Common Laboratory Equipment
Filter
Showing 3541–3570 of 4952 results
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | RX-10 |
| Application Scope | Jacketed laboratory reactors (mL to L scale) |
| Integrated PAT Compatibility | In-situ pH, FTIR, FBRM, PVM, particle size analysis |
| Control Interface | Touchscreen + iC/iControl software suite |
| Regulatory Support | 21 CFR Part 11 compliant audit trail, electronic signature, data integrity features |
| Thermal Control Integration | Compatible with external chillers, heaters, and circulators |
| Data Acquisition | Synchronized timestamped logging of temperature, stirring speed, dosing volume, pH, and PAT sensor streams |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Product Type | Pre-sterilized, Recyclable Tip Rack System |
| Material Composition | Primarily PETE (Polyethylene Terephthalate) |
| Sterilization | Gamma-irradiated, ISO 11137 compliant |
| Environmental Certification | 100% recyclable per ISO 14021 |
| Packaging Efficiency | 50% less plastic vs. conventional tip racks |
| Compressibility | High — post-use volume reduction >60% in waste stream |
| Regulatory Compliance | Meets EU Directive 2002/96/EC (WEEE) and EN 13432 for recoverability |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HC-2000 |
| Instrument Type | High-Pressure Homogenizer |
| Max Operating Pressure | 2,000 psi |
| Max Flow Rate | 2,000 mL/min |
| Feed Temperature Range | up to 75 °C (165 °F) |
| Compressed Air Requirement | 24 SCFM at 50 psi, dew point −17.7 °C to 1.6 °C |
| Minimum Sample Volume | 100 mL |
| Dimensions | 44 × 44 × 51 cm |
| Weight | 16.8 kg |
| Construction Material | Electropolished 316 Stainless Steel |
| Drive Mechanism | Pneumatic |
| Clean-in-Place (CIP) | Yes |
| Sterilization Compatibility | Autoclavable & SIP-capable |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HC-5000 |
| Instrument Type | High-Pressure Homogenizer |
| Max Operating Pressure | 5,000 psi |
| Max Flow Rate | 950 mL/min |
| Feed Temperature Range | –15–165 °F (–26–74 °C) |
| Compressed Air Requirement | 28 SCFM at 50 psi, Dew Point: –17.7–1.6 °C |
| Minimum Sample Volume | 100 mL |
| Dimensions | 44 × 44 × 51 cm |
| Weight | 16.8 kg |
| Construction Material | Electropolished 316 Stainless Steel |
| Cleaning | In-line CIP-capable |
| Certification | Validated for Steam Sterilization (SIP) and Autoclave Compatibility |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M-110EH30 |
| Instrument Type | High-Pressure Homogenizer |
| Max Operating Pressure | 30,000 psi (2070 bar) |
| Max Flow Rate | 450 mL/min |
| Max Feed Temperature | 75 °C |
| Motor Power | 5 HP (3.7 kW) |
| System Fluid Volume | 100 mL |
| Compressed Air Requirement | 50 psi, 1 SCFM, dew point 0–35 °F |
| Minimum Sample Volume | 120 mL |
| Dimensions | 84 × 87 × 148 cm |
| Weight | 205 kg |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M-110P |
| Instrument Type | High-Pressure Homogenizer |
| Drive System | Hydraulic |
| Max Pressure | 30,000 psi |
| Flow Rate | 110–150 mL/min |
| Minimum Sample Volume | 25 mL |
| Interaction Chamber Material | Diamond (U.S. Patented) |
| Piston Material | Zirconia |
| Temperature Control | Integrated Inline Cooling System |
| Power Supply | 220 V AC |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 50 × 245 mm |
| Processing Volume | 0.1–500 mL |
| Speed Range | 3,000–30,000 rpm |
| Input Power | 145 W |
| Output Power | 95 W |
| Weight | 900 g |
| Protection Rating | IP20 / Class II |
| Speed Control | Electronic, Stepless, and Stability-Regulated |
| Brand | MicCRA |
|---|---|
| Origin | Germany |
| Model | D-27 |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (H×W×D) | 120 × 275 × 220 mm |
| Processing Volume Range | 0.1 mL to 50 L |
| Motor | 3-Phase Asynchronous, 2.7 kW |
| Max Speed | 36,000 rpm |
| Noise Level | 63 dB(A) |
| IP Rating | IP54 (Motor Unit), IP20 (HFU-27 Inverter) |
| Cooling | Integrated Circulating Water Cooling |
| Sealing | Pneumatic Air-Seal System with Lifetime Grease Lubrication |
| Drive Duty Cycle | S1 (Continuous Operation) |
| Inverter Output | 3×0–220 V AC, 3.8 kVA, 50–400 Hz (up to 600 Hz) |
| USB Interface | Yes |
| Weight | 9.5 kg (Motor Unit), 4.9 kg (HFU-27 Inverter) |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | D-9 |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 92 × 183 × 177 mm |
| Processing Volume | 0.1–20,000 mL (H₂O) |
| Speed Range | 3,000–25,000 rpm |
| Motor | Brushless DC (BLDC) |
| Input/Output Power | 950 W / 760 W |
| Speed Display | LED TFT |
| Speed Control | PID-regulated |
| Speed Accuracy | ±100 rpm |
| Housing Material | Anodized Hard-Aluminum Alloy |
| Noise Level | ≤55 dB(A) |
| Protection Rating | IP20 |
| Overload & Thermal Protection | Yes |
| Soft Start/Stop | Yes |
| Continuous Duty Cycle | 100% |
| Power Supply | 230 V, 50/60 Hz |
| Operating Ambient Temperature | 5–45 °C |
| Relative Humidity Limit | ≤85% RH |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | DFK |
| Type | Inline Circulation Homogenization Chamber |
| Compatible Hosts | MICCRA D-9, D-15, D-27 |
| Rotor/ Stator Configurations | DFK 1.0 (20/30 mm), DFK 1.4 (20/30/40 mm) |
| Max Flow Rate (Water) | 10–45 mL/min |
| Max Shear Velocity | 30–46 m/s |
| Max Operating Pressure | 8–16 bar |
| Vacuum Capability | ≤1 mbar |
| Seal Options | FDA-compliant lip seal or mechanical seal |
| CIP/SIP Ready | Yes |
| Material | Electropolished AISI 316L stainless steel |
| Hardness (Rotor/Stator) | ≤6 Mohs |
| Surface Finish | Ra ≤0.4 µm |
| Brand | MicCRA |
|---|---|
| Origin | Germany |
| Model | DS Series (Stator Diameter: 5–14 mm) |
| Probe Types | DS-5 / PEDS-8 / PDS-14 |
| Stator Outer Diameter | 5 mm / 8 mm / 14 mm |
| Rotor Outer Diameter | 3.6 mm / 5.6 mm / 10.6 mm |
| Max Tip Speed | 7.3 m/s / 11.4 m/s / 21.6 m/s |
| Probe Length | 115 mm / 155 mm / 200 mm |
| Minimum Immersion Depth | 30 mm (DS-5), 80 mm (PEDS-8), 125 mm (PDS-14) |
| Recommended Sample Volume (Water) | 0.1–20 mL / 1–100 mL / 10–500 mL |
| Rotor Type | Shearing Rotor |
| Stator Type | Toothed (Peg-Type) Stator |
| Application Domain | Microscale Biological Homogenization |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | D-4 / D-4P / D-4P Mul |
| Type | Probe-type Rotational Homogenizer |
| Dimensions (W×D×H) | 80 × 175 × 230 mm |
| Weight | 3 kg |
| Max. Sample Volume (H₂O) | 2 L (D-4), 5 L (D-4P & D-4P Mul) |
| Max. Viscosity | 8,000 mPa·s |
| Motor | Brushless DC |
| Input/Output Power | 450 / 360 W |
| Speed Range | 3,000–25,000 rpm (D-4), 1,500–15,000 rpm (D-4P/D-4P Mul) |
| Speed Setting Resolution | ±100 rpm |
| Timing Range | 0–999 h 59 min 59 sec |
| Programmable Steps | 6-segment (speed + time per step) |
| Temperature Monitoring | Yes (external probe optional), ±0.5 °C accuracy |
| Screen | 3.5″ TFT capacitive touchscreen |
| IP Rating | IP42 |
| Power Supply | 230 V AC, 50/60 Hz |
| Continuous Duty Cycle | 100% |
| Safety Features | Overload & thermal protection, soft start/stop, screen lock, max. temperature cutoff |
| Connectivity | Integrated Wi-Fi for remote monitoring and control via mobile device |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | DS-40 (Stator Outer Diameter: 40 mm) |
| Rotor Outer Diameter | 31 mm |
| Maximum Tip Speed | 54.5 m/s |
| Total Length | 250 mm |
| Minimum Immersion Depth | 200 mm (standard) / 40 mm (with extension sleeve) |
| Recommended Volume Range (Water) | 1,000–20,000 mL |
| Rotor-Stator Configuration | Dual-stage shear-mixing design with interchangeable coarse/fine stators |
| Compatibility | PGDS-40, PFDS-40, PFSMIRSMIREMR variants |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | DS-20 (Stator Outer Diameter: 20 mm) |
| Rotor Outer Diameter | 15 mm |
| Maximum Tip Speed | 30.6 m/s |
| Probe Length | 250 mm |
| Minimum Immersion Depth | 200 mm / 40 mm (depending on configuration) |
| Recommended Sample Volume (Water) | 20–5,000 mL |
| Rotor-Stator Configuration | Shear-Mixing, Emulsification, or Multi-Function |
| Stator Types | Coarse, Fine, Fine-Pin, and Micro-Structured |
| Rotor Types | Shear-Mixing, Emulsification, or Dual-Function |
| Compatibility | Paste, Fibrous, and Liquid Matrices |
| Modular Quick-Change System | Yes |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | DS-30 (Stator Outer Diameter: 30 mm) |
| Rotor Outer Diameter | 23 mm |
| Maximum Tip Speed | 47 m/s |
| Standard Head Length | 250 mm |
| Minimum Immersion Depth | 200 mm (standard) / 40 mm (with extension sleeve) |
| Recommended Processing Volume (Water) | 500–10,000 mL |
| Material | Electropolished ASTM F138-certified AISI 316L Stainless Steel |
| Compatible Shaft Extensions | XL (327 mm), XLL (420 mm) |
| Rotor-Stator Configurations | Multi-purpose (PFDS-30), Emulsifying (PGDS-30), Fine-cutting Fibrous (PFDS-30/ZK), Microfine (SMIR/SMIRE/MIRE/MIR) |
| Brand | MicCRA |
|---|---|
| Origin | Germany |
| Model | DS-20/2P SMIR & DS-30/2P SMIR |
| Probe Type | Multi-Application Rotor-Stator Homogenizer Head |
| Stator Configuration | One Fine + One Coarse Stator per Kit |
| Rotor Type | Shear-Mixing Rotor |
| Stator Outer Diameter | 20 mm / 30 mm |
| Rotor Outer Diameter | 15 mm / 23 mm |
| Max Tip Speed | 30.6 m/s / 47 m/s |
| Probe Length | 250 mm |
| Minimum Immersion Depth | 200 mm (operational) / 40 mm (shaft-only clearance) |
| Recommended Sample Volume (Water) | DS-20/2P — 100–3,000 mL (coarse), 250–8,000 mL (fine) |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | RW-30/P, RW-40/P, RW-70/3S |
| Stator Outer Diameter | 30 mm / 40 mm / 70 mm |
| Rotor Outer Diameter | 15 mm / 23 mm / 33 mm |
| Max Tip Speed | 30.6 m/s / 41 m/s / 58 m/s |
| Rotor Length | 250 mm / 250 mm / 420 mm |
| Minimum Immersion Depth | 200 mm (±40 mm) / 200 mm (±40 mm) / 300 mm (±100 mm) |
| Processing Volume (Water) | 1–20 L / 5–50 L / 10–100 L |
| Rotor Type | Shear-Mixing / Shear-Mixing / Turbine-Propeller |
| Stator Type | Coarse Mesh / Coarse Mesh / Fine Mesh |
| Brand | Michem |
|---|---|
| Model | MW-D10 |
| Origin | Beijing, China |
| Product Category | Domestic |
| Purified Water Grade | Type I (ASTM D1193-20) |
| Resistivity | 10–18.25 MΩ·cm |
| Total Organic Carbon (TOC) | ≤10 ppb |
| Particles (>0.1 µm) | ≤1 particle/mL |
| Power Supply | Standard AC outlet |
| Feed Water Requirement | Municipal tap water, conductivity ≤550 µS/cm |
| Filtration Stages | 6-stage integrated purification |
| UV Wavelength | 185/254 nm dual-lamp system |
| Output Options | Dual independent streams — purified water & ultra-pure water |
| Compliance | ASTM D1193, CLSI (formerly NCCLS) Grade I, CAP Laboratory Standards, NSF/ANSI 58 & 61 certified components (Dow Filmtec™ & Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane Systems/Koch Membrane...... (truncated for brevity |
| Brand | MICHEM |
|---|---|
| Model | RC-15 / RC-24 / RC-40 / RC-54 |
| Heating Material | High-Purity Graphite with Multi-Layer PTFE Coating |
| Max. Temperature | 460 °C |
| Temperature Accuracy | ±1.0 °C |
| Heating Uniformity | ±2.0 °C across block |
| Control System | PID Digital Controller with 30-Step Programmable Ramp/Soak |
| Sample Capacity | 15 × 100 mL, 24 × 50 mL, 40 × 100 mL, or 54 × 50 mL |
| Power Rating | 1200 W (RC-15/RC-24) / 3000 W (RC-40/RC-54) |
| Input Voltage | AC 220 V, 50 Hz, 16 A |
| Dimensions (W×H×D) | 470×350×270 mm (RC-15/RC-24) / 670×460×270 mm (RC-40/RC-54) |
| Compliance | Designed for GLP-compliant sample preparation workflows |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | Micro-Tac |
| Sample Processing | Wastewater Treatment |
| Core Technology | Integrated Fenton-based Advanced Oxidation Process (AOP) with Microwave Acceleration and Rare-Earth Metal Catalyst |
| Brand | Microblox |
|---|---|
| Origin | France |
| Model | MSTC |
| Core Components | Fluigent Flow EZ Pressure Pump, Flow Unit Mass Flow Sensor, Metal-Based Thermal Control Stage |
| Temperature Range | Customizable (Typically −40 °C to +120 °C) |
| Microscope Compatibility | Standard Inverted & Upright Microscopes (via Open-Top Chip Mounting Interface) |
| Structural Frame | Steel-Aluminum Hybrid Laboratory Workbench (Single-Sided Configuration) |
| Compliance | CE Marked, RoHS Compliant, Designed for ISO/IEC 17025-Compatible Lab Environments |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M-110S |
| Instrument Type | High-Pressure Homogenizer |
| Operating Pressure Range | 3,000–23,000 psi (20.7–158.6 MPa) |
| Flow Rate | 200–600 mL/min |
| Max Feed Temperature | 75 °C |
| Minimum Sample Volume | 14 mL |
| Compressed Air Requirement | 120 psi @ 50 scfm, dew point 0–35 °F, 15 hp (11 kW) |
| Dimensions | 58 × 53 × 58 cm |
| Weight | 25 kg |
| Interaction Chamber | Fixed-geometry microchannel stainless steel |
| Cooling | Integrated portable chiller system |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M-610 |
| Instrument Type | High-Pressure Homogenizer |
| Max Operating Pressure | 18,000 psi |
| Flow Rate Range | 124–270 mL/min |
| Feed Temperature Range | –25°C to 75°C |
| Minimum Sample Volume | 14 mL |
| Compressed Air Requirement | 28–57 SCFM at 80 psi (7.5–15 hp) |
| Dimensions | 60 × 39 × 68 cm |
| Weight | 26.4 kg |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Models | VB15, VB24PLUS, VB24UP, VB48UP, VB51 |
| Pricing | Available Upon Request |
| Brand | Binzhenghong |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Milestone 12- and 41-Position Configurations |
| Cavity Class | Industrial-Grade |
| Sample Capacity | 40 samples per run |
| Microwave Source | Single Magnetron |
| Max Temperature | 230 °C |
| Max Pressure | 1500 psi |
| Brand | MILESTONE |
|---|---|
| Origin | Italy |
| Model | ETHOS UP |
| Cavity Class | Industrial-Grade |
| Sample Capacity | 1–44 vessels |
| Microwave Source | Dual Magnetron |
| Max Temperature | 320 °C |
| Max Pressure | 2200 psi |
| Microwave Leakage | 0.05 mW/cm² |
| Vessel Volume | up to 100 mL |
| Safety Certification | Integrated cast-metal cavity, self-sealing stainless-steel door, full-vessel real-time temperature & pressure monitoring |
| Brand | MILESTONE |
|---|---|
| Origin | Italy |
| Model | ETHOS X |
| Type | Microwave-Assisted Extraction (MAE) System |
| Sample Capacity | Up to 44 sealed vessels per run |
| Cycle Time | ≤40 min for full batch |
| Vessel Type | Disposable borosilicate glass extraction vessels |
| Temperature Control | Full-vessel infrared temperature monitoring |
| Safety Compliance | <0.05 mW/cm² microwave leakage (IEC 61000-3-2, IEC 62233), integrated stainless steel monolithic cavity, active pressure-relief “sliding wall” safety door |
| Solvent Compatibility | Polar (e.g., methanol, acetone), non-polar (e.g., hexane, DCM), and mixed solvents |
| Stirring | Integrated automatic magnetic stirring per vessel |
| Software | Preloaded method library, touchscreen GUI, audit-trail-capable operation log |
| Brand | Binzhenghong (Nanjing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | ZH-44 |
| Pricing | Available Upon Request |
| Vessel Configuration | TFM Body + PFA Cap + Internal TFM Insert |
| Compatibility | Fully Interchangeable with Original Milestone UltraWAVE and ETHOS UP Systems |
| Brand | MILESTONE |
|---|---|
| Origin | Italy |
| Model | PYRO SA |
| Instrument Type | Crucible Furnace |
| Max Temperature | 1200 °C |
| Temperature Control | PID-based dual-stage thermocouple system with DKD-traceable calibration |
| Max Power | 1200 W |
| Time to Max Temperature | ≤20 min |
| Heating Elements | Resistance wire, SiC rods, MoSi₂ rods |
| Internal Chamber Dimensions | 480 mm (W) × 550 mm (D) × 560 mm (H) |
| Acid Management System | Quartz-lined chamber, quartz condenser, PTFE/PFA acid traps, NaOH neutralization stage, corrosion-resistant PTFE vacuum pump (20 mbar, 40 L/min) |
| Airflow Design | Perforated honeycomb alumina ceramic wall for continuous oxidative airflow over crucibles |
| Brand | MILESTONE |
|---|---|
| Origin | Italy |
| Model | ultraWAVE 3 |
| Cavity Class | Industrial-grade |
| Sample Capacity | 1–22 samples per batch |
| Microwave Source | Single Magnetron |
| Max Temperature | 320 °C |
| Max Pressure | 3000 psi (207 bar) |
| Reaction Chamber Volume | 4.2 L |
| Sample Mass Capacity | ≥25 g per vessel |
| Acid Consumption | 2–3 mL per sample |
| Vessel Compatibility | Standard quartz, borosilicate glass, or TFM-lined tubes |