Electronic Measurement Instruments
Filter
Showing 121–150 of 274 results
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | CX3300 Series (CX3324A Base Configuration) |
| Sampling Rate | Up to 1 GSa/s |
| Analog Bandwidth Options | 50 MHz / 100 MHz / 200 MHz |
| Resolution | 14-bit or 16-bit ADC |
| Memory Depth Options | 4 Mpts/ch to 256 Mpts/ch |
| Display | 14.1″ WXGA Capacitive Multi-Touch Screen |
| Input Channels | 4 Analog (Supporting Current Sensors, Differential Probes, Passive Probes) |
| Digital Channels | Supported via Optional Modules |
| Trigger Types | Edge, Pulse Width, Rise/Fall Time, Timeout, Logic, Serial (I²C, SPI, UART), and Custom Pattern Triggers |
| Math Functions | FFT, Integration, Differentiation, Filtering, Parametric Arithmetic, and User-Defined Expressions |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | E5063A ENA |
| Frequency Range | 50 kHz to 500 MHz, 1.5 GHz, 3 GHz, 4.5 GHz, 6.5 GHz, 8.5 GHz, 14 GHz, or 18 GHz (configurable via hardware options) |
| Dynamic Range | 117 dB (spec), 122 dB (typical) |
| Displayed Average Noise Level (DANL) | –0.005 dBrms (spec), –0.002 dBrms (typical) |
| Port Configuration | 2-port, 50 Ω S-parameter test set |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | E5071C / E5092A ENA |
| Quotation | Available Upon Request |
| Frequency Range | 9 kHz to 4.5 GHz / 6.5 GHz / 8.5 GHz (DC-blocked) |
| Output Power | –55 dBm to +10 dBm |
| Display | 10.4-inch color touchscreen |
| Interface | Windows-based GUI with pull-down menus and softkey navigation |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Model | N1000A DCA-X |
| Sampling Rate | 250 kSa/s |
| Bandwidth | >110 GHz |
| Jitter | ≤50 fs |
| Noise Floor | 275 µV |
| Max Channels | 16 |
| Supported Signal Rates | 50 Mb/s to 224 Gb/s |
| Module-Based Architecture | Yes |
| Compatibility | Legacy & Current Optical, Electrical, TDR/TDT, S-Parameter Modules |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | N5193A UXG |
| Pricing | Available Upon Request |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Model | N5291A |
| Frequency Range | 900 Hz to 120 GHz |
| Configuration | Integrated PNA or PNA-X Base Unit + N5292A Millimeter-Wave Test Controller + N5295AX03 120 GHz Frequency Extender |
| Port Options | 2-port or 4-port |
| Included | Full interconnect cabling set |
| Compliance | Designed for IEEE 1785.1, IEC 61000-4-3, MIL-STD-461G (RS103), and compatible with ISO/IEC 17025-accredited calibration workflows |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Model | N6705C |
| Type | Integrated DC Power Analyzer and Source |
| Key Functions | DC Voltage/Current Source + Precision DMM + Oscilloscope + Arbitrary Waveform Generator + Data Logger |
| Ammeter Accuracy | 0.025% + 8 nA |
| Voltmeter Accuracy | 0.025% + 50 µV |
| Voltage/Current Sampling Rate | up to 200 kHz (512 kpts memory) |
| AWG Bandwidth | up to 100 kHz |
| Max Output Power | 500 W |
| Measurement Interval Range | 20 µs to 60 s |
| Max Logging Speed | 500 M readings |
| Resolution | up to 18-bit |
| Brand | Keysight |
|---|---|
| Model | N9020B |
| Frequency Range | 10 Hz to 50 GHz |
| Analysis Bandwidth | Up to 160 MHz |
| Real-Time Bandwidth | Full-span real-time spectrum analysis |
| EVM Accuracy | ≤ 0.3% (–50 dB) |
| Touch Interface | Multi-touch capacitive display |
| I/Q Capture Duration | Extended duration for comprehensive signal characterization |
| Measurement Acceleration | Hardware-accelerated power measurements, fast cursor peak search, rapid sweep, and high-refresh-rate display |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Model | PD1500A |
| Application | Dynamic characterization of power semiconductors (SiC, GaN, IGBT, MOSFET) |
| Measurement Capabilities | Turn-on/turn-off transient waveforms, switching loss (Eon/Eoff), reverse recovery (Qrr, trr), gate charge (Qg, Qgs, Qgd), voltage/current slew rates (dv/dt, di/dt) |
| Time Resolution | Sub-nanosecond sampling synchronization |
| Safety Compliance | UL/CSA 61010-1, CAT III 1000 V input protection |
| Platform Architecture | Modular, hardware-protected, user-isolated test environment |
| Software Compliance | Supports FDA 21 CFR Part 11–compliant audit trails and electronic signatures (via PathWave B2900A-compatible firmware) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | N5245A |
| Pricing | Upon Request |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 1000 X |
| Sampling Rate | 2 GSa/s |
| Analog Channels | 4 |
| Digital Channels | 4 |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | customized-14 |
| Pricing | Available Upon Request |
| Channel Count | 68 |
| State Analysis Max Data Rate | 1.4 Gb/s |
| State Clock Rate | up to 700 MHz |
| Timing Analysis Max Sample Rate | 2.5 GHz (full channels) / 5.0 GHz (half channels) / 10 GHz (quarter channels) |
| Timing Resolution | 80 ps (12.5 GHz timing zoom) |
| Memory Depth | 2 Mb (standard), up to 512 Mb (timing, quarter-channel mode) |
| Display | 15-inch full-color capacitive touchscreen (38.1 cm diagonal) |
| Storage | Removable SSD |
| Connectivity | USB 3.0, Gigabit Ethernet |
| Trigger Sequencer | 1.4 GHz programmable sequencer |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Model | customized-11 |
| Frequency Range (RF Input) | 10 MHz to 110 GHz |
| Offset Frequency Range | 1 Hz to 100 MHz |
| Transient Capture Bandwidth | up to 80 MHz (narrowband), up to 4.8 GHz (wideband) |
| Phase & AM Noise Measurement Capability | Yes |
| Baseband Noise Analysis | 1 Hz – 100 MHz |
| Real-time Spectrum Monitoring Span | up to 15 MHz |
| Time-Domain Transient Resolution | femtosecond-level jitter analysis |
| DC Source Integration | Low-noise frequency/power/DC bias (Vc/Vs/I) for VCO characterization |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Customized-12 |
| Pricing | Upon Request |
| Frequency Range | 10 MHz to 110 GHz |
| RF Input Frequency Range | 10 MHz to 110 GHz |
| Offset Frequency Range for Phase Noise Analysis | 1 Hz to 100 MHz |
| Transient Capture Bandwidth | up to 80 MHz (narrowband), up to 4.8 GHz (wideband) |
| Real-time Spectrum Monitoring Span | up to 15 MHz |
| Baseband Noise Measurement Range | 1 Hz to 100 MHz |
| Supported Measurements | Phase Noise, AM Noise, Residual FM, Time-Domain Jitter (sub-picosecond resolution), Frequency/Phase/Power Transients |
| Triggering | Video trigger for anomalous frequency events |
| Integrated Low-Noise DC Sources | For VCO/VCXO characterization (Vc and Vs bias control) |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Model | E36300 |
| Output Channels | 3 (independently regulated) |
| Display | High-contrast backlit LCD showing simultaneous V/I readouts for all channels |
| Programming Accuracy | ±0.03% of set value (voltage and current) |
| Output Ripple & Noise | <2 mVpp / 350 µVrms (typ.) |
| Interface Options | USB 2.0, LAN (LXI-C compliant), optional GPIB (IEEE-488.2) |
| Front/Rear Output Terminals | Yes |
| Color-Coded Channels | Yes |
| Control | Dedicated voltage/current knobs per channel |
| Data Logging | Built-in time-stamped measurement recording |
| Output Sequencing & Coupling | Independent or ratio-based channel coupling modes |
| Compliance Standards | CE, UKCA, RoHS, UL/CSA 61010-1 |
| Brand | Kimball Physics, Inc. |
|---|---|
| Origin | USA |
| Model | EGH-8100 / EGPS-8100 |
| Beam Energy Range | 1 keV – 100 keV |
| Beam Current | 10 nA – 1 mA (pulsed up to 20 mA) |
| Spot Size | 3 mm – 100 mm |
| Main Vacuum Flange | 6" CF |
| Turbo Pump Flange | 4" CF |
| Instrumentation Flanges | three 2" CF ports |
| Features | In-situ internal alignment, flood beam mode, DC/pulsed operation, high-current pulsed capability |
| Brand | Kimball Physics, Inc. |
|---|---|
| Origin | USA |
| Model | EMG-4212 / EGPS-3212 |
| Energy Range | 1–20 keV |
| Beam Current (Standard) | 10 nA–100 µA |
| Beam Spot Size (Standard) | 0.5–25 mm |
| Small-Spot Option | 1 nA–10 µA / 100 µm–10 mm |
| High-Current Option | 1 µA–1 mA / 1.5–25 mm |
| Flange | 4" CF |
| Features | In-situ alignment, collimated beam output, electrostatic focusing & deflection, raster scanning, pulsed operation, beam blanking |
| Brand | Kimball Physics, Inc. |
|---|---|
| Origin | USA |
| Model | ES-Microscopy |
| Emission Current Density | Up to 30 A/cm² |
| Operating Pressure | < 10⁻⁷ Torr |
| Cathode Type | Single-Crystal LaB₆, Micro-Flat Geometry |
| Mounting Interface | Ceramic AEI-compatible Base or Custom Microscope-Specific Flange |
| Lifetime | Extended under UHV Conditions |
| Compliance | Designed for Integration into SEM, TEM, and STEM Column Systems |
| Brand | Kimball Physics, Inc. |
|---|---|
| Origin | USA |
| Model | FC-66 |
| Maximum Continuous Power Input | 4 W |
| Aperture | Customizable |
| Electrical Interface | BNC |
| Shielding | Fully Enclosed Grounded Electrostatic Shield |
| Mounting | Unmounted (Flexible Integration) |
| Brand | Kimball Physics, Inc. |
|---|---|
| Origin | USA |
| Model | PHYSICS FC-86 |
| Cooling | Water-cooled |
| Max. Beam Power | 1250 W |
| Brand | Kimball Physics, Inc. |
|---|---|
| Origin | USA |
| Model | IMG-4212 / IGPS-3212 |
| Energy Range | 1 keV – 20 keV |
| Beam Current | 1 nA – 2 µA |
| Spot Size | 500 µm – 25 mm |
| Working Distance | 100 mm – 1000 mm |
| Brand | Lake Shore |
|---|---|
| Origin | USA |
| Model | 372 |
| Type | Cryogenic AC Resistance Bridge & Dual-Channel Temperature Controller |
| Application | Sub-100 mK Dilution Refrigerator Thermometry and Sample/Heater Control |
| Compliance | Designed for GLP/GMP-aligned low-temperature physics labs |
| Brand | TOYO Corporation (Japan) |
|---|---|
| Origin | Japan |
| Model | LN-Z2-HF |
| Frequency Range | 1 kHz – 90 MHz |
| Temperature Control Range | 170 K – 300 K (with cryogenic stage) |
| Compliance | ASTM D257, ISO 60068-2-1/2, IEC 60404-6 |
| Software Interface | USB 2.0, SCPI-compatible command set |
| Data Output | Complex impedance (Z*, θ), admittance (Y*), capacitance (C), conductance (G), loss tangent (tan δ) |
| Origin | Italy |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Log Periodic Antenna |
| Frequency Range | 75–1500 MHz |
| Max Input Power | 1000 W |
| Gain | 5.91 dBi @ 80 MHz |
| Optional Configurations | Horn Antenna, Stacked Log-Periodic Array |
| Brand | MAIERIC |
|---|---|
| Origin | Anhui, China |
| Model | MTIA |
| Instrument Type | Mid-Frequency Impedance Analyzer |
| Frequency Range | 0.05 Hz – 10 MHz |
| Frequency Resolution | 0.05% of set frequency |
| Basic Measurement Accuracy | ±0.05% |
| Impedance Range | 20 mΩ – 1 GΩ |
| Measurement Speed | 10,000 samples/s |
| Measurement Modes | Four-Terminal (Kelvin), Multi-Channel (up to 128 channels) |
| Excitation Voltage Range | 0.02 V – 2.0 V (10 mV resolution) |
| Compensation Methods | Open-Short-Load, Open-Load, Short-Load, Load-only |
| Supported Parameters | Z, θ, R, X, Ls/Lp, Cs/Cp, D, Q, Y, G, B |
| Equivalent Circuit Modeling | Yes |
| Data Visualization | Sweep plots, multi-channel mapping, time-series traces |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | MAIERIC |
|---|---|
| Origin | Anhui, China |
| Model | MTIA-8 |
| Instrument Type | Medium-Frequency Impedance Analyzer |
| Frequency Range | 0.01 Hz – 10 MHz |
| Frequency Resolution | 0.05 Hz |
| Basic Measurement Accuracy | ±0.05% |
| Impedance Range | 20 mΩ – 1 GΩ |
| Measurement Speed | 10,000 samples per second |
| Channel Capacity | Up to 128 parallel measurement channels (hardware-expandable) |
| Measurement Modes | Four-Terminal (Kelvin), Multi-Channel Synchronized Acquisition |
| Excitation Voltage Range | 0.02 V – 2.0 V (10 mV resolution) |
| Compensation Methods | Open-Short-Load, Open-Load, Short-Load, Load-only |
| Supported Parameters | Z, θ, R, X, Ls/Lp, Cs/Cp, D, Q, Y, G, B, Rs, Rp |
| Equivalent Circuit Fitting | Up to 7-element models (e.g., R-C, R-L-C, R-(C//R), etc.) |
| Brand | Maury |
|---|---|
| Origin | USA |
| Model | MT1000 and MT2000 Series Mixed-Signal Active Load-Pull Systems |
| Frequency Range | 1 MHz to 67 GHz |
| Maximum Impedance Tuning Speed | 1000 impedance/power states per minute |
| Baseband/RF/Harmonic Bandwidth (MT2000) | up to 1000 MHz |
| Configurations | MT2000E6-500 (40 GHz, 6-loop, 500 MHz BW), MT2000F4-1000 (67 GHz, 4-loop, 1000 MHz BW) |
| Compliance | Designed for RFIC, MMIC, and GaN PA characterization under pulsed CW, modulated, and multi-tone conditions |
| Brand | McScience |
|---|---|
| Origin | South Korea |
| Model | M131 |
| Operating Modes | DC & AC (up to 1 kHz sinusoidal) |
| Quadrants | Four-Quadrant Source/Measure Capability |
| Compliance Function | Voltage/Current Limiting with Real-Time Protection |
| Communication Interface | Ethernet (LAN) |
| Customization | Available per customer requirements |
| Category | Semiconductor Device Testing Instrument |
| Application Scope | Flat Panel Display (LCD, OLED), Micro/Mini LED, Lithium-ion Battery Characterization, General Electronic Component Evaluation |
| Brand | Megger |
|---|---|
| Model | MIT525 |
| Test Voltage Range | 250 V to 5 kV (5 preset + user-defined) |
| Max Resistance Measurement | 10 TΩ |
| Short-Circuit Current | 3 mA |
| Accuracy | ±5% up to 1 TΩ, ±20% up to 10 TΩ |
| Display | Backlit LCD with dual-parameter readout |
| Battery | 11.1 V Li-ion, 5.2 Ah, ~6 h continuous operation at 5 kV |
| Charging | AC mains operation during test |
| Safety Rating | CAT IV 600 V, double insulation, IP65 (lid closed) |
| Compliance | IEC 61010-1, IEC 61326-1, IEC 61010-31:2008 (test leads) |
| Dimensions | 315 × 285 × 181 mm |
| Weight | 4.5 kg |
| Data Interface | Isolated USB-B (device mode), compatible with Megger PowerDB Lite |
| Diagnostic Modes | PI, DAR, DD, SV, Ramp Test |
| Voltage Meter Function | 30–660 V ac/dc, ±3% ±3 V |
| Noise Rejection | Up to 3 mA interference suppression |
| Altitude Operation | Rated CAT IV 600 V up to 3000 m |
| Key | Brand: Megger |
|---|---|
| Model | MIT525 |
| Test Voltage Range | 50 V to 5 kV (adjustable in 10 V steps up to 1 kV, 25 V steps above) |
| Maximum Insulation Resistance Measurement | 10 TΩ |
| Short-Circuit Current | 3 mA |
| Display | Backlit LCD with multi-parameter real-time readout (resistance, voltage, leakage current, capacitance, time constant, battery status, elapsed test time) |
| Battery | Rechargeable Li-ion, 6 h continuous operation, 2.5 h full charge |
| Ingress Protection | IP65 |
| Safety Rating | CAT IV 600 V (up to 3000 m altitude) |
| Compliance | IEC 61010-1, IEC 61557-2 |
| Software Compatibility | PowerDB™ analysis software (via USB/RS232) |
| Real-Time Clock & Temperature Logging | Yes |
| Diagnostic Test Modes | IR, IR(t), PI, DAR, DD, SV (Step Voltage), Ramp Test |
| Input Protection | 3 mA noise immunity, ±2% accuracy at 100 MΩ load (500 kΩ leakage protected) |
| Dual-Shell Housing | Outer impact-resistant shell + inner flame-retardant shell |