Electronic Measurement Instruments
Filter
Showing 61–90 of 274 results
| Brand | BNC |
|---|---|
| Origin | USA |
| Model | 645 |
| Frequency Range | 50 MHz sine / 10 MHz arbitrary waveform |
| DAC Resolution | 14-bit |
| Sampling Rate | 125 MSa/s |
| Arb Memory Depth | 256 kPoints |
| Waveform Generator Width | 16 bits |
| Memory Depth (Graphics Mode) | 256 kPoints |
| Output Types | Pulse, Ramp, Triangle, Noise |
| Modulation Modes | AM, FM, PM (PSK), FSK, PWM |
| Sweep Types | Linear & Logarithmic |
| Interfaces | USB, LAN, GPIB |
| Software | wavePRO waveform creation, editing, and import |
| Brand | BNC |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 725 |
| Pricing | Upon Request |
| Resolution | 10 ns |
| External Trigger Inputs | 8 |
| Internal Trigger Inputs | 7 |
| Logic Output Voltage Range | 0.1–4.5 V |
| Brand | Ceyear |
|---|---|
| Model | 1466 Series |
| Type | Analog Microwave Signal Generator |
| Frequency Range | 6 kHz to 110 GHz (coaxial, standard) |
| Phase Noise | –132 dBc/Hz @ 10 GHz carrier, 10 kHz offset (typ.) |
| Spurious | < –80 dBc @ 10 GHz carrier |
| Harmonics | < –55 dBc |
| Output Power Range | –150 dBm to +25 dBm (configurable, >170 dB dynamic range) |
| Modulation | AM, FM, ΦM, Pulse (min. pulse width 20 ns), complex pulse modes (dual-pulse, burst, PRI stagger/jitter/ramp) |
| Scan Modes | Stepped, List, Analog (ramp), Power Sweep |
| Touchscreen Interface | 11.6″ HD capacitive display |
| Remote Control | SCPI-compliant, web browser & cross-platform client support, SCPI script recording & auto-generation for C++, C#, Qt, MATLAB, LabVIEW |
| Brand | Ceyear |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | 3671 Series (3671C: 100 kHz–14 GHz |
| 3671D | 100 kHz–20 GHz |
| 3671E | 100 kHz–26.5 GHz |
| 3671G | 10 MHz–43.5 GHz) |
| Calibration Options | Response, One-Port, Response-Isolation, Enhanced Response, Full Two-Port SOLT, TRL, Electronic Calibration (ECal) |
| Display Formats | Log Magnitude, Linear Magnitude, SWR, Phase, Group Delay, Smith Chart, Polar Plot |
| Interfaces | USB 2.0/3.0, LAN (10/100/1000BASE-T), GPIB (IEEE-488.2), VGA, HDMI |
| Dynamic Range | >120 dB (typ. at 1 GHz, 10 Hz IFBW) |
| Sweep Speed | 43 ms for 201 points across full frequency range (600 kHz IF bandwidth, typical) |
| Software Compliance | Supports ASTM E29, ISO/IEC 17025 traceability workflows, GLP/GMP audit trail logging (via optional secure firmware mode) |
| Optional Modules | Time-Domain Reflectometry (TDR), Advanced Time-Domain Analysis (including virtual eye diagram generation, jitter/noise injection, pre-emphasis/CTLE equalization simulation), Automatic Fixture Removal (AFR) |
| Brand | Ceyear |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Line | 3672A (10 MHz–13.5 GHz), 3672B (10 MHz–26.5 GHz), 3672C (10 MHz–43.5 GHz), 3672D (10 MHz–50 GHz), 3672E (10 MHz–67 GHz) |
| Calibration Methods | Frequency Response, One-Port, Response-Isolation, Enhanced Response, Full Two-Port SOLT, TRL, Electronic Calibration (ECal) |
| Display Formats | Log Magnitude, Linear Magnitude, VSWR, Phase, Group Delay, Smith Chart, Polar Plot |
| Interfaces | USB 2.0/3.0, LAN (10/100/1000BASE-T), GPIB (IEEE-488.2), VGA |
| Operating System | Embedded Windows Platform |
| Dynamic Range | >130 dB (typ. at 10 GHz, depending on model and IF bandwidth) |
| Trace Noise | <0.005 dBrms (1 kHz IFBW, 3672B typical) |
| Channel Capacity | Up to 64 measurement channels |
| Window Capacity | Up to 32 simultaneous display windows, 16 traces per window |
| Optional Features | Pulse S-parameter Measurement, Mixer/Converter Characterization, Gain Compression (Pout vs. Pin & Freq), Time-Domain Reflectometry (TDR), Advanced Time-Domain Analysis (ATDA), Fixture De-embedding (Single-ended & Differential), Virtual Eye Diagram Generation (with PRBS emulation), Jitter/Noise Injection, Pre-emphasis & Equalization Simulation |
| Brand | Ceyear |
|---|---|
| Origin | China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Model | 5201 |
| Supported Data Rates | 1 Gbps, 10 Gbps, 25 Gbps, 40 Gbps, 50 Gbps, 100 Gbps |
| Max Port Density | 80 × 100G ports (across 4 slots) |
| Layer Coverage | L2–L3 |
| Compliance | RFC 2544, RFC 2889, RFC 3918 |
| Synchronization | Precision PTP/IEEE 1588 v2 and SyncE support |
| Scalability | Multi-chassis clustering with deterministic latency synchronization |
| Software Architecture | Modular test application framework with CLI, GUI, and RESTful API interfaces |
| Pricing | Available upon technical evaluation and configuration quote |
| Brand | Ceyear |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | 6935DE |
| Pricing | Available Upon Request |
| Brand | Chauvin Arnoux |
|---|---|
| Origin | France |
| Model | CA922 / CA942 |
| Bandwidth | 20 MHz (CA922), 40 MHz (CA942) |
| Sampling Rate | 50 MS/s (real-time), 2 GS/s (equivalent for CA942) |
| Vertical Sensitivity | 5 mV/div to 200 V/div |
| Time Base Range | 25 ns/div to 200 s/div |
| Input Channels | 2 isolated, CAT III 600 V rated |
| Acquisition Depth | 2,500 points/channel |
| Display | Color TFT with LED backlight |
| IP Rating | IP54 |
| Safety Compliance | IEC/EN 61010-1, CAT II 1000 V / CAT III 600 V |
| Certifications | CE, UKCA, RoHS |
| Battery | 6 × 1.2 V NiMH AA rechargeable |
| Runtime | 5h45m–8h30m |
| Dimensions | 214 × 110 × 57 mm |
| Weight (with battery) | 0.96 kg |
| Storage Memory | 2 MB (500 kB system-reserved) |
| Harmonic Analysis | Up to 31st harmonic, fundamental range 40–450 Hz |
| Multimeter | 8,000-count, AC/DC voltage, resistance, capacitance, frequency |
| Interface | Isolated USB (SCPI-compliant) |
| Brand | Auniontech (Authorized Distributor of Chroma Technology Corp.) |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Model Designation | Standard & Custom Bandpass Filter Series |
| Pricing | Available Upon Request |
| Brand | Chroma |
|---|---|
| Model | ET680sp |
| Type | Hard-Coated Interference Short-Pass Filter |
| Substrate | Fused Silica or BK7 (Customizable) |
| Cut-On Wavelength | 680 nm (Nominal) |
| Transmission Range | 200–680 nm |
| Blocking Range | 700–3500 nm |
| Peak Transmission | ≥95% (Typical, Uncoated Substrate Dependent) |
| Optical Density (OD) in Blocking Region | OD6–OD8+ @ 750–3500 nm |
| Edge Steepness (10%–90% Transition) | <15 nm |
| Coating Technology | Ion-Assisted Magnetron Sputtering (IAD) |
| Layer Count | 200–300 Dielectric Layers |
| Environmental Durability | MIL-C-48497A Compliant |
| Surface Quality | 20–10 Scratch-Dig |
| Parallelism | <3 arcsec |
| Clear Aperture | ≥90% of Diameter |
| Customization Available | CWL, Slope, Size, Mounting, AR Coating on Back Surface |
| Brand | Auniontech (Authorized Distributor of Chroma) |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | ZT488dcrb |
| Price | Upon Request |
| Brand | CocoResearch |
|---|---|
| Origin | Japan |
| Model | RR-2401 / RRL-2401 |
| Measurement Ranges | 150 Ω / 1.5 kΩ / 10 kΩ / 40 kΩ |
| Resolution | 0.01 Ω / 0.1 Ω / 1 Ω / 10 Ω (per range) |
| Analog Output | 16-bit, 0–5 V / 0–10 V / 4–20 mA (configurable) |
| Power Supply | DC 12 V / 24 V / 48 V (wide-range input) |
| Mounting | 24 mm × 48 mm DIN rail panel cutout |
| Optional Outputs | Simultaneous analog + CAN 2.0A/B (ISO 11898-2 compliant) |
| Zero & Span Calibration | User-adjustable via front-panel or remote command |
| Brand | DELTA Instruments |
|---|---|
| Model | GS-DELTA1079 |
| Voltage Range | ±10 V |
| Voltage Resolution | 0.1 mV |
| Voltage Accuracy | ±(1% of Vp-p setting + 2 mVp-p) |
| Frequency Range | 0.01 µHz – 5 MHz |
| Frequency Resolution | 0.01 µHz |
| Frequency Accuracy | ±(3 ppm of setting + 2 pHz) |
| Lead Configuration | 12-lead compatible |
| Compliance | GB 9706.225–2021, IEC 60601-2-25:2011, YY 1079–2008, JJG 1041–2008 |
| ECG Simulation | Standard waveform (1333.3 ms period), 6 arrhythmia modes (20–300 bpm), pacing pulse (0.1/1/10 ms, ±0.5%), dual-source composite signal generation (sine + square) |
| CMRR Test Module | Input 1–20 Vrms @ 50/60/100/120 Hz |
| Electrosurgical Interference Test Module | ECG rate ~73 bpm, ECG lead interface provided |
| Brand | Panorama |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Category | Domestic (China) |
| Model | LPMM Series |
| Pricing | Available Upon Request |
| IP Rating | IP66 |
| Mounting | Panel-Mount (Conductive or Non-Conductive Surfaces) |
| Frequency Bands | 3.4–3.8 GHz & 4.9–6.0 GHz |
| MIMO Configuration | 4×4 |
| Form Factor | Ultra-Thin, Compact Enclosure |
| Integrated Cable | RG174 |
| Compliance | RoHS, FCC Part 15 Subpart B (as applicable to host system), CE RED Directive (when integrated into compliant end equipment) |
| Brand | Panorama |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Category | Domestic (China) |
| Model | B4BE Series |
| Pricing | Available Upon Request |
| Brand | Desite Instruments |
|---|---|
| Origin | USA |
| Model | TS-PS6000P |
| Frequency Range | 3.5–6.0 GHz |
| Phase Range | 0–355° |
| Phase Resolution | 5.625° |
| Input Power Range | < +25 dBm |
| Insertion Loss | 5–6 dB |
| Return Loss | >12 dB (typ.) |
| Bidirectional Operation | Yes |
| Control Interface | USB and optional Ethernet |
| Power Supply | Micro-USB (5 V) |
| Housing | Powder-coated aluminum |
| Connectors | Gold-plated SMA |
| Display | OLED |
| Audio Feedback | Integrated beep indicator |
| Brand | Panorama |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | DMM Series |
| Pricing | Available Upon Request |
| Key | Brand: DS Instruments |
|---|---|
| Origin | USA |
| Model | TS-TG12000 |
| Frequency Range (Tracking Mode) | DC–12 GHz (3 bands: 0–2.5 GHz, 2.0–5.8 GHz, 5.8–12 GHz) |
| Frequency Range (Standalone RF Source) | 25–6000 MHz |
| Typical TG Output Power | –3 dBm (Bands 1 & 2), –8 dBm (Band 3) |
| Reference Input | 10 MHz via SMA |
| Power Supply | USB-powered (5 VDC) |
| Enclosure | Machined aluminum |
| Connectors | SMA (front), MCX (rear), USB-B |
| Control Interface | USB Virtual COM port, SCPI-compliant |
| Dimensions | 2.75" × 4.15" × 1.15" (70 × 105 × 29 mm) |
| Compliance | CE, FCC Part 15 Class B |
| Software | Windows-based PC control application included |
![DesTest DWMM4[G]-6-60 Series 4×4 MIMO Omnidirectional Antenna for 4G/5G LTE and GNSS](https://img.instrumenthive.com/raw_images/IH-143150-1.webp "DesTest DWMM4[G]-6-60 Series 4×4 MIMO Omnidirectional Antenna for 4G/5G LTE and GNSS")
| Brand | Panorama |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | DWMM4 Series |
| Pricing | Available Upon Request |
| Frequency Range | 617–6000 MHz |
| GPS/GNSS Integration | Yes (with 26 dB LNA and bandpass filtering) |
| Ingress Protection | IP66 |
| Cable Type | Integrated Flame-Retardant CS32 (RF), FR CS29 (GNSS) |
| Mounting Options | Wall, Mast, Panel, Desk |
| Radiation Pattern | Omnidirectional |
| Brand | DesTest Instruments |
|---|---|
| Origin | USA |
| Model | TS-DAT64F |
| Frequency Range | 100 MHz – 6 GHz |
| Attenuation Range | 0–63 dB |
| Step Size | 0.25 dB |
| Max Input Power | +25.0 dBm |
| Insertion Loss (at 6 GHz) | < 7 dB |
| Return Loss | > 12 dB |
| Interface | USB (SCPI-compliant), Optional Ethernet |
| Dimensions | 2.75" × 1.25" × 2.15" |
| RF Connectors | Gold-plated SMA |
| Power Supply | Micro-USB (5 V DC) |
| Key | Brand: DesTest Instruments |
|---|---|
| Origin | USA |
| Model | TS-PA6000L |
| Frequency Range | 1.5–6.0 GHz |
| Small-Signal Gain | 30 dB (typ.) |
| Minimum Gain | 0 dB |
| Gain Step Resolution | 0.25 dB |
| Typical Output Power (P1dB) | +30 dBm |
| Saturation Output Power | >+32 dBm |
| Input Return Loss | >12 dB |
| Connector Type | 18 GHz Gold-Plated Microwave SMA |
| Control Interface | Micro-USB Virtual COM Port (SCPI-compliant) |
| DC Supply | 32 VDC via Barrel Jack (adapter included) |
| Onboard Controller | Integrated for bias sequencing, linear gain regulation, and thermal/voltage monitoring |
| Brand | DS Instruments |
|---|---|
| Origin | USA |
| Model | TS-SG12000PRO |
| Frequency Range | 50–13,000 MHz (10–15,000 MHz uncalibrated) |
| Output Power Range | –30 to +15 dBm (calibrated), –21.5 to +10 dBm (calibrated at 12 GHz) |
| Phase Noise | –94 dBc/Hz @ 10 kHz offset (at 12 GHz) |
| Harmonic Level | < –30 dBc (1–13 GHz, typical) |
| Frequency Resolution | 10 Hz |
| Internal Attenuator | 64 dB (0.25 dB steps, 6–15 GHz), 32 dB (0.5 dB steps, 0–6 GHz), ~15 dB variable (10-bit DAC, 0–15 GHz) |
| Reference Input | 10 MHz & 100 MHz, internal ultra-low-noise 100 MHz OCXO |
| Connectivity | USB-C (5 V, 1.3 A), Ethernet (RJ-45), SCPI-compliant |
| Dimensions | 6.985 × 3.175 × 10.541 cm |
| RF Connector | Gold-plated 18 GHz SMA |
| Impedance | 50 Ω |
| Brand | DesTest Instruments |
|---|---|
| Origin | USA |
| Model | TS-SG22000 |
| Frequency Range | 25–22,000 MHz (24 GHz at reduced power) |
| Output Power (Band 1, calibrated) | –20 to +10 dBm in 0.5 dB steps |
| Output Power (Band 2) | > +12 dBm |
| Phase Noise | –63 dBc/Hz @ 18 GHz, 10 kHz offset |
| Reference | Internal ±280 ppb TCXO or external 10 MHz via MCX |
| Resolution | Down to <40 Hz step size |
| Sweep | Local hardware-triggered sweep support |
| Interface | USB-C (5 V / 0.75 A), SCPI-compliant, optional Ethernet |
| Display | Front-panel OLED |
| Housing | Machined aluminum enclosure |
| Dimensions | 2.75″ × 1.25″ × 4.0″ |
| RF Connectors | Dual gold-plated microwave SMA |
| Impedance | 50 Ω |
| Brand | DesTest Instruments |
|---|---|
| Origin | USA |
| Model | TS-SG4400L |
| Frequency Range | 35 MHz to 4.4 GHz |
| Output Power (Calibrated) | –20 dBm to +10 dBm |
| Output Power (Uncalibrated Cursor) | –35 dBm to +13 dBm (typ.) |
| Power Step Resolution | 0.5 dB |
| Phase Noise | –85 dBc/Hz @ 2.4 GHz, 10 kHz offset |
| Reference Input | 10 MHz TCXO (±2.5 ppm), MCX connector |
| RF Output | 50 Ω, 18 GHz rated SMA |
| Control Interfaces | USB (SCPI-compliant), optional Ethernet |
| Display | Monochrome OLED |
| Dimensions | 2.75" × 1.25" × 2.0" (70 × 32 × 51 mm) |
| Supply Voltage | 5 V DC via micro-USB |
| Brand | DesTest Instruments |
|---|---|
| Origin | USA |
| Model | TS-SG6000X |
| Frequency Range | 25 MHz – 6000 MHz |
| Output Power | –35 dBm to > +10 dBm |
| Phase Noise | –74 dBc @ 10 kHz offset |
| Internal Digital Attenuator | 64 × 0.5 dB steps |
| Variable Analog Attenuation | –10 dB (10-bit DAC) |
| Reference Input | 10 MHz MCX |
| Connectivity | USB Type-C (5 V, 1.2 A), Optional Ethernet |
| Display | Front-panel OLED |
| RF Connectors | Two gold-plated microwave-grade SMA |
| Housing | Machined black anodized aluminum |
| Dimensions | 2.75″ × 1.25″ × 3.15″ (70 × 32 × 80 mm) |
| Impedance | 50 Ω |
| Compliance | SCPI-compliant, RoHS 3, CE-marked for EMC and LVD |
| Brand | DS Instruments |
|---|---|
| Origin | USA |
| Model | TS-PS18000 |
| Frequency Range | 8–18 GHz |
| Phase Range | 0° to 355° |
| Phase Resolution | 5.625° |
| Input Power (CW) | +29 dBm |
| Insertion Loss | 10 dB (typ.) |
| Return Loss | 9 dB (typ.) |
| Input P1dB | +25 dBm |
| Input IP3 | +40 dBm |
| Interface | Micro-USB (power & control), optional Ethernet |
| Connector Type | Gold-plated 26 GHz SMA |
| Housing | Powder-coated aluminum |
| Display | OLED |
| Audio Feedback | Integrated beep confirmation |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | EEDs |
| Pricing | Available Upon Request |
| Frequency Range | 1–6 GHz |
|---|---|
| Maximum Input Power | 300 W |
| Gain (at 3 m distance) | 12.48 dBi @ 1 GHz |
| Origin | Italy |
| Type | Passive Wideband Horn Antenna |
| Compliance | Designed for EMC Radiated Emission & Immunity Testing per CISPR 16-1-4, ANSI C63.4, IEC 61000-4-3 |
| Brand | EXFO |
|---|---|
| Origin | Canada |
| Model | CT440 |
| Wavelength Range | 1240–1680 nm (SMF) |
| Wavelength Resolution | 1–250 pm |
| Wavelength Accuracy | ±5 pm |
| Dynamic Range | 65 dB (single sweep) |
| Polarization-Dependent Loss (PDL) Measurement | Optional (CT440-PDL) |
| Polarization-Maintaining (PM) Capability | Optional (CT440-PM) |
| Detector Channels | 4 integrated photodetectors |
| Tunable Laser Source (TLS) Support | Up to 4 synchronized EXFO T100S-HP series lasers |
| Rack Mount | 1U (19-inch standard) |
| Software Interface | GUI + DLL-based remote control |
| Compliance | Designed for GLP/GMP-aligned optical test environments, compatible with ASTM F2714 and IEC 61300-3-29 for passive component characterization |
| Brand | EXFO |
|---|---|
| Origin | Canada |
| Model | CTP10 |
| Dynamic Range | up to 80 dB |
| Wavelength Range | 1240–1680 nm |
| Scan Speed | up to 100 nm/s |
| Sampling Resolution | 1 pm |
| Detector Channels | up to 50 (expandable to >100 via daisy-chaining) |
| Polarization Control | SOP generation & Mueller matrix-based PDL calculation |
| OS | Dedicated real-time embedded OS |
| Remote Control | SCPI-compliant |
| Storage | High-capacity internal SSD |
| Compliance | Fully compatible with EXFO T100S-HP tunable laser series (O, ES, C, L, O+, CLU bands) |
| Optional Wavelength Reference | NIST-traceable gas cell (HCN for C-band, HF for O-band) |
| Calibration Support | SCAN SYNC module (±5 pm wavelength accuracy) |