Optical Measurement Instruments
Filter
Showing 211–240 of 3889 results
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Instrument |
| Model | PICOPOWER-RG1-1064-10K |
| Laser Type | Diode-Pumped Solid-State (DPSS) Q-Switched Laser |
| Wavelength | 1064 nm |
| Repetition Rate | 10 kHz |
| Pulse Duration | <15 ps |
| Output Configuration | TEM₀₀ |
| Cooling | Air-Cooled |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 Laser Product |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Model | PULSELABS-A-1064-10W-SF |
| Wavelength | 1064 nm (fundamental), optional harmonics at 532 nm / 355 nm / 266 nm |
| Pulse Energy | 1 mJ @ 1064 nm |
| Average Power | 10 W @ 1064 nm |
| Peak Power | 80 kW @ 1064 nm |
| Spectral Linewidth | < 40 MHz |
| Pulse Duration | Nanosecond range (typ. 10–15 ns) |
| Beam Quality | Near-diffraction-limited (M² < 1.3) |
| Operation Mode | Single longitudinal mode (SLM) |
| Control Interface | Ethernet-enabled remote control |
| Laser Type | Diode-pumped solid-state (DPSS), Q-switched, microchip architecture |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | PULSELAS-A-1064-10W-SF |
| Wavelength | 1064 nm |
| Average Output Power | 10 W |
| Pulse Width (FWHM) | <1 ns (typ.) |
| Repetition Rate | Up to 10 kHz (adjustable) |
| Beam Quality (M²) | 1.01 (ISO 11146) |
| Beam Parameter Product (BPP) | 0.338 mm·mrad |
| Divergence (Full Angle, eff.) | 1.08 mrad |
| Side-Mode Suppression Ratio (SMSR) | >25 dB |
| Long-Term Power Stability (8 h) | <±0.5% RMS |
| Beam Pointing Stability (8 h) | <5 µrad RMS |
| Polarization | Linear, >100:1 |
| Cooling | Water-cooled |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 Laser Product |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Model | PULSELAS-A-1064-10W-SF |
| Wavelength (fundamental) | 1064 nm |
| Pulse Energy (1064 nm) | 1 mJ |
| Average Power (1064 nm) | 10 W |
| Peak Power (1064 nm) | >80 kW |
| Pulse Width (FWHM, 1064 nm) | <12 ns |
| Repetition Rate | 10 kHz |
| Spectral Linewidth (1064 nm) | <40 MHz |
| Beam Quality (M², 1064 nm) | <1.2 |
| Power Stability (RMS) | ≤1% |
| Polarization Ratio (1064 nm) | >100:1 |
| Beam Diameter (1/e², 1064 nm) | 1.4 mm ±10% |
| Beam Divergence (1064 nm) | 1.0 mrad ±10% |
| Harmonic Options | 532 nm / 355 nm / 266 nm |
| Remote Control Interface | Ethernet (LAN, RJ-45) |
| Cooling | Closed-loop liquid cooling |
| Warm-up Time to 95% Output | <5 min |
| Operating Temperature | 20–28 °C |
| Compliance | ISO 11146 (beam quality), IEC 60825-1 (laser safety), CE-marked |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | PULSELAS-P |
| Wavelength | 1064 nm |
| Pulse Width | < 1 ns (typ. 800 ps) |
| Pulse Energy | up to 1500 µJ @ 100 Hz |
| Peak Power | > 1.5 MW |
| Average Power | up to 1 W |
| Repetition Rate | up to 100 kHz |
| Beam Quality | TEM₀₀ |
| Polarization Ratio | > 100:1 |
| Power Stability | < 2% RMS (1 h) |
| Output Beam Diameter | 0.3–0.4 mm |
| Beam Divergence | ~6 mrad |
| Laser Head Dimensions | 40 × 52 × 90 mm or 40 × 52 × 140 mm (HP/HE variants) |
| Harmonic Options | 532 nm, 355 nm, 266 nm (optional) |
| Triggering | Internal frequency generator (up to 5 kHz) and external TTL trigger standard |
| Pump Configuration | Free-space or fiber-coupled laser diode (LDF-30-P) |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | PULSELAS-P-1064-100 |
| Wavelength | 1064 nm |
| Pulse Width | <1 ns (sub-nanosecond) |
| Peak Power | 100 MW |
| Laser Type | Diode-Pumped Passive Q-Switched Microchip Solid-State Laser |
| Output | TEM₀₀, Polarized, Collimated Free-Space Beam |
| Repetition Rate | Up to 100 kHz (model-dependent) |
| Pulse Energy | Up to 10 µJ (typical at 10 kHz) |
| Beam Diameter | ~0.8 mm (1/e²) |
| Divergence | <2 mrad |
| Cooling | Conductive (thermoelectric or passive) |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 Laser Product |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Model | RG1-1064-10K |
| Wavelength | 1064 nm (fundamental), optional harmonics at 532 nm / 355 nm / 266 nm |
| Pulse Width | <30 ps (FWHM) |
| Pulse Energy | 50 µJ @ 1064 nm |
| Peak Power | >2 MW @ 1064 nm |
| Timing Jitter | 3.5 ps RMS to external trigger |
| Repetition Rate | Adjustable |
| Beam Profile | Gaussian TEM₀₀ |
| Cooling | Air-cooled |
| Form Factor | Compact, OEM-integrated design |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | UPD Series |
| Spectral Range | 170–2600 nm |
| Rise Time | 15 ps to 75 ns |
| Bandwidth | DC to 25 GHz |
| Detector Materials | Si, GaAs, InGaAs, Ge |
| Input Options | Free-space (polished/diffuse MgF₂/quartz/glass windows), FC/PC fiber receptacle, or FC/APC-pigtailed fiber |
| Output Interface | SMA or BNC |
| Power Supply | Battery or external DC source |
| Housing | Anodized aluminum, hermetically sealed |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Model | UPD |
| Spectral Range | 170–2600 nm |
| Rise Time | 15–500 ps |
| Bandwidth | DC to 25 GHz |
| Detector Materials | Si, GaAs, InGaAs, Ge |
| Optical Input | Free-space (polished/diffuse MgF₂/quartz/glass windows), FC/PC, or fiber-coupled (9 µm SMF) |
| RF Output Connector | SMA or BNC |
| NEP | 1.0 × 10⁻¹⁵ – 7.0 × 10⁻¹³ W/√Hz |
| Dark Current | 0.001–2000 nA |
| Sensitive Area | 55–2000 µm diameter (0.0024–3.14 mm²) |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | UPD Series Ultrafast Photodetectors |
| Rise Time | 15 ps – 75 ns |
| Bandwidth | DC to 25 GHz |
| Spectral Range | 170–2600 nm |
| Detector Materials | Si, GaAs, InGaAs, Ge |
| Output Interface | SMA or BNC |
| Housing | Anodized Aluminum |
| Power Supply | Battery or External DC |
| Brand | Alphalas |
|---|---|
| Model | UPD-15-IR2-FC |
| Detector Material | InGaAs |
| Spectral Range | 800–1700 nm |
| Rise Time | <15 ps |
| 3-dB Bandwidth | >25 GHz |
| Active Area | Fiber-coupled, 9 µm core |
| Quantum Efficiency @ Peak | 75% |
| NEP | 1.0×10⁻¹⁵ W/√Hz |
| Dark Current | 0.1 nA |
| Optical Input | FC/APC fiber connector |
| RF Output | SMA |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Model | UPD-35-IR2-FR |
| Spectral Range | 800–1700 nm |
| Photosensitive Material | InGaAs |
| Rise Time | <35 ps |
| Bandwidth | >10 GHz |
| Active Area | 9 µm fiber core |
| Dark Current | 0.3 nA |
| Optical Input | Fiber with FC/APC connector |
| RF Output | SMA |
| Housing | Anodized aluminum |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ORIGAMI-15 / ORIGAMI-10 / ORIGAMI-8 / GENKI-10 / GENKI-15 / GENKI-10-HPNd / GENKI-10-HPYb / SUMO-10 / SUMO-15 / PiLas PILxxx / PILxxxF |
| Output Wavelength | 375–1550 nm (model-dependent) |
| Pulse Width | <12 ps (PiLas) to <170 fs (ORIGAMI) |
| Repetition Rate | 1 Hz–100 MHz (configurable) |
| Average Power | 10 mW–1.5 W |
| RMS Amplitude Noise | <0.1% (ORIGAMI), <0.5% (GENKI/SUMO/PiLas) |
| RMS Timing Jitter | <35 fs (synchronized), <100 fs (free-running) |
| Beam Quality (M²) | <1.1 |
| Polarization Extinction Ratio | >23 dB (ORIGAMI), >13 dB (SUMO), linear polarization standard |
| Cooling | Passive air-cooled, no TEC or forced-air required |
| Warm-up Time | <10 min |
| Operating Temperature | 10 °C–40 °C |
| Dimensions (L×W×H) | 250–300 × 112–260 × 48–54 mm³ |
| Power Supply | 90–264 VAC, 47–63 Hz or 5–24 VDC (model-specific) |
| Brand | ALS GmbH / Advanced Laser Diode Systems |
|---|---|
| Origin | Germany |
| Type | Imported OEM Laser Source |
| Model | PiLas |
| Wavelength Range | 375 nm – 2000 nm |
| Pulse Width | 20 ps – 150 ps (up to 5 ns depending on configuration) |
| Repetition Rate | Single-shot to 120 MHz, continuously adjustable |
| Peak Power | 20 mW – 1 W |
| Average Power (at 100 MHz) | 0.5 mW – 2 mW |
| Pulse Energy | 1 pJ – 50 pJ |
| Beam Quality | M² < 1.1, TEM₀₀ |
| Polarization Extinction Ratio | > 20 dB |
| Timing Jitter | < 3 ps (rms) |
| Output | Free-space or fiber-coupled (SM/PM/MM) |
| Cooling | Air-cooled |
| Control Interface | RS232 or USB |
| Dimensions (Laser Head) | 97 × 31 × 147 mm³ |
| Weight (Laser Head) | 0.45 kg |
| Warm-up Time | < 10 min |
| Operating Temperature | 15 °C – 35 °C |
| Storage Temperature | −20 °C – 65 °C |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Pilas |
| Price Range | USD 7,000 – 14,000 |
| Core Components | Semiconductor laser diode module with integrated driver, thermal management, and precision timing electronics |
| Brand | A.L.S. GmbH / Advanced Laser Diode Systems |
|---|---|
| Origin | Germany |
| Model | PiLas Series |
| Wavelength Range | 375–2000 nm |
| Pulse Width | 20 ps – 1 ns (variable) |
| Peak Power | 20–1000 mW |
| Repetition Rate | Single-shot to 120 MHz |
| Output | Free-space or fiber-coupled (SMF/MMF) |
| Polarization Extinction Ratio | >23 dB |
| Timing Jitter | <3 ps RMS |
| Warm-up Time | <5 min |
| Laser Head Dimensions | 95 × 31 × 147 mm³ |
| Control Unit Dimensions | 235 × 88 × 326 mm³ |
| Options | DFB narrow-linewidth variants, TTL/NIM trigger conversion, thermal wavelength tuning, OEM single-box integration |
| [Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ALS-IR Series |
| Output Power | Up to 50 W (wavelength-dependent) |
| Linewidth | Down to 50 kHz (single longitudinal mode) |
| Wavelength Drift | < 0.05 pm over several hours |
| Beam Mode | TEM₀₀ |
| Cooling | Conduction-cooled, no external chiller required |
| Maintenance | Maintenance-free, >100,000 h diode lifetime |
| Compliance | RoHS, CE, IEC 60825-1 Class 4 Laser Product] |
| Key | Origin: USA |
|---|---|
| Type | Fiber-Based CW Laser System |
| Wavelength Options | 488 nm, 515 nm, 532 nm |
| Linewidth | ≤100 kHz (single longitudinal mode) |
| Output Power | Up to 10 W (diffraction-limited, TEM₀₀) |
| Wavelength Drift | <0.1 pm over several hours |
| Cooling | Passive (fanless, chiller-free optical head) |
| Configurations | Single-wavelength (ALS-VISIBLE) or multi-wavelength (ALS-OCEAN, up to 3 wavelengths in one head) |
| Beam Delivery | Collinear or parallel multi-port (2/4/8/16 outputs available) |
| Compliance | Designed for OEM integration and laboratory-grade metrology applications |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PiLas |
| Core Components | Semiconductor Laser Diode Module with Integrated Driver and Cooling |
| Brand | TP |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | WSZ-810 |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Type | In-line refractometer |
| Model | 614 |
| Measurement Range | 1.3000–1.6000 RIU (Refractive Index Units) |
| Accuracy | ±0.5% of full scale |
| Temperature Compensation | Automatic, -25°C to +150°C |
| Process Pressure Rating | Up to 1000 PSIG (68 bar) |
| Prism Material | Sapphire |
| Output Signals | 4–20 mA, 0–10 VDC (refractive index and temperature) |
| Communication Interfaces | RS-232, dual RS-485 (up to 3 km remote operation) |
| Cable Length | Up to 500 m |
| Display | Backlit LCD with 5-touch-button interface |
| Alarm Functions | Two independent alarms (out-of-range and system fault) |
| Power Supply | 230 VAC, 50 Hz, <25 W |
| Brand | Ampliconyx |
|---|---|
| Origin | Finland |
| Model | TGMA-PM |
| Core Technology | Patented Polarization-Maintaining Tapered Yb-Doped Double-Clad Fiber |
| Wavelength Range | 1030–1065 nm |
| Pump Wavelength | 976 nm |
| Mode Field Diameter | 40 µm |
| PER | 13–15 dB |
| M² | ≤1.3 |
| Core Diameter (thin/thick end) | 29/48 µm |
| Cladding Diameter (thin/thick end) | 275/380 µm |
| Fluorine-Doped Cladding Diameter (thin/thick end) | 285/430 µm |
| Cladding Absorption @976 nm | 25 dB/m |
| Gain Fiber Length | 2.5 m |
| Input Fiber | 10/125 PM (standard) |
| Max Pump Power (free-space) | 250 W |
| Max Output Power | 150 W |
| Cooling Options | Active water-cooled fiber mount & thermal platform |
| Brand | Amplitude |
|---|---|
| Origin | France |
| Product Type | MOPA-based Pulsed Laser Amplifier |
| Model Series | Agilite |
| Wavelength Options | 1064 nm / 532 nm (Nd:YAG & Nd:YLF) |
| Pulse Width Range | Agilite: 30 ns – 10 µs |
| Intrepid | 300 ps – 15 ns |
| Output Energy | Up to 4 J per pulse |
| Beam Diameter | 6 mm / 9 mm / 12 mm |
| Beam Quality | M² < 1.7 |
| Spectral Linewidth | < 2× transform-limited |
| Pulse-to-Pulse Stability | < 2.5% RMS |
| Timing Jitter | < 2 ns RMS |
| Repetition Rate | 1–20 Hz |
| Harmonic Generation | Standard SHG option available |
| Application Role | Seed source for multi-stage amplifier systems (e.g., Nd:glass amplifiers) |
| Compliance | Designed for integration into ISO/IEC 17025-compliant laser laboratories and high-energy physics testbeds |
| Brand | Amplitude |
|---|---|
| Country of Origin | France |
| Model | MANGO |
| Output Wavelength Range | 210 nm – 11,000 nm |
| Tuning Mechanism | Fully Automated Motorized OPA Stages |
| Pulse Duration Options | Standard (MANGO), Short-Pulse (MANGO SP), High-Energy (MANGO HE) |
| Repetition Rate Compatibility | Up to 2 MHz |
| Cooling Method | Air-Cooled |
| Enclosure | Sealed, Dust-Protected Industrial Housing |
| Polarization Maintenance | Single Output Port with Consistent Linear Polarization |
| Compliance | Designed for ISO 13406-1–compliant laser safety integration |
| Brand | Amplitude |
|---|---|
| Origin | France |
| Model | Premiumlite |
| Type | Solid-State Diode-Pumped Disk Amplifier Laser System |
| Output Wavelengths | 1064 nm / 532 nm (YAG), 1053 nm / 527 nm (Glass) |
| Repetition Rate | Up to 10 Hz (YAG), up to 0.1 Hz (Glass) |
| Pulse Energy | Up to 75 J @ 1064 nm (YAG), up to 260 J @ 1053 nm (Glass) |
| Beam Profile | Circular, Super-Gaussian (≥20th order) |
| Beam Diameter | 44 mm ± 2.5 mm (YAG), 80 mm ± 2.5 mm (Glass) |
| Pulse Width | 6 ns ± 2 ns (YAG), 20 ns ± 2 ns (Glass) |
| RMS Pulse Stability | <1% (1064 nm), <1.5% (532 nm) for YAG |
| Pointing Stability | ≤50 µrad |
| Divergence | ≤500 µrad |
| Polarization | Linear or Circular |
| Long-Term Stability | ≤3% p-v (8 h, YAG), ≤5% p-v (8 h, Glass) |
| Brand | Amplitude |
|---|---|
| Origin | France |
| Model | Satsuma |
| Laser Type | Solid-State Femtosecond Oscillator-Amplifier System |
| Cooling | Air-Cooled |
| Average Power | Up to 20 W |
| Pulse Energy | Up to 150 µJ |
| Repetition Rate | High (Multi-kHz to MHz range) |
| Pulse Duration | <500 fs (standard), optional <100 fs configurations |
| Output Options | Fundamental IR (1030 nm), SHG (515 nm), UV (343 nm), Deep UV (257 nm) |
| Triggering | FemtoTrig™ single-pulse selection |
| Burst Mode | FemtoBurst™ (adjustable pulse count, inter-pulse spacing 25–100 ns) |
| Synchronization | SuperSync Control for sub-100 ps timing jitter with external scanners or diagnostics |
| Compliance | CE-marked, RoHS-compliant, designed for 7×24 industrial operation |
| Certifications | ISO 9001 manufacturing environment, compatible with GLP/GMP-aligned lab infrastructure |
| Brand | Amplitude Systems |
|---|---|
| Origin | France |
| Model | Fiber Lasers_Satsuma |
| Cooling | Air-cooled |
| Output Type | Ultrafast Femtosecond Fiber Laser |
| Pulse Energy | Up to 150 µJ |
| Repetition Rate | High (Configurable, up to MHz range) |
| Pulse Width | <500 fs (standard), optional <100 fs configurations |
| Optional Wavelengths | Fundamental IR (1030–1080 nm), SHG (515–540 nm), UV (343–360 nm), Deep UV (~257 nm) |
| Burst Mode | FemtoBurst™ (adjustable pulse count, inter-pulse spacing 25–100 ns) |
| Triggering | FemtoTrig™ (single-pulse selection on demand) |
| Synchronization | SuperSync Control for sub-nanosecond timing with high-speed scanners and external systems |
| Industrial Grade | 7×24 operation certified |
| Compliance | CE, RoHS, IEC 60825-1 (Laser Safety Class 4) |
| Software Interface | Ethernet + USB + TTL I/O |
| Footprint | Compact, benchtop-integrated design |
| Brand | Amplitude Systems |
|---|---|
| Origin | France |
| Model | Tangerine_Fiber lasers |
| Pulse Energy | up to 250 µJ |
| Repetition Rate | up to 40 MHz |
| Pulse Duration | < 150 fs |
| Output Type | Fiber-delivered ultrafast laser system |
| Optional Modules | SHG/THG, Mango OPA, Nonlinear Pulse Compression, GLASS Transparent Material Processing Kit |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | Amplitude Systems |
|---|---|
| Origin | France |
| Model | YUJA |
| Type | Industrial-grade femtosecond oscillator with optional harmonic generation and OPA integration |
| Pulse Energy | Up to >10 µJ (configurable) |
| Repetition Rate | Adjustable up to 40 MHz |
| Pulse Duration | <500 fs (standard), optionally <100 fs with nonlinear compression |
| Output Wavelength | Fundamental IR (~1030–1050 nm), optional SHG (515–525 nm) and THG (343–350 nm) |
| Beam Quality | M² < 1.2 |
| Stability | RMS power fluctuation < 0.5% over 8 h |
| Cooling | Air-cooled or optional water-cooling |
| Footprint | < 280 × 220 × 120 mm |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 laser product |
| Brand | Amplitude |
|---|---|
| Origin | France |
| Model | Tangerine |
| Laser Type | Solid-State Femtosecond Oscillator + Amplifier System |
| Max. Pulse Energy | 250 µJ |
| Repetition Rate | Up to 40 MHz (user-adjustable) |
| Pulse Duration | <150 fs (compressible to <10 fs with optional nonlinear compression) |
| Optional Modules | Mango OPA, SHG/THG Harmonic Generators, GLASS Transparent-Material Processing Unit, Nonlinear Pulse Compression, Synchrolock Synchronization Interface |
| Compliance | CE, RoHS, IEC 60825-1 (Class 4 Laser Product) |