Common Laboratory Equipment
Filter
Showing 4951–4980 of 17931 results
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | FDL-1000 / FDL-2000 |
| Cold Trap Temperature | −45 °C (FDL-1000) / −80 °C (FDL-2000) |
| Ice Capacity | 4 L/24 h (FDL-1000) / 3 L/24 h (FDL-2000) |
| Cold Trap Dimensions | Ø200 × 300 mm, SUS304 |
| Vacuum Gauge | Pirani gauge, 0.0–533 Pa (digital display) |
| Refrigeration System | FDL-1000 — 600 W, R404A |
| Vacuum Pump Interface | Optional, 100/120 L/min (50/60 Hz) |
| Display | 3.4-inch TFT LCD with membrane keypad |
| Power Supply | Dedicated socket for freeze-drying chamber (max. 3 A) |
| External Dimensions (W×D×H) | 700 × 550 × 955 mm |
| Net Weight | ~116 kg (FDL-1000) / ~144 kg (FDL-2000) |
| Safety Features | Leakage current protection, overcurrent protection, compressor protection circuit, service outlet fuse, self-diagnostic control panel, automatic venting upon vacuum release |
| Optional Accessories | Ice mass sensor, data logging output (analog), 0.2 µm inlet filter, defrost function, power recovery timer |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | FDM-1000 |
| Cold Trap Temperature | −45 °C |
| Condensation Capacity | 1 L/24 h |
| Display | 3.4″ LCD (button-operated) |
| Vacuum Gauge | Digital Pirani gauge (0.0–533 Pa) |
| Cold Trap Dimensions | Ø200 × 175 H mm (SUS304) |
| Refrigeration System | Air-cooled compressor (450 W, R507A) |
| Vacuum Pump Interface | Dedicated socket (max. 6 A), compatible with ≥50 L/min pumps |
| Power Supply | 7 A total (230 V AC, 50/60 Hz) |
| External Dimensions & Weight | 450 W × 420 D × 460 H mm / ≈38 kg |
| Safety Features | Leakage and overcurrent protection, compressor protection circuit, panel self-diagnostic function, vacuum release valve (0.2 µm filter), hot-gas defrost, power-fail recovery logic |
| Optional Functions | Vacuum pump auto-start/stop, real-time vacuum & cold trap temperature monitoring, elapsed time counter (vacuum pump runtime), automatic end-of-drying detection, vacuum auto-bleed post-cycle |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | FDM-2010 |
| Cold Trap Temperature | −80 °C |
| Condensation Capacity | 1 L/24 h |
| Display | 3.4-inch LCD |
| Vacuum Gauge | Digital Pirani gauge (0.0–533 Pa) |
| Cold Trap Dimensions | Ø153 × 225 H mm, SUS304 |
| Refrigeration System | Dual 500 W compressors, HFC blend (R290/R170) |
| Vacuum Pump Interface | Dedicated 125 V/6 A outlet (pump not included |
| Freeze Drying Chamber Interface | Dedicated 125 V/2 A outlet |
| Overall Dimensions | 450 W × 550 D × 945 H mm |
| Net Weight | ~81 kg |
| Safety | Leakage current protection, overcurrent cutoff, compressor thermal protection, self-diagnostic control panel, vacuum release valve with 0.2 µm particulate filter, hot-gas defrost system |
| Functions | Auto-vacuum start/stop, vacuum & cold trap temperature monitoring, elapsed time logging (for pump runtime and sublimation duration), power-failure recovery, automatic vacuum break post-cycle |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | FDU-2110 |
| Cold Trap Temperature | −80 °C |
| Condensation Capacity | 3 L per 24 h |
| Vacuum Range | 0.4–533 Pa (Pirani gauge, digital display) |
| Cold Trap Dimensions | Φ200 × 300 mm (SUS304 stainless steel) |
| Refrigeration System | 500 W dual-stage compressor, R404A/R23 refrigerant blend |
| Defrost Method | Hot-gas auto-defrost with thermal cutoff |
| Vacuum Release | Motorized solenoid valve with 0.2 µm sterile air filter |
| Power Supply | Vacuum pump circuit — max. 6 A |
| Overall Dimensions & Weight | 700 × 550 × 935 mm (W×D×H), approx. 140 kg |
| Safety Features | Leakage/overcurrent protection, compressor protection circuit, control panel self-diagnosis, fuse for service outlet |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | MF-1000 |
| Rotation Speed Range | 100–1200 rpm |
| Max. Evaporation Rate | 760 mL/h (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Type | Vertical double-coil |
| Collection Flask | 1 L spherical flask (S35/20) |
| Condenser & Vacuum Interface | Quick-connect, OD 10 mm × 2 each |
| Wetted Materials | Borosilicate glass, SUS 304 stainless steel, PTFE |
| Dimensions (W×D×H) | 490 × 350 × 930 mm |
| Weight | 17 kg |
| Power Supply | AC 100 V, 50/60 Hz, 2 A, 200 VA |
| Drive Motor | Brushless DC motor |
| Shaft Sealing | Magnetic coupling |
| Bearing | Ceramic lower bearing |
| Stirring Element | Removable PTFE-coated blade with smooth, non-porous surface |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | MF/F |
| Drive Type | DC brushless motor with 6-point rotor coupling |
| Heating Method | Steam or recirculating water bath |
| Vacuum Operation Range | Down to 1.33 Pa (10 mTorr) |
| Evaporation Area | 0.04–0.25 m² (glass or SUS316L evaporator sleeves) |
| Condenser Surface Area | 0.3–3.0 m² (multi-layer coiled or triple-coil design) |
| Collection Flask Capacity | 1–20 L (evaporate + concentrate) |
| Max. Feed Viscosity | 1.0–1.5 Pa·s (1000–1500 cP) |
| Rotational Speed Range | 140–1800 rpm (infinitely variable, 50/60 Hz) |
| Evaporation Rate | Up to 40 L/h (steam-heated, F-200 model) |
| Sealing System | Magnetic drive shaft (F-70/F-150), mechanical seal (F-200), vacuum-rated elastomer gasket (MF-10A) |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | MGS |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Accuracy | ±0.1–0.2°C |
| Control System | Microcomputer-based P.I.D. temperature control |
| Display Resolution | 0.1°C (digital LED) |
| Heating Block | Single aluminum block (90W × 125D × 70H mm), SUS304 stainless steel sample tubes (1.6 mm ID × 180 mm length) |
| Gas Filtration | Integrated 0.2 µm hydrophobic filter |
| Gas Flow Regulation | Adjustable needle valve (9 mm OD inlet connection) |
| Safety Features | Dual-limit temperature alarm, power failure detection, heater runaway protection, independent over-temperature cutoff, Pt100Ω sensor monitoring, fuse protection |
| Programmability | Two-stage program control, auto-start/stop, auto-tuning, temperature display calibration |
| Operating Ambient | 5–35°C |
| Dimensions & Weight | 240W × 310D × 600H mm, 7.5 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | N-1100D |
| Capacity | 5 L |
| Ultimate Vacuum | 0.08 MPa (80 kPa) |
| Rotation Speed | 20–200 rpm |
| Temperature Range | Ambient +5 °C to 180 °C |
| Temperature Control Accuracy | ±1 °C |
| Cooling Surface Area | 0.146 m² |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1100D-W |
| Rotation Speed | 20–180 rpm |
| Max. Evaporation Rate | 18 mL/min |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Temperature Control Range (N-1100D-W) | RT +5 to 90°C (water bath) |
| Temp. Accuracy | ±1.5°C (water), ±3.0°C (oil) |
| Heating Power | 1 kW |
| Condenser Type | Vertical double-layer coiled condenser |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity (standard) | 1 L (max. 3 L) |
| Bath Dimensions | Ø230 × 100 mm (≈3 L) or Ø240 × 120 mm (≈5.5 L) |
| Lift Stroke | 100 mm (manual lift) + 150 mm (auxiliary slide extension) |
| Overall Dimensions | 535 × 355 × 790 mm (11 kg) or 550 × 380 × 790 mm (13 kg) |
| Safety Features | Thermal fuse, dry-run prevention sensor |
| Sealing | Dual-material seal (PTFE + fluororubber) |
| Standard Joint Sizes | 29/38 (evaporating flask), S35/20 (receiving flask) |
| Control | Microprocessor-based ON-OFF temperature control with membrane keypad and digital display |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-1100S-W |
| Rotation Speed | 20–180 rpm |
| Max. Evaporation Rate | 18 mL/min |
| Ultimate Vacuum | <399.9 Pa (≤3 mmHg) |
| Temperature Range (Water Bath) | RT+5°C to 90°C |
| Temperature Range (Oil Bath, optional) | RT+5°C to 180°C |
| Temp. Control Accuracy | ±1.5°C (water), ±3.0°C (oil) |
| Heating Power | 1 kW |
| Condenser Type | Inclined double-layer coiled coil |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity | Standard 1 L (max 3 L), Standard Taper: 29/38 |
| Collection Flask | 1 L spherical, Joint: S35/20 |
| Vertical Travel | 100 mm (manual lift) + 150 mm (auxiliary extension) |
| Bath Dimensions | Ø230×100 mm (≈3 L) or Ø240×120 mm (≈5.5 L) |
| Unit Dimensions & Weight | 710×355×510 mm, 11 kg (base config) |
| Sealing | Dual-material PTFE/fluoroelastomer vacuum seal |
| Safety Features | Thermal cut-off fuse, dry-run prevention sensor |
| Optional Integration | Compatible with DPE-1300/DPE-1400 solvent recovery units and NVC-series vacuum controllers |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1100S / N-1100SF |
| Rotation Speed | 20–180 rpm |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | <399.9 Pa (3 mmHg) |
| Bath Temperature Range | RT+5°C to 90°C (N-1100S-W / N-1100SD) or RT+5°C to 180°C (N-1100S-WD) |
| Temp. Control Accuracy | ±1.5°C (water bath, rotating flask) / ±3.0°C (oil bath, rotating flask) |
| Heating Power | 1 kW |
| Condenser | Inclined double-layer coiled tube, cooling area: 0.146 m² |
| Flask Capacity | 1 L pear-shaped (ISO NS29/38) or 500 mL pear-shaped (transparent joint, NS29/38) |
| Receiver | 1 L spherical (ISO S35/20) |
| Shaft Dimensions | ID 18 mm × L 272 mm, TS29/38 |
| Vacuum Seal | Dual-material PTFE/Viton gasket |
| Air Filter | 0.2 µm disk filter (N-1100SD/SFD only) |
| Lift Travel | 100 mm (counterbalanced slide) + 150 mm (manual extension) |
| Bath Dimensions & Capacity | Ø230×100H mm (3 L, water-only) or Ø240×120H mm (5 L, water/oil) |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-1100V-W |
| Rotational Speed | 20–180 rpm |
| Max. Evaporation Rate | 18 mL/min |
| Ultimate Vacuum | <399.9 Pa (≤3 mmHg) |
| Bath Temperature Range (N-1100V-W) | +5°C to 90°C above ambient |
| Temperature Control Accuracy | ±1.5°C (water bath), ±3.0°C (oil bath) |
| Heating Power | 1 kW |
| Condenser Type | Vertical double-layer coiled condenser |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity | Standard 1 L (max. 3 L), 29/38 standard taper joint |
| Collection Flask | 1 L spherical flask, S35/20 ground joint |
| Lift Mechanism | Manual dual-stage lift (100 mm primary + 150 mm auxiliary extension) |
| Bath Dimensions & Capacity | Ø230 mm × 100 mm depth (~3 L) or Ø240 mm × 120 mm depth (~5.5 L) |
| Overall Dimensions & Weight | 535 W × 355 D × 790 H mm / 11.5 kg (standard configuration) |
| Safety Features | Thermal fuse, dry-run prevention sensor |
| Sealing | Dual-material vacuum seal (PTFE + fluororubber) |
| Glassware | VF-type explosion-resistant coated glass (all condenser, collection, and four-way flasks) |
| Brand | EYELA (Tokyo Rikakikai) |
|---|---|
| Origin | Japan |
| Model | N-1100V-W/WD |
| Evaporation Capacity | Max. 25 mL/min |
| Rotational Speed | 20–180 rpm |
| Ultimate Vacuum | < 399.9 Pa |
| Bath Temperature Range | Room Temp +5°C to 90°C |
| Heating Control Accuracy | ±0.5°C (typical for PID-controlled water/oil bath) |
| Cooling Surface Area | 0.146 m² |
| Evaporating Flask Capacity | 3 L |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-1200AV / N-1200AVF-W / N-1200AVF-WD |
| Rotational Speed | 5–280 rpm |
| Max. Evaporation Rate | 25 mL/min |
| Ultimate Vacuum | < 399.9 Pa (≤ 3 mmHg) |
| Water Bath Temp. Range | RT + 5°C to 90°C |
| Oil/Water Dual Bath Temp. Range | RT + 5°C to 180°C |
| Temp. Control Accuracy | ±1.5°C (water) / ±3°C (oil) |
| Temperature Control Method | Microcomputer-based ON-OFF control |
| Heating Power | 1.05 kW |
| Condenser Type | Vertical double-coil |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity | Standard 1 L (up to 3 L compatible) |
| Bath Dimensions & Volume | Ø240 × 120 mm (shallow zone Ø160 mm), ~5.4 L |
| Lift Stroke | 100 mm (manual rack) + 130 mm (handle extension) |
| Overall Dimensions & Weight | 595 W × 445 D × 700 H mm, 16.5 kg |
| Safety Features | Thermal fuse, dry-run prevention sensor |
| Sealing Material | PTFE vacuum seal |
| Condenser & Flask Joints | Standard taper 29/38 (flask), S35/20 (receiving flask) |
| Shaft | Short-type glass rotary shaft, ID 18 mm × L 178 mm |
| Quick-Connect Fitting | Integrated push-fit interface for chiller hose coupling |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1200BT/BTF-W/WD |
| Capacity | 1 L (max 3 L) |
| Ultimate Vacuum | 399.9 Pa (≤3 mmHg) |
| Rotation Speed | 5–280 rpm |
| Bath Temperature Range | Water bath: RT+5 to 90°C |
| Oil/water bath | RT+5 to 180°C |
| Temperature Control Accuracy | ±1.5°C (water), ±3°C (oil) |
| Evaporation Rate | Max. 25 mL/min |
| Condenser Surface Area | 0.12 m² |
| Heating Power | 1.05 kW |
| Lift Stroke | 100 mm (motorized) + 130 mm (manual extension) |
| Dimensions (W×D×H) | 585 × 455 × 700 mm |
| Weight | 19.4 kg |
| Condenser Type | Wide-mouth vertical coil (Ø110 × 340 mm, internal Ø91 × 230 mm) |
| Flask Standard Taper | 29/38 (evaporating), S35/20 (receiving) |
| Sealing Material | PTFE vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1210BS-WB |
| Capacity | 5.4 L |
| Ultimate Vacuum | 10 hPa (≈7.5 Torr) |
| Rotation Speed | 5–280 rpm |
| Bath Temperature Range | Ambient to 180 °C (±1.5 °C for water, ±3 °C for oil) |
| Evaporation Rate | Max. 25 mL/min (water) |
| Condenser Cooling Area | 0.146 m² |
| Bath Dimensions | Ø240 × 120 mm (H) |
| Power | 1.2 kVA |
| Weight | 18 kg |
| Electrical Supply | AC 220 V, 50 Hz |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1210BS-WB |
| Bath Temperature Range | Room Temp. to 180 °C (±1.5 °C in water, ±3 °C in oil) |
| Rotational Speed Range | 5–280 rpm |
| Evaporation Rate (Water) | Up to 25 mL/min |
| Bath Capacity | ~5.4 L |
| Bath Dimensions (ID) | 240 mm × 120 mm H |
| Bath Material | Aluminum with PTFE Coating |
| Heating Power | 1 kW |
| Vertical Travel | Motorized lift 110 mm + manual extension 130 mm |
| Condenser Type | Tilted dual-spiral coil |
| Flask Capacity | 1–3 L (evaporating), 1 L (receiving) |
| Vacuum Seal | PTFE sealing gasket |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Supply | AC 220 V, 5.5 A, 1.2 kVA, 50 Hz |
| Operating Ambient | 5–35 °C |
| Dimensions (W×D×H) | 729 × 433 × 520 mm (750 mm with lift extended) |
| Weight | 18 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300D |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Motor | Brushless DC |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Input | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Dimensions (W×D×H) | 578×352×645 mm (N-1300D-W) / 565×352×645 mm (N-1300D-WB) |
| Weight | 12.7 kg (N-1300D-W) / 13.3 kg (N-1300D-WB) |
| Bath Capacity | 4.3 L (SB-1300, stainless steel SUS304) / 5.4 L (OSB-2200, aluminum with PTFE coating) |
| Sealing | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Shanghai, China |
| Model | N-1300D-W |
| Capacity | 3 L |
| Ultimate Vacuum | 0.08 MPa |
| Rotation Speed | 10–310 rpm |
| Bath Temperature Range | Ambient to 90 °C |
| Temperature Control Accuracy | ±1 °C |
| Cooling Surface Area | 1200 cm² |
| Bottle Mounting | Dual-side (left/right) adjustable |
| Vertical Travel | 180 mm continuous lift |
| Base | Rotatable circular platform with free-angle positioning |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300S |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Motor | Brushless DC |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Supply | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Dimensions (W×D×H) | 736×352×504 mm (N-1300S-W) / 724×352×504 mm (N-1300S-WB) |
| Weight | 12.1 kg (N-1300S-W) / 12.7 kg (N-1300S-WB) |
| Bath Capacity | 4.3 L (SB-1300, stainless steel SUS304) / 5.4 L (OSB-2200, aluminum with PTFE coating) |
| Sealing | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300V |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Power Input | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Heating Power | 1.3 kW |
| Bath Dimensions (SB-1300) | Ø220 × 120 mm H, ~4.3 L (SUS304) |
| Bath Dimensions (OSB-2200) | Ø240 × 120 mm H, ~5.4 L (aluminum with PTFE coating) |
| Weight | 12.8 kg (N-1300V-W) / 13.4 kg (N-1300V-WB) |
| Overall Dimensions | 543 × 352 × 823 mm (W×D×H) |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Sealing Material | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Shanghai, China |
| Model | N-1300V-W |
| Capacity | 3 L |
| Ultimate Vacuum | 399.9 Pa (3 mmHg) |
| Rotation Speed | 10–310 rpm |
| Bath Temperature Range | Room Temp to 90 °C |
| Temperature Control Accuracy | ±1 °C |
| Condenser Surface Area | 0.146 m² |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Supply | 220 V, 11.1 A |
| Dimensions (W×D×H) | 543 × 352 × 823 mm |
| Weight | 12.8 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-2100 |
| Bath Temperature Range | Room Temp +5 to 90°C |
| Bath Temp Control Accuracy | ±1°C |
| Rotation Speed | 5–160 rpm |
| Max Evaporation Rate | 43 mL/min (F-type), 23 mL/min (U/R-type) |
| Ultimate Vacuum | 399.9 Pa |
| Condenser Surface Area | 0.25 m² |
| Lift Stroke | 160 mm |
| Bath Dimensions & Capacity | Ø280 × 144 mm, ~8.5 L |
| Flask Capacity | 5 L (round-bottom), 3 L (receiving flask) |
| Joint Standard | S35/20 spherical ground glass |
| Weight | ~29 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-3100 |
| Rotational Speed Range | 10–140 rpm |
| Max. Evaporation Rate | 3.5 L/h (water) |
| Ultimate Vacuum | 2.6 hPa |
| Bath Temperature Range | Ambient +10°C to 180°C (±1°C in water, ±3°C in oil) |
| Heating Power | 3.5 kW |
| Temperature Control | PID |
| Vacuum Control Modes | Setpoint, Auto, Program, Pressure-Step |
| Bath Dimensions & Capacity | Φ360 × 200 mm, ~20 L |
| Bath Material | SUS304 stainless steel |
| Condenser | Vertical triple-coil, 0.5 m² cooling surface |
| Flask Capacity | 10 L spherical (neck Ø100 mm) |
| Collection Flask | 5 L spherical with drain valve |
| Sealing | PTFE mechanical seal |
| Lift Stroke | 145 mm (motorized) |
| Motor | Induction type, 60 W |
| Cooling/Inlet Port Diameter | 16 mm (×2), Solenoid Valve Port: 13 mm |
| Ambient Operating Range | 5–35°C |
| External Dimensions (W×D×H) | 930 × 480 × 1890 mm |
| Weight | ~96 kg |
| Power Supply | AC 200 V, 19 A, 3.8 kVA |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-51 |
| Capacity | 50 L (evaporation flask), 20 L (recovery flask) |
| Ultimate Vacuum | ≤2.6 hPa (≤2 Torr) |
| Rotation Speed | 10–80 rpm |
| Bath Temperature Range | +5 to 80 °C |
| Temperature Control Accuracy | ±1–2 °C |
| Condenser Type | Vertical quadruple coil |
| Cooling Surface Area | 2.0 m² |
| Bath Dimensions | Ø560 × 300 mm (H) |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | PPS-1511 / PPS-2511 / PPS-3511 |
| Reaction Vessels | 1–5 units (independently controlled) |
| Synthesis Volume | 1–4 mL (PPS-1511), 10–30 mL (PPS-2511), 50–60 mL (PPS-3511) |
| Temperature Range | −23 to 160 °C (PPS-1511), −27 to 160 °C (PPS-2511), −28 to 130 °C (PPS-3511) — each zone independently adjustable |
| Temp. Control Accuracy | ±0.5 °C |
| Stirring Speed | 100–1600 rpm (4 mL water, PPS-1511), 100–1300 rpm (30 mL water, PPS-2511), 100–1100 rpm (60 mL water, PPS-3511) |
| Stirring Input | Rotary knob with digital RPM display (20–2000 rpm) |
| Temp. Input & Display | Membrane keypad with digital display (−40.0 to 160.0 °C) |
| Gas Handling | Vacuum evacuation and inert gas purging (requires optional sealed reaction vessels) |
| Reflux Capability | Integrated high-efficiency reflux condenser |
| Reagent Addition | Syringe, pipette, or standard-taper dropping funnel — all under inert atmosphere |
| Visual Monitoring | Front-access observation slot with integrated LED illumination |
| Safety Systems | Leakage current breaker, thermal fuse, self-diagnostic firmware (including sensor fault detection and user-configurable upper temperature limit), dual-layer protective housing, drip tray, aluminum block presence detection, motor overheat protection |
| Vessel Dimensions (mm) | Φ15×150H (flanged, PPS-1511), Φ30×200H (flanged, PPS-2511), Φ35×200H (flanged, PPS-3511) |
| Stir Bar Sizes (mm) | Φ10×5H (cross-type), Φ20×7H (cross-type), Φ25×8H (cross-type) |
| External Dimensions (W×D×H, mm) / Weight | 465×335×390 / 25 kg (PPS-1511), 465×335×440 / 27 kg (PPS-2511), 465×335×450 / 28 kg (PPS-3511) |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | PPS-1520 / PPS-2520 / PPS-3520 / PPS-6520 |
| Tube Capacity | 1–5 (up to 20 with optional configuration) |
| Reaction Volume Range | 0.5–60 mL |
| Temperature Control Range | −28 °C to +160 °C (5-zone independent control) |
| Temperature Programming | 7-step ramp/hold profiles |
| Stirring | High-torque magnetic stirring (optional independent stirrer per position) |
| Dosing Control | External programmable peristaltic pump interface (dose volume, rate, temp-triggered start/stop, gradient coupling) |
| Display & Interface | LCD touchscreen |
| Data Logging | Real-time USB-exportable CSV/Excel-compatible records (time-stamped temperature, stirring status, dosing events) |
| Safety Enclosure | Dual-layer acrylic shield with anti-condensation design |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | PPS-5511 |
| Temperature Control Range | −23 to 160 °C (independent per module) |
| Temp. Accuracy | ±0.5 °C |
| Stirring Speed | 100–2000 rpm (load-dependent) |
| Reaction Volume per Vessel | 0.5–60 mL |
| Number of Simultaneous Reaction Vessels | 1–5 (expandable to 20 with optional tube rack configuration) |
| Tube Diameter Compatibility | Φ12–Φ35 mm (14 standard sizes) |
| Gas Handling | Vacuum evacuation & inert gas (N₂/Ar) purging capability (requires compatible sealed vessels) |
| Safety Systems | Dual-layer acrylic shield, motor overheat protection, leakage/overcurrent breaker, thermal fuse, real-time sensor diagnostics, user-configurable upper/lower temperature limits |
| External Dimensions | 465 W × 335 D × 390 H mm (main unit) |
| Weight | ~23 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | PPV-3430 / PPV-3460 / PPV-3461 |
| Reaction Vessel Capacity | PPV-3430: 10–30 mL (forked test tubes, 1–4 units) |
| PPV-3460 | 50–150 mL (3-neck reaction vessels, 1–4 units) |
| PPV-3461 | 50–150 mL (4-neck reaction vessels, 1–4 units) |
| Temperature Control Range | −27 to 200 °C (low-temperature operation requires external chiller) |
| Temperature Accuracy | ±0.5 °C |
| Stirring Method | High-torque magnetic stirring |
| Rotation Speed | 50–900 rpm (tested with 30 mL water for PPV-3430 |
| Temperature Setting & Display | Membrane keypad input with digital LED display |
| Stirring Speed Setting & Display | Analog knob with digital LED display |
| Reflux Configuration | Dual-path reflux condenser with independent coolant分流 (coolant distribution manifold) |
| Reagent Addition | Compatible with syringes, dropping funnels, and calibrated pipettes under inert or vacuum conditions |
| Reaction Observation | Front-mounted aluminum observation window with integrated LED illumination |
| Safety Systems | Leakage current circuit breaker, thermal fuse, temperature controller self-diagnostic function (programmable upper-limit temperature, sensor fault detection), dual-layer protective housing, drip collection tray, motor overheat protection |
| External Dimensions & Weight | 475 W × 383 D × 290 H mm |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | PSL |
| Temperature Range | –40 °C to 0 °C / –80 °C to 0 °C / –80 °C to 20 °C |
| Temperature Stability | ±0.5 °C (PSL-1400) / ±1.0 °C (PSL-1810, PSL-2000) |
| Stirring Speed | 100–800 rpm |
| Heating Power | 250 W / 450 W / 750 W |
| Cooling Capacity | Air-Cooled Compressor System (R404A, R507A/R23 Dual-Circuit) |
| Tank Material | SUS304 Stainless Steel |
| Capacity | 2.1 L / 3.5 L / 8 L |
| Stirring Motor Output | 15 W / 25 W / 25 W |
| Safety Features | Leakage Current Protection, Overcurrent Protection, Overheating Prevention, Compressor High-Pressure Cut-off, Sensor Open-Circuit Detection, Self-Diagnostic Function (Heater Fault, Sensor Anomaly, Temp Deviation Alert), Compressor Delay Start |