TYD02-04 |
| Instrument Type | Micro-syringe Pump |
| Flow Rate Range | 0.001 µL/min to 200 mL/min |
| Accuracy | ≤ ±0.5% |
| Repeatability | ≤ 0.1% |
| Syringe Capacity Support | 10 µL – 10 mL |
| Display | 4.3-inch HD capacitive touchscreen |
| Communication Interface | RS485 with Modbus RTU protocol |
| Mechanical Precision (Stroke Control) | < ±0.35% |
| Bearing System | High-strength aerospace-grade angular contact bearings |
| EMI Resistance | Rated for continuous operation in high-voltage electrostatic fields |
| Power Input | Wide-range AC/DC input |
| Enclosure | All-metal housing with anti-static and corrosion-resistant coating |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | TYD02-10 |
| Instrument Type | Microfluidic Syringe Pump |
| Flow Rate Range | 0.184 nL/min to 24.520 mL/min |
| Accuracy | < ±0.35% |
| Repeatability | < ±0.35% |
| Syringe Capacity | 10 µL to 10 mL |
| Channels | 4 independent syringe drivers |
| Communication Interface | RS485 with Modbus RTU protocol |
| Display | 4.3-inch capacitive touchscreen |
| Power Input | Wide-range AC input (100–240 VAC, 50/60 Hz) |
| Enclosure | All-metal ESD-protected and corrosion-resistant powder-coated housing |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | TYD03-01 |
| Instrument Type | Micro-syringe Pump |
| Flow Rate | 0.037 nL/min to 16.663 mL/min |
| Accuracy | < ±0.35% |
| Repeatability | < ±0.35% |
| Stroke | 110 mm |
| Linear Force Range | 1–100% adjustable (≥16 kgf rated) |
| Syringe Capacity | 10 µL to 60 mL |
| Line Speed | 0.2 µm/min to 30 mm/min |
| Resolution | 0.03125 µm/µstep |
| Communication | RS485, Modbus RTU protocol |
| Power Input | AC 100–240 V, 50/60 Hz |
| Dimensions | 245 × 195 × 140 mm |
| Weight | 3.2 kg |
| Operating Environment | 5–40 °C, RH < 80% |
| Brand | LeadFluid |
|---|---|
| Origin | Hebei, China |
| Model | YD02-01 |
| Pump Type | Microfluidic Syringe Pump |
| Flow Rate Range | 0.001 µL/min – 100 mL/min |
| Accuracy | ≤ ±0.5% |
| Repeatability | ≤ 0.1% |
| Stroke | 140 mm |
| Linear Force | >20 kgf |
| Stroke Resolution | 0.156 µm/µstep |
| Speed Range | 1 µm/min – 150 mm/min |
| Syringe Capacity | 10 µL – 140 mL |
| Display | 4.3-inch Color TFT Touchscreen |
| Communication | RS485, MODBUS RTU Protocol |
| Power Input | AC 100–240 V, 50/60 Hz |
| Dimensions (W×D×H) | 290 × 205 × 180 mm |
| Weight | 4.4 kg |
| Operating Environment | 5–40 °C, <80% RH |
| Brand | Leica Biosystems |
|---|---|
| Origin | Germany |
| Model | CM1520 |
| Maximum Sample Size | 55 mm × 55 mm or 50 mm × 80 mm |
| Section Thickness Range | 2 µm to 60 µm |
| Sectioning Increment | 25 µm + 3 µm step adjustment |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Model | CM1860UV |
| Type | Motorized Cryostat with UVC Disinfection & AgProtect™ Antimicrobial Coating |
| Chamber Temperature Range | –35 °C to –25 °C (adjustable) |
| Section Thickness Range | 0.5–100 µm |
| UVC Lamp Wavelength | 254 nm |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Model | EM RES102 |
| Maximum Sample Size | Ø 25 mm × 12 mm |
| Tilting Angle Range | –90° to +90° (dependent on sample holder) |
| Ion Beam Energy | 0.8 keV to 10 keV (adjustable in 0.1 keV increments) |