Life Science Instruments
Filter
Showing 2101–2130 of 2783 results
| Brand | Okmetic |
|---|---|
| Origin | Finland |
| Wafer Type | SOI (Silicon-on-Insulator) |
| Substrate Material | Single-Crystal Silicon |
| Structural Configuration | Handle Layer / Buried Oxide (BOX) / Device Layer |
| Available Formats | Prime, Double-Side Polished (DSP), Patterned Device Layer Options |
| Process Compatibility | MEMS, Deep Reactive Ion Etching (DRIE), Anodic Bonding, Wafer-Level Sealing |
| Resistivity Range | 0.001–10,000 Ω·cm |
| Device Layer Thickness | 1–50 µm (customizable) |
| BOX Thickness | 0.1–4 µm (customizable) |
| Diameter Options | 100 mm, 150 mm, 200 mm |
| Surface Roughness (Ra) | <0.2 nm (prime/DSP) |
| Brand | Cytiva |
|---|---|
| Origin | Sweden |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | OligoPilot |
| Pricing | Available Upon Request |
| Brand | Olympus |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | CX3-Y-E |
| Instrument Type | Upright Fluorescence Microscope Module |
| Excitation Source | High-Efficiency LED |
| Light Output Options | 3 W / 5 W / 10 W |
| Control Interface | Motorized Digital Control |
| Fluorescence Filter Sets Included | DAPI, GFP, FITC, Cy3, TRITC, mCherry, Cy5 (custom filter sets available) |
| Integration | Dedicated optical coupling for Olympus CX33 series microscopes |
| Regulatory Status | Not a Medical Device |
| Compliance | Designed for research-use-only (RUO) applications in accordance with ISO 13485–informed quality practices for laboratory instrumentation |
| Brand | Aplegen |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Instrument Category | Imported |
| Model | Omega Fluor |
| Instrument Type | Standard Gel Imaging System |
| CCD Resolution | 5.0 Megapixel (Physical Pixels) |
| Bit Depth | 12-bit |
| Lens | Fixed F1.4 Lens |
| Dimensions (W×D×H) | 36 × 32 × 64 cm |
| Safety Feature | UV Interlock — Automatic Power Cutoff Upon Chamber Door Opening |
| Compatible Stains | Ethidium Bromide (EB), Silver Stain, Coomassie Blue |
| Brand | Axion BioSystems |
|---|---|
| Origin | Netherlands |
| Manufacturer | Axion BioSystems |
| Product Type | Imported Instrument |
| Model | Omni |
| Cell Analysis Speed | Full-plate brightfield/fluorescence scan in ≤10 minutes |
| Brand | Omni |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | OMNI-TH |
| Pricing | Upon Request |
| Motor Power | 125 W |
| Sample Volume Range | 0.03–100 mL |
| Operating Noise Level | <72 dB(A) |
| Speed Range | 5,000–35,000 rpm |
| Probe Options | Disposable Plastic or Reusable Stainless Steel Probes |
| Brand | On-chip |
|---|---|
| Origin | Japan |
| Model | On-chip Droplet Generator |
| Droplet Generation Rate | Up to 1 × 10⁶ droplets/min |
| Droplet Diameter Range | 20–220 µm |
| Chip Configurations | 3 standard microfluidic chip types |
| Emulsion Types | Water-in-Oil (W/O) and Gel-Microdroplet (GMD) |
| Compatibility | On-chip Sort, On-chip Droplet Selector |
| Brand | On-chip |
|---|---|
| Origin | Japan |
| Type | Fully Automated |
| Sorting Speed | 1,000 events/sec |
| Sortable Cell Range | 100 – 10,000,000 cells |
| Minimum Sorting Pressure | 0.3 PSI |
| Droplet Volume | Picoliter-scale |
| Compatible Sheath Fluids | Aqueous buffer or oil |
| Max Particle Diameter | >100 µm |
| On-Chip Integration | Detection, Separation, Recovery |
| Chip Format | Disposable, Single-Use Microfluidic Cartridge |
| Brand | On-chip |
|---|---|
| Origin | Japan |
| Model | On-chip SPiS |
| Separation Method | Fully Automated |
| Maximum Sample Diameter | 200 µm |
| Dispensing Accuracy | >90% |
| Consumable | Disposable Tips |
| Imaging System | Integrated CCD Camera |
| Dilution Capability | On-board Automatic Dilution |
| Brand | ZhiGuang Biotech |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | OptoBot®1000 |
| Type | Fully Automated System |
| Dimensions (W×D×H) | 120 × 65 × 177 cm |
| Net Weight | 500 kg |
| Brand | Otisience |
|---|---|
| Model | AL-02 |
| Vacuum Pump | AP-9925 |
| Max Vacuum | 85 kPa |
| Ultimate Vacuum | >400 kPa |
| Flow Rate | 25 L/min |
| Power | 50 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Weight | 3.1 kg |
| Dimensions (W×H×D) | 230 × 130 × 160 mm |
| Filter Cup Capacity | 300 mL |
| Filter Membrane Diameters | 13 mm, 25 mm, 50 mm |
| Pore Sizes | 0.22 µm, 0.45 µm, 0.8 µm, 1.22 µm |
| Material | Borosilicate Glass (≤200 °C thermal shock resistant) |
| Compatibility | ISO-standard threaded interfaces (e.g., GL45, GL32) |
| Brand | Otseins |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | AF-Series |
| Price Range | USD 140 – 1,400 (FOB Tianjin) |
| Available Diameters | 13 mm, 25 mm, 50 mm |
| Pore Sizes | 0.18 µm, 0.22 µm, 0.45 µm, 0.8 µm, 1.2 µm, 1.22 µm |
| Membrane Materials | Mixed Cellulose Ester (MCE), Polyvinylidene Fluoride (PVDF) |
| Hydrophilic/Hydrophobic Variants | Water-compatible (hydrophilic) and solvent-compatible (low-protein-binding hydrophobic) grades |
| Sterilization Compatibility | Gamma irradiation and autoclave (121°C, 20 min) validated for selected configurations |
| Packaging | Individually wrapped in double-layer medical-grade PE/aluminum foil pouches, pyrogen-free, DNase/RNase-free options available |
| Brand | Ottescience |
|---|---|
| Origin | Tianjin, China |
| Model | AFS-100 |
| Timer Range | 3–60 min |
| Oscillation Speed | 0–180 rpm |
| Oscillation Angle | 4° (tilt) |
| Temperature Range | Ambient to 80 °C |
| Platform Count | 1 |
| Max Load | 4 kg |
| Dimensions (L×W×H) | 320 × 330 × 130 mm |
| Brand | Ottescience |
|---|---|
| Origin | Tianjin, China |
| Model | ARCS-100 |
| Shaker Type | Reciprocating |
| Timing Range | 3–60 min |
| Oscillation Frequency | 0–400 rpm |
| Stroke Length | 30 mm |
| Temperature Range | Ambient to 80 °C |
| Platform Quantity | 1 |
| Maximum Load Capacity | 5 kg |
| Orbit Diameter | 20 mm |
| Dimensions (W×D×H) | 300 × 360 × 175 mm |
| Brand | Ottescience |
|---|---|
| Origin | Tianjin, China |
| Model | AVS-100 |
| Timer Range | 3–60 min |
| Oscillation Speed | 0–2500 rpm |
| Orbit Diameter | 4.5 mm |
| Platform Type | Single non-heated flat platform |
| Load Capacity | 1 kg (at 2500 rpm) |
| Dimensions (L×W×H) | 333 × 237 × 170 mm |
| Housing Material | Acid- and alkali-resistant thermoplastic polymer |
| Foot Design | Four vacuum suction feet |
| Brand | Ottescience |
|---|---|
| Origin | Tianjin, China |
| Model | AVS-300 |
| Timer Range | 1–999 min (bidirectional or continuous) |
| Oscillation Speed | 300–1700 rpm (10 rpm increments) |
| Amplitude | 3 mm |
| Power Consumption | 40 W |
| Plate Capacity | Up to 4 standard microplates (e.g., 96-well, 384-well, 24-well, 48-well) |
| Tray Dimensions | 210 × 278 mm |
| Overall Dimensions | 308 × 342 × 108 mm |
| Input Voltage | 110–240 V, 50/60 Hz |
| Weight | 7.5 kg |
| Housing | Corrosion-resistant injection-molded polymer with integrated splash guard |
| Drive System | Brushless DC motor with microprocessor-based speed and timing control |
| Interface Options | Optional RS-232/USB communication module for remote parameter setting and real-time status readout |
| Brand | Ottescience |
|---|---|
| Model | SSM-3/6 |
| Construction | 316 Stainless Steel (SSM-3: 3-position |
| SSM-6 | 6-position) |
| Material Compliance | USP Class VI-certified elastomers, FDA-compliant wetted surfaces |
| Sterilization | Autoclavable (121°C, 30 min) and flame-sterilizable |
| Filtration Compatibility | Membranes up to 47 mm diameter, standard Luer-lock or threaded filter holders |
| Vacuum Interface | Dual-port universal vacuum inlet with integrated pressure relief valve |
| Weight | SSM-3 ≈ 1.8 kg |
| Operating Temperature Range | -20°C to +150°C (glass components rated to ≥200°C thermal shock) |
| Sealing System | Anodized aluminum clamping arms with dual O-ring compression seals |
| Brand | Ottescience |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | SWB-2000 Constant-Temperature Water Bath Shaker |
| Price Range | USD 140–700 |
| Instrument Type | Full-Range Incubating Shaker |
| Timer Range | 10–90 min |
| Oscillation Frequency | 40–150 rpm |
| Oscillation Amplitude | 18 mm (horizontal) |
| Temperature Range | RT +5°C to 100°C |
| Temperature Accuracy | ±0.2°C |
| Heating Power | 600–1200 W |
| Bath Capacity | 20 L |
| Chamber Dimensions (W×L×D) | 490 × 295 × 150 mm |
| Display | Dual 4-digit LED (setpoint & actual temperature) |
| Safety | Over-Temp Cut-Off (settable, default: setpoint +10°C) |
| Additional Feature | Built-in magnetic stirrer (active when shaker is paused) |
| Brand | Ottescience |
|---|---|
| Model | SWB-2000 |
| Instrument Type | Water Bath Incubator Shaker |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Accuracy | ±0.2°C |
| Heating Power | 1200 W |
| Oscillation Frequency | 40–150 rpm |
| Oscillation Amplitude | 18 mm horizontal |
| Timer Range | 10–90 minutes |
| Bath Capacity | 20 L |
| Chamber Dimensions (W×L×D) | 490 × 295 × 150 mm |
| Display | Dual 4-digit LED (set temperature & actual temperature) |
| Safety Features | Over-temperature cutoff at setpoint +10°C (field-adjustable) |
| Additional Function | Built-in magnetic stirrer for bath homogenization during idle mode |
| Lid Design | Angled condensate-deflecting cover |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | BC43 |
| Imaging Modes | Confocal, Widefield, Brightfield & Differential Phase Contrast (DPC) Transmission |
| Illumination Technology | Patented Borealis™ Uniform Illumination |
| Z-Stack Speed | ≥10× faster than point-scanning confocal systems |
| Software Platform | ANDOR Fusion (GPU-accelerated deconvolution, multi-position montage, hardware-synchronized 3D stitching) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Physical Design | Compact benchtop architecture with integrated vibration damping and optical sealing — no darkroom or optical table required |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | WITec alpha360 Raman Imaging Microscope |
| Pricing | Available Upon Request |
| Brand | PacificImage |
|---|---|
| Origin | Taiwan |
| Model | Glite 600UV/BW |
| Instrument Type | Semi-Automatic Western Blotting & Gel Imaging System |
| Camera | Starlight-grade CMOS, 6 MP (3096 × 2080) |
| Bit Depth | 8/16-bit output |
| Exposure Time | 5 ms – 10 s |
| Excitation Sources | UV (302 nm), Blue LED (470 nm), White LED (optional) |
| Imaging Area | 13 × 18 cm |
| Filter Holder | Manual dual-slot |
| Emission Filter | 620 nm bandpass amber filter |
| Operating System | Windows 7/8/10 |
| Image Formats | TIFF, JPEG, BMP |
| Interface | USB 3.0 |
| Dimensions (W×H×D) | 300 × 260 × 257 mm |
| Weight | 10 kg |
| Brand | Panasonic |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | MPR-210 |
| Temperature Range | 2°C to 8°C (ambient: 5–30°C) |
| Effective Volume | 291 L |
| Internal Dimensions | 570 × 498 × 1070 mm |
| External Dimensions | 660 × 650 × 1635 mm |
| Cooling Method | Forced-air convection cooling |
| Compressor Type | Hermetic |
| Refrigerant | R134a (environmentally compliant) |
| Power Consumption | 262 W |
| Net Weight | 107 kg |
| Door Type | Electrically heated double-glazed door with low-emissivity thermal-reflective film |
| Safety Features | High/low temperature alarm, door-open alarm (>60 s), sensor fault detection, condenser blockage & overheating monitoring |
| Interior Material | Powder-coated steel |
| Exterior Material | Powder-coated steel |
| Standard Accessories | 1 LED interior light, 1 set of keys, 4 adjustable wire shelves |
| Port | One Φ32 mm temperature probe access port (left side) |
| Brand | Aperbio |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Real-Time Fluorescent Quantitative PCR System |
| Sample Throughput | 96-well format |
| Heating Rate | 8.5 °C/s |
| Temperature Accuracy | ±0.1 °C |
| Well-to-Well Temperature Uniformity | ±0.15 °C |
| Thermal Control Technology | Marlow Semiconductor-based Peltier Modules |
| Optical Detection Architecture | Integrated Waveguide-Based Fluorescence Detection |
| Software Platform | CqMAN Quantitative Analysis Suite (Multi-language: English & Chinese) |
| Consumable Compatibility | Automated pressure-assisted sealing for both 0.1 mL and 0.2 mL tube formats |
| Automation Interface | RS-232/USB/Ethernet |
| Brand | Harvard Apparatus |
|---|---|
| Origin | USA |
| Model | LE8815 / LE8816 |
| External Dimensions | 450 × 450 × 200 mm or 220 × 220 × 200 mm |
| Infrared Frame Options | 450 × 450 mm (32 sensors, 25 mm spacing) or 250 × 250 mm (32 sensors, 13 mm spacing) |
| IR Wavelength | 950 nm |
| Sampling Frequency | 40 Hz |
| Software | Acti-Track v5.x |
| Max Concurrent Channels | 32 |
| Configurable Zones | Single-animal or dual-animal (split-zone) mode |
| Behavioral Metrics | Distance traveled, velocity profiles (max/min/mean), time-in-zone, zone entries, rearing count & duration, rotation counts, trajectory-based path analysis, nose-poke detection (threshold-defined), ambulation classification (fast/slow/immobility) |
| Brand | Parvo Medics |
|---|---|
| Origin | USA |
| Model | True One2400 |
| O₂ Analysis Range | 0–100% or 0–25% |
| O₂ Accuracy | ±0.02% |
| O₂ Response Time | 200 ms (21% → 16% in 4 L mixing chamber) |
| CO₂ Analysis Method | NDIR (Non-Dispersive Infrared) |
| CO₂ Range | 0–15% |
| CO₂ Accuracy | ±0.03% (for 0–10% CO₂) |
| CO₂ Response Time | 100 ms |
| Flow Measurement Accuracy | ±0.5% |
| Flow Range | 0–800 L/min |
| Calibration | Dual-stage (3 L syringe, 16% O₂ / 4% CO₂ gas mixture) |
| Operating Temperature | 14–30 °C |
| Relative Humidity | 20–80% RH |
| Warm-up Time | 30 min |
| Power Supply | 100–240 VAC, 50–60 Hz |
| Software Platform | Windows XP–compatible proprietary metabolic analysis suite |
| Data Export | Native Excel (.xls) output |
| Brand | PBI |
|---|---|
| Origin | USA |
| Model | Barocycler® 2320EXT |
| Pressure Range | Ambient (14.7 psi) to 45,000 psi (310 MPa) |
| Temperature Control Range | 4 °C to 95 °C |
| Sample Mass Capacity | 0.2–3 mg |
| Throughput | Up to 16 samples per run |
| Actuation Medium | Deionized Water |
| Input Gas Requirement | 110 psi compressed air or nitrogen |
| Interface | Touchscreen with real-time pressure/temperature curve display |
| Pressure Profiles | Pulse, Ramp, Waveform, Static |
| Data Logging | Full parameter recording, method storage, exportable CSV logs |
| Compliance | Designed for GLP-compliant workflows |
| Brand | PCRmax |
|---|---|
| Origin | United Kingdom |
| Model | AC-1 |
| Instrument Type | Gradient PCR Thermal Cycler |
| Sample Capacity | 96-well (0.2 mL) or 384-well module (field-replaceable) |
| Max Heating/Cooling Rate | 3.4 °C/s |
| Temperature Accuracy | ±0.25 °C |
| Inter-well Temperature Uniformity | ±0.3 °C |
| Temperature Range | 4–100 °C |
| Gradient Range | 10–100 °C |
| Gradient Span | 1–29 °C |
| Gradient Channels | 12 independent temperature zones |
| Heat Lid Temperature | 35–115 °C (adjustable, manually pressure-controlled) |
| Heat Lid Uniformity | ±5 °C |
| Heat Lid Preheating Time | <2 min |
| Display | 7" 1080P full-color LCD touchscreen |
| OS | Embedded Android-based firmware |
| Onboard Program Storage | ≥1,000 protocols |
| USB Expansion Support | Yes (USB-A & USB-B) |
| Power Consumption (30-cycle run) | 0.3 kWh |
| Dimensions (W×D×H) | 200 × 260 × 430 mm |
| Rated Power | 425 W |
| Noise Level | <50 dB(A) |
| Brand | PCRmax |
|---|---|
| Origin | United Kingdom |
| Model | AC-2 |
| Sample Capacity | Two independent blocks (configurable as two 96-well, two 384-well, or mixed 96/384 modules) |
| Max Heating Rate | 3.4 °C/s |
| Temperature Accuracy | ±0.1 °C |
| Block Uniformity | ±0.3 °C |
| Temperature Range | 4–100 °C |
| Gradient Range | 10–100 °C |
| Gradient Span | 1–29 °C |
| Gradient Steps | 12 distinct temperatures with identical hold times |
| Thermal Lid | Adjustable manual pressure, 35–115 °C (or off), uniformity ±5 °C, preheat time <2 min |
| Cooling Method | Peltier-based semiconductor |
| Programmable Cycles | Up to 99 |
| Onboard Storage | ≥1000 protocols |
| Interface | 1× USB-A, 1× USB-B |
| Power | 900 W |
| Dimensions (W×D×H) | 470 × 535 × 330 mm |
| Noise Level | <50 dB (per module) |
| Brand | PEA |
|---|---|
| Origin | Germany |
| Model | PEA VHP Series |
| Sterilization Agent | Vaporized Hydrogen Peroxide (VHP) |
| Sterility Assurance Level (SAL) | ≤10⁻⁶ |
| Log Reduction | ≥6-log against Geobacillus stearothermophilus (ATCC 12980 / ATCC 7953) |
| Filtration Class | ISO 14644-1 Class 5 (H14 HEPA) |
| Cycle Time | ~60 min |
| Operating Conditions | Ambient pressure, low-temperature (≤35 °C) |
| Decomposition Byproducts | H₂O and O₂ only |
| Compliance | EU GMP Annex 1, US FDA 21 CFR Part 11, ISO 14644, ISO 15883, EN 17175 |