Electronic Measurement Instruments
Filter
Showing 151–180 of 274 results
| Brand | Megger |
|---|---|
| Model | MIT525 |
| Test Voltage Range | 50 V to 5 kV (5 preset + user-defined) |
| Maximum Resistance Measurement | 10 TΩ |
| Accuracy | ±5% up to 1 TΩ at 5 kV |
| Short-Circuit Current | 3 mA |
| Safety Rating | CAT IV 600 V, Double Insulation |
| Ingress Protection | IP65 (enclosure) |
| Operating Altitude | Up to 3000 m |
| Battery | Rechargeable Li-ion, 6 h continuous operation at 5 kV |
| Charging Time | 1.5 h (full charge) |
| Display | Backlit LCD with multi-parameter readout |
| Data Storage | Internal memory with time/date stamping |
| Interface | Isolated USB-B port for PowerDB software integration |
| Compliance | IEC 61010-1, IEC 61010-2-033, IEC 61010-31:2008, IEEE 43, ASTM D257, BS EN 60204-1 |
| Brand | Megger |
|---|---|
| Origin | USA |
| Model | MOM600A |
| Voltage Options | 115 V AC / 230 V AC |
| Output Current Range | 0–600 A DC |
| Resistance Measurement Range | 0–1999 µΩ |
| Resolution | 1 µΩ |
| Accuracy | ±1% of reading + 1 digit (at 100–600 A) |
| Operating Temperature (115 V) | 0°C to +50°C |
| Operating Temperature (230 V) | 0°C to +40°C |
| Storage Temperature | −40°C to +70°C |
| Humidity | 5–95% RH, non-condensing |
| Dimensions (Instrument) | 356 × 203 × 241 mm |
| Weight (115 V unit) | 25 kg |
| Weight (230 V unit) | 24.7 kg |
| Brand | Megger |
|---|---|
| Origin | United Kingdom |
| Model | TORKEL900/TORKEL910 |
| Maximum Discharge Current | 220 A |
| Operating Modes | Constant Current, Constant Power, Constant Resistance, Programmable Load Profile |
| Integrated Data Logging | Voltage, Capacity, Time |
| Safety Features | Spark-Free Connection, Emergency Fuse, Auto-Discharge Termination, Hardware Emergency Stop |
| Interface | 7" Touchscreen Display, USB Storage Port, Ethernet (Service Only), Isolated TXL Stop Output, Relay Alarm Output, DC 9 V Auxiliary Supply, I_EXT ≤ 1 V External Current Input |
| Compliance | Designed for IEC 61000-4 Immunity, EN 61010-1 Safety, and Compatible with IEEE 450 / IEEE 1188 Maintenance Standards |
| Software Export | CSV via USB flash drive |
| Brand | Megger |
|---|---|
| Origin | United Kingdom |
| Model | VLF CR-60HP |
| Output Voltage | 0–60 kV RMS (VLF), 0–±60 kV DC |
| Frequency | 0.1 Hz |
| Max Capacitive Load | 6.5 µF @ 0.1 Hz / 60 kV RMS |
| Output Current | 0–17 mA (10 µA resolution) |
| Leakage Current Measurement | Integrated |
| Breakdown Detection | Real-time |
| Sheath Fault Location | 0–10 kV, Duty Cycle 1:3 / 1:5 / 1:9 |
| Input | 115 V / 230 V ±10%, 50/60 Hz, 1900 VA |
| Dimensions (W×H×D) | 1350 × 1250 × 1100 mm (1500 mm with rear access panel) |
| Weight | 380 kg |
| IP Rating | IP20 |
| Operating Temperature | –25 °C to +55 °C |
| Storage Temperature | –40 °C to +70 °C |
| Brand | Metrel |
|---|---|
| Origin | Germany |
| Model | MI3210 |
| IP Rating | IP65 |
| Test Voltage Range | 50 V to 10 kV DC |
| Insulation Resistance Range | 10 kΩ to 20 TΩ |
| Short-Circuit Current | 5 mA ±10% |
| Capacitive Load Charging Rate | <3 s/µF at 10 kV |
| Discharge Rate | <0.25 s/µF at 10 kV |
| Display | 320 × 240 backlit LCD |
| Memory | 4 MB internal storage |
| Interfaces | USB, RS232, Bluetooth (115 kbps) |
| Power Supply | Rechargeable lead-acid battery (LC-R123R4PG) and AC adapter |
| Battery Life | Up to 4 h at 10 kV output |
| Dimensions (W×H×D) | 360 × 160 × 330 mm |
| Weight | 6.5 kg |
| Compliance | IEC/EN 61557-2, EN 61326 Class A, EN 61010-1, EN 61010-2-030, EN 61010-2-033, EN 61010-031 |
| Safety Category | CAT IV / 600 V |
| Brand | Microphotons |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | MP-TFF-5-FA |
| Price | Upon Request |
| Brand | Microphotons |
|---|---|
| Origin | Canada |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | OEDCG-100-28 |
| Price | Upon Request |
| Brand | Moglabs |
|---|---|
| Origin | Australia |
| Model | MSA Series ECDL-Based MOPA Laser |
| Wavelength Range | 630–1064 nm |
| Output Power | Up to 4 W (wavelength-dependent) |
| Linewidth | <100 kHz |
| ASE Suppression | >45 dB |
| Small-Signal Gain | Up to 23 dB |
| Seed Input Requirement | 10–30 mW |
| Gain Bandwidth | 10–30 nm (wavelength-dependent) |
| Polarization Extinction Ratio | >20 dB |
| Beam Collimation | Integrated, Linearly Aligned Coupling Lenses |
| Amplifier Module Replaceability | User-Serviceable TA Diode Cartridge |
| Optional Configurations | Dual-Stage Isolator (5 mm aperture), Single-Mode Fiber Coupling, Frequency Stabilization Kit, Power Stabilization Module, Astigmatism-Corrected Output, Dual-Beam (Free-Space + Fiber) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | N9040B UXA X-Series |
| Pricing | Available Upon Request |
| Brand | Novocontrol Technologies |
|---|---|
| Origin | Germany |
| Model | Alpha-A |
| Frequency Range | 3 µHz – 40 MHz (up to 3 GHz with Keysight E4991B RF Impedance Analyzer) |
| Temperature Range | −160 °C to +1600 °C |
| Impedance Range | 10 mΩ to 100 TΩ |
| Measurement Voltage | 10⁻⁶ V to 3 V RMS |
| DC Bias Voltage | ±40 V |
| Sample Compatibility | Solids, thin films, liquids, powders, ceramics, polymers, electrolytes |
| Software | Novocontrol WinDETA v5.x with real-time multi-parameter acquisition (≥30 parameters), audit trail, GLP-compliant reporting |
| Brand | Novocontrol Technologies |
|---|---|
| Origin | Germany |
| Model | Alpha-A |
| Frequency Range | 3 µHz – 40 MHz (up to 3 GHz with Keysight E4991B RF Impedance Analyzer) |
| Temperature Range | −160 °C to +1600 °C |
| Impedance Range | 10 mΩ to 100 TΩ |
| AC Voltage Range | 10⁻⁶ V to 3 V RMS |
| DC Bias Voltage | ±40 V |
| Compliance | ASTM D150, ISO 257-1/2, IEC 60250, USP <1058>, FDA 21 CFR Part 11 (software-enabled audit trail) |
| Brand | Novocontrol Technologies |
|---|---|
| Origin | Germany |
| Model | MKW4200 |
| Frequency Range | 3 µHz – 40 MHz (up to 3 GHz with Keysight E4991B) |
| Temperature Range | −160 °C to +1600 °C |
| Impedance Range | 10 mΩ to 100 TΩ |
| AC Voltage Range | 10⁻⁶ V to 3 V |
| DC Bias Voltage | ±40 V |
| Sample Compatibility | Solids, thin films, liquids, powders, pastes |
| Compliance | ASTM D150, ISO 257-3, IEC 60250, USP <1058>, FDA 21 CFR Part 11 (software audit trail enabled) |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | With Integrated Transimpedance Amplifier |
| Price | Upon Request |
| Active Area | 6 mm² |
| Spectral Range | 200–1800 nm |
| Package | Hermetically Sealed TO-39 |
| NEP (λ=940 nm) | 1.2 fW/√Hz |
| Dark Bias Noise (0.1–135 kHz, ±5 V) | 283–500 µV rms |
| Sensitivity (λ=940 nm, ±5 V) | 275–315 V/µW |
| Bandwidth (−3 dB, ±5 V) | 100–130 Hz |
| Supply Current | 850–950 µA |
| Supply Voltage Range (±V) | 5–15 V |
| Operating Temperature | −25 to +100 °C |
| Brand | Optogama |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic (PRC-manufactured) |
| Model | LPA-M |
| Wavelength Range | 240–2000 nm |
| Design Wavelength | 1064 nm (customizable) |
| Clear Aperture | 8 mm |
| Attenuation Range | 0.1–98% |
| Laser-Induced Damage Threshold (LIDT) | 10 J/cm² (10 ns pulse @ 1064 nm) |
| Adjustment | Manual (precision micrometer-driven rotation) |
| Resolution | < 0.1% |
| Dimensions | 57 × 72 × 105 mm |
| Optical Architecture | Polarization-based, dual-rotating waveplate design |
| Brand | auniontech (distributor) |
|---|---|
| Origin | Switzerland |
| Product Type | Transmissive Laser Speckle Reducer |
| Core Technology | Electromagnetically Driven Resonant Scattering Element |
| Clear Aperture | 18.5 × 18.5 mm |
| Diffuser Material Compatibility | Glass or Polycarbonate |
| Transmission Efficiency | Up to 98% |
| Oscillation Mode | 1D Linear |
| Peak Oscillation Amplitude | 800 µm |
| Resonant Frequency | ~120 Hz (load-dependent) |
| Drive Voltage | 5 VDC (pulsed coil current) |
| Mass | 11 g |
| Operational Lifetime | >40,000 hours |
| Environmental Robustness | Industrial-grade mechanical housing, flexible cable-integrated driver electronics |
| Compliance | Designed for integration into ISO/IEC 61000-6-3-compliant optical subsystems |
| Brand | OROS |
|---|---|
| Origin | France |
| Model | O4 |
| Input Channels | 4 analog (±40 V), 2 tachometer, 1 analog output |
| Phase Accuracy | ±0.02° |
| Amplitude Accuracy | ±0.02 dB |
| Dynamic Range | 140 dB |
| Max Sampling Rate | 256 kHz |
| Oversampling Rate | 32.8 MHz |
| Dimensions | 185 × 110 × 35 mm |
| Weight | 534 g |
| Interface | USB Type-C (bus-powered) |
| Compliance | ISO 9001:2015 certified design and manufacturing |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Other Test Accessories |
| Pricing | Upon Request |
| Brand | TEO |
|---|---|
| Origin | Israel |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | PPKTP |
| Pricing | Available Upon Request |
| Brand | Pico Technology |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | EP077 |
| Instrument Type | Handheld Oscilloscope-Compatible Pressure Transducer |
| Pressure Ranges | 0–500 psi / –15 to +50 psi / –5 to +5 psi |
| Response Time | 100 µs (0–90% FS) |
| Resolution | ~0.07 psi (5 mbar) |
| Power Source | Rechargeable Internal Li-ion Battery |
| Features | Auto-zero, Integrated Pressure Relief Valve, High Noise Immunity, Temperature Compensation, Signal Amplification Capability |
| Brand | Pico Technology |
|---|---|
| Origin | United Kingdom |
| Instrument Type | Digital Storage Oscilloscope |
| Model | EP031 |
| Channels | 2 |
| Bandwidth | 20 MHz (10 MHz at ±50 mV range) |
| Vertical Resolution | 12-bit |
| Sampling Rate | 200 MS/s (dual-channel) |
| Memory Depth | 250 M samples |
| Input Range | ±50 mV to ±200 V across 12 ranges |
| Input Impedance | 1 MΩ |
| Input Coupling | Software-selectable AC/DC |
| Overvoltage Protection | ±250 V (DC + AC peak) per input |
| Timebase Range | 100 ns/div to 5000 s/div |
| Protocol Decoding | CAN, CAN FD, LIN, FlexRay, SENT |
| Math Channels | Built-in RPM, frequency, and custom arithmetic functions |
| Probe Auto-Detection & Auto-Ranging | Yes |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM 1000 |
| Processor | Motorola DSP56002 & Intel 80C186/187 |
| Input Resolution | 18-bit per channel |
| ADC Interface | IEEE-488 (GPIB) |
| Self-test | On power-up |
| Power Supply | 180–250 VAC / 90–125 VAC, 50–60 Hz |
| Max Power Consumption | 40 W |
| Dimensions | 460 × 448 × 132 mm |
| Weight | 12 kg |
| Operating Temperature | 0–50 °C |
| Storage Temperature | −20–80 °C |
| Storage Humidity | ≤92% RH, non-condensing |
| Software Platform | Windows-based |
| Harmonic Standards Compliance | IEC 61000-3-2, IEC 61000-3-4, IEC 61000-4-7, IEC 555-2 |
| Flicker Standards Compliance | IEC 61000-3-3 (replaces IEC 1000-3-3), IEC 60468 (Amend. 1), IEC 60555-3 (Amend. 1), IEC 60868 (Amend. 1) |
| Voltage Input Range | 90–300 Vrms (flicker: 40–504 Vrms) |
| Current Input Range | 5 mA–16 A (shunt ranges: 0.16 / 0.8 / 4 / 20 A) |
| Voltage Channel Input Impedance | >8 MΩ |
| Current Channel Impedance | <3.03 mΩ (max range) |
| Max Potential Difference | 150 mV |
| Accuracy | Better than ±0.2% for harmonics |
| Anti-aliasing Filter Attenuation | 70 dB |
| Transient Harmonic Smoothing | Low-pass filter, 1° phase shift (1.5 s period) |
| Measurement Modes | Single-shot, time-limited, continuous |
| Data Storage | Ring-buffer architecture retaining last 2.5 minutes of continuous measurement |
| FFT Points | 2048 |
| Frequency Range | 45–65 Hz (extendable to 16–2500 Hz) |
| Flicker Metrics | Pst, Plt, Pmax, P50%, P10%, P3%, P1%, P0.1%, CPF, d(t), dmax, dc |
| Voltage Fluctuation Resolution | ±2% error for d(t) and dmax |
| AC Power Supply Options | TPS 1500 (1-phase, 1.5 kVA), TPS-K10 (3-phase, 10 kVA), TPS-K20 (3-phase, 20 kVA) |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PMM 1008 |
| Quotation | Upon Request |
| Compliance | IEC 61000-4-8, EN 61000-4-8, EU EMC Directive 2014/30/EU (replacing 89/336/EEC), Low Voltage Directive 2014/35/EU (replacing 73/23/EEC) |
| Generator Output | Continuous up to 160 A / Transient up to 1200 A |
| Magnetic Field Levels | Continuous — Class 1 (1 A/m) to Class 5 (100 A/m), Custom |
| Open-Circuit Voltage | ≤4 V |
| Coil Dimensions | 1035 mm × 1035 mm × 35 mm (square loop) |
| Antenna Factor | 0.87 |
| Inductance | ~0.6 µH |
| DC Resistance | 670 µΩ |
| Height Adjustment Range | 0–2000 mm |
| Weight (Net) | 28 kg |
| Dimensions (W×H×D) | 385 × 400 × 215 mm |
| Power Supply | AC 198–264 V, 50/60 Hz |
| Communication Interface | RS-232 / RS-485 (DB9) |
| Safety Features | Thermal cutoff, magnetic overcurrent protection, safety interlock port, fanless design |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM 1008 |
| Generator Output | 160 A (continuous), 1200 A (transient) |
| Continuous Field Levels | 1–100 A/m (IEC/EN 61000-4-8 Classes 1–5) |
| Transient Field Levels | 300–1000 A/m |
| Coil Dimensions | 1.035 m × 1.035 m × 35 mm |
| Antenna Factor | 0.87 |
| Coil Inductance | ~0.6 µH |
| Coil Resistance | 670 µΩ |
| Generator Dimensions (W×D×H) | 385 × 215 × 400 mm |
| Generator Weight | 28 kg |
| Coil + Trolley + Stand Total Weight | 50 kg |
| Power Supply | 198–264 V AC, 50/60 Hz |
| Interface | RS232/RS485 (DB9) |
| Safety | Interlock-enabled, thermal cutoff, ≤4 Vrms open-circuit voltage |
| Compliance | IEC/EN 61000-4-8, EU Directives 89/336/EEC & 73/23/EEC |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM 3010 / PMM 3030 |
| Frequency Range | 9 kHz – 1 GHz (3010) / 9 kHz – 3 GHz (3030) |
| Output Level | −107 dBm to +10 dBm |
| Modulation | Internal AM & Pulse Modulation |
| Interface | RS232, USB, User I/O Port |
| Power Supply | Internal Rechargeable Li-ion Battery (PMM 3030-2), AC Adapter |
| Compliance | IEC 61000-4-3, IEC 61000-4-6 |
| Sweep Mode | Yes |
| Programmable | Yes |
| Correction Table Support | Yes |
| Frequency Range | 9 kHz–1 GHz (PMM 3010) / 9 kHz–3 GHz (PMM 3030) |
|---|---|
| Output Level | –107 to +10 dBm |
| Level Resolution | 0.1 dB |
| Level Accuracy | ±1 dB (for levels > –30 dBm) |
| Frequency Resolution | 1 kHz |
| Frequency Accuracy | ±10 ppm |
| AM Modulation (Internal) | 2–400 Hz & 1 kHz, 10–90% depth |
| Pulse Modulation (Internal) | 1 Hz & 200 Hz, ON/OFF ratio >40 dB @ 0 dBm |
| Harmonics | < –30 dBc @ 0 dBm, f > 1 MHz |
| Output Impedance | 50 Ω |
| Interface | RS-232, USB 2.0, User I/O port (RF ON/OFF, Start/Stop) |
| Display | 340 × 240 pixels, 16 gray levels |
| Power Supply | DC 10–15 V / AC adapter (115–230 V, 50/60 Hz) |
| Optional Li-ion Battery (PMM 3030-02 only) | ~3 h runtime |
| Dimensions (W×H×D) | 235 × 105 × 335 mm |
| Compliance | IEC 61000-4-3, IEC 61000-4-6 |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | 6000A |
| RF Signal Source | PMM 3010 |
| Power Amplifier Options | PMM 5042 or 7034 |
| Power Meter | PMM 6630 |
| Current Injection Clamp | OIP400 |
| Injection Current Capability | 200 mA, 300 mA, and 400 mA (peak) |
| Software | PIMS (Programmable Immunity Measurement System) |
| Hardware Architecture | Decentralized modular design |
| Instrument Interoperability | Compatible with R&S SMB100 series signal sources and third-party amplifiers/clamps per ISO 11452-4 |
| Compliance | Designed for ISO 11452-4, ISO 10605, SAE J1113/4, and CISPR 25 immunity validation |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | 6000C |
| Compliance Standards | IEC 61000-4-6, GB/T 17626.6 |
| Calibration Levels | 1 V, 3 V, and 10 V (per IEC 61000-4-6 Annex A) |
| Core Components | PMM 3010 RF Signal Generator, PMM 6000N/5048FE Power Amplifier, M3-16 Coupling/Decoupling Network (CDN), ATT-25W Attenuator, SW-06 Control & Calibration Software, Cab-06 Interconnection Cables |
| Optional Accessories | M-, AF-, S-, and T-type CDNs |
| Amplifier Upgrade Range | 15 W to 10,000 W |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | 6000R |
| Pricing | Available Upon Request |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | PMM 6000S/10 |
| Price | Upon Request |
| RF Signal Generator | PMM 3010 |
| Power Amplifier | PMM 6000N (10/15 W, optional 40/80/100 W) |
| Power Meter | PMM 6600 or 6600D, Boonton 4220/4230/9200 |
| Coupling Devices | M3-16 (220 V / 16 A CDN), M3-32, M4-32, M5-32, CDN-S, CDN-F, CDN-T series |
| Probes | F-120-9A Absorbing Probe, F-33 Current Probe, F-203I-23 Absorbing Clamp |
| Attenuators | ATT-25W (6 dB, 25 W), ATT-30W (6 dB, 30 W) |
| Software | SW-06 Immunity Control & Calibration Suite |
| Frequency Range | 100 Hz – 1000 MHz |
| Test Level Range | 1–100 V (0.01 V resolution) |
| Modulation | AM (400 Hz–1 kHz internal/external), Pulse (1 Hz / 200 Hz), Depth: 1–100% |
| Dwell Time | 100 ms – 10 s |
| Calibration Support | Automatic CDN/probe/clamp calibration with traceable correction factors |
| Compliance Standards | IEC/EN 61000-4-6, IEC/EN 61000-4-3, MIL-STD-461G RS103, DO-160 Section 20, ISO 11452-4/2013 |
| Key | Frequency Range: 9 kHz–3 GHz (6600/6600D: up to 1 GHz) |
|---|---|
| Input Power Range | 100 nW–1 W (−40 dBm to +30 dBm) |
| Linearity | ±0.2 dB (typ.) |
| Measurement Modes | Forward & Reverse Power |
| Detection | True RMS, >70 dB dynamic range |
| Interface | USB 1.0/1.1/2.0 (6600/6600D: proprietary 486-style interface) |
| Units | dBm, W, Vrms |
| Compliance | CE, RoHS |