Physical Property Testing Instruments
Filter
Showing 1–30 of 4349 results
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Max Load Capacity | 100 kg |
| Frequency Range | 1–600 Hz (standard), optional 1–5000 Hz |
| Displacement Amplitude | 0–5 mm peak-to-peak |
| Max Acceleration | 20 g |
| Vibration Axes | Vertical + Horizontal (X/Y/Z orthogonal triaxial capability) |
| Waveform | Sinusoidal, AM-modulated, Swept Sine, Logarithmic Sweep, Programmable Multi-segment Profile (up to 15 segments, max 65,500 s per segment) |
| Control Interface | RS-485 (PC-compatible, optional real-time remote control, data logging & report generation) |
| Timer/Counter | Dual-mode independent timing (1 s – 1 year) and cycle counting |
| Power Supply | 220 V / 380 V AC, 50/60 Hz |
| Motor Power | 2.2 kW / 3.8 kW |
| Worktable Dimensions | 50 cm × 50 cm (customizable up to 120 cm × 120 cm) |
| Table Material | High-strength Al-Mg alloy die-cast structure with anodized surface finish |
| Mounting Thread Protection | Stainless steel or high-tensile alloy insert sleeves for M6–M10 threaded holes |
| Isolation System | High-damping elastomeric isolator feet (resonance suppression compliant with ISO 2041 & ASTM D999) |
| Brand | OEM |
|---|---|
| Max Load Capacity | 100 kg |
| Table Surface Dimensions (L×W) | 50 × 50 cm |
| Vibration Axes | Vertical (Z) + Horizontal (X/Y) |
| Frequency Range | 1–600 Hz (optional up to 5 kHz) |
| Max Acceleration | 20 g |
| Max Displacement (p-p) | 5 mm |
| Waveform | Sinusoidal |
| Drive Power | 2.2 kW |
| Control Interface | RS-485 (external controller required) |
| Frequency Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Input Voltage | 220 V ±20% |
| Max Current | 5 A |
| Compliance | Designed for ISO 10816, ASTM D999, MIL-STD-810H vibration profile execution |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HEMS & LT-AC/DC |
| Pricing | Upon Request |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LT-AFM/MFM |
| Price | Upon Request |
| Operating Temperature Range | 20 mK – 300 K |
| Magnetic Field Capability | Up to 16 T |
| Displacement Noise Floor | 15 fm/√Hz (fiber interferometer, standard configuration) |
| Magnetic Resolution | 10 nm at 4 K |
| Interferometer Wavelength | 1310 nm |
| Fabry–Pérot Interferometer Noise Floor | 1 fm/√Hz (4–300 K) |
| Theoretical Shot-Noise Limit | 0.51 fm/√Hz |
| Scan Head Z-Range | 10 mm (stick-slip piezo stage) |
| XY Travel | Ø3 mm |
| Positioning Sensitivity | 50 nm |
| Scan Area Options (X×Y×Z @ Temp) | Ultra-Large: 200×200×7.2 µm @ 300 K, 50×50×4.8 µm @ 77 K, 30×30×2.4 µm @ 4.2 K |
| Large | 150×150×7 µm @ 300 K, 36×36×1.8 µm @ 77 K, 18×18×0.8 µm @ 4.2 K |
| Standard | 52×52×4.8 µm @ 300 K, 14×14×1.2 µm @ 77 K, 6×6×0.5 µm @ 4.2 K |
| Cantilever Alignment | Tri-point alignment chip (compatible with commercial cantilevers, no optical alignment required) |
| Scanner Architecture | Dual concentric piezotubes — inner tube for scanning, outer tube for coarse sample positioning |
| Scanner Electrodes | Quadrant electrodes + integrated excitation piezo for cantilever actuation |
| Signal Output | Analog BNC outputs (deflection, error, Z-feedback), LEMO interface to microscope control unit |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LT-APO OBJECTIVES |
| Price | Upon Request |
| Clear Aperture (CA) | 4.7 mm |
| Focal Length (FL) | 2.8–2.9 mm |
| Numerical Aperture (NA) | 0.82 |
| Working Distance (WD) | 0.95 mm (up to 1.45 mm depending on configuration) |
| Transmission Coating | Broadband AR coating (>80% average transmission) |
| Spectral Range (Visible-NIR) | 400–1000 nm |
| Apochromatic Correction Range (Df < ±1 D) | 540–780 nm (visible), 650–970 nm (NIR), and 930–1365 nm (IR) |
| Environmental Rating | Designed for cryogenic temperatures, high magnetic fields (≥16 T), and ultra-high vacuum (UHV, ≤10⁻⁹ mbar) |
| Physical Dimensions | Ø24 mm × 49 mm L |
| Mass | 46 g |
| Mount Thread | RMS (0.80″ × 36 TPI, 3 mm engagement depth) |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LT-SHPM/STM |
| Price | Upon Request |
| Max Applied Magnetic Field | ~16 T |
| Operating Temperature Range | 10 mK to 300 K |
| Hall Probe Resolution | ~1 µm |
| STM Resolution | Atomic-scale |
| Scan Ranges (XYZ @ Temp) | 200×200×7.2 µm @ 300 K |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Model | MK-CONFOCAL/RAMAN MICROSCOPE (MK-CFM/RAMAN) |
| Objective | 0.82 NA, 0.95 mm working distance, cryo-compatible APO objective |
| Temperature Range | 10 mK to 300 K |
| Magnetic Field Compatibility | Up to 31 T |
| Scan Range | 50 × 50 × 25 µm @ 300 K / 30 × 30 × 15 µm @ 4 K |
| Sample Approach Range | XYZ ±6 × ±6 × ±12 mm, step size 50–700 nm |
| Closed-Loop Positioning | Resistive encoder, 200 nm resolution |
| Fine Scan Range | 7.5 µm @ 300 K / 1 µm @ 4.2 K |
| Max Sample Dimensions | 10 × 10 × 5 mm |
| Sample Holder | 8-pin electrical interface |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PIEZO ROTATOR |
| Price | Upon Request |
| Dimensions (L×W×H) | 35 mm × 35 mm × 11.5 mm |
| Weight | 65 g |
| Clear Aperture | 13 mm |
| Body Material | Titanium Alloy & Beryllium Copper (or Beryllium Copper Only for mK Operation) |
| Actuator | PZT Piezoceramic |
| Cabling | Insulated Twisted Pair — Copper for PZT, Phosphor Bronze for Resistive Sensor |
| Coarse Travel Range (Stepping Mode) | 360° Continuous |
| Max. Drive Speed (300 K) | ~32°/s |
| Input Voltage Range (PZT) | 0–60 V |
| Fine Angular Positioning Range (300 K) | 40 m° |
| Fine Angular Positioning Range (4 K) | 6 m° |
| Fine Positioning Resolution | µ° |
| DC Input Voltage Range (Sensor) | 0–100 V (300 K), 0–150 V (4 K) |
| Encoder Type | Cermet Resistive Sensor |
| Encoder Travel Range | 315° |
| Encoder Resolution | ~5 m° |
| Encoder Power Consumption (Active) | 10–100 µW |
| Repeatability (Unidirectional) | ±45 m° |
| Max. Static Load (RT) | 200 g |
| Max. Dynamic Torque about Axis | 2 N·cm |
| Environmental Compatibility | Ambient Temperature, Cryogenic (Down to 4 K), Ultra-High Vacuum (UHV), Bakeable to 100 °C |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NMI-VSM |
| Price | Upon Request |
| Sensitivity (RMS) | 5×10⁻⁷ emu |
| Oscillation Frequency Range | 1–100 Hz (calibrated) |
| Oscillation Amplitude Range | 0.1–5 mm |
| Maximum Sample Diameter | 6 mm |
| Temperature Range | 2 K to 1000 K |
| Magnetic Field Range | Up to 2.5 T (electromagnet), up to 14 T (with cryostat) |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NV-CENTRE CONFOCAL MICROSCOPY |
| Price | Upon Request |
| Objective NA | 0.82 |
| Working Distance | 0.95 mm @ 532 nm |
| Laser Source | SLM-stabilized 10 mW @ 532 nm |
| Scan Range | 30 × 30 × 15 µm at 4 K |
| Outer Diameter | 49 mm |
| Temperature Range | 10 mK – 300 K |
| Detector | Avalanche Photodiode (APD) |
| Sample Stage | XYZ Nanopositioning Platform, 6 × 6 × 12 mm travel |
| NV/QTF Sensor Stage | XYZ Nanopositioning Platform, 4 × 4 × 6 mm travel |
| Position Sensor Resolution | 200 nm |
| Controller | Ultra-low-noise FPGA-based AFM controller with high-speed USB interface |
| Real-time Processor | 32-bit, 128 MB DDR SDRAM |
| ADC | Dual-channel, 16-bit / 100 MHz |
| DAC | Dual-channel, 16-bit / 100 MHz |
| PID Loops | Seven digital PID controllers implemented on FPGA |
| Piezo Controller Channels | 19-channel |
| High-resolution ADC | 16-channel, 24-bit / 175 kHz |
| Scan Signal DAC | 24-bit XYZ output |
| High-voltage Amplifier | Low-noise design |
| Brand | 3M |
|---|---|
| Model | 6006 |
| Compliance | China LA Certification (LA-2021-XXXXX) |
| Interface | 3M 1/4-turn bayonet mount |
| Construction | Polypropylene housing with impregnated activated carbon and chemisorbent layers |
| Shelf Life | 5 years (unopened, stored per manufacturer guidelines) |
| Configuration | Twin-pack (2 units per pouch, 30 pouches per case) |
| Intended Use | Respiratory protection against organic vapors, chlorine, chlorine dioxide, hydrogen chloride, sulfur dioxide, hydrogen fluoride, and hydrogen sulfide |
| Brand | 3M |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | QT-36 |
| Pricing | Available Upon Request |
| Brand | 3M |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | QT-36 |
| Pricing | Available Upon Request |
| Brand | 3nh |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | NQ-10-100A (Standard ISO 12233, 1×) / NE-10-100A (Enhanced ISO 12233, 1×) |
| Material | High-resolution photographic paper, semi-matte surface finish |
| Active Area Dimensions | 200 mm × 356 mm |
| Contrast | Normative (ISO 12233-compliant 4:1 luminance ratio) |
| Compliance | ISO 12233:2017 “Photography — Electronic still picture imaging — Resolution and spatial frequency responses” |
| Brand | 3P Instruments |
|---|---|
| Origin | Germany |
| Model | mixSorb L |
| Maximum Adsorption Pressure | 68 bar |
| Number of Mass Flow Controllers (MFCs) | 4 |
| Detector Type | TCD (Thermal Conductivity Detector) |
| Column Dimensions (Standard) | 30 mm ID × 200 mm length |
| Gas Range | Customizable |
| Column Configuration | Customizable |
| Temperature Pre-treatment Range | Up to 400 °C |
| Heating Rate | Up to 10 K/min |
| Software | mixSorb Manager & 3P sim |
| Compliance | Designed for GLP/GMP-aligned operation with audit-trail-capable data logging |
| Brand | 3P Instruments |
|---|---|
| Origin | Germany |
| Model | mixSorb S |
| Maximum Adsorption Pressure | 68 bar |
| Mass Flow Controllers (MFCs) | 4 |
| Detector | TCD (Thermal Conductivity Detector) |
| Temperature Control | Up to 400 °C pre-treatment, Linear Heating Rate: 10 K/min |
| Software | mixSorb Manager (real-time control & programmable operation), 3P sim (data fitting, breakthrough curve simulation, multicomponent adsorption modeling, selectivity/affinity/kinetics calculation) |
| Brand | A.Krüss / A.Krüss Optronic |
|---|---|
| Origin | Germany |
| Model | DS7800 |
| Instrument Type | Laboratory Benchtop Oscillating U-Tube Densimeter |
| Sample Type | Liquid |
| Density Range | 0.0000–1.9999 g/cm³ |
| Density Accuracy | ±0.0001 g/cm³ |
| Temperature Control Range | 10–40 °C |
| Minimum Sample Volume | 2 mL |
| Compliance | ASTM D4052-18, ASTM D5002, ISO 12185:1996, ISO 2811-3:2011, SH/T 0604-2000, GB/T 21862.3-2008 |
| Brand | A.KRÜSS / A.KRÜSS Optronic |
|---|---|
| Origin | Germany |
| Model | M5000 |
| Temperature Range | 25–400 °C |
| Heating Rate | 1 °C/min |
| Temperature Repeatability | ±0.2 °C |
| Temperature Accuracy | ±0.3 °C (25–200 °C), ±0.5 °C (200–400 °C) |
| Capillary Diameter | 1.4 mm |
| Sample Capacity | 1 capillary per measurement |
| Temperature Resolution | 0.1 °C |
| Cooling | Integrated fan-assisted cooling |
| Safety Rating | IP20 |
| Dimensions (L×W×H) | 230 × 210 × 110 mm |
| Weight | 1.8 kg |
| Power Supply | 85–264 V AC, 47–440 Hz |
| Interface | RS-232 |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | AD-3253 / AD-3253B |
| Measurement Principle | Ultrasonic Pulse-Echo |
| Thickness Range (AD-3253) | 2.0–200.0 mm |
| Thickness Range (AD-3253B) | 0.8–100.0 mm |
| Accuracy | ±0.1 mm ±1.0% (AD-3253, 2–100 mm) / ±0.1 mm ±0.5% (AD-3253B, 0.8–40 mm) |
| Resolution | 0.1 mm |
| Display | LCD |
| Units | mm / inch |
| Sound Velocity Adjustment | Yes |
| Sampling Rate | 4 Hz |
| Operating Temperature | 0°C to 50°C |
| Power | 2 × AA alkaline batteries |
| Battery Life | ~30 hours |
| Weight | 180 g |
| Dimensions | 68 × 120 × 27 mm |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | AD-4971 |
| Detection Aperture | 350 mm (W) × 80 / 150 / 230 mm (H) |
| Detection Sensitivity | Fe Ø0.3–0.7 mm |
| Conveyor Belt Width | 250 mm |
| Belt Length | 800 mm |
| Belt Speed | 10–60 m/min |
| Display | 7-inch color TFT LCD touchscreen |
| IP Rating | IP65 |
| Communication | Modbus RTU/TCP standard |
| Data Output | Ethernet + USB storage (PDF reports, histograms, X̄-R charts, trend plots) |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | EJ-120D |
| Weighing Capacity | 120 g |
| Readability | 0.01 g |
| Density Resolution | 0.01 g/cm³ |
| Repeatability | 0.01 g |
| Pan Size | 110 mm |
| Display | Backlit LCD, 16 mm digit height |
| Interface Options | RS-232 or driver-free USB |
| Power Supply | AC adapter and rechargeable battery dual mode |
| Compliance | GLP/GMP/GCP and ISO-compliant calibration reporting |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | EK-300iD / EK-3000iD |
| Instrument Type | Benchtop Solid Density Analyzer |
| Measurement Principle | Archimedean Buoyancy Method (Air Weight / (Air Weight − Immersed Weight) × Reference Liquid Density) |
| Density Range | 0–2.000 g/cm³ |
| Density Resolution | 0.001 g/cm³ (EK-300iD) / 0.01 g/cm³ (EK-3000iD) |
| Temperature Range | 0–100 °C |
| Minimum Sample Mass | 0.001 g |
| Reference Liquids | Water, Kerosene, or User-Defined Liquids (Density Input Range: 0.000–2.000 g/cm³) |
| Temperature Compensation | Automatic |
| Data Storage | 200 Records |
| Interface | RS-232 |
| Compliance | GLP/GMP/GCP Audit Trail Ready, ISO/IEC 17025 Support Enabled |
| Software | WinCT Data Acquisition Suite (Windows-compatible, Excel export, statistical analysis, graphing) |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | MCT-1150 |
| Type | Electromechanical Universal Testing Machine |
| Maximum Load Capacity | 2.5 kN |
| Effective Travel | 850 mm (STB-1225L) / 550 mm (STB-1225S) |
| Crosshead Speed Range | 0.05–1000 mm/min (adjustable in 0.01 mm/min increments) |
| Speed Accuracy | ±0.5% |
| Load Measurement Accuracy | ±1% of reading (within 1/1 to 1/500 of sensor rated capacity) |
| Automatic Load Range Switching | Up to 128× |
| Load Calibration | One-touch electronic calibration with integrated sensor diagnostics |
| Overload Protection | Yes |
| Travel Limiters | Dual-position (upper/lower) mechanical stops |
| Position Resolution | 0.001 mm (≤10 mm), 0.01 mm (>10 mm) |
| Dimensions (L×H×W) | 470 × 1450 × 335 mm (STB-1225L) / 470 × 1050 × 335 mm (STB-1225S) |
| Weight | 56 kg / 43 kg |
| Power Supply | AC 100 V, 1Φ, 50/60 Hz |
| Power Consumption | 350 VA |
| Operating Environment | 5–40 °C, 20–80 % RH |
| Data Acquisition Rate | 0.2 ms (with TACT interface) |
| Display | Optional full-color touchscreen interface |
| Control | PC-based test setup and execution |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | RTF Series |
| Load Capacity Range | 1 kN to 50 kN |
| Load Accuracy | ±0.5% of reading |
| Crosshead Speed Range | 0.0005–1000 mm/min |
| Speed Accuracy | ±0.1% |
| Sampling Interval | 1 ms |
| Load Frame Rigidity Increase | 30% vs. prior generation |
| Drive System | Brushless digital servo motor with closed-loop microcomputer control |
| Force Sensor | ORIENTEC high-precision transducer |
| Lead Screw | High-accuracy backlash-free ball screw |
| Input Channels | Up to 13 analog/digital signal inputs |
| Compliance | Meets JIS B 7721 Class 0.5 (equivalent to ISO 7500-1 Class 0.5 and ASTM E4) |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Type | Electromechanical Universal Testing Machine |
| Model | RTF |
| Load Accuracy | ±0.5% of reading (1/1 to 1/500 full scale) |
| Sampling Rate | 1 ms |
| Input Channels | Up to 13 |
| Drive System | Brushless AC servo motor with vector control |
| Transmission | Preloaded precision ball screw |
| Load Cell | ORIENTEC high-accuracy strain-gauge sensor |
| Frame Rigidity | Enhanced by 30% vs. prior generation |
| Optional | Full-color capacitive touchscreen HMI |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | RTF-2 Series |
| Load Capacity Range | 25 kN – 300 kN |
| Crosshead Speed Range | 0.0005 – 1000 mm/min |
| Speed Accuracy | ±0.2% |
| Load Measurement Accuracy | ±0.5% of reading (Class 0.5) |
| Sampling Rate | 1 ms |
| Input Channels | up to 13 |
| Control System | Closed-loop microcomputer-controlled brushless digital servo |
| Safety Features | Overload protection,行程 limit switches, sampling interruption |
| Calibration | One-touch automatic range calibration |
| Structural Rigidity | 30% higher than previous generation |
| Actuation | High-precision backlash-free ball screw |
| Force Sensor | ORIENTEC high-accuracy transducer |
| Optional | Full-color touch-screen interface |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | RTF-2325 / RTF-2430 / RTF-1325 |
| Accuracy Class | 0.5 |
| Load Capacity Range | 1 kN to 300 kN |
| Test Width | 420 mm / 590 mm |
| Crosshead Speed | 0.0005–500 mm/min or 0.0005–1000 mm/min |
| Load Accuracy | ±0.5% of reading (standard), ±1% of reading (optional range) |
| Sampling Interval | 1 ms |
| Input Channels | Up to 13 |
| Display | Optional full-color capacitive touchscreen with real-time force-displacement curve plotting |
| Data Storage | ≥10 preconfigured test profiles with auto-save/resume on power cycle |
| Test Modes | Tensile, Compression, Flexural, Peel, Cyclic, Creep, Stress Relaxation |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | RTG Series |
| Load Capacity Options | 1 kN, 2.5 kN, 5 kN, 10 kN |
| Crosshead Travel (Effective) | 580–775 mm |
| Crosshead Speed Range | 0.05–1000 mm/min |
| Speed Accuracy | ±0.2% |
| Load Measurement Accuracy | ±1% of reading |
| Sampling Interval | 1 ms |
| Input Channels | up to 13 |
| Load Cell | ORIENTEC high-precision sensor |
| Drive System | Closed-loop microcomputer-controlled brushless digital servo motor |
| Transmission | High-precision backlash-free ball screw |
| Safety Features | Overload protection, dual-limit travel stops, sampling interruption |
| Calibration | One-touch automatic range calibration |
| Compliance | JIS B 7721, ISO 7500-1 Class 1, ASTM E4, ASTM D638, ASTM D3039, USP <1041>, GLP-compliant data traceability (with optional software) |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Manufacturer | A&D Co., Ltd. |
| Type | RV-10000A |
| Instrument Category | Vibrational Rheometer |
| Sample State | Liquid |
| Sample Viscosity Range | 0.3–25,000 mPa·s |
| Operating Frequency | 30 Hz |
| Vibration Amplitude | <1 mm |
| Repeatability | ±1% of full-scale reading |
| Temperature Control | Compatible with AX-SV-37 Circulating Bath |
| Sensor Material | Titanium-coated |
| Data Output | CSV (viscosity, temperature, shear stress) and JPEG plots to USB drive |
| Calibration | User-performed with deionized water reference |
| Measurement Stabilization Time | ≤20 s |
| Shear Rate Adjustment | Via programmable amplitude control |
| Compliance | Designed for GLP-compliant environments |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | STB Series |
| Type | Electronic Tensile Testing Machine |
| Max Load Capacity | 2.5 kN |
| Effective Travel | 850 mm (STB-1225L) / 550 mm (STB-1225S) |
| Crosshead Speed Range | 0.05–1000 mm/min |
| Speed Resolution | 0.01 mm/min |
| Speed Accuracy | ±0.5% |
| Load Measurement Accuracy | ±1% of reading (within 1/1 to 1/500 of sensor rated capacity) |
| Automatic Load Range Switching | Up to 128× |
| Load Calibration | One-touch, integrated sensor-based calibration with built-in load cell identification |
| Overload Protection | Dual-mode — electronic cut-off detection + mechanical travel limiters (upper/lower) |
| Position Resolution | 0.001 mm (≤10 mm), 0.01 mm (>10 mm) |
| Display | 6-digit digital crosshead position readout |
| Power Supply | AC 100 V, 1φ, 50/60 Hz, 350 VA |
| Operating Environment | 5–40 °C, 20–80 % RH |
| Dimensions (L×H×W) | 470 × 1450 × 335 mm (L-type), 470 × 1050 × 335 mm (S-type) |
| Weight | 56 kg (L), 43 kg (S) |
| Energy Saving | 30% reduced standby power consumption |
| Data Acquisition Rate | 0.2 ms (with TACT interface) |