Optical Measurement Instruments
Filter
Showing 181–210 of 788 results
| Brand | AQUALABO |
|---|---|
| Origin | France |
| Model | NTU |
| Measurement Principle | 90° Infrared Light Scattering at 880 nm |
| Turbidity Range | 0–4000 NTU (5 selectable sub-ranges) |
| TSS Range | 0–4500 mg/L |
| Resolution | 0.01–1 NTU / mg/L |
| Accuracy | < ±5% of reading |
| Temperature Compensation | Integrated CTN sensor (±0.5 °C) |
| Output | Modbus RTU over RS-485 (standard), SDI-12 (optional) |
| Power Supply | 5–12 VDC |
| Typical Current Draw | 820 µA (RS-485, 1 Hz) |
| Peak Pulse | 500 mA |
| Enclosure Material | PVC, Delrin®, Quartz, PMMA, Polyamide |
| Dimensions | Ø27 mm × 170 mm |
| Weight | 300 g (sensor + 3 m cable) |
| Pressure Rating | 5 bar |
| IP Rating | IP68 |
| Operating Temperature | 0–50 °C |
| Storage Temperature | −10 to +60 °C |
| Calibration Standards | NF EN 872 (0–500 mg/L), NFT 90 105-2 (>500 mg/L) |
| Max Refresh Rate | < 1 s |
| Brand | ARCoptix |
|---|---|
| Model | maestro |
| Origin | USA |
| Resolution | 4 cm⁻¹ (standard), down to 0.5 cm⁻¹ (optional) |
| Spectral Range | Configurable up to 5000–830 cm⁻¹ (2–12 µm) |
| Detector | TE-cooled MCT, Peltier-stabilized |
| Interferometer Type | Alignment-Insensitive Dual Retroreflector Design |
| Wavenumber Reproducibility | <10 ppm |
| Scan Rate | 1 spectrum/sec (continuous mode) |
| ADC | 24-bit |
| Interface | USB 2.0 |
| Power | 12 V / 8 W (interferometer only) |
| Operating Temperature | 10–40 °C |
| Dimensions | 180 × 160 × 80 mm |
| Weight | 1.8 kg |
| Software SDK | C, C#, LabVIEW, MATLAB APIs included |
| Compliance | Designed for integration into GLP/GMP- and ISO/IEC 17025-aligned systems |
| Fiber Compatibility | SMA-905, supports CIR (1–6 µm), PIR (4–18 µm), CaF₂/BK7 coupling optics |
| Brand | Arete Associates |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | NewOpto |
| Core Technology | Diode-Pumped Solid-State (DPSS) Q-Switched Laser |
| Wavelength Options | 1064 nm, 532 nm, 355 nm, 266 nm, 1572 nm |
| Pulse Energy Range | 10–200 mJ |
| Average Power | 1–6 W |
| Pulse Width | ~3 ns (FWHM) |
| Repetition Rate | 30–100 Hz |
| Beam Quality (M²) | <5 to <10 |
| Dimensions | 185×185×102 mm³ or 259×185×120 mm³ |
| Brand | Arroyo Instruments |
|---|---|
| Origin | USA |
| Model | 262 Series |
| Mounting Compatibility | TO-Can, Butterfly, C-Mount, and Custom Packages |
| Thermal Control | Integrated Peltier-based Temperature Controller (±0.1 °C Stability) |
| Electrical Interface | DB-15 / DB-9 / 9W4 Connector |
| Cooling | Forced-air with High-Conductivity Heat Sink |
| Compliance | RoHS-compliant, CE-marked, Designed for GLP-Compatible Lab Environments |
| Software Integration | Compatible with Arroyo’s TECSource™ Control Suite (USB/RS-232) |
| Brand | Arroyo Instruments |
|---|---|
| Origin | USA |
| Model | 4201 |
| Current Range | 100 mA to 20 A (dual-range configuration) |
| Output Voltage | Up to 10 V |
| Accuracy | 0.025% + 0.03 mA |
| Current Noise | < 1 µA RMS |
| Small-Signal Bandwidth | 325 kHz |
| Interface | USB & RS-232 |
| Isolation | Fully galvanically isolated I/O (input/output, photodiode input, laser output) |
| Modulation | Analog voltage input (0–5 V or ±5 V), hardware-protected |
| QCW Option | Not available on 4201 (standard CW only) |
| Compliance | CE, RoHS, FCC Class B |
| Software Compatibility | SCPI-compliant command set, backward-compatible with industry-standard laser controller protocols |
| Brand | Arroyo Instruments |
|---|---|
| Origin | USA |
| Model | 485 Series |
| Output Current Range | up to 10 A |
| Output Voltage Range | up to 15 V |
| Current Accuracy | 0.05% + offset (e.g., 0.4–1.6 mA) |
| Current Noise | < 60 µA RMS |
| Bandwidth | 45–65 kHz |
| Temperature Stability | ±0.004°C |
| Compatible Sensors | Thermistor, RTD |
| Control Interfaces | USB, RS-232, Analog (0–5 V or 0–10 V) |
| Power Output (TECPak) | 32 W / 55 W |
| Form Factor | Compact OEM module (≈1/3 volume of benchtop equivalents) |
| Brand | Arroyo Instruments |
|---|---|
| Origin | USA |
| Model | 6301 |
| Laser Current Range | 100 mA to 4 A (selectable per variant) |
| Output Voltage | Up to 10 V |
| Current Accuracy | 0.025% + 0.03 mA |
| Current Noise | < 1 µA RMS |
| Control Bandwidth | 325 kHz |
| TEC Power | 60 W |
| Temperature Sensor Support | Thermistor, RTD, LM335, AD590 |
| Interfaces | USB, RS-232 |
| Isolation | Optically and electrically isolated I/O |
| Compliance | CE, RoHS, FCC Class A |
| Software Compatibility | LabVIEW, Python, MATLAB via ASCII command protocol |
| Brand | Arroyo Instruments |
|---|---|
| Origin | USA |
| Model | 7000 Series |
| Form Factor | 1U or 2U Rack-Mountable / Benchtop |
| Laser Driver Channels | Up to 4 per unit |
| Max Laser Current | 4 A |
| Max Laser Voltage | 8 V |
| TEC Driver Channels | Up to 4 per unit |
| Max TEC Current | 18 A |
| Max TEC Voltage | 28 V |
| Max TEC Power | 420 W |
| Temperature Stability (24 h) | ±0.1 °C |
| Short-Term Stability (1 h) | <0.004 °C |
| Control Interface | Ethernet, USB |
| PID Auto-Tuning | Yes |
| Compatibility | ILX Lightwave & Newport TEC/LD command set |
| Input Power | Universal AC (90–264 VAC, 47–63 Hz) |
| Brand | Arroyo Instruments |
|---|---|
| Origin | USA |
| Model | 5240 |
| Temperature Stability | ±0.004 °C |
| Control Power Range | 28 W |
| Max Current | 4 A |
| Max Voltage | 7 V |
| Supported Sensors | Thermistor |
| Interface | USB, RS-232 |
| AutoTune PID Function | Yes |
| Display | High-contrast VFD |
| Brand | art photonics |
|---|---|
| Origin | Germany |
| Fiber Type | Step-index multimode chalcogenide (CIR) glass |
| Wavelength Range | 1.1–6.5 µm |
| Core Diameter | 500 ± 10 µm |
| Cladding Diameter | 550 ± 15 µm |
| Numerical Aperture (NA) | 0.30 ± 0.03 |
| Coating Diameter (dual-polymer) | 700 ± 30 µm |
| Connector Type | FC/PC to FC/PC |
| Protective Jacket | Metal sheath, OD 3.7 mm |
| Length | 1.00 ± 0.05 m |
| Minimum Bend Radius | 100 mm |
| Operating Temperature | –50 °C to +90 °C |
| Attenuation | 0.2–0.3 dB/m (at 2.5–4 µm and 4.5–5 µm) |
| Brand | Artec |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Quotation | Upon Request |
| Depth Resolution | 1280×1024 @ 7 fps / 640×480 @ 30 fps / 320×240 @ 30 fps |
| Color Resolution | 1920×1080 |
| Depth Range | 0.6–2 m |
| Measurement Time | 2 s |
| Measurement Volume | 1200 mm × 1200 mm × 2000 mm (L×W×H) |
| Point Density | 120 pts/cm² |
| Depth of Field | 800 mm |
| Accuracy | ±1 mm |
| Operating Voltage | AC 220 V |
| Minimum Installation Footprint | 1.5 m × 2 m |
| Brand | Artec |
|---|---|
| Origin | Imported (Non-China) |
| Manufacturer Type | Authorized Distributor |
| Model | Artec Eva |
| Scanning Principle | White Light Structured Light |
| Frame Rate | Up to 16 fps |
| Point Capture Speed | Up to 2 million points/sec |
| Accuracy | Up to 0.1 mm |
| Resolution | 0.5 mm |
| Texture Resolution | 1.3 MP |
| Weight | 0.85 kg |
| Battery Life | Up to 6 hours |
| Operating System Compatibility | Windows 10/11, compatible with tablets |
| Safety Class | Class 1 LED (IEC 60825-1 compliant) |
| Calibration-Free Operation | Yes |
| Multi-Scanner Synchronization | Supported |
| SDK Available | Artec SDK (free download) |
| Brand | Artec |
|---|---|
| Model | Eva |
| Technology | Structured Light 3D Scanning |
| Scan Speed | Up to 16 fps |
| Resolution | Up to 0.5 mm |
| Accuracy | Up to 0.1 mm |
| Texture Capture | Full-color RGB (2.3 MP) |
| Field of View | 244 × 169 mm (at 400 mm distance) |
| Working Distance | 0.4–1.0 m |
| Weight | 0.85 kg |
| Power | USB 3.0 powered |
| Software | Artec Studio (v19+) |
| Compliance | CE, FCC, RoHS |
| Brand | Artec |
|---|---|
| Origin | Imported (Non-China) |
| Manufacturer Type | Authorized Distributor |
| Model | Leo |
| 3D Resolution | 0.25 mm |
| Point Accuracy | ≤0.1 mm |
| Accuracy Drift | ≤0.03% per 100 cm |
| Light Source | Dual-source — White-light LED Array (12 LEDs) + VCSEL for 3D Structured Light |
| Near-Range FOV | 246 × 153 mm |
| Far-Range FOV | 843 × 527 mm |
| Working Distance | 0.35–1.2 m |
| Texture Capture | Yes |
| Video Frame Rate | Up to 80 FPS |
| Data Acquisition Time | 0.0002 s per frame |
| Capture Speed | Up to 4,000,000 points/sec |
| Weight | 1.8 kg |
| Power Supply | Internal replaceable battery or external 12 V DC |
| Dimensions (H×D×W) | 227 × 163 × 228 mm |
| Connectivity | Wi-Fi 5 (802.11ac), Gigabit Ethernet, SD card slot |
| Onboard Processing | Yes (NVIDIA Jetson TX2 + custom FPGA co-processor) |
| Calibration | Self-calibrating |
| Brand | Artec |
|---|---|
| Origin | Imported (Non-China) |
| Manufacturer Type | Authorized Distributor |
| Model | LEO |
| 3D Resolution | 0.25 mm |
| 3D Point Accuracy | ≤ 0.1 mm |
| Accuracy Drift | ≤ 0.03% per 100 cm |
| Light Source | Dual-source — White-light LED array (12 LEDs) + VCSEL-based structured light |
| Near-range FOV | 246 × 153 mm |
| Far-range FOV | 843 × 527 mm |
| Working Distance | 0.35–1.2 m |
| Texture Capture | Yes |
| Video Frame Rate | Up to 80 FPS |
| Data Acquisition Time | 0.0002 s per frame |
| Capture Speed | Up to 4 million points/sec |
| Weight | 1.8 kg |
| Power | Integrated swappable battery or external 12 V DC supply |
| Dimensions (H×D×W) | 227 × 163 × 228 mm |
| Connectivity | Wi-Fi, Gigabit Ethernet, SD card slot |
| Onboard Processing | Yes — real-time reconstruction, no external PC required |
| Calibration | Self-calibrating |
| System Requirements | None — fully autonomous operation |
| Brand | Artec |
|---|---|
| 3D Resolution | 0.25 mm |
| 3D Point Accuracy | ≤ 0.1 mm |
| Accuracy Drift | ≤ 0.03% per 100 cm |
| Light Source | Dual-mode — White-light LED array (12 LEDs) + VCSEL-based structured light |
| Near-range FOV | 246 × 153 mm |
| Far-range FOV | 843 × 527 mm |
| Working Distance | 0.35–1.2 m |
| Texture Capture | Yes |
| Video Frame Rate | Up to 80 FPS |
| Data Acquisition Time | 0.0002 s per frame |
| Point Cloud Capture Speed | Up to 4 million points/sec |
| Weight | 1.8 kg |
| Power Supply | Internal swappable battery or external 12 V DC |
| Dimensions (H×D×W) | 227 × 163 × 228 mm |
| Connectivity | Wi-Fi, Gigabit Ethernet, SD card slot |
| Onboard Processing | Yes — real-time meshing, alignment, and texturing without external PC |
| Calibration | Self-calibrating |
| Brand | Artec |
|---|---|
| 3D Resolution | 0.25 mm |
| 3D Point Accuracy | ≤0.1 mm |
| Accuracy Drift | 0.03% per 100 cm |
| Light Sources | Dual-source — white-light 12-LED array + VCSEL 3D structured light |
| Near-range FOV | 246 × 153 mm |
| Far-range FOV | 843 × 527 mm |
| Working Distance | 0.35–1.2 m |
| Texture Capture | Yes |
| Video Frame Rate | ≤80 FPS |
| Data Acquisition Time | 0.0002 s |
| Capture Speed | ≤4 million points/sec |
| Weight | 1.8 kg |
| Power Supply | Integrated swappable battery or external 12 V DC |
| Dimensions (H×D×W) | 227 × 163 × 228 mm |
| Connectivity | Wi-Fi, Gigabit Ethernet, SD card slot |
| Onboard Processing | Yes — full real-time 3D reconstruction without external PC |
| Calibration | Self-calibrating |
| Brand | Artec |
|---|---|
| Origin | Imported (Non-China) |
| Manufacturer Type | Authorized Distributor |
| Model | LEO |
| 3D Resolution | 0.25 mm |
| 3D Point Accuracy | ≤0.1 mm |
| Accuracy Drift | ≤0.03% per 100 cm |
| Light Source | Dual-mode — White-light LED Array (12 LEDs) + VCSEL for 3D Structured Light |
| Near-Range FOV | 246 × 153 mm |
| Far-Range FOV | 843 × 527 mm |
| Working Distance | 0.35–1.2 m |
| Texture Capture | Yes |
| Video Frame Rate | ≤80 FPS |
| Data Acquisition Time | 0.0002 s per frame |
| Data Capture Speed | ≤4 million points/sec |
| Weight | 1.8 kg |
| Power | Rechargeable Internal Battery or 12 V DC Input |
| Dimensions (H×D×W) | 227 × 163 × 228 mm |
| Connectivity | Wi-Fi, Gigabit Ethernet, SD Card Slot |
| Onboard Processing | NVIDIA Tegra Platform + FPGA + 9-DOF IMU |
| Real-time Onscreen Reconstruction | Yes |
| Calibration | Self-contained, no external calibration required |
| Brand | Artec |
|---|---|
| Origin | Imported (Non-China) |
| Manufacturer Type | Authorized Distributor |
| Model | Artec Leo Handheld 3D Scanner |
| Price | Upon Request |
| Brand | Artec |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | Upon Request |
| Point Accuracy | Up to 10 µm |
| Automation Level | Fully Automatic Desktop Operation |
| Target Object Size | Small Industrial Components (Typical Scan Volume: Ø70 × 65 mm) |
| Light Source | Structured Blue LED Light |
| Primary Applications | Metrology-grade QC, Reverse Engineering, Dental CAD/CAM, Jewelry Digitization |
| Brand | Artec |
|---|---|
| Measurement Accuracy (Point) | 10 µm |
| Resolution | Up to 5 µm |
| Field of View (FOV) | 90 × 60 × 60 mm |
| Scan Speed | Up to 1.2 million points/sec |
| Light Source | Structured Blue LED Light |
| Automation Level | Fully Automatic Turntable-Based Acquisition |
| Software Platform | Artec Studio 19 (with GD&T, Inspection, Reverse Engineering Modules) |
| Compliance | CE, FCC, RoHS |
| Data Output Formats | STL, OBJ, PLY, AOP, ASC, PDF (Inspection Reports), STEP (via optional CAD plugins) |
| Brand | Artec |
|---|---|
| Origin | Imported (Designed and Manufactured in Luxembourg) |
| Certification | ISO/IEC 17025-Accredited Calibration Certificate Included |
| Accuracy | Up to 0.05 mm |
| Resolution | Up to 0.1 mm |
| Working Distance | 180–300 mm |
| Scan Speed | 7.5 fps |
| Field of View (FOV) | 190 × 145 mm |
| Light Source | Structured Blue LED Light |
| Weight | 0.85 kg |
| Operating Temperature Range | 10–35 °C |
| Data Output Formats | STL, OBJ, PLY, AOP, ASC, WRL, XYZ, PDF (3D), STEP (via optional CAD plugins) |
| Brand | Artec |
|---|---|
| Model | Space Spider |
| Measurement Principle | Structured Blue Light Triangulation |
| Accuracy | Up to 0.05 mm |
| Resolution | Up to 0.1 mm |
| Working Distance | 180–300 mm |
| Field of View (H × V) | 190 × 140 mm |
| Scan Speed | 7.5 fps |
| Texture Capture | Full-color RGB, 1.3 MP |
| Weight | 0.85 kg |
| Operating Temperature | 10–35 °C |
| Certification | CE, FCC, RoHS |
| Software Compatibility | Artec Studio (v14+), CAD Export (STEP, IGES, X_T, STL, OBJ, PLY, FBX, PDF 3D) |
| Compliance | ISO 17025 traceable calibration procedures available |
| Data Security | Local processing only |
| Brand | Artec |
|---|---|
| Technology | Blue Light Structured Light |
| Weight | 0.85 kg |
| Point Accuracy | 0.05 mm |
| Geometric Resolution | 0.1 mm |
| Texture Resolution | 1.3 MP (Full-Color) |
| Frame Rate | 7.5 fps |
| Capture Speed | Up to 1,000,000 points/sec |
| Battery Operation | Optional Artec Battery Pack (up to 6 h) |
| Software Platform | Artec Studio (with SDK support) |
| Brand | Artifex |
|---|---|
| Origin | Germany |
| Type | Import (Distributor-Sourced) |
| Model | IS |
| Construction | Semiconductor Laser–Optimized Integrating Sphere System |
| Cooling Options | Air-Cooled or Water-Cooled (Gold-Coated Models) |
| Spectral Range | 650 nm – 20 µm (Gold) / 350 nm – 1700 nm (Polymer) |
| Power Handling | Up to 5 kW/cm² (Gold, pulsed/average) |
| Interface Options | SMA or FC (standard dual-port |
| Detector Compatibility | Si, Ge, InGaAs, VIS-enhanced InGaAs, IR-extended InGaAs photodiodes |
| Internal Diameters | 10 mm, 20 mm, 50 mm, 100 mm |
| Coating | High-reflectance polymer (polymer spheres) or electroless gold (NIR–MIR spheres) |
| Compliance | Designed for ISO/IEC 17025-aligned optical calibration workflows |
| Brand | Artifex |
|---|---|
| Origin | Germany |
| Model | LDD100 |
| Output Current Range | 1–400 A (configurable variants: LDD100-40 / LDD100-120 / LDD100-200) |
| Rise Time | 50 ns (at 60 A, fast mode) |
| Pulse Width | 50 ns – 3 s |
| Pulse Repetition Rate | up to 100 kHz |
| Trigger Options | Internal / External (sequential or single-shot) |
| Interface | USB 2.0 |
| Compliance | CE, RoHS |
| Cooling | Passive (L-Version) or Active (F-Version) |
| Dimensions (Control Unit) | 250 × 235 × 150 mm |
| Input Power | 88–264 VAC, 47–63 Hz, PF ≥ 0.95 |
| Accuracy | ±2%, Repeatability: ±1%, Linearity: ±1% |
| Connector Types | LEMO for control, stripline for laser head |
| Brand | Artifex |
|---|---|
| Origin | Germany |
| Model | OPM1 |
| Type | Photodiode-based optical power meter |
| Measurement Range | 1 pW to 3 mW (typ.) |
| Wavelength Range | 190–1100 nm (Si), 800–1650 nm (InGaAs options) |
| Rise Time | 100 ns |
| NEP (RMS) | 7 µW |
| Output | Linear analog voltage (0–+4.5 V) |
| Interface | TTL-compatible modular control |
| Zero Offset Compensation | Up to ±7 V auto-zero |
| Compliance | CE, RoHS, ISO/IEC 17025 traceable calibration available |
| Brand | Artifex |
|---|---|
| Origin | Germany |
| Model | OPM150 |
| Detection Principle | Thermopile-based Absolute Power Measurement |
| Wavelength Range | 650 nm – 20 µm |
| Max. Incident Power Density | 5000 W/cm² |
| Cooling | Water-Cooled Gold-Coated Integrating Sphere |
| Interface | USB 2.0 |
| Software Mode | Real-Time Streaming, Transient Capture, Statistical Trending |
| Compliance | ISO 11554 (Laser Beam Parameter Measurements), EN 60825-1 (Laser Safety), Traceable to PTB Calibration Standards |
| Brand | Artifex |
|---|---|
| Origin | Germany |
| Model | OPM150 |
| Spectral Range | 190–2200 nm |
| Power Range | 1 nW – 20 W |
| Detector Type | Silicon, SiGe, InGaAs (multi-band) |
| Interface | USB (power + control), DB9, BNC |
| Bandwidth | 10 Hz – 100 kHz |
| Sampling Rate | 1500 S/s (direct readout), 30 S/s (GUI-controlled) |
| Gain Stages | 5 (1×, 10×, 100×, 1000×, 10000× V/mA) |
| Accuracy (Meter) | ±1% |
| Accuracy (Detector) | ±6% |
| Repeatability (Detector) | ±3% |
| Linearity (Detector) | ±0.2% |
| Response Time | 100 µs |
| Host Dimensions | 60 × 81 × 36 mm (W × L × H) |
| Detector Dimensions | Φ35 × 30 mm (D × L) |
| Calibration Data | Embedded in detector connector EEPROM |
| Software | GUI (VB.NET source included), LabVIEW® demo VI, virtual COM port command set |
| Compliance | CE, RoHS |
| Accessories | OD1–OD3 neutral density filters, SMA/FC fiber adapters, aperture reducers, lens mounts, detector heads |
| Brand | Artray |
|---|---|
| Origin | Japan |
| Model | ARTCAM-0016TNIR-TEC |
| Sensor Format | 128 × 128 InGaAs focal plane array |
| Spectral Range | 900–1700 nm |
| Cooling | Integrated TEC (Thermoelectric Cooler) |
| Detector Type | Solid-state InGaAs photodiode array |
| Compliance | CE, RoHS, JIS C 0950 |