Environmental Test Chamber
Filter
Showing 781–810 of 2010 results
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (FOB) |
| Temperature Range | 105–132 °C (Control Point) |
| Temp. Uniformity | ±2.0 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Control Point | 100 % RH |
| Humidity Stability | ±2.5 % RH |
| Humidity Uniformity | ±5.0 % RH |
| Pressure Range | 0.05–0.196 MPa (0.5–2 kgf/cm²) |
| Heating Time | 35 min (RT → 132 °C) |
| Pressurization Time | 40 min (Ambient → 0.196 MPa) |
| PID Temperature Control Accuracy | ±0.1 °C |
| Safety Features | Dual Overheat Protection, Interlocked Door Switch, Mechanical Safety Valve, Auto-Water Replenishment, Saturated Steam Purge System |
| Construction | ABS Insulated Door, Integrated Silicone Gasket, Stainless Steel Chamber |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 2,650 (FOB) |
| Temperature Range | −40°C to +150°C |
| Humidity Range | 20%–98% RH |
| Control Accuracy | ±0.5°C / ±2.5% RH |
| Uniformity | ±1.5°C / ±3% RH |
| Ramp Rate (Typical) | 3–5°C/min (air average, unloaded, 25°C ambient) |
| Cooling Water Requirement | 10–28°C, 0.1–0.3 MPa |
| Refrigerant | R404A (CFC-free) |
| Compressor | Tecumseh/Taikang hermetic scroll type |
| Noise Level | <60 dB(A) |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, IEC 60068-2-1:2022, IEC 60068-2-2:2022, GJB 1032A–2021, MIL-STD-2164A–2018 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Controller Options | TEMI880 Color Touchscreen (EN/CN Switchable) or TEMI300 Membrane Keypad (English Only) |
| Protection Systems | Compressor Overheat/Overcurrent/High-Pressure, Dry-Heater Burnout Prevention, Chamber Over-Temperature, Low-Water Detection |
| Standard Features | Dual-Layer Tempered Glass Viewing Window, φ50 mm Cable Port (Left Side), Two Adjustable Sample Racks, Fluorescent Interior Lighting, Four Casters with Brakes, Removable Humidity Water Tank, RS485/RS232 Communication Interface, PC-Based Control Software |
| Temperature Control | Balanced Temperature & Humidity Control System (BTSC) |
| Operating Ambient | +5°C to +35°C |
| Heating | Nickel-Chromium Alloy Wire Heaters |
| Humidification | Surface Evaporation Type |
| Air Circulation | Wide-Range Forced Convection (Top-Down Flow), Multi-Blade Centrifugal Fan |
| Condensation | Air-Cooled |
| Refrigeration | Original French Tecumseh Hermetic Compressor |
| Refrigeration Circuit | Twin-Stage or Single-Stage Low-Temperature Loop Design |
| Construction | Outer Shell – SUS304B Stainless Steel |
| Airflow Uniformity | ±0.5°C Temp Deviation Across Working Volume (per IEC 60068-3-5) |
| Recovery Time | ≤3 min After Door Opening (from −40°C to +85°C at 50% RH) |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (FOB) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| Temperature Range (Hot Zone) | RT to +200 °C |
| Temperature Range (Cold Zone) | RT to −70 °C |
| Test Zone Range | +60 °C to +150 °C (hot shock) |
| Switching Mechanism | Pneumatic air-door, static sample placement |
| Recovery Time | <5 min |
| Temperature Uniformity | ±2.0 °C |
| Control Accuracy | ±0.5 °C |
| Refrigeration | Dual-stage cascade system with semi-hermetic compressors (R404A/R23) |
| Insulation | High-density fire-retardant PU foam |
| Interior Material | SUS#304 mirror-finish stainless steel |
| Exterior Material | SUS#304 stainless steel or powder-coated steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| Temperature Range | High Zone: RT to +200°C |
| Low Zone | RT to −70°C |
| Test Zone | +60°C to +150°C (hot shock), 0°C to −65°C (cold shock) |
| Transfer Mechanism | Pneumatic air-door switching (stationary test specimen) |
| Recovery Time | <5 min |
| Temperature Uniformity | ±2.0°C |
| Control Accuracy | ±0.5°C |
| Refrigeration | Dual-stage cascade system with semi-hermetic German compressors |
| Refrigerant | R404A/R23 |
| Insulation | High-density fire-retardant PU foam |
| Interior Material | Mirror-finish SUS304 stainless steel |
| Exterior | SUS304 or powder-coated steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| Temperature Range | High Zone: RT to +200 °C |
| Low Zone | RT to −70 °C |
| Test Zone | +60 °C to +150 °C (hot shock) |
| Switching Method | Pneumatic damper–actuated air valve |
| Recovery Time | <5 min |
| Temp. Uniformity | ±2.0 °C |
| Temp. Control Accuracy | ±0.5 °C |
| Refrigeration | Dual-stage cascade system with semi-hermetic compressors (R404A/R23) |
| Construction | Interior—SUS304 mirror-finish stainless steel |
| Insulation | High-density fire-retardant PU foam |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| [Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General distributor |
| Price | USD 12,500 (approx.) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| External Dimensions (W×H×D) | 145×180×140 cm to 190×170×270 cm |
| High-Temperature Storage Range | RT to +200°C |
| Low-Temperature Storage Range | RT to –70°C |
| Test Zone Temperature Range | Hot Shock (+60°C to +150°C) |
| Switching Mechanism | Pneumatic damper actuation with stationary test specimen |
| Preheating Time (RT → 150°C) | ~30 min |
| Precooling Time (RT → –70°C) | ~85 min |
| Temperature Recovery Time | <5 min |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Uniformity | ±2.0°C |
| Refrigeration System | Dual-stage cascade refrigeration with semi-hermetic compressors (R404A/R23) |
| Inner Chamber Material | SUS#304 mirror-finish stainless steel |
| Outer Chamber Material | SUS#304 stainless steel or powder-coated steel |
| Insulation | High-density fire-retardant PU foam |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire] |
| Temperature Range | –40 °C to +150 °C (optional down to –120 °C) |
|---|---|
| Humidity Range | 30–98% RH (optional 5–98% RH) |
| Temperature Resolution | 0.01 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤ ±2 °C |
| Humidity Resolution | 0.1% RH |
| Humidity Deviation | ≤ ±2.5% RH |
| Cooling Rate | 0.7–1.0 °C/min |
| Heating Rate | 2.0–3.0 °C/min |
| Control System | TEMI880 Color LCD Touchscreen Programmable Controller |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G (220 V optional) |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | SUS304 Stainless Steel or A3 Steel with Electrostatic Powder Coating |
| Brand | OEM (Custom-Branded) |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Brand | Custom OEM / Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Capacity | 80 L |
| Internal Dimensions (H×W×D) | 400 × 500 × 400 mm |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±0.5 °C |
| Heating System | Nickel-Chromium Alloy Wire Heater |
| Cooling System | Hermetic Compressor (Tecumseh or equivalent), Eco-Friendly Refrigerant |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Interior Material | Mirror-Finish Stainless Steel (SUS304) |
| Exterior Material | Powder-Coated Steel or Stainless Steel |
| Air Circulation | Centrifugal Blower |
| Temperature Sensor | PT100 Dry-Bulb Sensor |
| Control Mode | Balanced Temperature Control (BTC) |
| Ramp Rate | Linear, −70 °C ↔ +150 °C in <90 min |
| Ambient Operating Condition | +5 °C to +35 °C |
| Power Supply | 2Φ 3W 220 VAC ±10% |
| Safety Protections | Compressor Overheat/Overcurrent/High-Pressure, Heater Dry-Burn Prevention, Chamber Over-Temperature Cut-off |
| Brand | OEM / Generic |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Temperature Range | -70°C to +180°C |
| Ramp Rate | Up to 15°C/min (linear, load-dependent) |
| Uniformity | ±0.5°C |
| Stability | ±0.3°C |
| Control Resolution | 0.01°C |
| Humidity Range (if equipped) | 20–98% RH |
| Compliance | GB/T 5170.2, GB/T 5170.5, GB/T 2423.1–2423.4, GB/T 2423.22, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Brand | Generic OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Standards Compliance | GB 10589-89, GB 10592-89, GB 10586-89, GB 11158-89, GB/T 5170.2–1996, GB/T 5170.5–1996 |
| Construction | SUS304 brushed stainless steel exterior or Baosteel cold-rolled steel with electrostatic powder coating |
| Insulation | Rigid polyurethane foam + ultra-fine glass wool |
| Air Circulation | Dual-axis adjustable centrifugal blower with horizontal/vertical louver system |
| Control System | PID-based programmable temperature controller with linear ramp profiling |
| Cooling | Capillary tube-based auto-load capacity regulation |
| Heating | Stainless steel sheathed resistive elements |
| Viewing Window | Reinforced double-glazed observation port with LED illumination |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,800–3,200 (FOB) |
| Temperature Range | –40 °C to +150 °C (standard) |
| Humidity Range | 30–98 % RH (standard) |
| Temp. Resolution | 0.01 °C |
| Humidity Resolution | 0.1 % RH |
| Temp. Uniformity | ±0.5 °C |
| Temp. Deviation | ≤ ±2 °C |
| Humidity Deviation | ≤ ±2.5 % RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control System | TEMI880 color LCD touchscreen controller with programmable ramp-soak profiles |
| Power Supply | 380 V ±5 %, 50 Hz, 3P+N+G (custom 220 V available) |
| Interior Material | SUS304 stainless steel |
| Exterior Material | SUS304 stainless steel or A3 steel with epoxy powder coating |
| Compliance | GB10589, GB10592, GB11158, GB/T5170.2, GB/T5170.5, GB2423.1, GB2423.2, GB2423.22, GB2424.1 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Range | USD 13,500–14,800 (FOB) |
| Control System | Siemens S7-1200 PLC + 10.1″ Color TFT Touchscreen HMI |
| Temperature Setpoint Accuracy | ±0.1 °C |
| Temperature Indication Accuracy | ±0.1 °C |
| Sensor | PT100 Class A Platinum Resistance Thermometer (DIN EN 60751) |
| Heating | Independent Nickel-Chromium Alloy Heaters (PID-controlled) |
| Refrigeration | Dual-stage Cascade Refrigeration System with Tecumseh/Tecumseh-derived Hermetic Compressors |
| Air Circulation | Low-Noise, High-Torque AC Inverter-Driven Motor + Multi-Blade Centrifugal Impeller |
| Internal Dimensions | 600 × 500 × 500 mm (W×H×D) |
| External Dimensions | 1500 × 2100 × 2250 mm (W×H×D) |
| Chamber Construction | AISI 304 Stainless Steel (Interior & Exterior), Matte-Finish Surface |
| Insulation | 120 mm Thickness — Hybrid Layer of High-Density Mineral Wool + Rigid Polyurethane (PU) Foam (λ ≤ 0.022 W/m·K) |
| Door Sealing | Dual-Lip High-Tensile Silicone Packing (Rated for −200 °C to +400 °C) |
| Transition Mechanism | Pneumatic Actuated Dual-Zone Partition with Active Thermal Isolation Valves |
| Sample Zone Configuration | Static Single-Chamber Mode or Dynamic Two-Zone Switching Mode |
| Recovery Time (from −20 °C to +85 °C) | ≤ 3.5 min (per IEC 60068-3-5) |
| Linear Ramp Rate | Up to 15 °C/min (programmable, load-dependent) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Range | -70°C to +150°C |
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ≤ ±2°C |
| Temp. Stability | ≤ ±0.5°C |
| Humidity Deviation | +2 / -3% RH |
| Control System | TEMI880 Touchscreen Controller (Korea) |
| Heating | Ni-Cr Alloy Heaters |
| Cooling | French Tecumseh Hermetic Compressor |
| Fluid Medium | Silicone Oil / Glycol / Water / Special Coolant |
| Sample Transfer Time | ≤10 s |
| Chamber Interior | SUS304 Stainless Steel |
| Insulation | Polyurethane Rigid Foam + Ultra-Fine Glass Fiber |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,600 (FOB) |
| Internal Chamber Dimensions | 80 × 80 × 80 cm or 100 × 100 × 100 cm |
| Spray Ring Radius | 400 mm |
| Spray Pipe Diameter | φ16 mm |
| Nozzle Orifice Diameter | 0.4 mm |
| Nozzle Spacing | 50 mm |
| Oscillating Arm Range | ±60°, ±90°, ±160° |
| Turntable Speed | 1 rpm (standard), variable-speed option available |
| Rain Duration | Adjustable up to 15 min |
| Intermittent Interval | Adjustable up to 30 min |
| Rainfall Intensity | Up to 150 mm/h (adjustable) |
| Viewing Window | Large-area tempered glass door |
| Construction Material | Mirror-finish SUS304 stainless steel (inner & outer chamber, turntable) |
| Safety Protections | Leakage protection, short-circuit protection, motor overload protection |
| Power Supply | 1Φ3W AC220V±10% 50/60 Hz or 3Φ5W AC380V±10% 50/60 Hz |
| Compliant Standards | GB/T 10485–2007, GB/T 4208–2008, GB/T 4942.2–1993 |
| Brand | OEM / Third-party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Chamber Dimensions (W×D×H) | 1000 × 1000 × 1000 mm |
| Operating Temperature Range | +5 to +36 °C |
| Max Relative Humidity | ≤85 %RH |
| Nozzle Quantity | 25 |
| Nozzle Diameter | 0.4 mm |
| Nozzle Spacing | 50 mm |
| Spray Arm Radius | 375 mm |
| Spray Arm Inner Diameter | 16 mm |
| Oscillation Angle | Adjustable from ±45° to ±90° (180° total sweep) |
| Oscillation Speed | 60°/s (variable via frequency inverter) |
| Construction | Cold-rolled steel exterior with powder coating |
| Sealing | Dual-layer silicone rubber gasket with rotary waterproof joint |
| Viewing Window | Reinforced organic glass with integrated wiper and LED lighting |
| Brand | Alphavita |
|---|---|
| Model | MDF-540DH |
| Temperature Range | –20 °C to –40 °C |
| External Dimensions (W×D×H) | 793 × 770 × 1806 mm |
| Internal Dimensions (W×D×H) | 649 × 614 × 600 mm × 2 |
| Total Net Volume | 548 L |
| Net Weight | 175 kg |
| Rated Input Power | 491 W |
| Refrigerant | Hydrocarbon (R290/R600a) |
| Control Interface | Microprocessor-based digital controller with non-volatile memory |
| Communication | Standard RS485 port, optional USB data export |
| Safety | Dual-key locking system (integrated key lock + provision for auxiliary padlock) |
| Construction | Powder-coated steel interior and exterior panels |
| Cooling System | Direct-cooling evaporator coils embedded in inner cabinet walls |
| Shelf Configuration | Adjustable-height wire shelving per compartment |
| Brand | OK Instruments |
|---|---|
| Model Series | OK-TH-80 to OK-TH-1000 |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Temperature Range Options | 0–150°C / −20–150°C / −40–150°C / −70–150°C |
| Humidity Range | 20–98% RH (optional: 5–98% RH or 10–98% RH) |
| Temperature Uniformity | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Temperature Stability | ±2°C |
| Humidity Stability | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Refrigeration System | Hermetically sealed, low-noise, dual-stage compressor with eco-friendly refrigerants R404A/R23 |
| Control Interface | LCD touch screen controller with bilingual (English/Chinese) display |
| Construction Material | SUS#304 stainless steel interior and exterior |
| Standard Accessories | One Φ50 mm cable port |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire, 2.5 m cable |
| Compliance Standards | MIL-STD-810G (Method 501.6, 502.6), IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-78 (Steady-State Damp Heat), IEC 60068-2-30 (Cyclic Damp Heat), GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.4–1993, GJB 150.3–1986, GJB 150.4–1986 |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | CTC256 |
| Instrument Type | Upright Chamber |
| Temperature Range (with humidity control) | +10 °C to +95 °C |
| Temperature Range (dry operation) | −42 °C to +190 °C |
| Humidity Range | 10–98 %RH |
| Temperature Uniformity | ±0.5 K to ±2 K |
| Temperature Stability | ±0.5 °C |
| Internal Volume | 256 L |
| Internal Dimensions (W×H×D) | 640 × 670 × 597 mm |
| External Dimensions (W×H×D) | 898 × 1730 × 1100 mm |
| Power Supply | 400 V, 3-phase, 50 Hz |
| Rated Power | ~7,000 W |
| Net Weight | ~362 kg |
| Compliance Certificates | Factory Calibration at −20 °C to +160 °C |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HCP108 |
| Instrument Type | Upright Environmental Test Chamber |
| Internal Volume | ~108 L |
| Interior Dimensions (W×H×D) | 560 × 480 × 400 mm |
| Exterior Dimensions (W×H×D) | 710 × 778 × 550 mm |
| Interior Material | Electropolished Stainless Steel (Deep-Drawn) |
| Exterior Material | Stainless Steel Body with Galvanized Steel Rear Panel |
| Temperature Range (without humidity control) | 20–160 °C |
| Temperature Range (with humidity control) | 20–90 °C |
| Temperature Uniformity (per DIN 12880 at 50 °C) | ≤ ±0.3 °C |
| Temperature Stability (per DIN 12880 at 50 °C) | ≤ ±0.15 °C |
| Humidity Range | 20–95 % RH (capacitive sensor, sterilizable) |
| Humidity Control | Microprocessor-driven steam generation + desiccant-based dehumidification |
| Power Supply | 230 V / 50–60 Hz |
| Max. Power Consumption | ~1000 W |
| Net Weight | ~70 kg |
| Gross Weight | ~78 kg |
| Standard Accessories | 2 stainless steel sliding shelves (556 × 361 mm), factory calibration certificate (60 °C center point), Celsius 2005 software (standard), internal memory card (1024 KB ring buffer, ~3 months @ 1-min interval) |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HCP153 |
| Instrument Type | Upright Environmental Test Chamber |
| Internal Volume | ~153 L |
| Chamber Dimensions (W×H×D) | 480 × 640 × 500 mm |
| External Dimensions (W×H×D) | 630 × 938 × 650 mm |
| Interior Material | Electropolished Stainless Steel (Deep-Drawn) |
| Exterior Material | Stainless Steel Front, Galvanized Steel Rear |
| Temperature Range (without humidity control) | 20–160 °C |
| Temperature Uniformity (per DIN 12880 at 50 °C) | ≤ ±0.3 K |
| Temperature Stability (per DIN 12880 at 50 °C) | ≤ ±0.15 K |
| Humidity Range | 20–95 % RH (capable of steam-based humidification and condensation-controlled dehumidification) |
| Humidity Sensor | Sterilizable Capacitive RH Sensor |
| Control System | Microprocessor-Based Fuzzy Logic Controller with Dual Pt100 A-Class (4-wire) Temperature Sensors |
| Data Logging | Built-in 1024 KB Circular Memory (≈3 months @ 1-min interval) |
| Communication Interfaces | Standard RS232, Optional RS485 / Ethernet / USB |
| Software | Celsius 2005 (standard), Celsius FDA Edition (21 CFR Part 11 compliant, optional) |
| Safety Systems | Triple Independent Temperature Protection (Mechanical TB, Electronic TWW, ASF Auto-Safety Function), Audible/Visual Alarms for Over-/Under-Temperature, Over-/Under-Humidity, Door Open, Empty Water Reservoir |
| Programmability | Up to 40-step time-temperature-humidity profiles via controller or MemoryCard XL |
| Certification | Factory Calibration Certificate (60 °C center point), Optional IQ/OQ Documentation Packages (DIN 12880, DIN 12900-1), STERICard for 160 °C Sterilization Cycle (4 h) |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HCP246 |
| Chamber Type | Upright |
| Internal Volume | 246 L |
| Internal Dimensions (W×H×D) | 640 × 640 × 600 mm |
| External Dimensions (W×H×D) | 790 × 938 × 750 mm |
| Construction | Electropolished Stainless Steel Interior, Galvanized Steel Exterior |
| Temperature Range (without humidity control) | 20–160 °C |
| Temperature Uniformity (per DIN 12880, at 50 °C) | ≤ ±0.3 °C |
| Temperature Stability (per DIN 12880, at 50 °C) | ≤ ±0.15 °C |
| Humidity Range | 20–95 % RH (capable of sterilization at 160 °C) |
| Humidity Sensor | Sterilizable capacitive sensor |
| Control System | Microprocessor-based dual-loop PID controller with integrated diagnostics |
| Calibration | 3-point temperature & 2-point humidity calibration via front panel |
| Data Logging | 1024 KB circular memory (≈3 months @ 1-min interval) |
| Compliance | DIN 12880, DIN 12900-1, FDA 21 CFR Part 11 (with optional Celsius FDA Edition software), GLP/GMP-ready architecture |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HPP110 |
| Instrument Type | Upright Climate Chamber |
| Internal Volume | 108 L |
| External Dimensions (W×H×D) | 710 × 760 × 620 mm (excluding handle) |
| Internal Dimensions (W×H×D) | 560 × 480 × 400 mm |
| Standard Shelving | 2 adjustable perforated stainless steel shelves |
| Temperature Range (with illumination) | 10–40 °C |
| Temperature Range (without illumination) | 0–70 °C |
| Temperature Uniformity (per DIN 12 880 | 2007-05): ≤ ±0.4 °C at 10 °C and 37 °C |
| Temperature Stability (per DIN 12 880 | 2007-05): ≤ ±0.1 °C over time |
| Humidity Range | 10–90 %RH (10–85 %RH with illumination active) |
| Humidity Control | Capacitive sensor + microprocessor-controlled humidification/dehumidification via distilled water recirculation pump and thermally blocked bacterial barrier |
| Illumination | Dual-mode tunable LED lighting — Mode 1: Cool white (5500 K), Mode 2: Mixed cool + warm white (2700 K) |
| Max irradiance | 10,000 lux at 10 cm distance |
| Temperature & Humidity Monitoring | PT100 Class A four-wire sensor (redundant fault detection), capacitive RH sensor with auto-diagnostic system |
| Safety Systems | Triple-level overtemperature protection (including Pt100-based monitoring per Protection Class 3.3), ASF (Automatic Safety Function), relay-based heater cutoff, audible/visual alarms for T/RH deviation, empty water tank, or sensor failure |
| Data Logging | Internal 1024 KB memory |
| Programming | Up to 40-stage weekly program (MEMoryCard XL compatible) |
| Connectivity | Parallel port for PCL3-compatible inkjet printers (USB via optional converter) |
| Calibration | On-device 3-point temperature / 2-point humidity calibration (20 %RH, 90 %RH) |
| Display Language Options | German, English, Spanish, French, Italian |
| Power Supply | 230 V ±10 %, 50/60 Hz |
| Max Power Consumption (heating/cooling + lighting) | 400 W |
| Net Weight | 66 kg |
| Environmental Technology | Thermoelectric (Peltier) cooling, LED illumination — zero refrigerants, low heat load, high energy efficiency |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HPP260 |
| Instrument Type | Upright Environmental Test Chamber |
| Internal Volume | 256 L |
| Internal Dimensions (W×H×D) | 640 × 800 × 500 mm |
| External Dimensions (W×H×D) | 824 × 1186 × 774 mm |
| Weight (Net/Gross) | 103 / 121 kg |
| Temperature Range (Dark) | 0–70 °C |
| Temperature Range (Illuminated) | 10–40 °C |
| Temperature Setpoint Accuracy | ±0.1 K |
| Humidity Range (Dark) | 10–90 %RH |
| Humidity Range (Illuminated) | 10–85 %RH |
| Humidity Setpoint Accuracy | ±1 %RH |
| Standard Shelves | 2 pcs (Max. 9) |
| Construction | AISI 304 Stainless Steel (1.4301) Interior |
| Cooling Technology | Peltier-based Thermoelectric System |
| Compliance | ICH Q1A(R3), RoHS, GLP-ready |