Common Laboratory Equipment
Filter
Showing 5191–5220 of 5269 results
| Brand | Zhonghui Pu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SPH-300A / SPH-500A |
| Hydrogen Generation Principle | Aqueous Alkaline Electrolysis |
| Output Flow Rate | 0–300 mL/min (SPH-300A) / 0–500 mL/min (SPH-500A) |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Pressure Stability | < 0.001 MPa |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 150 W (SPH-300A) / 250 W (SPH-500A) |
| Dimensions (W×D×H) | 360 × 200 × 260 mm |
| Net Weight | ~9 kg |
| Gas Filtration | Stainless Steel Filter + Low-Sulfur Silicone Seals |
| Brand | Zhonghui Pu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SPH-300AT |
| Pricing | Upon Request |
| Hydrogen Generation Principle | Aqueous Alkaline Electrolysis |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 150 W |
| Brand | Zhonghui Pu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SPH-300MT |
| Hydrogen Generation Principle | Aqueous Alkaline Electrolysis |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 150 W |
| Pressure Stability | < 0.001 MPa |
| Input Power | 220 V ±10%, 50 Hz |
| Dimensions (W×D×H) | 360 × 200 × 260 mm |
| Net Weight | ~9 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-10 |
| Output Flow Rate | 0–10 L/min at 0.4 MPa |
| Output Pressure Range | 0–0.5 MPa (factory-set to 0.4 MPa) |
| Pressure Stability | < ±0.003 MPa |
| Power Consumption | 550 W |
| Dimensions (W×D×H) | 380 × 570 × 440 mm |
| Net Weight | ~35 kg |
| Air Tank Capacity | 8 L |
| Tank Material | 1.5 mm thick 304 stainless steel |
| Cooling & Drying | Dual-fan coil heat exchanger with condensate removal |
| Drainage System | Two-stage automatic condensate discharge |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-10PSA |
| Output Flow | 0–10 L/min at 0.4 MPa |
| Output Pressure | 0–0.4 MPa |
| Dew Point | < −10 °C |
| Pressure Stability | < ±0.003 MPa |
| Power Consumption | 550 W |
| Input Voltage | 220 V ±10% |
| Dimensions (L×W×H) | 400 × 425 × 650 mm |
| Net Weight | ~45 kg |
| Operating Environment | 5–40 °C, RH ≤85% |
| Filtration | Dual-stage particulate + PSA desiccant drying |
| Compressor | Thomas (USA) oil-free rocking piston type |
| Pneumatic Components | SMC (Japan), Airtac (Taiwan) |
| Tank & Filter Housing | 304 stainless steel & aluminum alloy |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | A-20 |
| Price | Upon Request |
| Output Flow Rate | 0–35 L/min at 0.4 MPa |
| Output Pressure | 0–0.5 MPa (factory-set to 0.4 MPa) |
| Pressure Stability | < ±0.003 MPa |
| Power Consumption | 750 W |
| Dimensions (W×D×H) | 380 × 570 × 440 mm |
| Net Weight | ~35 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-30PSA |
| Output Flow Rate | 0–35 L/min |
| Output Pressure | 0–0.5 MPa |
| Dew Point | ≤ −40 °C |
| Particle Size Filtration | < 0.01 µm |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 2500 W |
| Dimensions (L×W×H) | 90 × 60 × 75 cm |
| Weight | ~110 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-30PSAD |
| Output Flow | 0–22 L/min at 0.7 MPa (for nitrogen generator supply) |
| Output Pressure | 0–0.7 MPa (factory-set at 0.4 MPa) |
| Pressure Stability | < 0.003 MPa |
| Dew Point | ≤ −22 °C |
| Operating Environment | 5–40 °C, RH ≤ 85% |
| Power Consumption | 1200 W |
| Input Voltage | 220 V ±10% |
| Construction | 304 Stainless Steel Tanks & Filtration Components |
| Air Purity Class | ISO 8573-1 Class 2:2:2 (solid particles, water, oil) |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | APH-500 |
| Hydrogen Generation Principle | Alkaline Electrolysis |
| Output Flow Rate | 0–500 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 250 W |
| Dimensions (L×W×H) | 340 × 200 × 385 mm |
| Net Weight | 15 kg |
| Operating Temperature | 1–40 °C |
| Relative Humidity | <85% |
| Power Supply | 220 V ±10%, 50 Hz |
| Pressure Stability | <0.001 MPa |
| Integrated External Water Reservoir Capacity | 15 L |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | ATH-3000 |
| Pricing | Upon Request |
| Hydrogen Generation Principle | Pure Water Electrolysis |
| Output Flow Rate | 0–3000 mL/min |
| Output Pressure | 0–0.7 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 1500 W |
| Oxygen Content in H₂ Output | ≤3 ppm |
| Dew Point of H₂ Output | ≤−55 °C |
| Input Power Supply | 220 V ±10%, 50 Hz |
| Operating Ambient Temperature | 1–40 °C |
| Relative Humidity | <85% RH |
| Dimensions (W×D×H) | 400 × 600 × 600 mm |
| Net Weight | ~50 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ATH-500 |
| Hydrogen Generation Principle | Pure-Water Electrolysis |
| Output Flow Rate | 0–500 mL/min |
| Output Pressure | 0–100 psi (≈0.7 MPa) |
| Hydrogen Purity | 99.9995% |
| Power Consumption | 300 W |
| Pressure Stability | <0.001 MPa |
| Input Voltage | 220 V ±10%, 50 Hz |
| Operating Temperature | 1–40 °C |
| Relative Humidity | <85% RH |
| Dimensions (L×W×H) | 570 × 185 × 400 mm |
| Net Weight | ~18 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | DH-300 |
| Hydrogen Generation Principle | Alkaline Electrolysis |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.5 MPa |
| Hydrogen Purity | 99.99999% |
| Power Consumption | 300 W |
| Dimensions (W×D×H) | 420 × 200 × 350 mm |
| Net Weight | 15 kg |
| Pressure Stability | < 0.0001 MPa |
| Input Power | 220 V ±10%, 50 Hz |
| Sealing Material | Low-Sulfur Silicone O-Rings |
| Purification Method | Palladium Alloy Membrane Filtration |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GCD-1000 |
| Hydrogen Generation Principle | Alkaline Electrolysis |
| Output Flow Rate | 0–1000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 400 W |
| Pressure Stability | < 0.001 MPa |
| Input Power | 220 V ±10%, 50 Hz |
| Operating Temperature | 1–40 °C |
| Relative Humidity | < 85% RH |
| Dimensions (W×D×H) | 460 × 370 × 360 mm |
| Net Weight | ~20 kg |
| Filtration | Dual stainless-steel filters with trace oxygen scavenger (pre-activated) |
| Sealing Material | Low-sulfur silicone rubber gaskets |
| Safety Features | Automatic anti-alkali-backflow protection, real-time pressure/flow monitoring |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GCD-2000 |
| Hydrogen Generation Principle | Aqueous Alkaline Electrolysis |
| Output Flow Rate | 0–2000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 1 kW |
| Pressure Stability | < 0.001 MPa |
| Input Voltage | 220 V ±10%, 50 Hz |
| Operating Temperature | 1–40 °C |
| Relative Humidity | < 85% RH |
| Dimensions (W×D×H) | 460 × 320 × 500 mm |
| Net Weight | ~30 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GCD-3000B |
| Hydrogen Generation Principle | Alkaline Electrolysis |
| Output Flow Rate | 0–3000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 1300 W |
| Dimensions (D×W×H) | 600 × 450 × 950 mm |
| Net Weight | 67 kg |
| Operating Temperature | 1–40 °C |
| Relative Humidity | < 85 % RH |
| Input Power | 220 V ±10 %, 50 Hz |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | GCD-3000PSA |
| Hydrogen Generation Principle | Alkaline Electrolysis |
| Output Flow Rate | 0–3000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 1500 W |
| Dimensions (W×D×H) | 600 × 450 × 950 mm |
| Net Weight | 73 kg |
| Operating Temperature | 1–40 °C |
| Relative Humidity | ≤85% RH |
| Pressure Stability | <0.001 MPa |
| Input Voltage | 220 V ±10% |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GCK3302 / GCK3308 |
| Output Flow Rate | 0–5000 mL/min (up to 8000 mL/min at 0.4 MPa) |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Operating Environment | 0–45 °C, RH ≤ 85% (non-dusty, non-corrosive atmosphere) |
| Power Consumption | 250 W |
| Input Voltage | 220 V ± 10% |
| Dimensions (W×D×H) | 480 × 260 × 350 mm |
| Net Weight | ~25 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | GCN-1000 |
| Instrument Type | Nitrogen Generator |
| Output Flow Rate | 0–1000 mL/min |
| Output Pressure | 0–0.4 MPa (air-source dependent) |
| Nitrogen Purity | <3 ppm O₂, dew point ≤ −56 °C |
| Nitrogen Dew Point | ≤ −56 °C |
| Pressure Stability | <0.003 MPa (subject to inlet air stability) |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 150 W |
| Operating Environment | 1–40 °C, RH <85% |
| Dimensions (W×D×H) | 460 × 360 × 350 mm |
| Net Weight | ~20 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HA-300 / HA-500 |
| H₂ Purity | 99.999% |
| H₂ Flow Range | 0–300 mL/min (HA-300) / 0–500 mL/min (HA-500) |
| H₂ Output Pressure | 0.4 MPa |
| Air Flow Range | 0–2000 mL/min |
| Air Output Pressure | 0.4 MPa |
| Power Consumption | 300 W (HA-300) / 400 W (HA-500) |
| Dimensions (W×D×H) | 470 × 260 × 380 mm |
| Net Weight | ~28 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HA-3380 |
| Quotation | Available Upon Request |
| Hydrogen Flow Rate | 0–300 mL/min (optional 500 mL/min) |
| Hydrogen Purity | 99.999% |
| Hydrogen Output Pressure | 0.4 MPa (4 kgf/cm²) |
| Hydrogen Pressure Stability | < 0.001 MPa |
| Air Flow Rate | 0–2 L/min (optional 5 L/min) |
| Air Output Pressure | 0–0.4 MPa |
| Operating Environment | 5–40 °C, ≤85% RH |
| Max Power Consumption | 680 W (standard configuration) |
| Input Voltage | 220 V ±10% AC |
| Dimensions (L×W×H) | 350 × 400 × 730 mm |
| Net Weight | ~43 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HA-3680 |
| H₂ Flow Rate | 0–300 mL/min |
| H₂ Purity | 99.999% |
| H₂ Output Pressure | 0.4 MPa (4 kgf/cm²) |
| H₂ Pressure Stability | < 0.001 MPa |
| Zero Air Flow Rate | 0–1.5 L/min |
| Zero Air Pressure | 0–0.4 MPa |
| Hydrocarbon Content in Zero Air | < 20 ppb |
| Particulate Size in Zero Air | < 0.01 µm |
| Operating Ambient | 1–35 °C, RH ≤ 85% |
| Max Power Consumption | 680 W |
| Input Voltage | 220 V ± 10% |
| Dimensions (L×W×H) | 350 × 400 × 730 mm |
| Net Weight | ~43 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HA5500 |
| Pricing | Upon Request |
| Hydrogen Purity | >99.9995% |
| Hydrogen Flow Rate | 0–500 mL/min |
| Hydrogen Output Pressure | 0.4 MPa |
| Zero Air Flow Rate | 0–5000 mL/min |
| Total Hydrocarbon Content (THC) | <10 ppb |
| Zero Air Output Pressure | 0.1–0.6 MPa (air supply pressure dependent |
| Zero Air Dew Point | <−20 °C |
| Particulate Filtration | <0.01 µm |
| Operating Ambient | 1–40 °C, <80% RH |
| Power Consumption | 500 W |
| Dimensions (L×W×H) | 600 × 430 × 177 mm |
| Net Weight | ~15 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Nitrogen Generator |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 0–1500 mL/min |
| Output Pressure | 0–0.4 MPa |
| Nitrogen Purity | ≥99.9995% |
| Dew Point | ≤−55 °C |
| Particulate Filtration | <0.01 µm |
| Hydrocarbon Content | ≤0.1 ppm (when inlet air hydrocarbon ≤100 ppm) |
| Oxygen Content | ≤3 ppm |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 1500 W |
| Dimensions | 400 × 500 × 800 mm |
| Net Weight | 55 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Nitrogen Generator |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 0–600 mL/min |
| Output Pressure | 0–0.4 MPa |
| Nitrogen Purity | ≥99.9995% |
| Dew Point | ≤−55 °C |
| Particulate Filtration | <0.01 µm |
| Hydrocarbon Content | ≤0.1 ppm (when inlet air hydrocarbon concentration <100 ppm) |
| Oxygen Content | ≤3 ppm |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 1200 W |
| Dimensions (W×D×H) | 400 × 500 × 800 mm |
| Net Weight | ~55 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Nitrogen Generator |
| Nitrogen Generation Principle | Hollow-Fiber Membrane Separation |
| Output Flow Rate | 35 L/min @ 100 psi (customizable up to 60 L/min) |
| Output Pressure | 100 psi |
| Nitrogen Purity | Up to 99.5% |
| Dew Point | < −55 °C |
| Particulate Filtration | < 0.01 µm |
| Oil & Moisture Carryover | None |
| Phthalate-Free | Yes |
| Noise Level | < 55 dB(A) |
| Power Supply | 220 V / 50 Hz, 6 A |
| Dimensions (L×W×H) | 90 × 60 × 70 cm |
| Weight | 110 kg |
| Interface | Φ6 mm push-to-connect fitting (field-replaceable) |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | MN-10 |
| Instrument Type | Membrane-Based Nitrogen Generator |
| Nitrogen Production Principle | Hollow Fiber Membrane Separation |
| Output Flow Rate | 0–10 L/min |
| Output Pressure | 0–0.4 MPa |
| Nitrogen Purity | Up to 99.9% |
| Dew Point | < −55 °C |
| Particulate Filtration | ≤ 0.01 µm |
| Power Consumption | ≤ 650 W |
| Input Voltage | 220 V ±10% AC, 50 Hz |
| Operating Ambient | 1–35 °C, RH ≤ 85% |
| Dimensions (L×W×H) | 400 × 425 × 700 mm (excl. casters) |
| Net Weight | ~40 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | MN-30 |
| Instrument Type | Nitrogen Generator |
| Nitrogen Generation Principle | Hollow Fiber Membrane Separation |
| Output Flow Rate | >30 L/min |
| Output Pressure Range | 0–60 psi (continuously adjustable) |
| Nitrogen Purity | Up to 99.5% |
| Dew Point | ≤ −55 °C |
| Particulate Filtration | <0.01 µm |
| Oil Aerosol Content | <0.003 mg/m³ |
| Phthalate-Free | Yes |
| Operating Ambient | 5–40 °C, RH <80% (non-condensing) |
| Electrical Requirement | 220 V / 50 Hz, 1.5 kW |
| Dimensions (L×W×H) | 900 × 600 × 750 mm |
| Weight | ~110 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | NA-300 / NA-500 |
| Nitrogen Purity | <3 ppm O₂, Dew Point −56 °C |
| Nitrogen Flow Rate | 0–300 mL/min (NA-300) / 0–500 mL/min (NA-500) |
| Nitrogen Output Pressure | 0.4 MPa |
| Air Flow Rate | 0–2000 mL/min |
| Air Output Pressure | 0.4 MPa |
| Power Consumption | 210 W (NA-300) / 250 W (NA-500) |
| Dimensions (W×D×H) | 470 × 260 × 380 mm |
| Net Weight | ~28 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Model | NHA-1300 |
| Nitrogen Purity | 99.999% |
| Nitrogen Flow Rate | 0–150 mL/min |
| Nitrogen Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Hydrogen Flow Rate | 0–300 mL/min |
| Hydrogen Output Pressure | 0–0.4 MPa |
| Air Flow Rate | 0–1.5 L/min |
| Air Output Pressure | 0–0.4 MPa |
| Power Supply | 220 V ±10%, 50 Hz |
| Peak Power Consumption | 750 W |
| Operating Temperature | 5–35 °C |
| Relative Humidity | <85% RH |
| Dimensions (W×D×H, excluding casters) | 430 × 580 × 725 mm |
| Net Weight | ~52 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | NHA-2300 |
| Nitrogen Purity | 99.9995% |
| Nitrogen Flow Rate | 0–150 mL/min |
| Nitrogen Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Hydrogen Flow Rate | 0–300 mL/min |
| Hydrogen Pressure | 0–0.4 MPa |
| Zero Air Flow Rate | 0–1 L/min |
| Zero Air Pressure | 0–0.4 MPa |
| Hydrocarbon Content in Zero Air | <20 ppb |
| Power Supply | 220 V ±10%, 50 Hz |
| Peak Power Consumption | 1250 W |
| Operating Temperature | 5–35 °C |
| Relative Humidity | <85% RH |
| Dimensions (W×D×H, excluding casters) | 430 × 580 × 725 mm |
| Net Weight | ~55 kg |