Common Laboratory Equipment
Filter
Showing 4921–4950 of 17931 results
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Model | EXPEC 550 |
| Extraction Vessel Capacity | 10–60 mL |
| Operating Pressure Range | Up to 20 MPa |
| Temperature Range | Ambient to 200 °C |
| Cycle Time per Sample | 15–30 min |
| Solvent Consumption | Reduced by ≥70% vs. Soxhlet |
| Safety Compliance | Integrated Leak Detection, Over-Pressure & Over-Temperature Interlocks, Method Validation Alert System |
| Heating Jacket Surface Temp | <50 °C |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 560 |
| Throughput | Up to 36 samples per batch |
| Drive Type | Brushless DC motor with variable-speed control |
| Homogenization Motion | Vertical reciprocating + rotational motion |
| Cleaning Modes | Aqueous rinse, organic solvent rinse, ultrasonic-assisted cleaning |
| Enclosure | Full-integrated transparent safety door with interlock |
| Safety Compliance | CE-marked per EN 61000-6-2/6-4 and EN 61000-3-2/3-3 |
| Software Interface | Touchscreen HMI with method storage, real-time status monitoring, and fault logging |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Model | EXPEC 570 |
| Configuration Options | 2-, 6-, 8-channel & PFA-dedicated variants |
| Origin | Zhejiang, China |
| System Architecture | Integrated touchscreen-controlled platform with internal waste segregation |
| Sample Throughput | Batch-mode processing for up to 8 samples simultaneously (model-dependent) |
| Flow Control | Precision syringe-pump-driven elution with column-seal plug design |
| Compatibility | Standard 1 mL–6 mL SPE cartridges (C18, HLB, Florisil, SAX, SCX, PFA-lined, etc.) |
| Optional Modules | Large-volume aqueous sample enrichment (>500 mL), custom cartridge adapters, GLP-compliant audit trail upgrade |
| Brand | EXPEC (Puyu Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 750 |
| Flow Rate Range | 0.5–600 mL/min |
| Channel Capacity | 6 parallel channels |
| Operation Modes | Fully automated activation, sample loading, washing, and elution with programmable sequence editing |
| Sample Processing Time | 10–20 min per batch |
| Compatibility | Integrated interface for AFS, ICP-OES, and ICP-MS instrumentation |
| Column Type | Pressure-rated separation column with closed-loop fluidic control |
| Precision Feature | Automatic final volume adjustment (auto-dilution/evaporation compensation) |
| Regulatory Context | Designed to support GLP-compliant workflows and traceable sample preparation under ISO/IEC 17025 laboratory accreditation requirements |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 760 |
| Balance Options | 0.01 mg (10 µg) or 0.1 mg resolution |
| Anti-static Ionizer | Integrated dual-nozzle air ionization system |
| Robotic Arm | 4-axis articulated robot with ±0.05 mm repeatability |
| Vibration Isolation | Triple-stage passive damping platform |
| Weighing Enclosure Control | Motorized draft shield door actuation synchronized with weighing cycle |
| Sample Tube Handling | Barcode-scanned vial identification, automated cap removal/placement in dedicated sterile zone |
| Data Output | CSV/Excel export, audit-trail-enabled database logging compliant with GLP requirements |
| Compliance | Designed to support ISO/IEC 17025 workflows and FDA 21 CFR Part 11–ready data integrity architecture |
| Brand | EXPEC (Hangzhou Puyu Technology Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 780 |
| Heating Block Material | High-Purity Graphite |
| Automation Level | Full Unattended Operation |
| Acid Resistance | PTFE/PFA-Wetted Components Compatible with HNO₃, HCl, HF, and HClO₄ |
| Temperature Control | PID-Controlled Distributed Heating |
| Temperature Range | Ambient to 230 °C |
| Sample Capacity | Up to 48 Positions (Configurable) |
| Acid Addition | Six Independent Peristaltic Pumps + Precision Syringe Pump for Spiking |
| Lid Handling | Motorized Lid Sealing/Unsealing with Condensation-Optimized Design |
| Volume Accuracy | <1% RSD at 50 mL (Ultrasonic Level Sensing) |
| Volume Range | 5–50 mL |
| Mixing Method | Pneumatic Bubble Agitation |
| Sample Transfer | Integrated Robotic Arm to Autosampler Tray |
| Exhaust System | Dedicated Acid-Fume Extraction with Corrosion-Resistant Ducting |
| Compliance | Designed for GLP/GMP Environments |
| Brand | EXPEC (Puyu Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 790F |
| Maximum Operating Temperature | 300 °C |
| Maximum Operating Pressure | 20 MPa |
| Safety Vessel Rating | 30 MPa |
| Digestion Cavity | Single-zone, uniform temperature/pressure |
| Sample Capacity | Up to 96 samples per batch (configurable rotor: 6/8/18/24 positions) |
| Acid Volume Range | 2–3 mL per sample |
| Final Volume Accuracy | <1% RSD at 50 mL (5–50 mL range) |
| Reagent Delivery | PTFE-lined peristaltic pumps & precision syringe pump |
| Filtration | Auto-replacement disposable filter cartridges |
| Interface | ICP-OES/ICP-MS direct coupling support |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | EXPEC 790S |
| Pricing | Available Upon Request |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | FAAS 8000 |
| Pricing | Available Upon Request |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Pre 3900 |
| Pricing | Upon Request |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Pre 4000 |
| Pricing | Available Upon Request |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Pre 4100 |
| Pricing | Available Upon Request |
| Origin | Shanghai |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SY-100 |
| Pricing | Available Upon Request |
| (Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GL-20 |
| Pricing | Available Upon Request) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | EX-TE |
| Pricing | Available Upon Request |
| Vessel Capacities | 3–100 L (6 Models: EX-TE-03 to EX-TE-100) |
| Design Pressure (Inner Vessel) | 0.09 MPa |
| Jacket Design Pressure | 0.3–0.4 MPa |
| Heating Power | 3–15 kW |
| Agitation Power | 0.09–0.5 kW |
| Temperature Control Range | Ambient to 120 °C |
| Optional Ultrasonic Frequency Range | 15–60 kHz (Pulsed or Continuous Mode) |
| Integrated Sensors | Real-time monitoring of extraction temperature, heating temperature, pH, vacuum level, agitation speed/type, and liquid level |
| Key | Brand: The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Capacity | 20 L |
| Ultimate Vacuum | ≤2 kPa/h |
| Rotation Speed | 0–180 rpm |
| Bath Temperature Range | Ambient +5 °C to 95 °C |
| Temperature Control Accuracy | ±1 °C |
| Condensing Area | Main Condenser 0.390 m² |
| Power Supply | 3-phase, 380 V, 50 Hz |
| Protection Class | IP20 |
| Pollution Degree | 2 |
| Max Evaporation Rate (Water) | 5 L/h |
| Bath Material | 06Cr19Ni10 Stainless Steel (AISI 304 equivalent) |
| Glass Components | DIN 3.3 Borosilicate Glass |
| Sealing Leakage Rate | ≤0.03 kPa/min |
| Heating Power | 4000 W |
| Rotating Motor Power | 370 W |
| Total Power Consumption | 4500 W |
| Dimensions (with glassware) | 1210 × 740 × 2040 mm (W×D×H) |
| Weight (with glassware) | 190 kg |
| Brand | Zhengxin Instrument Factory (ZXYIQI) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | WEP-150ML |
| Price | ¥57,000 |
| Usable Volume | Small-scale |
| Vessel Material | Stainless Steel (304/316L standard) |
| Operating Pressure | Low-pressure range |
| Rated Capacity | 100 mL |
| Vacuum Range | 0 to –0.1 MPa (Note: “0–40MPA” in source is physically invalid |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CA |
| Cooling Capacity | 1200 W (1030 kcal/h) at 10°C bath temperature |
| Temperature Range | −20 to +30°C |
| Temperature Stability | ±2°C |
| Circulation Flow Rate | 16 L/min (max), 27 L/min (external pump option) |
| Max Head | 9.5 m |
| Reservoir Volume | 14 L (16.5 L total) |
| Refrigerant | R407C |
| Compressor Power | 675 W (air-cooled) |
| Reservoir Material | SUS304 stainless steel |
| Cooling Coil Material | Nickel-plated copper |
| External Port Fitting | 11 mm OD tubing |
| Dimensions (W×D×H) | 340 × 384 × 851 mm |
| Weight | 41 kg |
| Control Interface | Touch-key input with LCD display (0.1°C resolution) |
| Safety Features | Leakage/overcurrent protection, high-pressure switch, overload relay, compressor protection timer, 2 A fuse for peripheral sockets, self-diagnostic thermostat, circulation pump thermal protector |
| I/O Ports | Recorder output, alarm output |
| Certifications | Complies with JIS B 8603, CE-marked per EN 61000-6-3 & EN 61000-6-2 |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | CA-1116A |
| Temperature Range | −20 to 30 °C (without heater) |
| Temperature Stability | ±2 °C |
| Cooling Capacity | 1100 W at 10 °C, 840 W at 0 °C, 510 W at −10 °C |
| Max. Flow Rate | 12 L/min |
| Max. Head | 9.5 m |
| Reservoir Volume | ~16.5 L (Ø280 × H270 mm) |
| Reservoir Material | SUS304 Stainless Steel |
| Refrigerant | R407C (HFC blend) |
| Compressor Control | ON/OFF |
| Temperature Display | LED digital, 1 °C resolution |
| Safety Features | Leakage/overcurrent protection, high-pressure compressor switch, compressor protection timer, self-diagnostic thermostat, pump auto-protection |
| Power Supply | AC 220 V, 50 Hz, 1.1 kVA, 5.5 A |
| Ambient Operating Temperature | 5–35 °C |
| Dimensions (W×D×H) | 354 × 384 × 851 mm (excl. water nozzles) |
| Net Weight | 41 kg |
| Cooling Method | Air-cooled |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CA-1310 |
| Cooling Capacity | 1200 W (1030 kcal/h) at 10°C liquid temperature |
| Temperature Range | −20 to +20°C |
| Temperature Stability | ±2°C |
| External Flow Rate | Up to 16 L/min |
| Max. Head | 9.5 m |
| Reservoir Volume | 13 L (usable liquid volume: 10.5 L) |
| Refrigerant | R407C |
| Compressor Control | ON-OFF |
| Display Resolution | 0.1°C |
| Power Supply | Air-cooled, 675 W |
| Tank Material | SUS304 stainless steel |
| Dimensions (W×D×H) | 460 × 430 × 570 mm |
| Weight | ~44 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CA-1320 |
| Cooling Capacity | 1050 W (903 kcal/h) at 10°C liquid temperature |
| Temperature Range | −20 to +20°C |
| Temperature Stability | ±2°C |
| Circulation Flow Rate | Up to 16 L/min |
| Max. Head | 9.5 m |
| Reservoir Volume | 13 L (usable liquid volume: 10.5 L) |
| Refrigerant | R407C |
| Compressor Control | ON-OFF |
| Display Resolution | 0.1°C |
| Reservoir Material | SUS304 stainless steel |
| Dimensions (W×D×H) | 460 × 430 × 570 mm |
| Weight | ~48 kg |
| Cooling Method | Air-cooled |
| Power Consumption | 675 W |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CCA |
| Cooling Capacity | 450 W (387 kcal/h) at 10°C liquid temperature |
| Temperature Range | –20°C to +20°C |
| Temperature Stability | ±2°C |
| Circulation Flow Rate | Up to 9 L/min (external pump: up to 14 L/min) |
| Max Head | 4.2 m |
| Reservoir Volume | ~4 L |
| Reservoir Material | SUS304 stainless steel |
| Cooling Circuit | Closed-loop |
| Refrigerant | R407C |
| Compressor Type | Air-cooled, 350 W output |
| Temperature Control | ON-OFF refrigeration control |
| Display & Input | Touch-key LCD, 0.1°C resolution |
| Safety Features | Leakage/overcurrent protection, compressor overload protection, self-diagnostic system (compressor fault, power failure alarm, sensor error), circulation pump thermal protection |
| I/O Ports | Recorder output, alarm output |
| Cooling Coil Material | Nickel-plated copper |
| Inlet/Outlet Fitting | 11 mm OD compatible |
| Dimensions (W×D×H) | 232 × 497 × 490 mm |
| Weight | ~29 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CCR-1000G |
| Reactor Type | Flow-through Catalytic Hydrogenation System |
| Max Operating Pressure | 0.4 MPa |
| Temperature Range | Ambient +15°C to 200°C (Aluminum Block Heating Block) |
| Liquid Flow Rate | Up to 0.9 mL/min |
| Gas Flow Rate | Up to 100 mL/min (H₂) |
| Catalyst Cartridge | Stainless Steel Column (Ø5 × 50 mm, replaceable) |
| Wetted Materials | PP (reaction reservoir), Fluoropolymer (fluidic pathways), Perfluoroelastomer (O-rings), SUS316 (glass support components) |
| Power Supply | AC 100 V, 50/60 Hz, 2.5 A, 250 VA |
| Dimensions (W×D×H) | 356 × 461 × 389 mm |
| Safety Features | Pressure-sensor-triggered emergency shutdown, independent overtemperature protection for heating block, heater overload protection, leakage and overcurrent protection, self-diagnostic system, communication failure detection |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CCX |
| Temperature Control Range (CCX-1000/1010) | RT + 10°C to 160°C (with external chiller) |
| Temperature Control Range (CCX-1200/1210) | −78°C to RT (using dry ice/acetone or cryogenic circulator) |
| Number of Reaction Vessels | 1–12 |
| Reaction Volume per Vessel | 3–15 mL (max. 25 mL) |
| Stirring Method | High-torque magnetic stirring |
| Stirring Speed | 100–1200 rpm (in water) |
| Temperature Setting & Display | Digital PID controller with membrane keypad input and LED display (CCX-1000/1010) |
| Stirring Speed Control | Rotary knob |
| Reflux Capability | Integrated high-efficiency reflux condenser (CCX-1000/1010) |
| Gas Purging | Vacuum-assisted inert gas (N₂/Ar) exchange via septum-sealed ports |
| Vessel Compatibility | Standard Φ24 × 150 mm glass tubes (straight-mouth and flanged types), PTFE caps, nitrile rubber seals |
| Wetted Materials | Borosilicate glass, PTFE, nitrile rubber |
| External Dimensions (stand only) | 245 W × 275 D × 800 H mm |
| Weight | ~8 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | CCX-3200 |
| Tube Capacity | 1–8 (up to 32 with adapter) |
| Reaction Volume per Tube | 0.5–60 mL |
| Temperature Range | RT +10°C to 280°C (max 200°C at 50–60 mL load) |
| Rotation Speed | ~100–1200 rpm (in water) |
| Heating Method | Electric block heater with PID control |
| Stirring Type | High-strength magnetic stirring |
| Condensation Mode | Optional reflux via coolant-split head and condenser |
| Vessel Compatibility | DURAN® borosilicate glass tubes (Φ12–34 mm, 12 sizes, max height 50 mm) |
| Gas Handling | Compatible with Schlenk lines, sealed tubes, pressure-rated vessels, and Dean-Stark traps |
| Dimensions (W×D×H) | 245 × 275 × 800 mm (stand only) |
| Weight | ~8 kg |
| Compliance | Designed for GLP-compliant synthetic laboratories |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CCX-3200 |
| Reaction Vessel Capacity | 0.5–60 mL |
| Number of Reaction Positions | 1–8 (up to 32 with optional adapter kits) |
| Temperature Range | Ambient +10°C to 280°C (max 200°C at 50–60 mL load) |
| Stirring Speed | ~100–1200 rpm (in water) |
| Stirring Type | High-strength magnetic coupling |
| Temperature Control | Digital keypad setting & LED display |
| Stirring Control | Analog knob adjustment |
| Reflux Capability | Optional water-cooled split-head condenser |
| Reagent Addition | Via pipettes, droppers, or calibrated dispensers |
| Wetted Materials | DURAN® borosilicate glass |
| Tube Diameter Compatibility | Φ12–34 mm (12 standard sizes), max height 50 mm |
| External Dimensions (W×D×H) | 245 × 275 × 800 mm (stand only) |
| Weight | ~8 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | CVE-2000 |
| Rotational Speed | 1400 rpm (fixed) |
| Temperature Control Range | Ambient +5°C to 80°C |
| Ultimate Vacuum (internal pump) | 3 kPa |
| Ultimate Vacuum (external pump) | ≤1.33 kPa |
| Chamber Dimensions | Ø160 mm × H105 mm |
| Rotor Capacity | 24 × 1.5 mL microtubes (Ø10.8 mm) |
| Chamber & Tubing Material | Chemically Resistant Polymer Alloy |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | DDL-1000 / DDL-2000 |
| Reactor Type | Jacketed Laboratory Reactor System |
| Temperature Control Modes | Reaction Mass Control, Jacket Control, Isothermal Mode, Gradient Ramp Mode |
| Stirring | Mechanical Agitation (PTFE or SUS304 Impeller) |
| Temp. Range | 10–80 °C (Jacket) |
| Temp. Stability | ±0.1 °C |
| Stirring Speed | 10–1059 rpm |
| Max. Torque | 19.6 N·m (DDL-1000), 0.49 N·m (DDL-2000) |
| Cooling Rate (Jacket) | up to 30 K/min |
| Heating Rate (Jacket) | up to 7.0 K/min |
| Safety Systems | Independent Over-Temperature Protection, Leakage Current Breaker, Low-Coolant-Level Alarm, Emergency Rapid-Cooling Function, SSR Failure Detection, Dual Temperature Limit Alarms |
| Power Supply | AC 100 V, 50/60 Hz (7 A / 700 VA for DDL-1000 |
| Dimensions & Weight | 290×380×790 mm, 20 kg (DDL-1000) |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | DDS |
| Reactor Capacity | 4 × (50 / 100 / 250 mL, independent) |
| Temperature Control Range | −50 to 250 °C (requires external chiller) |
| Temperature Accuracy | ±0.5 K (−20–100 °C, aluminum block), ±1 K (100–180 °C, aluminum block) |
| Stirring Speed | 125–1000 rpm |
| Max. Heating Rate | Tr < 5.3 K/min, Tj < 19.3 K/min (250 mL water in glass reactor) |
| Max. Cooling Rate | Tr < 7.2 K/min, Tj < 29.6 K/min (250 mL water) |
| Max. Heat Removal Capacity | 0.74–1.1 W/g (200 mL water) |
| Heat Flow Measurement Resolution | 0.1 W, ±5% error (standard conditions) |
| Control Modes | Reactor temperature, aluminum block temperature, gradient, isothermal |
| Control Method | PID heating/cooling + cascade control |
| Liquid Addition | 8-channel volumetric dosing |
| Agitation Type | Propeller stirring |
| Optional pH Control | 0–14, acid/base titration |
| Heat Measurement Principle | Thermal conductivity-based calorimetry with calibration |
| Data Visualization | Real-time & historical trend graphs |
| Safety Systems | Leakage current protection, independent overtemperature cutoff, motor overload protection, software self-diagnosis |
| Flask Ports | Rodaviss 24, NS 14/23 (×3), GL 14 (×1) |
| Vessels | Borosilicate glass, round-bottom, graduated (50 mL or 250 mL) |
| Wetted Materials | Glass, PTFE, PPS, Karlez®, SUS316 |
| Dimensions (W×D×H) | 650 × 490 × 380 mm |
| Weight | ~59 kg |
| Power Supply | AC 100 V, 50 Hz, 2000 VA, 20 A |