Physical Property Testing Instruments
Filter
Showing 4261–4290 of 12427 results
| [Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | Porotest-DC |
| Pricing | Available Upon Request |
| Voltage Range | 0.5–3 kV (DC-3), 2–15 kV (DC-15), 5–35 kV (DC-35) |
| Coating Thickness Detection Range | 50–500 µm (DC-3), 0.3–4 mm (DC-15), 1–11 mm (DC-35) |
| Display | 3-digit LCD with real-time test voltage indication |
| Accuracy | ±(0.1 kV + 5% of reading) |
| Audible Alarm | 90 dB, 0.1 s per pinhole, short-circuit alert |
| Output Signal | Galvanically isolated, Uₘₐₓ = 100 V, Iₘₐₓ = 0.4 A, Pₘₐₓ = 10 W |
| Power Supply | 12 V DC rechargeable battery |
| Battery Runtime (Max Voltage) | ~10 h (DC-3), ~5 h (DC-15), ~3 h (DC-35) |
| Charging Time | ~13 h (full charge) |
| Operating Temperature | 0–50 °C |
| Storage Temperature | −20–60 °C |
| Humidity | Non-condensing environment recommended |
| Compliance | DIN 55670, VDE 0411 Part 1 |
| Accessories | ULIMATIC 800 charger (115 V/60 Hz or 230 V/50 Hz |
| Brand | IMASS |
|---|---|
| Origin | USA |
| Model | SP-2100 |
| Force Capacity | 25 lbf (111 N) |
| Speed Range | 0.2–300 in/min (0.5–762 cm/min) |
| Sampling Rate | Up to 4000 Hz |
| Delay Time (T1) | 0.1–4 s |
| Average Time (T2) | 0.1–50 s |
| Display | 4-line × 20-character VFD |
| Power Input | Auto-ranging 90–262 VAC, 47–63 Hz |
| Compliance | ASTM D1894, PSTC Test Methods, TLMI, FINAT, TAPPI |
| Software | DataLink21, ExLink21, StatsLink21 |
| Unit Systems | Imperial, Metric, SI |
| Fixture Angles | 67.5°–180° (indexed at 22.5° intervals) |
| Standard Fixtures | 180° peel, variable-angle peel, COF slider block (200 g), stainless steel test panels (2"×6", 6"×12") |
| Brand | IMCE |
|---|---|
| Origin | Belgium |
| Model | HT1600-DS |
| Sample Capacity | 2 simultaneous specimens |
| Operating Temperature Range | Up to 1600 °C |
| Optional Vertical Dilatometer Integration | Yes |
| Compliance | ASTM E1876, ISO 12680, DIN 51045 |
| Brand | IMCE |
|---|---|
| Model | HTVP1600/1700C (HT1050/1600/1700) |
| Operating Temperature Range | Ambient to 1600 °C / 1700 °C |
| Temperature Stability | ±1 °C |
| Heating Rate | 0.1–20.0 °C/min |
| Resonance Frequency Range | 10 Hz–150 kHz (±0.5 Hz) |
| Damping/Internal Friction Measurement Range | 1×10⁻⁵–0.1 |
| Elastic Modulus Accuracy | <0.1% at RT, <5% at elevated temperature |
| Elastic Modulus Range | 10 MPa–880 GPa |
| Shear Modulus & Poisson’s Ratio | Calculated from resonance spectra |
| Atmosphere Control | Inert, oxidizing, reducing, vacuum-compatible |
| Detection Method | Non-contact laser Doppler vibrometry |
| Compliance | ASTM E1876, ASTM C1259 |
| Brand | IMCE |
|---|---|
| Model | HTVP1600C |
| Measurement Principle | Resonant Frequency Method |
| Frequency Range | 1–100 kHz |
| Damping Factor (tan δ) | 1×10⁻⁵ to 0.1 |
| Temperature Range | Ambient to 1600 °C |
| Atmosphere Control | Yes |
| Compliance | ASTM E1876-99 |
| Output Parameters | Young’s Modulus, Shear Modulus, Poisson’s Ratio, Internal Friction (Q⁻¹) |
| Brand | IMCE |
|---|---|
| Model | HTVP650C |
| Measurement Principle | Impulse Excitation Technique (IET) / Resonance Frequency Analysis |
| Frequency Range | 1–100 kHz |
| Elastic Modulus Accuracy | < ±0.1% |
| Repeatability | < ±0.2% |
| Damping Resolution | down to 1×10⁻⁵ |
| Sample Dimensions | Length 20–300 mm, Width 2–130 mm |
| Maximum Operating Temperature | 650 °C (upgradable to 1100 °C) |
| Compliance | ASTM C1259, ASTM E1187 |
| Software | Integrated IET data acquisition & analysis suite with temperature correlation module |
| Excitation | Automated electromagnetic impulse system |
| Data Output | Young’s modulus (E), Shear modulus (G), Poisson’s ratio (ν), Resonant frequencies (f₁, f₂, …), Internal friction (Q⁻¹) |
| Brand | IMCE |
|---|---|
| Model | RFDA MF Professional |
| Origin | Belgium |
| Application | Non-destructive dynamic mechanical characterization of ceramics, metals, and advanced materials |
| Temperature Range | Ambient to 1750 °C |
| Atmosphere Control | Yes |
| Damping Measurement Range | 1×10⁻⁵ to 0.1 (dimensionless) |
| Measured Parameters | Resonant frequency, elastic modulus (E), shear modulus (G), Poisson’s ratio (ν), internal damping (Q⁻¹ or tan δ) |
| Compliance | ASTM E1876, ISO 12680, DIN 51045-1, applicable to GLP/GMP environments with audit trail enabled in RFDA MF Software |
| Key | Brand: OEM / Third-Party Industrial Supplier |
|---|---|
| Origin | Imported (Non-US/EU Designated Origin) |
| Manufacturer Type | Authorized Distributor |
| Quoted Price | USD 16,800 (FOB Origin, Excluding VAT, Freight & Installation) |
| Key | Table Surface Dimensions: 200 × 200 mm |
|---|---|
| Maximum Payload | 10 kg |
| Pulse Duration Range | 0.2–100 ms (programmable, auto-controlled) |
| Peak Acceleration Range | 50–9999 m/s² (programmable, auto-controlled) |
| Pulse Waveform | Half-sine (compliant with IEC 60068-2-27, GB/T 2423.5, GJB 150.18A, GJB 360B, JJG 497) |
| Shock Direction | Vertical |
| Dual-Impact Prevention | Hydraulic-friction braking system |
| Height Control | Digital preset + hydraulic lifting |
| Sampling Rate | 200 kHz |
| Signal Conditioning | Analog filtering + 160 dB/oct digital anti-aliasing filter |
| Repetition Rate | 0–100 shocks/min (±1% accuracy) |
| Power Supply | AC 380 V ±10%, 50 Hz, 3 kVA |
| System Mass | 2800 kg |
| Overall Dimensions | 750 × 2600 × 1000 mm |
| Software Platform | Windows XP-based, DAO data engine, automated Word report generation, real-time display of lift height, peak acceleration, pulse width, and Δv |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–42,000 (FOB) |
| Load Capacity | 10–100 kg |
| Table Size | 20×20 to 80×65 cm |
| Acceleration Range | 150–15,000 m/s² |
| Pulse Duration | 0.5–30 ms |
| Waveform Options | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Power Supply | AC 380 V ±5%, 50/60 Hz, 3-phase 5-wire |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–70,000 (FOB) |
| Compliance Standards | MIL-STD-810H, IEC 60068-2-29, GB/T 2423.5–2022, GB/T 2423.6–2022, GJB 150.18A–2009, GJB 360B–2009 |
| Waveform Options | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Control Mode | Closed-loop Acceleration Control for Collision Mode |
| Drive System | DC Motor + Precision Gear Reducer + Roller-Lift Mechanism |
| Pulse Duration Range | 1.5–25 ms |
| Peak Acceleration Range | 25–1200 m/s² |
| Drop Height Range | 0–200 mm |
| Repetition Rate | 1–120 impacts/min |
| Operating Pressure | 0.7–0.8 MPa (7–8 kgf/cm²) |
| Power Supply | AC 220 V ±5%, 50 Hz ±0.5 Hz, Single-phase Three-wire |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,950 (FOB) |
| Temperature Range | 105–132 °C (Control Point) |
| Temperature Uniformity | ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Range | 75–100% RH (Control Point) |
| Humidity Stability | ±2.5% RH |
| Humidity Uniformity | ±5.0% RH |
| Pressure Range | 0.05–0.196 MPa (0.5–2.0 kgf/cm²) |
| Ramp Time (Ambient → 132 °C) | ≤35 min |
| Pressure Ramp Time (Atmospheric → 2.0 kgf/cm²) | ≤40 min |
| Cooling System | Dual-Circuit Refrigeration with Eco-Friendly Refrigerant (R-404A or R-507) |
| Condenser Type | Air-Cooled with Forced-Air Heat Dissipation or Optional Water-Cooled Coil |
| Vacuum Preconditioning | Integrated Vacuum Pump with Filtered Air Recharge |
| Control Interface | LED Digital Timer with Start-on-Temp Trigger Logic |
| Safety | Dual-Limit Over-Temp/Over-Pressure Protection, Fault Indicator LEDs, Auto-Shutdown on Anomaly |
| Brand | AOLONG |
|---|---|
| Model | BatteryCT |
| Type | Industrial Micro-Computed Tomography System |
| Origin | Liaoning, China |
| Manufacturer | OEM Producer |
| X-ray Max Power | 320 W |
| X-ray Max Voltage | 225 kV |
| X-ray Max Current | 3 mA |
| Focal Spot Size | 4 µm |
| Beam Divergence Angle | 30° |
| Flat-Panel Detector Pixel Pitch | 139 µm |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,500 (approx.) |
| Compliance Standards | MIL-STD-810G Method 512.6 (Rain), IEC 60529 IPX1–IPX6, ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8, IEC 60068-2-68, GB/T 4942.1, IEC 60034-5 |
| Chamber Construction | SUS304 Stainless Steel Interior |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Turntable | PVC Hardboard Surface (Corrosion-Resistant) |
| Water-Contact Components | Stainless Steel or Brass |
| Control System Options | Programmable Logic Controller (PLC) or Full-Color Touchscreen HMI (proprietary developed) |
| Oscillation Mechanism | Stepper Motor-Driven Swing Pipe with Adjustable Angle & Sweep Rate |
| Nozzle Layout | Radial Arrangement Centered on Turntable Axis |
| Post-Test Drying | Compressed Air Blow-Off |
| Water Level | Motorized Auto-Adjustment |
| Spray System | High-Pressure Pump + Heated Spray Nozzles |
| External Casing | 1.2 mm Cold-Rolled A3 Steel, CNC Formed, Powder-Coated Finish |
| Noise Level | <65 dB(A) |
| Energy Efficiency | Optimized Thermal Management & Duty-Cycle Control |
| Brand | Infralytic |
|---|---|
| Origin | Germany |
| Model | NG-02 |
| Measurement Principle | Near-Infrared (NIR) Absorption Spectroscopy |
| Measurement Range | 0.05–6 g/m² |
| Accuracy | ±0.015 g/m² (0.02–0.3 g/m²), ±0.2 g/m² (0.3–2 g/m²), ±10% of reading (>2 g/m²) |
| Repeatability | <0.0010 g/m² |
| Resolution | 0.001 g/m² |
| Measurement Distance | 8 mm (±2 mm tolerance) |
| Operating Temperature | 0°C to 45°C |
| IP Rating | IP65 |
| Sample Surface Compatibility | Cold-rolled steel, hot-dip galvanized (HDG), electrogalvanized (EG), phosphated EG, annealed galvannealed (GA), aluminum (polished & EDT), ZnMg-coated, aluzinc |
| Lubricant Compatibility | Mineral oils, thixotropic mineral oils, hot-melt adhesives, waxes, and other organic lubricants (with custom calibration) |
| Power Supply | Internal rechargeable battery (≥12 h operation) |
| Data Documentation | Integrated photo-capture via smartphone interface |
| Auto-validation | Onboard self-check and drift compensation |
| Rolling Direction Detection | Real-time automatic recognition |
| Brand | Infralytic |
|---|---|
| Origin | Germany |
| Model | NG02 |
| Measurement Principle | Near-Infrared (NIR) Absorption Spectroscopy |
| Range | 0.05–6 g/m² |
| Accuracy | ±0.015 g/m² (0.02–0.3 g/m²), ±0.2 g/m² (0.3–2 g/m²), ±10% of reading (>2 g/m²) |
| Repeatability | <0.0010 g/m² |
| Resolution | 0.001 g/m² |
| Measurement Distance | 8 mm (+5/−2 mm) |
| IP Rating | IP65 |
| Operating Temperature | 0–45 °C |
| Power Supply | Internal rechargeable battery (≥12 h runtime) |
| Substrate Compatibility | Cold-rolled steel, hot-dip galvanized (HDG), electrogalvanized (EG), phosphated EG, annealed galvannealed, Al, ZnMg, aluzinc |
| Lubricant Compatibility | Mineral oils, thixotropic mineral oils, waxes, hot-melt adhesives, and other organics (with custom calibration) |
| Brand | Infralytic |
|---|---|
| Origin | Germany |
| Model | NG03 |
| Measurement Principle | Near-Infrared (NIR) Absorption Spectroscopy |
| Measurement Range | 0.05–6 g/m² |
| Accuracy | ±0.015 g/m² (0.02–0.3 g/m²), ±0.2 g/m² (0.3–2 g/m²), ±10% of reading (>2 g/m²) |
| Repeatability | <0.0010 g/m² |
| Resolution | 0.001 g/m² |
| Standoff Distance | 8 mm (+5/−2 mm) |
| Operating Temperature | 0–45 °C |
| IP Rating | IP65 |
| Substrate Compatibility | Cold-rolled steel, hot-dip galvanized (HDG), electrogalvanized (EG), phosphated EG, annealed galvannealed (GA), Al, ZnMg, aluzinc |
| Lubricant Compatibility | Mineral oils, thixotropic mineral oils, hot-melt adhesives, waxes, other organics (with custom calibration) |
| Brand | Infralytic |
|---|---|
| Origin | Germany |
| Model | NG1 |
| Measurement Principle | Dual-Wavelength Near-Infrared Absorption Spectroscopy |
| Typical Measurement Range | 0.1–20 g/m² (oil equivalent on metal substrates) |
| Accuracy | ±0.05 g/m² (calibrated against reference standards) |
| Repeatability | <±0.02 g/m² |
| Response Time | <1 second per measurement |
| Power Supply | Rechargeable NiMH battery (included) |
| Interface | USB 2.0 with proprietary PC software |
| Compliance | CE, RoHS, ISO/IEC 17025 traceable calibration support |
| Operating Temperature | 10–40 °C |
| Weight | 0.85 kg (with battery) |
| Brand | Infralytic |
|---|---|
| Origin | Germany |
| Model | NG1 / NG2 / NG3 |
| Measurement Principle | Near-Infrared (NIR) Absorption Spectroscopy |
| Range | 0.05–6 g/m² |
| Accuracy | ±0.015 g/m² (0.02–0.3 g/m²), ±0.2 g/m² (0.3–2 g/m²), ±10% of reading (>2 g/m²) |
| Repeatability | <0.0010 g/m² |
| Resolution | 0.001 g/m² |
| Measurement Distance | 8 mm (+5/−2 mm) |
| IP Rating | IP65 |
| Operating Temperature | 0–45 °C |
| Substrate Compatibility | Cold-rolled steel, hot-dip galvanized (HDG), electrogalvanized (EG), phosphated EG, annealed galvannealed (GA), aluminum (polished & EDT), ZnMg-coated steel |
| Lubricant Compatibility | Mineral oils, thixotropic mineral oils, hot-melt adhesives, waxes, other organics (with custom calibration) |
| Brand | Infralytic |
|---|---|
| Origin | Germany |
| Model | NG2 |
| Measurement Principle | Near-Infrared (NIR) Absorption Spectroscopy |
| Range | 0.05–6 g/m² |
| Accuracy | ±0.015 g/m² (0.02–0.3 g/m²), ±0.2 g/m² (0.3–2 g/m²), ±10% of reading (>2 g/m²) |
| Repeatability | <0.0010 g/m² |
| Resolution | 0.001 g/m² |
| Measurement Distance | 8 mm (+5/−2 mm) |
| IP Rating | IP65 |
| Operating Temperature | 0–45 °C |
| Power Supply | Internal rechargeable battery (≥12 h runtime) |
| Substrate Compatibility | Cold-rolled steel, hot-dip galvanized (HDG), electrogalvanized (EG), phosphated EG, annealed galvannealed (GA), aluminized (Al, Al-Zn, ZnMg), bare and pre-treated surfaces |
| Lubricant Compatibility | Mineral oils, thixotropic mineral oils, waxes, hot-melt adhesives, and other organic lubricants (with custom calibration) |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | NG2 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | Infralytic NG2 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | Infralytic NG2 |
| Pricing | Upon Request |
| Brand | Infralytic |
|---|---|
| Origin | Germany |
| Model | NG2 / NG3 |
| Measurement Principle | Near-Infrared (NIR) Absorption Spectroscopy |
| Range | 0.05–6 g/m² |
| Accuracy | ±0.015 g/m² (0.02–0.3 g/m²), ±0.2 g/m² (0.3–2 g/m²), ±10% of reading (>2 g/m²) |
| Repeatability | <0.0010 g/m² |
| Resolution | 0.001 g/m² |
| Measurement Distance | 8 mm (+5/−2 mm) |
| IP Rating | IP65 |
| Operating Temperature | 0–45 °C |
| Substrate Compatibility | Cold-rolled steel, hot-dip galvanized (HDG), electrogalvanized (EG), phosphated EG, annealed galvannealed (GA), aluminized (Al, ZnMg), bare aluminum (polished & EDT) |
| Lubricant Compatibility | Mineral oils, thixotropic mineral oils, hot-melt adhesives, waxes, other organics (with custom calibration) |
| Power | Battery-operated (≥12 h runtime) |
| Compliance | Designed for ISO/IEC 17025-aligned QA workflows, supports GLP/GMP audit trails via optional software logging |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NG2 / NG3 / NGO3 |
| Price Range | USD 68,000 – 136,000 |
| Measurement Principle | Quad-Wavelength Infrared Spectrophotometry |
| Measuring Range | 0.1–6 g/m² (oil), 0.1–10 g/m² (water) |
| Resolution | 0.1 mg/m² |
| Accuracy | ±10% (±5° angular tolerance) |
| Angular Drift Sensitivity | < 0.4% |
| Standoff Distance | 200 mm |
| Strip Height Tolerance | ±20 mm |
| Dimensions | 519 × 264 × 100 mm |
| Weight | 8 kg |
| Operating Temperature | 0 °C to +55 °C |
| Measurement Frequency | ≤120 Hz |
| IP Rating | IP65 |
| Compatible Substrates | Ferrous & non-ferrous metals, ceramics |
| Brand | Infralytic |
|---|---|
| Origin | Germany |
| Model | NGO |
| Measurement Principle | Near-Infrared (NIR) Absorption Spectroscopy |
| Measurement Range | 0.05–6 g/m² |
| Accuracy | ±0.015 g/m² (0.02–0.3 g/m²), ±0.2 g/m² (0.3–2 g/m²), ±10% of reading (>2 g/m²) |
| Repeatability | <0.0010 g/m² |
| Resolution | 0.001 g/m² |
| Measurement Distance | 8 mm (+5/−2 mm) |
| Surface Compatibility | Cold-rolled steel, hot-dip galvanized (HDG), electrogalvanized (EG), phosphated, aluzinc (ZnMg), bare aluminum, pre-treated substrates |
| Lubricant Compatibility | Mineral oils, thixotropic mineral oils, hot-melt adhesives, waxes, other organics (with custom calibration) |
| Operating Temperature | 0–45 °C |
| IP Rating | IP65 |
| Power Supply | Internal rechargeable battery (≥12 h operation) |
| Compliance | Designed for ISO/IEC 17025-aligned QA workflows, supports GLP/GMP traceability via timestamped digital logs |
| Brand | Infralytic |
|---|---|
| Origin | Germany |
| Model | NGO02 |
| Measurement Principle | Near-Infrared (NIR) Absorption Spectroscopy |
| Measurement Range | 0.05–6 g/m² |
| Accuracy | ±0.015 g/m² (0.02–0.3 g/m²), ±0.2 g/m² (0.3–2 g/m²), ±10% of reading (>2 g/m²) |
| Repeatability | <0.0010 g/m² |
| Resolution | 0.001 g/m² |
| Measurement Distance | 8 mm (+5/−2 mm) |
| Operating Temperature | 0 °C to 45 °C |
| IP Rating | IP65 |
| Power Supply | Internal rechargeable battery (≥12 h runtime) |
| Sample Surface Compatibility | Cold-rolled steel, hot-dip galvanized (HDG), electrogalvanized (EG), phosphated EG, annealed galvannealed (GA), aluminum (polished & EDT-treated), ZnMg-alloy coated, bare or pre-treated substrates |
| Lubricant Compatibility | Mineral oils, thixotropic mineral oils, hot-melt adhesives, waxes, and other organics (with custom calibration) |
| Compliance | Designed for ISO/IEC 17025-aligned QC environments |
| Brand | Infralytic |
|---|---|
| Origin | Germany |
| Model | NGO1/2/3 |
| Measurement Principle | Infrared Spectroscopy |
| Measurement Range | 0.05–6 g/m² |
| Accuracy | ±0.015 g/m² (0.02–0.3 g/m²), ±0.2 g/m² (0.3–2 g/m²), ±10% of reading (>2 g/m²) |
| Repeatability | <0.0010 g/m² |
| Resolution | Up to 0.001 g/m² |
| Measurement Distance | 8 mm (+5/−2 mm) |
| Operating Temperature | 0°C to 45°C |
| IP Rating | IP65 |
| Substrate Compatibility | Cold-rolled steel, hot-dip galvanized, electrogalvanized, phosphated, annealed galvanized, aluminum (polished & EDT), ZnMg-coated, aluzinc |
| Lubricant Types | Mineral oils, thixotropic mineral oils, hot-melt adhesives, waxes, other organics (with custom calibration) |
| Power | Battery-operated (≥12 h runtime) |
| Compliance | Designed for GLP/GMP-aligned production environments |
| Brand | Infralytic |
|---|---|
| Origin | Germany |
| Model | NGO3-W |
| Measurement Principle | Near-Infrared (NIR) Absorption Spectroscopy |
| Measuring Distance | 200 mm |
| Strip Height Tolerance | ±20 mm |
| Dimensions | 519 × 264 × 100 mm |
| Weight | 8 kg |
| Operating Temperature | 0 °C to +55 °C |
| Measurement Frequency | ≤120 Hz |
| Substrate Compatibility | All metallic and ceramic strip materials |
| Output Units | g/m², mg/m² |
| Display Resolution | 0.1 mg/m² |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |