Mixing & Dispersion Equipment
Filter
Showing 691–720 of 1327 results
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RT 10 |
| Stirring Positions | 10 |
| Position Spacing | 90 mm |
| Speed Range | 0–1000 rpm |
| Speed Resolution | 10 rpm steps |
| Speed Stability | ±0% deviation per position under load |
| Max. Stirring Volume (H₂O) | 0.4 L per position |
| Stir Bar Length Compatibility | 25–30 mm |
| Heating Power Output | 375 W |
| Heating Temperature Range | Ambient to 120 °C |
| Heating Rate | 3 K/min |
| Adjustable Safety Temperature Limit | 50–150 °C |
| Plate Material | Anodized Aluminum |
| Plate Dimensions | 180 × 495 mm |
| Device Dimensions (W×H×D) | 190 × 60 × 610 mm |
| Weight | 7.5 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Ingress Protection | IP 40 (DIN EN 60529) |
| Electrical Supply | 230 V, 50/60 Hz |
| Total Input Power | 410 W |
| Control Interface | Touch-sensitive keypad with LED display |
| Operation Modes | Forward/Reverse, Eco Mode, Auto-Low-Temp Preheat, Error Code Indication |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Heating Magnetic Stirrer |
| Model | RT 10 |
| Maximum Stirring Volume per Position | 4 L |
| Speed Range | 0–1000 rpm |
| Temperature Control Range | Ambient to 120 °C |
| Heating Power | 375 W |
| Plate Material | Anodized Aluminum |
| Dimensions (W × H × D) | 190 × 60 × 610 mm |
| Weight | 7.5 kg |
| IP Rating | IP40 |
| Power Supply | 230 / 115 / 100 V, 50/60 Hz |
| Safety Temperature Limit | Adjustable from 50 to 150 °C |
| Heating Rate | ~3 K/min |
| Stirring Points | 10 (90 mm spacing) |
| Speed Resolution | 10 rpm increments |
| Minimum Stir Bar Length | 25 mm |
| Maximum Stir Bar Length | 30 mm |
| Operating Environment | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RT 10 |
| Instrument Type | Magnetic Stirrer |
| Max. Stirring Volume (H₂O) | 0.4 L |
| Speed Range | 0–1000 rpm |
| Speed Increment | 10 rpm |
| Heating Plate Temp. Range | Ambient to 120 °C |
| Sample Temp. Range | 5–70 °C (dependent on vessel geometry and thermal coupling) |
| Heating Power | 375 W |
| Safety Temp. Limit Adjustable | 50–150 °C |
| Stirring Points | 10 |
| Inter-point Spacing | 90 mm |
| Stir Bar Length Compatibility | 25–30 mm |
| Plate Material | Anodized Aluminum |
| Plate Dimensions | 180 × 495 mm |
| Overall Dimensions | 190 × 60 × 610 mm |
| Weight | 7.5 kg |
| IP Rating | IP40 |
| Input Voltage | 230 / 115 / 100 V, 50/60 Hz |
| Power Consumption | 410 W |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RT 15 |
| Speed Range | 0–1000 rpm (in 10 rpm increments) |
| Max. Stirring Volume (H₂O) | 0.4 L per position |
| Number of Stirring Positions | 15 |
| Position Spacing | 90 mm |
| Stirrer Bar Length Compatibility | 25–30 mm |
| Heating Power Output | 580 W |
| Heating Temperature Range | Ambient to 120 °C |
| Heating Rate | 3 K/min |
| Adjustable Safety Temperature Limit | 50–150 °C |
| Plate Material | Anodized Aluminum |
| Plate Dimensions | 270 × 495 mm |
| Overall Dimensions | 280 × 60 × 610 mm |
| Weight | 10.5 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Protection Class | IP 40 (DIN EN 60529) |
| Supply Voltage | 230 V, 50/60 Hz |
| Input Power | 620 W |
| Fuse | 1× T6.3A, 250 V |
| Control Interface | Touch-sensitive keypad with LED temperature display |
| Rotation Direction | Forward/reverse selectable |
| Operation Mode | Continuous duty cycle |
| Speed stability | ±0 % deviation under load variation |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Magnetic Stirrer |
| Model | RT 15 |
| Max. Stirring Volume | 4 L per position (15 positions) |
| Speed Range | 0–1000 rpm |
| Speed Increment | 10 rpm |
| Temp. Control Range | Ambient to 120 °C (heating plate) |
| Heating Power | 580 W |
| Plate Material | Anodized Aluminum |
| Plate Dimensions | 270 × 495 mm |
| Overall Dimensions | 280 × 60 × 610 mm |
| Weight | 10.5 kg |
| IP Rating | IP40 |
| Input Voltage | 230 / 115 / 100 V, 50/60 Hz |
| Safety Circuit Range | 50–150 °C |
| Temp. Ramp Rate | Adjustable up to 3 K/min |
| Operating Environment | 5–40 °C, ≤80 % RH |
| Stir Bar Length Compatibility | 25–30 mm |
| Inter-point Spacing | 90 mm |
| Speed Uniformity | ±0 % deviation across all 15 positions |
| Control Interface | Touch-sensitive keypad with LED display |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RT 5 |
| Speed Range | 0–1000 rpm (10 rpm increments) |
| Max. Stirring Volume (H₂O) | 0.4 L per position |
| Stir Bar Length Compatibility | 25–30 mm |
| Heating Power Output | 175 W |
| Heating Temperature Range | Ambient to 120 °C |
| Heating Rate | 3 K/min |
| Adjustable Safety Temperature Limit | 50–150 °C |
| Plate Material | Anodized Aluminum |
| Plate Dimensions | 110 × 495 mm |
| Overall Dimensions | 120 × 60 × 610 mm |
| Weight | 4 kg |
| Permissible Ambient Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP 40 (DIN EN 60529) |
| Voltage | 230 V, 50/60 Hz (optional 115 V / 100 V versions available) |
| Input Power | 200 W |
| Display | LED |
| Control Interface | Touch-sensitive buttons |
| Operation Modes | Forward/Reverse, Eco Mode, Auto-Low-Temp Preheat |
| Features | Error Code Display, Uniform Magnetic Field Distribution, Load-Independent Speed Stability, Homogeneous Plate Temperature Profile |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 20 digital |
| Max. Stirring Volume (H₂O) | 20 L |
| Motor Input Power | 70 W |
| Motor Output Power | 35 W |
| Speed Range | 60–2000 rpm |
| Speed Display | LED |
| Max. Viscosity | 10,000 mPa·s |
| Max. Output Power at Stirring Shaft | 26 W |
| Continuous Duty Cycle | 100 % |
| Max. Torque at Shaft | 150 N·cm (at 100 rpm), 300 N·cm (overload at 60 rpm), 24 N·cm (at 1000 rpm) |
| Speed Control | Infinitely Variable |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±30 rpm |
| Clamp Type | Fixed Chuck |
| Clamp Jaw Range | 0.5–10 mm |
| Hollow Stirring Shaft ID | 10.5 mm |
| Hollow Shaft Insertion (stationary) | Yes |
| Support Arm Diameter | 13 mm |
| Support Arm Length | 160 mm |
| Rated Torque | 1.5 N·m |
| Dimensions (W×H×D) | 88 × 294 × 212 mm |
| Weight | 3.1 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP20 per DIN EN 60529 |
| Voltage | 220–240 V |
| Frequency | 50/60 Hz |
| Instrument Input Power | 72 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | RW 20 digital |
| Motor Input Power | 70 W |
| Motor Output Power | 35 W |
| Max. Stirring Volume (H₂O) | 20 L |
| Speed Range | 60–2000 rpm |
| Speed Display | LED |
| Speed Control | Stepless Mechanical |
| Max. Viscosity | 10,000 mPa·s |
| Max. Torque (at 60 rpm) | 300 N·cm |
| Max. Torque (at 100 rpm) | 150 N·cm |
| Max. Torque (at 1000 rpm) | 24 N·cm |
| Shaft Output Power | 26 W |
| Duty Cycle | 100 % |
| Shaft Clamp Range | Ø 0.5–10 mm |
| Hollow Shaft ID | 10.5 mm |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Dimensions (W×H×D) | 88 × 294 × 212 mm |
| Weight | 3.1 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP20 |
| Voltage | 220–240 V / 100–115 V |
| Frequency | 50/60 Hz |
| Rated Torque | 1.5 N·m |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 20 digital |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 20 L |
| Speed Range | 60–2000 rpm |
| Input Power | 72 W |
| Output Power | 35 W |
| Max. Torque | 150 N·cm (at 100 rpm), 300 N·cm (overload at 60 rpm) |
| Display | LED |
| Speed Control | Stepless Mechanical |
| Shaft Clamp Range | 0.5–10 mm |
| Hollow Shaft ID | 10.5 mm |
| IP Rating | IP20 |
| Dimensions (W×H×D) | 88 × 294 × 212 mm |
| Weight | 3.1 kg |
| Ambient Temp. | 5–40 °C |
| Relative Humidity | ≤80 % |
| Voltage | 220–240 V / 100–115 V |
| Frequency | 50/60 Hz |
| Max. Viscosity | 10,000 mPa·s |
| Continuous Duty Cycle | 100 % |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 20 digital |
| Max. Viscosity | 10,000 mPa·s |
| Max. Volume (Water) | 20 L |
| Speed Range | 60–2000 rpm |
| Motor Input/Output Power | 70 / 35 W |
| Shaft Output Power | 26 W |
| Duty Cycle | 100% |
| Max. Torque at 100 rpm | 150 N·cm |
| Chuck Capacity | 0.5–10 mm |
| Support Rod | Ø13 × 160 mm |
| Dimensions (W×D×H) | 88 × 212 × 294 mm |
| Weight | 3.1 kg |
| Protection Class | IP20 (DIN EN 60529) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 28 digital |
| Maximum Stirring Volume | 80 L (H₂O) |
| Speed Range | 60–1400 rpm |
| Temperature Control Range | 5–40 °C |
| Motor Input Power | 220 W |
| Motor Output Power | 90 W |
| Max. Torque | 900 N·cm (at 60 rpm), 1144 N·cm (overload at 100 rpm) |
| Max. Viscosity | 50,000 mPa·s |
| Speed Display | LED |
| Speed Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±10 rpm |
| Clamp Shaft Diameter Range | 1–10 mm |
| Hollow Shaft Inner Diameter | 10.5 mm |
| Dimensions | 123 × 364 × 252 mm |
| Weight | 7.5 kg |
| IP Rating | IP40 |
| Noise Level | 62.5 dB(A) |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Voltage | 220–240 V / 115 V / 100 V, 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 28 digital |
| Max. Stirring Volume (H₂O) | 80 L |
| Motor Input Power | 220 W |
| Motor Output Power | 90 W |
| Speed Range | 60–1400 rpm (LED digital display) |
| Max. Viscosity | 50,000 mPa·s |
| Max. Torque | 900 N·cm (at 100 rpm), 1144 N·cm (overload at 60 rpm), 86 N·cm (at 1000 rpm) |
| Dual-Speed Ranges (50 Hz) | I: 60–400 rpm, II: 240–1400 rpm |
| Dual-Speed Ranges (60 Hz) | I: 72–480 rpm, II: 288–1680 rpm |
| Speed Control | Continuous, mechanical |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±10 rpm |
| Chuck Type | Fixed collet |
| Clamp Range | Ø1–10 mm |
| Hollow Shaft | Ø10.5 mm (allows insertion of probes/thermometers in stopped state) |
| Extension Arm | Ø16 mm × 145 mm |
| Rated Torque | 9 N·m |
| Housing Material | Cast aluminum with thermoplastic polymer coating |
| Noise Level (no disperser) | 62.5 dB(A) |
| Dimensions (W×H×D) | 123 × 364 × 252 mm |
| Weight | 7.5 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % RH |
| Ingress Protection | IP40 (DIN EN 60529) |
| Voltage | 220–240 V AC |
| Frequency | 50/60 Hz |
| Input Power | 220 W |
| Thermal Cut-off | Integrated motor overheat protection |
| Safety Features | Overload detection, error code display, ergonomic design, quiet operation, constant torque transmission |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | RW 28 digital |
| Instrument Type | Electric Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 80 L |
| Speed Range | 60 – 1400 rpm |
| Input Power | 220 W |
| Output Power | 90 W |
| Max. Torque | 900 N·cm (at 100 rpm) / 1144 N·cm (overload at 60 rpm) |
| Max. Viscosity | 50,000 mPa·s |
| Speed Display | LED |
| Speed Control | Continuously Variable Mechanical |
| Protection Class | IP 40 |
| Noise Level | 62.5 dB(A) |
| Dimensions (W × H × D) | 123 × 364 × 252 mm |
| Weight | 8.966 kg |
| Ambient Operating Conditions | 5 – 40 °C, ≤80 % RH |
| Compliance | DIN EN 60529, CE, RoHS |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Digital Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 80 L |
| Speed Range | 60–1400 rpm |
| Motor Output Power | 90 W |
| Max. Torque (at 60 rpm) | 1144 N·cm |
| Speed Control | Stepless Mechanical |
| Display | LED |
| Protection Class | IP 40 |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Noise Level (no dispersing tool) | 62.5 dB(A) |
| Dimensions (W×H×D) | 123 × 364 × 252 mm |
| Weight | 8.966 kg |
| Input Voltage | 220–240 V / 115 V / 100 V, 50/60 Hz |
| Motor Input Power | 220 W |
| Max. Viscosity | 50,000 mPa·s |
| Shaft Clamping Range | Ø1–10 mm |
| Hollow Shaft ID | 10.5 mm |
| Max. Continuous Duty Cycle | 100 % |
| Thermal Protection | Integrated Motor Overheat Limiter |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 28 digital |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 80 L |
| Speed Range | 60–400 rpm (Range I, 50 Hz) / 240–1400 rpm (Range II, 50 Hz) |
| Temperature Operating Range | 5–40 °C |
| Motor Output Power | 90 W |
| Max. Torque | 900 N·cm (Range I) / 300 N·cm (Range II) |
| Shaft Clamp Capacity | 1–10 mm |
| IP Rating | IP40 |
| Noise Level | 62.5 dB(A) |
| Dimensions (W×H×D) | 123 × 364 × 252 mm |
| Weight | 7.5 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 47 digital |
| Maximum Stirring Volume | 200 L (H₂O) |
| Speed Range | 57–1300 rpm |
| Speed Control | Continuously Variable, Dual-Speed Range (Range I: 57–275 rpm |
| Range II | 275–1300 rpm) |
| Speed Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±10 rpm |
| Max. Torque (at 60 rpm) | 4642 N·cm |
| Rated Torque | 30 N·m |
| Max. Viscosity | 100,000 mPa·s |
| Motor Input Power | 513 W |
| Motor Output Power | 370 W |
| Stirring Shaft Output Power | 300 W |
| Duty Cycle | 100% continuous operation |
| Clamp Jaw Range | 3–16 mm |
| Hollow Shaft Inner Diameter | 13 mm |
| Housing Material | Cast Aluminum with Thermoplastic Coating |
| IP Rating | IP54 |
| Dimensions (W×H×D) | 145 × 465 × 358 mm |
| Weight | 16 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Power Supply | 3 × 400 V / 3 × 230 V, 50 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 47 digital |
| Max. Mixing Volume (H₂O) | 200 L |
| Input Power | 511 W |
| Output Power | 370 W |
| Motor Principle | Three-phase AC |
| Speed Display | LED |
| Speed Range | 57–1300 rpm |
| Max. Viscosity | 100,000 mPa·s |
| Max. Shaft Output Power | 300 W |
| Duty Cycle | 100 % continuous operation |
| Max. Torque (60 rpm) | 4642 N·cm |
| Max. Torque (100 rpm) | 3000 N·cm |
| Max. Torque (1000 rpm) | 285 N·cm |
| Torque Range I | 3000 N·cm |
| Torque Range II | 620 N·cm |
| Speed Range I (50 Hz) | 57–275 rpm |
| Speed Range II (50 Hz) | 275–1300 rpm |
| Speed Control | Continuously variable |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±10 rpm |
| Impeller Mounting | Fixed chuck |
| Chuck Capacity | Ø 3–16 mm |
| Hollow Shaft ID | 13 mm |
| Mounting | Flange |
| Speed Control Type | Mechanical |
| Rated Torque | 30 N·m |
| Housing Material | Cast aluminum with thermoplastic polymer coating |
| Dimensions (W×H×D) | 145 × 478 × 358 mm |
| Weight | 16.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 per DIN EN 60529 |
| Voltage | 3 × 400 V |
| Frequency | 50 Hz |
| Instrument Input Power | 513 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Digital Overhead Mechanical Stirrer |
| Max. Mixing Volume (H₂O) | 200 L |
| Speed Range | 57–1300 rpm |
| Motor Output Power | 370 W |
| Max. Torque (at 60 rpm) | 4642 N·cm |
| Max. Viscosity | 100,000 mPa·s |
| IP Rating | IP54 |
| Input Voltage | 3 × 400 V / 3 × 230 V, 50 Hz |
| Dimensions (W×H×D) | 145 × 465 × 358 mm |
| Weight | 16 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW16 Basic |
| Max. Volume (H₂O) | 10 L |
| Speed Range | 40–1200 rpm |
| Input Power | 75 W |
| Output Power | 55 W |
| Max. Viscosity | 10,000 mPa·s |
| Max. Shaft Output Power | 53 W |
| Max. Torque | 40 N·cm |
| Torque at 60 rpm | 50 N·cm |
| Torque at 100 rpm | 48 N·cm |
| Torque at 1000 rpm | 34 N·cm |
| Chuck Range | 0.5–10 mm |
| Hollow Shaft ID | 11 mm |
| Delay Arm | Ø13 mm × 160 mm |
| Rated Torque | 0.4 N·m |
| Dimensions (W×H×D) | 80 × 222 × 190 mm |
| Weight | 2.8 kg |
| Ambient Temp. | 5–40 °C |
| Relative Humidity | ≤80 % |
| IP Rating | IP42 |
| Display | Analog Scale |
| Drive Type | Gearless Continuous Speed Control |
| Safety Features | Thermal Cut-off, Electronic Overload Protection, Safe Circuit Interruption |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 20 Digital |
| Max. Mixing Volume | 20 L |
| Speed Range | 60–2000 rpm (two ranges: 60–500 rpm / 240–2000 rpm) |
| Viscosity Range | up to 10,000 mPa·s |
| Motor Input/Output Power | 70 W / 35 W |
| Shaft Output Power | 26 W |
| Duty Cycle | 100% |
| Chuck Torque at 100 rpm | 150 N·cm |
| Chuck Capacity | 0.5–10 mm |
| Support Rod Diameter/Length | 13 mm / 160 mm |
| Dimensions (W×D×H) | 88 × 212 × 294 mm |
| Weight | 3.1 kg |
| Protection Class | IP20 (DIN EN 60529) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW28 Basic |
| Max. Viscosity | 50,000 mPa·s |
| Speed Range | 60–1400 rpm (two ranges, continuously adjustable) |
| Max. Volume (H₂O) | 80 L |
| Motor Output Power | 90 W |
| Max. Torque | 900 N·cm (at 100 rpm), 1144 N·cm (overload at 60 rpm) |
| Shaft Output Power | 90 W |
| Duty Cycle | 100% continuous operation |
| Clamp Range | 1–10 mm |
| Hollow Shaft ID | 10.5 mm |
| IP Rating | IP42 |
| Dimensions (W×H×D) | 123 × 364 × 252 mm |
| Weight | 7.4 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Voltage | 100–240 V, 50/60 Hz |
| Input Power | 220 W |
| Shaft Fixation | Chuck |
| Support | Adjustable extension arm (Ø16 mm, 145 mm length) |
| Display | Analog speed scale |
| Compliance | DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW47 Digital Display |
| Input Power | 513 W |
| Output Power | 370 W |
| Stirring Shaft Output Power | 300 W |
| Speed Range | 57–1300 rpm (continuously adjustable, two speed ranges: I = 57–275 rpm, II = 275–1300 rpm) |
| Max. Viscosity | 100,000 mPa·s |
| Max. Torque | 3000 N·cm (at 100 rpm), 4642 N·cm (overload at 60 rpm), 285 N·cm (at 1000 rpm) |
| Max. Stirring Volume (H₂O) | 200 L |
| Chuck Capacity | 3–16 mm |
| Hollow Shaft ID | 13 mm |
| Duty Cycle | 100 % continuous operation |
| Protection Rating | IP54 (DIN EN 60529) |
| Dimensions (W × H × D) | 145 × 445 × 340 mm |
| Weight | 15 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Voltage | 3 × 400 V / 3 × 230 V, 50 Hz |
| Clamp Mounting | Flange |
| Speed Indication | Digital display |
| Torque Display | Not available |
| RS232 Interface | Not available |
| Analog Output | Not available |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Magnetic Stirrer with Integrated Heating Plate |
| Max. Stirring Volume | 20 L (H₂O) |
| Speed Range | 50 – 1500 rpm |
| Temperature Control Range | Ambient + Self-Heating of Plate – 310 °C |
| Heating Power | 600 W |
| Plate Material | Anodized Aluminum |
| Plate Diameter | Ø 135 mm |
| Dimensions (W × H × D) | 160 × 270 × 85 mm |
| Weight | 2.4 kg |
| IP Rating | IP42 |
| Interface | RS232, USB-B |
| Compliance | DIN EN 60529, CE, RoHS |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | T 18 Brushless Digital ULTRA-TURRAX® |
| Motor Input Power | 400 W |
| Motor Output Power | 300 W |
| Volume Range (H₂O) | 0.001–1.5 L |
| Max. Viscosity | 5000 mPa·s |
| Speed Range | 3000–25,000 rpm |
| Speed Accuracy | ±2 % |
| Speed Control | Continuously Variable |
| Speed Display | LED Digital |
| Timer Function | Yes |
| Timer Display | LED |
| Continuous Duty Cycle | 100 % |
| Noise Level (no dispersing tool) | 70 dB(A) |
| Motor Principle | Brushless DC Motor |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Process Type | Batch |
| IP Rating | IP 30 (DIN EN 60529) |
| USB Interface | Yes |
| Voltage | 220–240 V |
| Frequency | 50/60 Hz |
| Dimensions (W×H×D) | 89 × 270 × 161 mm |
| Weight | 3 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Imported Laboratory Disperser |
| Model | T 18 Digital |
| Motor Input Power | 500 W |
| Motor Output Power | 300 W |
| Volume Range | 0.001–1.5 L (H₂O) |
| Max. Viscosity | 5000 mPa·s |
| Speed Range | 3000–25,000 rpm |
| Speed Accuracy | ±1 % |
| Speed Display | LED digital |
| Speed Control | Continuously variable (electronic) |
| Noise Level (without dispersing tool) | 75 dB(A) |
| Shaft Diameter | 13 mm |
| Shaft Length | 160 mm |
| IP Rating | IP20 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| Voltage | 220–240 V AC |
| Frequency | 50/60 Hz |
| Dimensions (W×H×D) | 87 × 271 × 106 mm |
| Weight | 2.5 kg |
| Duty Cycle | 100 % continuous operation |
| Protection | Electronic overload protection |
| Cleaning | Tool-free disassembly of stainless-steel dispersing tools |
| Optional | Disposable dispersing tools (two sizes) |
| Error Code Display | Yes |
| Operation Mode | Batch processing only |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Laboratory Equipment |
| Model | T 18 mini digital Solution |
| Price | Upon Request |
| Motor Input Power | 210 W |
| Motor Output Power | 160 W |
| Volume Capacity (H₂O) | 0.001–1.5 L |
| Max. Viscosity | 2000 mPa·s |
| Speed Range | 3000–25,000 rpm |
| Speed Accuracy | ±3 % |
| Speed Control | Continuous (Stepless) |
| Speed Display | TFT LCD |
| Timer Function | Yes (LED display) |
| Continuous Duty Cycle | 100 % |
| Noise Level (no dispersing tool) | 75 dB(A) |
| Motor Type | Brushless DC Motor |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Process Mode | Batch |
| IP Rating | IP30 (per DIN EN 60529) |
| USB Interface | USB-C |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Standby Power Consumption | 3 W |
| DC Supply | 48 V =, 4500 mA |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH (non-condensing) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | T 25 Digital |
| Motor Input Power | 800 W |
| Motor Output Power | 500 W |
| Volume Range (H₂O) | 1 mL – 2 L |
| Max. Viscosity | 5,000 mPa·s |
| Speed Range | 3,000 – 25,000 rpm |
| Speed Accuracy | ±1 % |
| Speed Display | LED |
| Speed Control | Continuous (Stepless) |
| Noise Level (without dispersing element) | 75 dB(A) |
| Shaft Diameter | 13 mm |
| Shaft Length | 160 mm |
| IP Rating | IP20 |
| Operating Temperature | 5 – 40 °C |
| Relative Humidity Limit | 80 % |
| Voltage | 220–240 V |
| Frequency | 50/60 Hz |
| Dimensions (W × H × D) | 87 × 271 × 106 mm |
| Weight | 2.5 kg |
| Protection Class | DIN EN 60529 IP20 |
| Duty Cycle | 100 % continuous operation |
| Material | Stainless Steel (dispersion tools), Anodized Aluminum (housing) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Probe-type Rotational Homogenizer |
| Model | T 25 digital ULTRA-TURRAX® |
| Dimensions (W×D×H) | 87 × 271 × 106 mm |
| Volume Range | 1–2000 mL (H₂O) |
| Motor Input Power | 800 W |
| Motor Output Power | 500 W |
| Speed Range | 3000–25,000 rpm |
| Speed Accuracy | ±1 % |
| Speed Display | LED |
| Speed Control | Continuous (Stepless) |
| Max. Viscosity | 5000 mPa·s |
| Noise Level (without dispersing tool) | 75 dB(A) |
| Shaft Diameter | 13 mm |
| Shaft Length | 160 mm |
| IP Rating | IP20 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| Voltage | 220–240 V |
| Frequency | 50/60 Hz |
| Weight | 2.5 kg |
| Duty Cycle | 100 % continuous operation |
| Compliance | DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Type | Imported Laboratory Disperser |
| Model | T 25 mini control Solution |
| Motor Input Power | 210 W |
| Motor Output Power | 160 W |
| Volume Range (H₂O) | 0.001–1.5 L |
| Max. Viscosity | 2000 mPa·s |
| Speed Range | 600–25,000 rpm |
| Speed Accuracy | ±3% (n > 3000 rpm), ≤±100 rpm (n < 3000 rpm) |
| Speed Control | Continuously Variable |
| Display | TFT Touchscreen with LED Backlight |
| Temperature Measurement Range | 0–125 °C |
| Temp. Resolution | 0.1 K |
| Temp. Accuracy | ±1 K |
| Timer Function | Yes |
| Continuous Duty Cycle | 100% |
| Dimensions (W×H×D) | 66 × 186 × 100 mm |
| Weight | 1.8 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Ingress Protection | IP30 (DIN EN 60529) |
| Interfaces | RS232, USB-C, WiFi, Ethernet, PAN |
| Voltage | 100–240 V AC, 50/60 Hz |
| Standby Power Consumption | 3 W |
| DC Supply | 48 V =, 4500 mA |
| Noise Level (no dispersing tool) | 75 dB(A) |
| Drive Principle | Brushless DC Motor |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Process Type | Batch Processing |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | T 25 mini control ULTRA-TURRAX® |
| Motor Input Power | 210 W |
| Motor Output Power | 160 W |
| Max. Volume (H₂O) | 1.5 L |
| Min. Volume (H₂O) | 0.001 L |
| Max. Viscosity | 2000 mPa·s |
| Speed Range | 600 – 25,000 rpm |
| Speed Accuracy | ±3 % |
| Speed Control | Continuous (Infinitely Variable) |
| Speed Display | LED |
| Noise Level (no dispersing tool) | 75 dB(A) |
| Drive Principle | Brushless DC Motor |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Temperature Measurement Range | 0 – 125 °C |
| Temp. Resolution | 0.1 K |
| Temp. Accuracy | ±1 K |
| Timer Function | Yes |
| Timer Display | LED |
| Continuous Duty Cycle | 100 % |
| Dimensions (W × H × D) | 66 × 186 × 100 mm |
| Weight | 1.8 kg |
| Ambient Temp. Range | 5 – 40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP 30 (DIN EN 60529) |
| Interfaces | RS 232, USB, Bluetooth, Wi-Fi, Ethernet |
| Supply Voltage | 100 – 240 V AC |
| Frequency | 50/60 Hz |
| Standby Power Consumption | 3 W |
| DC Supply | 48 V = |
| Max. Current Draw | 4500 mA |