Common Laboratory Equipment
Filter
Showing 5161–5190 of 17931 results
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 7 Premium |
| Max. Feed Size | < 5 mm |
| Jar Capacity | 20 / 45 / 80 mL |
| Grinding Ball Diameters | 3 / 5 / 10 / 15 / 20 mm |
| Final Fineness | < 0.1 µm |
| Main Disc Speed | up to 1100 rpm |
| Simultaneous Samples | 2 |
| Power Supply | 100–240 V, 1–, 50–60 Hz |
| Power Consumption | 1100 W |
| Net Weight | 44 kg |
| Gross Weight | 61 kg |
| Dimensions (W × H × D) | 40 × 58 × 36 cm |
| Grinding Modes | Dry & Wet |
| Optional Inert Gas Purging | Yes |
| Material Options | Agate, Silicon Nitride, Alumina, Zirconia, Stainless Steel, Tempered Steel, Tungsten Carbide |
| Interface | USB, Bluetooth, Wideband Network Connectivity |
| Programmable Time & Cooling Intervals | Down to 1-second Resolution |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 9 |
| Max. Feed Size | 12 mm |
| Effective Sample Volume | 50 / 100 / 250 mL |
| Max. Batch Capacity | 250 mL |
| Final Particle Size | 10–20 µm |
| Motor Speed | up to 1500 rpm |
| Electrical Supply | 230–240 V, 1~ , 50–60 Hz, 1200 W |
| Motor Output (VDE 0530 / EN 60034) | 1.1 kW |
| Net Weight | 267 kg |
| Gross Weight | 330 kg |
| Dimensions (W × H × D) | 77 × 76 × 116 cm |
| Brand | Froilabo |
|---|---|
| Origin | France |
| Model | AC 60 / AC 120 / AC 240 |
| Temperature Range | Ambient +5°C to 250°C |
| Temperature Uniformity | ≤ ±0.5°C at 70°C, ≤ ±1.2°C at 105°C |
| Temperature Stability | ≤ ±0.2°C at 150°C, ≤ ±0.4°C at 250°C |
| Display Resolution | 0.1°C |
| Chamber Volume | 58 L / 117 L / 230 L |
| Heating Power | 1000 W / 1000 W / 2000 W |
| Voltage | 230 V / 50 Hz |
| Internal Dimensions (W×D×H, mm) | 400×370×390 / 500×470×500 / 500×470×980 |
| External Dimensions (W×D×H, mm) | 522×540×640 / 622×640×740 / 622×640×1236 |
| Net Weight | 39 kg / 53 kg / 79 kg |
| Max. Air Exchange Rate | 50 / 35 / 35 × chamber volume per hour |
| Shelf Load Capacity (per shelf / total) | 20 kg / 50 kg / 20 kg / 70 kg / 20 kg / 90 kg |
| Shelf Quantity | 2 standard shelves |
| Shelf Grid Count | 21 / 29 / 62 |
| Shelf Size (mm) | 380×320 / 480×430 / 480×430 |
| Door | Double-glazed insulated glass with silicone gasket |
| Interior Material | AISI 304 stainless steel |
| Exterior Finish | Epoxy-polyester powder coating |
| Control System | PID digital temperature controller with over-temperature safety cut-off |
| Brand | Froilabo |
|---|---|
| Origin | France |
| Model | DC300 / DC300-4S |
| Control Type | Digital |
| Heating Plate Material | “FACT” Ceramic |
| Plate Dimensions | 300 × 300 mm |
| Heating Power | 2300 W |
| Max. Plate Temperature | 420 °C |
| Stirring Speed Range | 100–1500 rpm |
| Temp. Control Accuracy | ±0.1 °C |
| Speed Control Accuracy | ±1 rpm |
| Max. Stirring Capacity | 15 L per position |
| Timer Function | Yes (for heating & stirring) |
| Emergency Stop Button | Yes |
| Multi-position Option | 4 independent stirrer positions (DC300-4S) |
| External Dimensions (W×D×H) | 347 × 566 × 149 mm |
| Weight | 12.1 kg (DC300), 14.1 kg (DC300-4S) |
| Brand | OHAUS |
|---|---|
| Origin | USA |
| Manufacturer | OHAUS Corporation |
| Model | FC5513+R01 (230 V) |
| Instrument Type | Benchtop Microcentrifuge |
| Speed Range | 200 – 13,500 rpm |
| Max RCF | 17,317 × g |
| Max Capacity | 24 × 1.5 / 2.0 mL |
| Dimensions | 236 mm × 356 mm × 277 mm |
| Display | Backlit LCD (dual-line) |
| Motor | Brushless DC |
| Noise Level | ≤60 ± 2 dB(A) |
| Safety Certifications | CE, FCC |
| Operating Environment | 2°C – 35°C, ≤80% RH (non-condensing) |
| Weight | 13.1 kg |
| Power | 230 V, 50–60 Hz, 170 W |
| Rotor Types | Fixed-angle 24-place (1.5/2.0 mL), hermetically sealed angle rotor, capillary hematocrit rotor, 18-place spin-column rotor |
| Timer Range | 10 s – 99 h 59 min 59 s, continuous mode |
| Acceleration/Deceleration Programs | 10 each |
| Stored Protocols | 99 |
| Lid Lock | Mechanical interlock |
| Compliance | Designed for GLP-compliant workflows |
| Brand | FRYKA |
|---|---|
| Origin | Germany |
| Model | ULK 402 |
| Cooling Type | Air-Cooled |
| Temperature Range | −10 °C to +40 °C |
| Temperature Stability | ±1 °C |
| Refrigeration Capacity | 380 W @ 30 °C / 270 W @ 10 °C |
| Circulation Flow Rate | 4 L/min |
| Maximum Head Pressure | 1.5 mWS |
| Reservoir Volume | 4 L |
| Pump Pressure | 0.15 bar |
| Dimensions (W×D×H) | 26 × 37 × 40.5 cm |
| Weight | 18.2 kg |
| Ambient Operating Temperature | +12 °C to +30 °C |
| Power Supply | 230 V / 50 Hz |
| Max. Current Draw | 1.5 A |
| Brand | FRYKA |
|---|---|
| Origin | Germany |
| Model Variants | ULK 602, ULK 1002, ULK 2002 |
| Type | Integrated Air-Cooled Circulating Chiller |
| Temperature Range | −10 °C to +40 °C |
| Temperature Stability | ±0.5 °C |
| Refrigeration Capacity @ 20 °C | 650 W / 1200 W / 2300 W |
| Refrigeration Capacity @ 10 °C | — / 850 W / 1600 W |
| Refrigeration Capacity @ −10 °C | — / 400 W / 750 W |
| Flow Rate | 4 L/min / 12 L/min / 12 L/min |
| Head Pressure | 6.2 mWS / 9.2 mWS / 9.2 mWS |
| Reservoir Volume | 2.0–4.5 L / 2.0–9.5 L / 2.0–9.5 L |
| Pump Flow Control | Variable-Speed EC Fan & Intelligent Flow-Adaptive Motor |
| Display | High-Contrast Touchscreen with Real-Time Flow & Level Monitoring |
| Safety Systems | Overtemperature Protection, Dry-Run Detection, Audible/Visual Alarm, Text-Based Fault Diagnostics |
| Interface | MODBUS RTU Bus Protocol |
| Power Supply | 230 V / 50 Hz |
| Ambient Operating Range | +12 °C to +30 °C |
| Enclosure IP Rating | IP20 |
| Construction | Fully Sealed, Low-Maintenance Air-Cooling Architecture |
| Key Components | German-Sourced Compressors, EC Fans, Precision Expansion Valves, and Hermetic Refrigerant Circuits |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | FS-1 |
| Price | USD 280 (FOB Jiangsu) |
| Speed Range | 0–20,000 rpm |
| Maximum Sample Volume | 150 mL |
| Minimum Sample Volume | 5 mL |
| Shaft Material | Stainless Steel 316L |
| Drive Mechanism | Brushless DC Motor |
| Speed Control | Analog Knob with Digital RPM Display |
| Footprint | 180 × 140 × 220 mm |
| Weight | 3.2 kg |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Safety Certification | CE, RoHS compliant |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | FS-2 |
| Price | USD 390 (FOB Jiangsu) |
| Speed Range | 0–20,000 rpm |
| Power Consumption | ~180 W |
| Dimensions (W×D×H) | 280 × 200 × 480 mm |
| Brand | FSI (Flow Sciences, Inc.) |
|---|---|
| Origin | USA |
| Model | ETA-AAC |
| Airflow Velocity Range | 0.3–0.5 m/s (adjustable) |
| Sound Pressure Level | <60 dBA at 0.4 m/s |
| Filtration | Dual-stage HEPA (H14, EN 1822), BIBO lower filter |
| Filter Lifetime | ≥3 years under typical use |
| Inlet Configuration | Four-sided (top/bottom/left/right) aerodynamic arc-shaped baffles |
| Internal Flow Control | Rear laminar flow baffle + removable non-screw ceiling panel |
| Safety Compliance | OEB 3–5 validated per ISO 14644-1 Class 5 background |
| Alarm System | Thermal-anemometer-based face velocity monitor with audible/visual alert at <0.3 m/s |
| Accessories | Integrated waste bagging system, pass-through port interface, chemical-resistant phenolic resin work surface base |
| Brand | FSTAR |
|---|---|
| Origin | Liaoning, China |
| Model | F-1 |
| Sample Type | Spent photographic fixer, bleach-fix (blix), and silver plating effluents |
| Recovery Rate | ≥99.5% silver removal efficiency |
| Recovered Silver Purity | ≥99.8% (flakes) |
| Average Recovery Capacity | 110 g/h |
| Residual Silver Concentration | <0.010 g/L |
| Power Consumption | <40 W |
| Control Interface | PC-based automated control system with real-time monitoring, calendar function, and cathode thickness alarm |
| Compliance | Designed for GLP-aligned laboratory operation |
| Brand | FSTAR |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | REGO-BUG® |
| Price Range | USD $14,000 – $72,000 (FOB) |
| Sample Processing | Wastewater Treatment |
| Principle | Electrowinning via High-Surface-Area Cathode Electrolysis |
| Target Metals | Au, Ag, Rh, Pt, Pd |
| Applicable Solutions | Cyanide-based plating drag-out solutions, gold strike baths, cyanide strip solutions, rinse waters from electroplating lines |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FTA-1 |
| Pricing | Upon Request |
| Vacuum Pressure | −500 mbar |
| Collection Bottle Capacity | 1 L |
| Operating Voltage | 12 V DC |
| Input Power Supply | 12 V DC / 230 V AC adapter included |
| Hydrophobic Microbial Filter Pore Size | ≤0.027 µm |
| Filtration Efficiency | ≥99.9% |
| Tubing Material | Polyethylene (PE) |
| Footprint Dimensions | Compact, Benchtop-Optimized |
| Accessories | Dual-tip Holder Standard, Optional 8-Channel Adapter |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FTF11 |
| Pricing | Available Upon Request |
| Max Operating Temperature | 700 °C |
| Heating Chamber Dimensions (D×L) | 11 cm × 20 cm |
| External Dimensions (L×W×H) | 40 cm × 30 cm × 30 cm |
| Controller Dimensions (L×W×H) | 30 cm × 25 cm × 30 cm |
| Thermocouple Type | J-Type |
| Heating Element Material | Kanthal A-1 |
| Power Supply | 220 V, 50 Hz, 30 A |
| Rated Power at 700 °C | ~2 kW |
| Temperature Control | PID Algorithm with SCR Power Regulation |
| Cooling Method | Integrated Water-Cooling System |
| Atmosphere Options | Ambient Air, Vacuum, Inert/Reactive Gas (User-Specified), Atmospheric Pressure Range: 0–101.3 kPa |
| Mass | ~1 kg |
| Temperature Uniformity & Stability | ±0.5 °C at Setpoint (Center Zone, Steady-State) |
| Origin | Japan |
|---|---|
| Manufacturer | Fuji Denpa Co., Ltd. |
| Type | Imported Industrial Sintering System |
| Model | HIGH-MULTI-5000 / HIGH-MULTI-10000 |
| Maximum Pressing Force | 5,000 kN (HIGH-MULTI-5000) / 10,000 kN (HIGH-MULTI-10000) |
| Operating Modes | Vacuum Sintering, Controlled-Atmosphere Sintering, Hot Pressing (Manual & Automated) |
| Temperature Range | Up to 2,200 °C |
| Vacuum Level | ≤5 × 10⁻³ Pa |
| Heating Method | Graphite or Molybdenum Heater with PID-Controlled Zoning |
| Chamber Dimensions (Typical) | Ø300 × H400 mm (5,000 kN variant) |
| Compliance | ISO 9001–certified manufacturing |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Frequency | 2.45 GHz |
| Pricing | Upon Request |
| Origin | USA |
|---|---|
| Type | Box-type muffle furnace |
| Model | E14 |
| Maximum Temperature | 1093°C |
| Temperature Uniformity | ±3°C |
| Rated Power | 3120 W |
| Internal Dimensions (W×D×H) | 331 × 343 × 223 mm |
| Heating Element | Kanthal A1 resistance wire |
| Insulation | 150 mm thick refractory ceramic fiber |
| Voltage/Frequency | 230 V / 50 Hz |
| Compliance | CE, UL Listed (per UL 746A & UL 1286) |
| Brand | AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Model | Fused Tapering Machine for Fiber Combiners |
| Application | Fabrication of Pump/Signal Combiners, Couplers, and Tapered Fiber Devices |
| Control Architecture | Integrated PC-based Motion & Thermal Control System |
| Heating Mechanism | Triple-axis (X/Y/Z) Translatable Hydrogen/Oxygen Micro-flame Burner |
| Fiber Fixation | Dual Side-Pressure Grips with Stepper-Motor-Driven 360° Continuous or Stepwise Rotation |
| Platform | Precision Linear Translation Stages with Sub-micron Position Repeatability |
| Upgrade Options | Polarization-Maintaining (PM) Fiber Tapering Mode, Large-Core Multimode (LC-MM) Tapering Configuration, Tapered Fiber Sensor Development Kit |
| Brand | Future-Tech |
|---|---|
| Origin | Japan |
| Model | FTM-32AX |
| Mounting Method | Hot Compression Molding |
| Cylinder Bore Diameter | 32 mm |
| Stroke Length | 82 mm |
| Maximum Hydraulic Pressure | 4000 psi (305 kgf/cm²) |
| Heating Temperature Range | 0–200 °C (°C/°F selectable) |
| Heating Time Range | 0 s – 99 min 30 s |
| Insulation Temperature Range | 30–55 °C |
| Safety Temperature Limit | 40–60 °C |
| Heater Power | 1800 W |
| Cooling | Circulating tap water (external faucet connection) |
| Control Panel | IP55-rated waterproof touchscreen with LED illumination |
| Sample Capacity | Dual-sample mounting via spacer |
| Power Supply | Single-phase AC 200–240 V, 50/60 Hz |
| Total Power Consumption | 2200 W |
| Dimensions (W×D×H) | 463 × 650 × 610 mm |
| Net Weight | 82 kg |
| Standard Accessories | Release spray, Phenol-formaldehyde resin (800 g), spoon, funnel, pinch set, 2 m inlet/outlet hoses with clamps, 2.5 m power cord, center spacer, accessory box |
| Brand | FUXIA |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | FX-BX-15G |
| Pricing | Available Upon Request |
| Brand | FUXIA |
|---|---|
| Origin | Zhejiang, China |
| Model | SW-CJ-2F |
| Instrument Type | Vertical Laminar Flow Clean Bench |
| Cleanliness Class | ISO Class 5 (100 @ ≥0.5 µm, Fed. Std. 209E) |
| Noise Level | ≤62 dB(A) |
| Operator Capacity | Dual-operator, dual-sided |
| Airflow Pattern | Vertical downward laminar flow |
| Average Air Velocity | 0.25–0.45 m/s |
| Illumination | ≥300 lx |
| UV Lamp | 15 W × 2 |
| Fluorescent Lamp | 16 W × 2 |
| Power Supply | AC 220 V / 50 Hz |
| Power Consumption | 800 W |
| Net Weight | 200 kg |
| Working Area Dimensions | 1360 × 600 × 520 mm |
| Overall Dimensions | 1540 × 680 × 1600 mm |
| Microbial Contamination | <0.5 CFU/plate·hour (90 mm Petri dish) |
| Vibration | ≤0.5 µm (peak-to-peak, XYZ axes) |
| Control Interface | Digital LCD with three-speed fan control |
| Safety Interlock | UV lamp and lighting circuits mutually interlocked |
| Brand | FUXIA |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SW-CJ-2K |
| Instrument Type | Filter-Based Air Purifier |
| Recommended Coverage Area | 25 m² |
| Noise Level | <60 dB(A) |
| Airflow Velocity | 0.3–0.6 m/s |
| Cleanliness Class | ISO Class 5 (100-level) |
| Dimensions (W×D×H) | 800 × 350 × 880 mm |
| Power Supply | AC 220 V, 50 Hz |
| Power Consumption | 150 W/h |
| Airflow Capacity | 1000 m³/h (dual-fan configuration) |
| UV-C Germicidal Lamp | Integrated |
| Control Interface | Digital display with programmable timer (1–6 time slots), IR remote & manual operation |
| Duct Requirement | 160 mm PVC duct connection required |
| Origin | Italy |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FVA/A1 |
| Instrument Type | Benchtop |
| Max Temperature | 120 °C |
| Max Pressure | 0.145 MPa |
| Chamber Dimensions | 400 × 600 mm (D × H) |
| External Dimensions | 600 × 600 × 1400 mm (W × D × H) |
| Chamber Volume | 80 L |
| Construction Material | 316L Stainless Steel (Chamber, Pneumatic Valves, Fluidic Components) |
| Door System | Pneumatically Actuated Sealing Ring (Single or Dual Hinge Options) |
| Filtration | Vertical Condensate-Free Filter Assembly |
| Cooling | Rapid Post-Cycle Cooling Function |
| Software | DCS PLUS 10 Validated Control System |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model Numbers | FW-135, FW-177, F120 |
| Motor Power | 200 W (FW-135), 460 W (FW-177), 180 W (F120) |
| Voltage | 220 V AC |
| Rotational Speed | 10,000 rpm (FW-135), 24,000 rpm (FW-177), 1,400 rpm (F120) |
| Overall Dimensions | φ130×250 mm (FW-135), φ140×290 mm (FW-177), 300×185×300 mm (F120) |
| Particle Size Range | 60–200 µm |
| Construction | Stainless Steel Grinding Chamber |
| Application-Specific Design | Adjustable Clearance for Fibrous & Oily Samples (F102/F120 variant) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | FW-135 |
| Power | 200 W, 220 V AC |
| Rated Speed | 10,000 rpm |
| External Dimensions | φ130 × 250 mm |
| Particle Size Range | 60–200 µm |
| Price | USD 215 (FOB Shanghai) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | FW-177 |
| Power | 460 W, 220 V AC |
| Rated Speed | 24,000 rpm |
| External Dimensions | Ø140 × 290 mm |
| Particle Size Range | 60–200 µm |
| Price | USD 255 (FOB Shanghai) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | FW-4A |
| Price | USD 820 (FOB Beijing) |
| Instrument Type | Manual Hydraulic Pellet Press |
| Rated Working Pressure | 240 kN (24 metric tons, 38 MPa) |
| Ultimate Pressure | 300 kN (30 metric tons, 47 MPa) |
| Pressure Stability | ≤1 MPa drop over 5 min |
| Piston Stroke | 30 mm |
| Working Chamber Dimensions | 100 × 100 × 100 mm |
| Hydraulic Fluid | ISO VG 32 mineral oil |
| Overall Dimensions | 200 × 250 × 450 mm |
| Net Weight | 33 kg |
| Key | Origin: Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | FW-100 / FW-80 / F102 |
| Power Supply | FW-80: 200 W, 220 V |
| FW-100 | 460 W, 220 V |
| F102 | 180 W, 220 V |
| Rotational Speed | FW-80: 10,000 rpm |
| FW-100 | 24,000 rpm |
| F102 | 1,400 rpm |
| Dimensions (L×W×H) | FW-80: φ130 × 250 mm |
| FW-100 | φ140 × 290 mm |
| F102 | 300 × 185 × 300 mm |
| Particle Size Range | 60–180 µm (FW-80/FW-100) |
| Construction | Stainless steel grinding chamber |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | FW400A |
| Instrument Type | Laboratory Crusher |
| Sample Applicability | Hard & Brittle Materials |
| Feed Size | ≤20 mm (max. 200 g batch) |
| Output Particle Size Range | 50–300 µm |
| Final Output Granularity | ≥0.5 mm |
| Rated Voltage/Frequency | 220 V ±10%, 50 Hz |
| Power Consumption | 1000 W |
| Rotational Speed | 26,000 rpm |
| Crushing Chamber Dimensions | Ø150 × 80 mm |
| Overall Dimensions | 230 × 190 × 420 mm |
| Weight | Approx. 18.5 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | FZ102 |
| Price | USD 130 (FOB Shanghai) |
| Power Supply | 180 W, 220 V AC |
| Rated Speed | 1400 rpm |
| Dimensions (L×W×H) | 300 × 185 × 300 mm |
| Particle Size Output | 60–120 mesh (approx. 250–125 µm) |
| Construction | Stainless Steel Grinding Chamber & Cutting Assembly |
| Feed Material Compatibility | Dry botanicals, animal tissues (skin, hair, muscle), cereals, legumes, soil, minerals, pharmaceutical herbs |