Common Laboratory Equipment
Filter
Showing 3601–3630 of 4952 results
| Brand | MyPu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Model | MYP20 |
| Instrument Type | Electric Magnetic Stirrer |
| Max. Stirring Volume | 100 L (H₂O) |
| Speed Range | 60–1400 rpm |
| Temp. Control Range | 50–300 °C |
| Heating Power | 4.3 kW |
| Stirring Power | 150 W |
| Heating Plate Diameter | 500 mm |
| Working Surface Height | 375 mm |
| Max. Weighing Capacity | 250 kg |
| Weighing Resolution | 0.01 kg |
| Weighing Accuracy | ±0.2 kg |
| Stirring Timer | 1–9999 min |
| Overtemperature Protection | 350 °C |
| Dimensions (W×D×H) | 620 × 500 × 890 mm |
| Input Voltage | AC 220 V ±10% |
| Grounding Requirement | Yellow-Green Earth Conductor Mandatory |
| Brand | MyPu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MYP23 |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 200 L |
| Speed Range | 1–2000 rpm |
| Temperature Control Range | Not Integrated (External Heating Required) |
| Rated Voltage | AC 220 V |
| Rated Frequency | 50/60 Hz |
| Motor Power | 1500 W |
| Motor Type | Brushless DC Servo Motor |
| Duty Cycle | S1 (Continuous Operation) |
| Vertical Column Travel | 50 cm |
| Chuck Type | Quick-Release Clamp |
| Clamp Jaw Range | Φ3–16 mm |
| Timer Range | 1–9999 min |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | N4R-1.0-50 |
| Price Range | USD 4,200–7,000 (FOB) |
| Water Flow Rate | 100–1000 L/h |
| Controllable Resistivity Range | 0.15–1.7 MΩ·cm |
| Control Accuracy | ±0.03 MΩ·cm |
| Max. Inlet Water Pressure | 0.5 MPa |
| Pressure Drop | 0.06 MPa at 3000 L/h |
| Connection Ports | 3/4″ female screw |
| Power Supply | AC 100–130 V / 220–240 V, 50/60 Hz, single-phase, 1 A |
| Enclosure Type | Rack or Cabinet |
| H₂O₂-Compatible Sterilization | Yes (3% hydrogen peroxide) |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Part Number | 631000166 |
| Category | Muffle Furnace Accessory |
| Application | Catalytic Exhaust Afterburning |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Product Type | Imported Accessory |
| Compatible Models | L, LT, LE, LV, LVT Series |
| Part Numbers | 691601099 (LE 2), 691600510 (L3/LT3/LV3/LVT3), 691600511 (LE4/LE6/L5/LT5/LV5/LVT5), 691600512 (L9/LT9/LV9/LVT9) |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | R Series |
| Max Operating Temperature | 1200 °C or 1300 °C |
| Tube ID | 50–120 mm |
| Heating Zone Length | 250–1000 mm |
| External Dimensions (W×D×H) | up to 1300 mm × 1170 mm × 460 mm |
| Power Supply | 1-phase (1.6–2.3 kW) or 3-phase (6.5–11.5 kW) |
| Weight | 22–89 kg |
| Control System | HiProSystem (3-zone for models ≥750 mm heating length, 1300 °C), integrated S-type thermocouple, overtemperature protection per EN 60519-2 Class 2 |
| Atmosphere Options | inert gas, vacuum-compatible configurations available |
| Software Integration | Controltherm MV for process monitoring, logging, and compliance-ready data management |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Product Type | Replacement Hearth & Collection Tray Set |
| Compatible Models | L, LT, LE, LV, LVT Series Muffle Furnaces |
| Part Numbers | 691601097, 691600507, 691600508, 691600509, 691601098, 691600506, 691600874, 691600875 |
| Material | High-Purity Alumina-Based Ceramic (Al₂O₃ ≥ 92%) |
| Thermal Stability | Up to 1300 °C Continuous |
| Surface Texture | Precision-Engineered Corrugated Profile |
| Thickness | 12 mm ±0.3 mm |
| Dimensional Tolerance | ±0.5 mm per 100 mm |
| Compliance | ISO 9001 Certified Manufacturing |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Part Number | 631000141 |
| Compatibility | Designed for Nabertherm muffle furnaces with P330 controller interface |
| Function | Active exhaust ventilation system for controlled off-gas removal |
| Construction | High-temperature resistant stainless steel housing with IP54-rated fan assembly |
| Operating Temperature Range | Up to 1200 °C (chimney body) |
| Electrical Supply | 230 V AC, 50/60 Hz, 0.18 A |
| Fan Speed Control | Analog 0–10 V signal from P330 controller |
| Airflow Capacity | 120 m³/h at 150 Pa static pressure |
| Noise Level | ≤58 dB(A) at 1 m distance |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Part Number | 491041101 |
| Max Operating Temperature | 900 °C |
| Material | High-performance aluminosilicate fiber composite with reinforced stitching and ergonomic leather palm overlay |
| Compliance | EN 407:2020 (Type A1, A2, A3, A4, A5, B1, C1, E1, F1) |
| Intended Use | Manual handling of hot crucibles, trays, and furnace inserts in laboratory and industrial muffle furnace environments |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Part Number | 493000004 |
| Max Operating Temperature | 650 °C |
| Compliance | EN 407:2020 (Type A1, A2, A3, A4, A5, B1, C1, E1, F1) |
| Material | Aluminized Fiberglass with Insulating Liner |
| Length | 350 mm |
| Certification | CE Marked, EU Declaration of Conformity Available |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model Range | HFL16/16 – HFL160/17 |
| Max Temperature | 1600 °C or 1700 °C |
| Chamber Volume | 16–160 L |
| Heating Element | Molybdenum Disilicide (MoSi₂) |
| Insulation | Lightweight Refractory Brick with Rear Thermal Barrier |
| Thermocouple Type | Type B |
| Overtemperature Protection | Integrated Limit Controller |
| Exhaust Port | 30 mm Ø at Top Lid |
| Power Supply | 3-phase, 12–21 kW |
| Weight | 500–1190 kg |
| Compliance | CE, EN 61000-6-3, EN 61000-6-4, IEC 61000-4-2 |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | HT 04/16 – HT 16/18 |
| Furnace Type | Vertical Muffle Furnace |
| Max Temperature | 1600°C – 1800°C |
| Temperature Uniformity | ±1°C |
| Heating Element | Molybdenum Disilicide (MoSi₂) |
| Internal Dimensions | 150×150×150 mm to 260×300×200 mm |
| Chamber Volume | 4 L – 450 L |
| Max Power Input | 5.2 kW – 12.0 kW |
| Ramp Time to Max Temp | ≤60 min |
| Power Supply | 3-phase, 400 V |
| Thermal Insulation | High-purity Al₂O₃ fiber module construction |
| Safety | Dual-stage overtemperature protection (mechanical limiter + electronic controller), B-type thermocouple (PtRh30/PtRh6), chain-guided parallel door mechanism, helical locking system, reinforced hearth option, inert gas purge ports, optional forced-air cooling fan & automated venting |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | HTC03/14–HTC08/16 |
| Type | Benchtop Box Muffle Furnace |
| Max Temperature | 1400 °C / 1500 °C / 1600 °C |
| Chamber Dimensions (W×D×H) | 120×210×120 mm or 170×290×170 mm |
| Chamber Volume | 3 L or 8 L |
| External Dimensions (W×D×H) | 400×535×530 mm or 450×620×570 mm |
| Power Supply | 3-phase, 9.0 kW or 13.0 kW |
| Weight | 30–40 kg |
| Heating Time to Max Temp | ≤40–60 min (dependent on model & setpoint) |
| Heating Element | Silicon Carbide (SiC) rods |
| Construction | Double-walled stainless steel housing with fiber insulation |
| Compliance | EN 60519-2 Class 2 thermal overtemperature protection |
| Origin | Germany |
|---|---|
| Type | Box-Type Muffle Furnace |
| Max Operating Temperature | 1400 °C / 1500 °C / 1600 °C |
| Temperature Uniformity | ±1 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Internal Chamber Dimensions | 170 × 290 × 170 mm |
| Max Power Input | 13.0 kW |
| Ramp Time to Max Temperature | ≤45 min |
| Construction | Dual-Wall Stainless Steel Housing with Ceramic Fiber Insulation |
| Compliance | EN 60519-2 (Thermal Protection Class 2), CE Marked |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | HTCT01/14, HTCT08/16 |
| Max Temperature | 1400 °C / 1500 °C / 1600 °C |
| Chamber Dimensions (W×D×H) | 110×120×120 mm to 170×290×170 mm |
| Chamber Volume | 1.5 L to 8.0 L |
| External Dimensions (W×D×H) | 340×300×460 mm to 450×620×570 mm |
| Power Supply | 1-phase or 3-phase |
| Rated Power | 3.5 kW to 13.0 kW |
| Weight | 18 kg to 60 kg |
| Heating Element | Silicon Carbide (SiC) rods |
| Construction | Double-walled stainless steel housing with fiber insulation |
| Door Type | Top-opening (HTCT series) or front-opening (HTC series) |
| Compliance | EN 60519-2 (thermal protection class 2), optional overtemperature limiter |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model Range | K1/10, K2/10, K4/10, K1/132, K2/132, K4/132, KC1/153, KC2/153 |
| Max Temperature | 1000 °C, 1300 °C or 1500 °C |
| Crucible Capacity | 1 L, 2 L or 4 L |
| External Dimensions (W × D × H) | 520–580 mm × 630–755 mm × 580–705 mm |
| Power Supply | 1-phase (3–5.5 kW) or 3-phase (10.5 kW) |
| Weight | 85–170 kg |
| Crucible Type | Graphite (standard), optional steel or SiC |
| Tilt Mechanism | Pneumatic spring-assisted tilting with damper |
| Casting Trough | Integrated front-mounted (except KC series) |
| Overtemperature Protection | EN 60519-2 Class 2 thermal cut-off |
| Viewing Port | Integrated observation window |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 1/12 – LT 40/12 |
| Heating Temperature Range | 1100 °C or 1200 °C |
| Chamber Volume | 1–40 L |
| Power Supply | 1-phase (230 V) or 3-phase (400 V) |
| Heating Configuration | Dual-sided ceramic heating plates (triple-sided for L 24/11 – LT 40/12) |
| Insulation | High-purity alumina-silica safety fiber |
| Construction | Double-walled stainless steel housing (brushed finish) |
| Door Options | Front-opening (L) or top-opening (LT) |
| Safety Compliance | EN 60519-2, Thermal Protection Class 2 |
| Data Logging | NTLog via USB flash drive |
| Optional Accessories | Gas purge interface, exhaust chimney with fan/catalyst, VCD process control software |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 15/14 |
| Type | Box Muffle Furnace |
| Max Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 3.2 kW |
| Heating Time to Max Temp | 70 min |
| Heating Method | Resistance Wire Heating |
| Internal Dimensions | 230 × 240 × 170 mm |
| Nominal Volume | 15 L |
| External Construction | Double-Wall Insulated Casing |
| Thermal Insulation Material | TRGS 905 Class 1 or 2 Non-Carcinogenic Ceramic Fiber |
| Door | Adjustable Air Intake |
| Rear Wall | Exhaust Vent |
| Controller | Nabertherm NTLog (USB Data Logging) |
| Safety | EN 60519-2 Compliant Overtemperature Limiter (Thermal Protection Class 2) |
| Optional | Inert/Reactive Gas Inlet Port, Exhaust Chimney with Fan or Catalyst, Manual/Automatic Gas Supply System |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 24/11 BO |
| Instrument Type | Box-type Muffle Furnace |
| Max Temperature | 1100°C |
| Temperature Control Accuracy | ±1°C |
| Max Power | 9000 W |
| Ramp Time to Max Temp | 95 min |
| Heating Method | Resistance Wire Heating |
| Internal Dimensions | 250 × 280 × 340 mm |
| Exhaust Treatment | Thermal & Catalytic Afterburning up to 850°C |
| Air Preheating | Yes (via bottom heating plate) |
| Safety Compliance | EN 60519-2 Class 2 Overtemperature Protection |
| Insulation Material | Non-carcinogenic Ceramic Fiber (TRGS 905 Class 1/2) |
| Construction | Double-walled Stainless Steel Casing with Textured Finish |
| Door Mechanism | Spring-assisted Mechanical Lock |
| Data Logging | NTLog Basic (USB flash drive) |
| Optional Software | VCD Process Control & Documentation Suite |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 5/13 |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1300 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 2.4 kW |
| Heating Time to Max Temp | 45 min |
| Heating Method | Resistance Wire (NiCr Alloy) |
| Internal Dimensions (W×D×H) | 130 × 170 × 200 mm |
| External Dimensions (W×D×H) | 549 × 450 × 580 mm |
| Weight | 42 kg |
| Electrical Supply | Single-phase, 230 V, 50/60 Hz |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 9/11 |
| Instrument Type | Box-Type Muffle Furnace |
| Max. Temperature | 1100°C |
| Temperature Uniformity | ±3°C |
| Max. Power | 3.0 kW |
| Heating Time to 1100°C | 75 min |
| Heating Method | Dual-Side Ceramic Heating Panels |
| Internal Dimensions (W×D×H) | 230 × 240 × 170 mm |
| External Dimensions (W×D×H) | 415 × 455 × 515 mm |
| Weight | 35 kg |
| Electrical Supply | Single-phase 230 V, 50/60 Hz |
| Insulation | High-Density Ceramic Fiber |
| Door Configuration | Front-Opening (L-series) |
| Air Inlet | Adjustable on Door |
| Rear Exhaust Port | Yes |
| Overtemperature Protection | Independent Limit Controller per EN 60519-2 Class 2 |
| Optional Accessories | USB Data Logger (NTLog), VCD Process Control Software, Gas Purge Interface, Catalytic Exhaust System |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 9/11/SKM |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1100 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 3.0 kW |
| Heating Time to Max Temp | 90 min |
| Heating Method | Resistance Wire (Embedded in Ceramic Chamber) |
| Internal Dimensions | 230 × 240 × 170 mm (W × D × H) |
| Chamber Volume | 9 L |
| External Dimensions | 490 × 505 × 580 mm (W × D × H) |
| Weight | 90 kg |
| Electrical Supply | 1-phase, 230 V, 50 Hz |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 9/11/SW, L 9/12/SW, LT 9/11/SW, LT 9/12/SW |
| Type | Box-type muffle furnace with integrated thermogravimetric measurement |
| Max. temperature | 1100 °C or 1200 °C |
| Internal dimensions (W×D×H) | 230 × 240 × 170 mm |
| Chamber volume | 9 L |
| External dimensions (W×D×H) | 480 × 550 × 800 mm (L-series) or 480 × 550 × (800+290) mm (LT-series) |
| Power supply | 3.0 kW, single-phase |
| Weight | 55 kg (L), 75–90 kg (LT) |
| Heat-up time to max. temperature | 75–90 min |
| Weighing system options | EW-1500 (d = 0.01 g, max = 1500 g incl. lever), EW-3000 (d = 0.01 g, max = 3000 g), EW-6000 (d = 0.10 g, max = 6000 g) |
| Lever weight | 850 g |
| Minimum load | 0.5 g (EW-1500/EW-3000), 5.0 g (EW-6000) |
| Repeatability | ±0.01 g (EW-1500/EW-3000), ±0.10 g (EW-6000) |
| Brand | Nabertherm |
|---|---|
| Model | L3–L40 |
| Max. Temperature | 1100 °C / 1200 °C |
| Effective Chamber Volume | 3–40 L |
| Voltage | 230 V, 1/N |
| Power Rating | 1.2–6.0 kW |
| Weight | 20–95 kg |
| Construction | Dual-layer stainless steel housing |
| Insulation | Vacuum-formed ceramic fiber modules (standard) |
| Heating Elements | Embedded resistive wire in ceramic heating plates |
| Controller | Standard B170 digital PID (ramp-soak programming) |
| Air Management | Adjustable inlet on door |
| Safety | Low external surface temperature |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L, LT 9/11/SKM |
| Max. Operating Temperature | 1100 °C |
| Internal Dimensions (W×D×H) | 230 × 240 × 170 mm |
| Chamber Volume | 9 L |
| External Dimensions (W×D×H) | 490 × 505 × 580 mm |
| Electrical Connection | 1-phase, 230 V, 50 Hz |
| Power Rating | 3.4 kW |
| Net Weight | 90 kg |
| Heating Element | Embedded Ceramic-Sheathed Resistance Wire |
| Chamber Material | Corrosion-Resistant Ceramic Fiber Liner with Smooth, Non-Shedding Surface |
| Door Options | Front-Opening (L) or Top-Opening (LT) |
| Air Inlet | Adjustable on Door |
| Exhaust Port | Rear Wall-Mounted |
| Safety | Dual Overtemperature Protection per EN 60519-2 (Class 2 Thermal Protection), Cut-off Setpoint Configurable |
| Optional Accessories | Catalytic Exhaust System, Forced-Air Exhaust Fan, Gas Inlet Fitting for Inert/Reducing Atmospheres |
| Origin | Germany |
|---|---|
| Type | Box-type Muffle Furnace |
| Max. Temperature | 1200 °C |
| Temperature Uniformity | ±1 °C |
| Heating Method | Embedded Resistance Wire in Ceramic Heating Panels |
| Internal Volume | 1–40 L |
| Power Rating | 1.2–6 kW |
| Ramp Time to Max Temp | ≤30 min |
| Construction | Double-walled Stainless Steel (V2A) Housing with Vacuum-Insulated Fiber Modules |
| Door Options | Flip-up or Lift-up Configuration |
| Safety Compliance | EN 60519-2, Thermal Protection Class 2 |
| Software Control | Compatible with Controltherm MV Process Management Suite |
| Origin | Germany |
|---|---|
| Type | Box-Type Muffle Furnace |
| Max. Temperature | 1100 °C or 1200 °C |
| Temperature Accuracy | ±1 °C |
| Max. Power | 6 kW |
| Heating Rate to Max. Temperature | ≤40 min |
| Heating Method | Dual-Side Ceramic Heating Plates (Triple-Side for L24/11–LT40/12 models) |
| Internal Volume | 1–40 L |
| Compliance | EN 60519-2, IEC 61000-6-3, CE Marked |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L15/11/B410 |
| Type | Box-Type Muffle Furnace |
| Max. Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Rated Power | 3.5 kW |
| Heating Time to Max. Temp. | 90 min |
| Internal Dimensions (W×D×H) | 230 × 340 × 170 mm |
| Chamber Volume | 9 L |
| Heating Method | Electric (Dual-Sided Ceramic Heating Panels with Embedded Resistance Wire) |
| Construction | Double-Walled Stainless Steel Housing (Brushed Finish), Ceramic Fiber Insulation, Safety-Grade Refractory Liner |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L15/11/C450 |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Max Power | 3.5 kW |
| Heating Time to Max Temp | 90 min |
| Heating Method | Electric (Dual-Sided Ceramic Heating Panels) |
| Internal Dimensions (W×D×H) | 230 × 340 × 170 mm |
| Chamber Volume | 9 L |
| External Dimensions (W×D×H) | 415 × 555 × 515 mm |
| Weight | 40 kg |
| Phase | Single-Phase |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L3 11 B410 |
| Type | Box-Type Muffle Furnace |
| Max. Operating Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Rated Power | 1.2 kW |
| Heating Time to 1100 °C | 60 min |
| Internal Dimensions (W×D×H) | 160 × 140 × 100 mm |
| Chamber Volume | 3 L |
| External Dimensions (W×D×H) | 385 × 330 × 405 mm |
| Weight | 20 kg |
| Heating Method | Electric (Dual-Sided Ceramic Heating Panels with Embedded Resistance Wires) |
| Insulation | High-Density Ceramic Fiber |
| Housing | Double-Walled Stainless Steel (Brushed Finish) |
| Controller | B410 Programmable 4-Stage Digital Controller with USB Data Logging (NTLog Basic Software) |