Common Laboratory Equipment
Filter
Showing 871–900 of 4952 results
| Brand | AS ONE |
|---|---|
| Origin | Japan |
| Manufacturer | AS ONE Co., Ltd. |
| Product Type | Electrolytic Desiccator Cabinet |
| Model No. | 1-5466-21 |
| External Dimensions | 400 × 350 × 453 mm |
| Internal Dimensions | 398 × 324 × 409 mm |
| Power Supply | AC 100 V, 50/60 Hz, 3 W |
| Dehumidification Principle | Solid Polymer Electrolyte (SPE) Membrane Electrolysis |
| Minimum Achievable Humidity | 25 %RH (empty chamber, ambient-dependent) |
| SPE Membrane Area | 30 × 30 mm |
| Cabinet Construction | Steel body with melamine baked finish, front panel: tempered glass |
| Display | Digital THA-01M Temperature & Relative Humidity Monitor |
| Weight | 10 kg |
| Included Accessories | 1 adjustable shelf, 2 keys, THA-01M display unit, AC adapter plug (Japan standard) |
| Brand | AS ONE |
|---|---|
| Origin | Japan |
| Manufacturer | AS ONE Co., Ltd. |
| Model | 1-4601-31-91 |
| Temperature Range | Room Temp +10°C to 350°C |
| Plate Dimensions | 170 × 170 mm |
| Power Supply | AC 220 V, 50/60 Hz |
| Compliance | RoHS 2 Directive (EU) 2015/863 |
| Brand | AS ONE |
|---|---|
| Origin | Japan |
| Manufacturer | AS ONE Co., Ltd. |
| Model No. | 1-4601-32-91 |
| Temperature Range | RT +10°C to 350°C |
| Plate Dimensions | 250 × 250 mm |
| Power Supply | AC 220 V, 50/60 Hz |
| Brand | AS ONE |
|---|---|
| Model | PS-MINI |
| Type | Magnetic Stirrer |
| Max Speed | 1500 rpm |
| Recommended Volume | 0.3 L |
| Power Supply | DC 5 V (via USB or included AC adapter) |
| Housing Material | Polypropylene (PP) |
| Top Plate Material | Stainless Steel (SUS304) |
| Magnet Strength | 0.08 T |
| Dimensions (W×D×H) | 134 × 95 × 52 mm |
| Weight | 350 g |
| Power Consumption | ~2 W |
| Compliance | CE-marked for laboratory use |
| Accessories | AC adapter included |
| Brand | AS ONE |
|---|---|
| Origin | Japan |
| Manufacturer | AS ONE Corporation |
| Type | Electrolytic Desiccator Cabinet |
| Model No. | 1-5489-11 |
| Power Consumption | 3 W |
| Humidity Control Range | Down to 25% RH (ambient-dependent) |
| Chamber Dimensions (W×D×H) | 300 × 300 × 440 mm |
| External Dimensions (W×D×H) | 310 × 359 × 450 mm |
| Weight | 3.9 kg |
| Construction Material | ABS Resin |
| Power Supply | AC 100 V, 50/60 Hz |
| Shelf Configuration | 2 adjustable shelves, 70 mm spacing |
| Included Accessories | 2 shelves, analog hygrometer/thermometer |
| Dehumidification Principle | Solid Polymer Electrolyte (SPE) Membrane Electrolysis |
| Noise Level | Near-silent (no moving parts) |
| Compliance | Designed for GLP-compliant storage environments |
| Brand | AS ONE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | C4-2732-01 (SOC-700) / C4-2732-02 (SOC-1100) |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Air-Cooled |
| Temperature Control Range | −15 °C to +30 °C (SOC-700) |
| Refrigeration Capacity | 460 W at ΔT = 10 °C (SOC-700) |
| Temperature Stability | ±1.0 °C |
| Circulation Flow Rate | 12 L/min (SOC-700) |
| Max Head | 8 m (SOC-700) |
| Reservoir Volume | 5.0 L (liquid volume ~4.2 L) |
| Working Mode | Air-Cooled, Closed-Loop Circulation |
| Refrigerant | R-134a |
| Heat Exchanger Material | Brazed Plate Type, SUS316L/SUS304 |
| Reservoir Material | SUS304 |
| External Nozzle | Metal, OD 10 mm (compatible with tubing ID φ8–9 mm) |
| Dimensions (W×D×H) | 212 × 482 × 637 mm |
| Net Weight | 30 kg (SOC-700) |
| Ambient Operating Temperature | 5–30 °C |
| Power Supply | AC 220 V, 50/60 Hz |
| Safety Protections | Leakage Current Protection, Overcurrent Circuit Breaker, Compressor Delay Timer, Low-Water-Level Sensor, Compressor Overload Relay, Upper/Lower Temperature Limit Alarms |
| Brand | AS ONE |
|---|---|
| Origin | Japan |
| Manufacturer | AS ONE Corporation |
| Product Category | Imported Laboratory Equipment |
| Model No. | 1-5504-83 |
| Instrument Type | Vacuum-Style Desiccator Cabinet |
| Dehumidification Method | Solid Polymer Electrolyte Membrane (Electrolytic Water Removal) |
| Power Supply | 230 V ±10% AC |
| Average Power Consumption | 4 W |
| Cabinet Body Material | PMMA (Polymethyl Methacrylate) |
| Frame Material | Anodized Aluminum Alloy |
| Caster Type | Polyamide (PA) Wheels with Dual Braking Mechanism (φ65 mm) |
| Net Weight | 21 kg |
| External Dimensions (W×D×H) | 574 × 524 × 1135 mm |
| Internal Dimensions (W×D×H) | 560 × 483 × 864 mm |
| Included Accessories | Dedicated Step-Down Transformer |
| Brand | AS ONE |
|---|---|
| Origin | Japan |
| Manufacturer | AS ONE Corporation |
| Product Type | Vacuum Desiccator Cabinet |
| Model No. | 1-023-01 |
| External Dimensions | 250 × 250 × 250 mm |
| Internal Chamber Dimensions | 215 × 220 × 200 mm |
| Brand | AS ONE |
|---|---|
| Origin | Japan |
| Manufacturer | AS ONE Corporation |
| Model | 1-067-01 |
| Instrument Type | Vacuum Desiccator Cabinet |
| External Dimensions | 310 × 333 × 520 mm |
| Internal Dimensions | 260 × 280 × 410 mm |
| Chamber Capacity | 30 L |
| Maximum Vacuum Level | 1 Torr (≈133 Pa) |
| Construction Material | Main Body & Transparent Panel — 25 mm Thick Cast PMMA (Polymethyl Methacrylate) |
| Shelf Dimensions | 257 × 257 × 4 mm |
| Number of Shelves | 4 (Spacing: 85 mm) |
| Shelf Load Capacity | 2 kg (uniformly distributed) |
| Net Weight | 23 kg |
| Power Interface | None (no built-in socket) |
| Brand | AS ONE |
|---|---|
| Origin | Japan |
| Manufacturer | AS ONE Corporation |
| Model | 1-5800-01 |
| Instrument Type | Vacuum Desiccator Cabinet |
| Chamber Material | Transparent Reinforced PMMA (20 mm thick) + PC Valve & Vacuum Gauge Mounting Port |
| Sealing System | High-Integrity Silicone Gasket (Lubricant-Free) |
| Maximum Vacuum Level | ~133 Pa |
| External Dimensions (W×D×H) | 250 × 250 × 380 mm |
| Internal Dimensions (W×D×H) | 210 × 210 × 210 mm |
| Power Interface | None (Non-Electric, Passive Vacuum Operation) |
| Brand | AS ONE |
|---|---|
| Origin | Japan |
| Manufacturer | AS ONE Corporation |
| Type | Vacuum Desiccator Cabinet |
| Model | VS-1-070-01 |
| Chamber Volume | 7 L |
| Internal Dimensions | 260 × 260 × 100 mm |
| External Dimensions (excl. protrusions) | 300 × 300 × 170 mm |
| Maximum Achievable Vacuum | 133 Pa |
| Construction | Main Body & Viewing Panel — 20 mm Thick Optical-Grade PMMA (Polymethyl Methacrylate) |
| Weight | 10 kg |
| Included Accessories | Analog Vacuum Gauge (0–760 Torr / 0–101 kPa), Silicone Mat (1 pc), Dual-Port Vacuum Valve (Small Port OD φ8 mm, Large Port OD φ14 mm) |
| Brand | AS ONE |
|---|---|
| Origin | Japan |
| Manufacturer | AS ONE Corporation |
| Model | C3-6661-01 |
| Instrument Type | High-Speed Rotational Grinder |
| Rated Speed | ~28,000 rpm |
| Power Input | 1200 W AC 220 V, 50/60 Hz |
| Timer Range | 0–5 min (mechanical dial) |
| Chamber Material | Stainless Steel (SUS430) |
| Blade Material | Spring Steel |
| Lid Handle Material | Aluminum |
| Dimensions (W×D×H) | 175 × 162 × 355 mm |
| Net Weight | 4.2 kg |
| Cord Length | 1.5 m (3-pin grounded) |
| Processing Capacity | 200 mL |
| Accessories Included | 1 × grinding blade, 1 × carbon brush, 1 × cleaning brush, 1 × fuse |
| Brand | AND/A&D |
|---|---|
| Origin | Japan |
| Model | 752AC1 / 752BC1 |
| Set Pressure Range | –0.06 to 0.3 MPa |
| Input Signal | 0–10 V / 4–20 mA (standard 10–5 V configurable) |
| Supply Pressure | Max. Output Range + 0.1 MPa |
| Power Supply | 24 VDC |
| Connection Port | 3/8″ |
| Compatible Fluid | Compressed Air (non-air media require external pilot type) |
| Sensor Type | Internal piezoresistive pressure sensor (752AC1) / External sensor interface (752BC1) |
| Input Impedance | ≥10 kΩ (voltage) / ≤300 Ω (current) |
| Mounting Orientation | Omnidirectional (no orientation-induced drift) |
| Control Algorithm | Force-Balance + Adaptive PID |
| Air Consumption | ≤1.5 L/min (low-flow variant) to ≤5 L/min (standard) |
| Weight | 1.8 kg |
| Insulation Resistance | ≥1 MΩ |
| Hysteresis | ≤±0.1% FS |
| Linearity | ≤±0.5% FS (sensor-dependent) |
| Response Time | <0.05 s (no-load) |
| Orifice Diameter | 11 mm |
| Body Material | ADC12 aluminum alloy (A2017 equivalent) |
| Diaphragm & Seal Material | NBR |
| Brand | ASAHI (A&D) |
|---|---|
| Origin | Japan |
| Model | 942BA1 / 943BA1 / 944BA1 |
| Operating Pressure Range | Up to 1.0 MPa |
| Max. Fluid Temperature | ≤150 °C |
| Wetted Materials | SUS316 Body, PTFE Diaphragm, Viton Seals |
| Control Principle | Force-Balance + PI Feedback Control |
| Input Signal Options | 0–10 V DC, 4–20 mA, or 10 V DC (configurable) |
| Supply Pressure Requirement | ≤⅔ of max. operating pressure + α (model-dependent) |
| Power Supply | 24 V DC |
| Flow Consumption | ≤1.5 L/min (standard), ≤5 L/min (high-speed variant) |
| Response Time (no-load) | <0.5 s |
| Linearity | ±1% FS |
| Hysteresis | ≤±0.2% FS |
| Resolution | ≤1/2000 of full scale |
| Electrical Isolation | >1 MΩ |
| Input Impedance | ≥1 kΩ (voltage), ≤300 Ω (current) |
| Connection Ports | 1/4″, 3/8″, 1/2″ NPT/Female |
| Orifice Diameter | 4 mm / 8 mm / 16 mm |
| Weight | 0.8 kg / 2.1 kg / 2.3 kg |
| Mounting Orientation | Omnidirectional (zero-point drift ≤±1% depending on orientation) |
| Brand | ASAHI Precision |
|---|---|
| Origin | Japan |
| Model | 601D-D05 |
| Measuring Principle | Differential Pressure (ΔP) Based Volumetric Flow Calculation |
| Wetted Materials | SUS316L |
| Operating Pressure Range | 100–300 kPa |
| Flow Range | 5–100 CCPM (mL/min) |
| Output Signal | 0–5 V DC |
| Supply Voltage | 24 V DC |
| Response Time | <1 ms |
| Ambient Temperature Range | 0–40 °C |
| Connection Port | G¼ (BSPP) |
| Weight | 700 g |
| Compliance | Designed for clean fluid applications including purified water systems |
| Sample Compatibility | Liquids compatible with SUS316L |
| Enclosure Rating | IP65 (typical for industrial transmitter housing) |
| Key | Brand: ASAHI Precision |
|---|---|
| Origin | Japan |
| Model | 635BA1 |
| Supply Pressure | Not required |
| Input Signal | 0–5 V DC (configurable to 0–10 V / 4–20 mA) |
| Output Pressure Range | 0–0.8 MPa |
| Power Supply | 24 V DC |
| Port Size | 1/8″ NPT (1/4″ available via model variant) |
| Operating Fluid | Compressed air only |
| Control Principle | Force-balance + digital PID |
| Response Time | < 0.05 s (no-load) |
| Hysteresis | ≤ ±0.05% FS |
| Linearity | ≤ ±0.3% FS (sensor-dependent) |
| Flow Consumption | ≤ 1.5 L/min (standard) |
| Weight | 0.8 kg |
| Insulation Resistance | ≥ 1 MΩ |
| Diaphragm Material | NBR |
| Body Material | ADC12 aluminum alloy |
| Seal Material | NBR |
| Sensor Interface | Analog voltage (≥10 kΩ input impedance) or current (≤300 Ω input impedance) |
| Mounting Orientation | Omnidirectional (no orientation-induced drift) |
| Orifice Diameter | 4 mm |
| Compliance | CE-marked |
| Brand | ASAHI Precision |
|---|---|
| Origin | Japan |
| Model | 6640AA1 |
| Supply Pressure Range | Up to 0.85 MPa (max input = set range + 0.05 MPa) |
| Output Pressure Range (Selectable) | 0–0.8 MPa (AA1), 0–0.3 MPa (AB1), 0–0.1 MPa (AD1), 0–1.0 MPa (AH1) |
| Input Signal | 0–5 V DC (optional: 0–10 V DC or 4–20 mA, specify at order) |
| Power Supply | 24 V DC ±10% |
| Sensor Type | Built-in pressure sensor (A-series) or external analog sensor interface (B-series, supports pressure/flow/position sensors) |
| Input Impedance | ≥10 kΩ (voltage), ≤300 Ω (current) |
| Hysteresis | ≤±0.05% FS |
| Linearity | ≤±0.3% FS (sensor-dependent) |
| Response Time (no-load) | <0.05 s |
| Flow Consumption | ≤1.5 L/min (standard), ≤5 L/min (high-speed variant) |
| Orifice Diameter | 4 mm |
| Weight | 0.8 kg |
| Housing Material | ADC12 aluminum die-cast |
| Internal Components | A2017 aluminum alloy, SUS304 stainless steel |
| Diaphragm | NBR or Viton® |
| Seals | Viton® |
| Insulation Resistance | >1 MΩ |
| Mounting Orientation | Omnidirectional (no orientation-induced drift) |
| Fluid Compatibility | Compressed air (non-air media require externally piloted configuration) |
| Brand | ASAHI Precision (A&D) |
|---|---|
| Origin | Japan |
| Model | 735BB1 |
| Pressure Range | 0–0.3 MPa |
| Input Signal | 0–5 V DC (configurable to 0–10 V or 4–20 mA) |
| Supply | External pilot pressure required, no internal air supply |
| Power | 24 V DC |
| Port Size | 3/8″ NPT |
| Valve Body Material | ADC12 aluminum alloy |
| Diaphragm & Seal Material | NBR standard (Viton, Teflon, polyurethane optional) |
| Orifice Diameter | 11 mm |
| Response Time | <0.05 s (no-load) |
| Hysteresis | ≤ ±0.05% FS |
| Linearity | ≤ ±0.3% FS (sensor-dependent) |
| Consumption | ≤1.5 L/min (standard), up to 5 L/min (high-speed variant) |
| Weight | 1.8 kg |
| Insulation Resistance | >1 MΩ |
| Mounting Orientation | Omnidirectional (no orientation-induced drift) |
| Sensor Compatibility | External analog sensors — pressure (voltage/current), flow, position (0–10 V or 4–20 mA) |
| Control Principle | Force-balance + digital PID algorithm |
| Operating Fluid | Compressed air only (external pilot-controlled relief mode) |
| Brand | A&D (AND) |
|---|---|
| Origin | Japan |
| Model | 913BA1 / 914BA1 / 916BA1 |
| Operating Pressure Range | Up to 1.5 MPa |
| Input Signal | 0–10 V DC, 4–20 mA (configurable) |
| Pilot Pressure | 0.3 MPa |
| Supply Voltage | 24 V DC |
| Port Size | 1/4", 3/8", 1/2" |
| Fluid Compatibility | Liquids and gases non-corrosive to PTFE, Viton®, and brass |
| Input Impedance | ≥1 kΩ (voltage), ≤300 Ω (current) |
| Control Principle | Force-Balance + PI Algorithm |
| Hysteresis | ≤±0.2% FS |
| Linearity | ≤±1% FS |
| Response Time | <0.5 s (no-load) |
| Flow Consumption | ≤1.5 L/min (standard), ≤5 L/min (high-speed) |
| Weight | 2.2 kg / 3.4 kg / 6.8 kg |
| Valve Body Material | Brass |
| Diaphragm | PTFE |
| Seal Material | Viton® |
| Insulation Resistance | >1 MΩ |
| Mounting Orientation | Omnidirectional (zero-point drift ≤±1% FS dependent on orientation) |
| Orifice Diameter | 6 mm / 10 mm / 14 mm |
| Brand | ASAHI Precision (A&D) |
|---|---|
| Origin | Japan |
| Model | 944BA1 |
| Operating Pressure Range | Up to 1.0 MPa |
| Input Signal Options | 0–5 V, 0–10 V, or 4–20 mA (configurable via model suffix) |
| Pilot Pressure Requirement | ≤ 2/3 × max. operating pressure + α |
| Power Supply | 24 VDC |
| Port Size | 1/2″ |
| Fluid Compatibility | Liquids and gases non-corrosive to PTFE, Viton®, and brass |
| Diaphragm Material | PTFE |
| Seal Material | Viton® |
| Valve Body Material | Brass |
| Full-Scale Orifice Diameter | Φ16 mm |
| Zero Drift | ±1% FS (orientation-dependent) |
| Control Principle | Force-balance + PI feedback control |
| Hysteresis | ≤ ±0.2% FS |
| Linearity | ≤ ±1% FS |
| Response Time (no-load) | < 0.5 s |
| Air Consumption | ≤ 5 L/min (high-speed variant) |
| Weight | 2.3 kg |
| Insulation Resistance | > 1 MΩ |
| Input Impedance | ≥ 1 kΩ (voltage), ≤ 300 Ω (current) |
| Brand | ASAHI Precision |
|---|---|
| Origin | Japan |
| Model | S650SML / S650SMH |
| Pressure Range (S650SML) | 3.5–700 kPa |
| Pressure Range (S650SMH) | 12.5–2500 kPa |
| Set Resolution | 0.01 kPa (S650SML), 0.1 kPa (S650SMH) |
| Input Signal | 0–10 V DC |
| Supply Pressure | 800 ± 20 kPa (S650SML), 3000 ± 200 kPa (S650SMH) |
| Accuracy | ±0.14% FS |
| Zero & Span Temp. Coefficient | ±0.018% FS/°C |
| Display | 5-digit LED (kPa) |
| Control Principle | Force-Balanced Electrostatic Capacitance Sensing with PI Feedback |
| Supply Voltage | 24 V DC |
| Power Input | 100 V AC |
| Warm-up Time | ≤30 min |
| Operating Temperature | 5–40 °C |
| Dimensions (W×D×H) | 280 × 210 × 133 mm |
| Weight | ~3 kg |
| Inlet/Outlet Port | Rc 1/4 (S650SML), Rc 3/8 (S650SMH) |
| Orifice Diameter | Φ4 mm (S650SML), Φ11 mm (S650SMH) |
| Max. Consumption Flow | ≤1.5 L/min |
| Insulation Resistance | ≥1 MΩ |
| Brand | ASAHI |
|---|---|
| Origin | Japan |
| Model | S670S0.3 / S670S1 |
| Input Voltage | DC 24 V |
| Supply Pressure Range (Primary) | 60–150 kPa (S670S0.3) / 140–200 kPa (S670S1) |
| Output Pressure Range (Secondary, Adjustable) | 0.15–30.00 kPa (S670S0.3) / 0.5–100.00 kPa (S670S1) |
| Max. Supply Pressure | 150 kPa / 200 kPa |
| Pressure Sensor Type | Piezoresistive Silicon |
| Display | 4-digit LED (character height 10 mm) |
| Accuracy | ±1% FS |
| Response Time | ≤5 s |
| Operating Temperature | 0–40 °C |
| Interface | Φ6 push-to-connect fittings |
| Remote Analog Input Options | 0–5 V, 0–10 V, or 4–20 mA (model-suffix coded) |
| Output Flow Rate | 0–50 nL/min |
| Dimensions (W×H×D) | 96×96×138.5 mm |
| Weight | ~1.2 kg |
| Fluid Compatibility | Dry air only |
| Compliance | CE-marked for industrial use (IEC 61000-6-2/6-4), RoHS compliant |
| Brand | ASD |
|---|---|
| Origin | Canada |
| Model | iSCS |
| Configuration | Rack-mountable (19″) or Benchtop Standalone |
| Cooling Trap Temperature | –30 °C |
| Thermal Desorption Range | Up to 300 °C |
| Valve Technology | PLSV (Precision Low-Dead-Volume Sampling Valve) |
| Operation Modes | Programmable Stepwise Release or Flash Desorption |
| Diagnostic Capability | Integrated Self-Diagnostic System |
| Connectivity | IoT-enabled for ASDevices Ecosystem |
| Sample Introduction | Front-accessible Cold Trap and Valve Assembly |
| Compliance | Designed for GLP/GMP-aligned laboratory workflows |
| Brand | ASD (Zhengye Technology) |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Precision UV Laser Cutting System |
| Laser Source | Solid-State UV Laser, 355 nm, 10 W |
| Max. Working Area | 610 mm × 500 mm (24″ × 18″) |
| XY Stage Max. Speed | 50 m/min |
| Positioning Accuracy | ±3 µm |
| Repeatability | ±1 µm |
| System Processing Accuracy | ±20 µm |
| Galvo Scan Range | 50 mm × 50 mm |
| Max. Material Thickness | <1 mm |
| Power Supply | AC 220 V / 50 Hz / 2.2 kW or 3-phase 380 V / 50 Hz / 5.5 kW |
| Dust Extraction Requirement | 516 m³/h |
| Dimensions (L×W×H) | 1818 mm × 2317 mm × 1550 mm |
| Weight | 3500 kg |
| Operating Environment | 20 °C ±2 °C, RH <60% (non-condensing), Floor Vibration Amplitude <5 µm, Acceleration <0.05 g, Load Capacity ≥2200 kgf/m² |
| Brand | ASECOS |
|---|---|
| Origin | Germany |
| Model | Q90.195.120 / Q90.195.060 |
| Fire Resistance Rating | 90 min (EN 14470-1) |
| External Dimensions (W×D×H, mm) | 1193×615×1953 (Q90.195.120) / 599×615×1953 (Q90.195.060) |
| Internal Dimensions (W×D×H, mm) | 1050×522×1647 / 450×522×1647 |
| Net Weight | 424 kg / 265 kg |
| Spill Sump Capacity | 33 L / 22 L |
| Shelf Load Capacity (uniformly distributed) | 75 kg per shelf |
| Maximum Static Load | 600 kg |
| Air Extraction Connection | DN 75 |
| Air Exchange Rate | 10×/h (94 m³/h) |
| Pressure Differential at 10× Air Exchange | 55 Pa |
| Transport Base Entry Height | 90 mm |
| Transport Base Entry Width | 1120 mm / 526 mm |
| Color Options | Cabinet Body RAL 7016 (Charcoal Grey), Door Standard RAL 1004 (Warning Yellow) or RAL 7035 (Light Grey), plus 5 optional door colors (no surcharge) |
| Brand | ASECOS |
|---|---|
| Country of Origin | Germany |
| Model | Q90.195.120.FU.WDC |
| Fire Resistance Rating | 90 min (EN 14470-1 certified) |
| External Dimensions (W×D×H) | 1193 × 615 × 1953 mm |
| Internal Dimensions (W×D×H) | 1050 × 522 × 1647 mm |
| Door Opening Depth | 1165 mm |
| Net Weight | 424 kg |
| Maximum Uniform Load per Shelf | 150 kg |
| Total Load Capacity | 600 kg |
| Spill Containment Sump Capacity | 33 L |
| Exhaust Connection | DN 75 |
| Air Exchange Rate | 10×/h (9 m³/h) |
| Differential Pressure at 10× Air Exchange | 5 Pa |
| Floor-Level Adjustment Range | ±15 mm |
| Surface Finish | Cabinet Body RAL 7016 (Charcoal Grey), Door Options RAL 1004 (Safety Yellow) or RAL 7035 (Light Grey) |
| Door Mechanism | Dual-action self-closing with integrated hydraulic closing system |
| Locking | Cylindrical lock with status indicator (red/grey LED) |
| Compliance | EN 14470-1, EN 16121, EN 16122, FM Approval UL/ULC 1275, GS Mark, CE Mark |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | Aseeker-600 |
| Instrument Category | Solid-Liquid Extraction |
| Temperature Range | Ambient to 200 °C (±0.5 °C) |
| Pressure Range | 0–20 MPa (±0.3 MPa) |
| Extraction Cell Volumes | 10 mL / 20 mL / 40 mL |
| Throughput | 6 samples in 20 min |
| Dimensions (W×D×H) | 770 mm × 608 mm × 755 mm |
| Weight | 95 kg |
| Solvent Consumption per Sample | 5–200 mL |
| Pump Flow Rate | 0.1–50 mL/min |
| Power Requirement | 100–240 VAC ±10 %, 50–60 Hz |
| Max Power Consumption | 1.7 kW |
| Gas Supply | Lab-grade nitrogen, 0.4–1 MPa |
| Solvent Mixing Capability | Up to 4 solvents |
| Collection Vial Capacity | 250 mL |
| Cleaning Stations | 6 |
| Sample Contact Materials | PEEK, PTFE, 316L stainless steel, ceramic |
| Brand | ASI |
|---|---|
| Origin | South Korea |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INVIVO 4D |
| Pricing | Available Upon Request |
| Brand | ASIDA |
|---|---|
| Model | CQ2000 |
| Origin | Guangdong, China |
| Instrument Type | Metallographic Slitting & Precision Cutting System for Prepreg Rolls |
| Cutting Accuracy | ±1 mm |
| Cut Edge Quality | No whitening, delamination, wrinkling, charring, or stringing |
| Dust Reduction | >95% vs. conventional mechanical cutting |
| Cutting Frequency (500 mm length) | ≤18 cuts/min |
| Cut Length Range | 250–750 mm |
| Cut Width Range | 200–1270 mm |
| Material Thickness Range | 0.04–0.3 mm |
| Dimensions (L×W×H) | 2657 × 2200 × 1658 mm |
| Weight | 1800 kg |
| [Brand | Asida |
|---|---|
| Origin | Guangdong, China |
| Model | LV12 |
| Test Method | Static Extraction |
| Measurement Accuracy | ±5% |
| Conductivity Resolution | 0.001 µS/cm |
| Sample Plate Size Range | 10 cm × 10 cm to 60 cm × 35 cm |
| Extractant Density | 0.85–0.855 g/cm³ |
| Extractant Volume | ~17 L |
| Water Tank Dimensions | 352 mm × 70 mm × 600 mm (L×W×H) |
| Overall Dimensions | 1050 mm × 600 mm × 920 mm (L×W×H) |
| Power Consumption | 1300 W |
| Input Voltage/Frequency | 220 V / 50 Hz |
| Net Weight | ~115 kg |
| Operating Ambient Temperature | 22 ± 3 °C |
| Extractant Temperature Control | 40 ± 2 °C |
| Compliance | GB/T 4677.22a, GB/T 18268, SJ/T 11364, IPC-6012B Clause 3.9, IPC-TM-650 2.3.25B] |