Physical Property Testing Instruments
Filter
Showing 3301–3330 of 4355 results
| Brand | Particle Metrix |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ZetaView® Evolution |
| Zeta Potential Range | ±500 mV |
| pH Range | 1–13 |
| Operating Temperature Range | 5°C to 55°C |
| pH Resolution | 1–13 |
| Temperature Resolution | 0.1°C |
| Size Accuracy | ±5 nm |
| Size Repeatability | ±2 nm |
| Brand | OEM / Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 125°C |
| Humidity Range | 100% RH (Saturated Steam) |
| Temperature Display Resolution | 0.1°C |
| Temperature Control Accuracy | ≤ ±0.5°C (at saturated steam condition) |
| Temperature Uniformity | ±0.5°C |
| Humidity Stability | ±1% RH |
| Pressure Range | 0–2.5 kgf/cm² (Vessel Design Pressure: 3.5 kgf/cm²) |
| Pressure Fluctuation | ±0.02 kgf/cm² |
| Test Duration | 000–999 hours |
| Pressurization Time | ≤45 min to reach 1.04 kgf/cm² |
| Standard Test Condition | 121°C, 100% RH, 1.04 kgf/cm² |
| Internal Chamber Dimensions | Φ240 × 440 mm (Vertical Cylindrical) |
| Control System | Microprocessor-Based Controller with LED Display |
| Steam Circulation | Natural Convection |
| Compliance | GB/T 2423.1–1989, GB/T 2423.2–1989, GB/T 2423.3–1993 |
| Auto Water Replenishment | Yes (Enables Uninterrupted Long-Term Testing) |
| Brand | PCS Instruments |
|---|---|
| Origin | United Kingdom |
| Model | HPR |
| Instrument Type | Reciprocating Tribological Tester |
| Maximum Friction Force | 1–10 N |
| Temperature Range | Ambient to 130 °C |
| Load Range | 1–10 N |
| Contact Pressure | 0–1.4 GPa |
| Frequency Range | 10–200 Hz |
| Stroke Length | 20 µm–1.8 mm |
| Chamber Pressure Range | 10⁻⁵ torr to 10 bar |
| Sample Volume Capacity | 15 mL |
| Chamber Design | Fully Sealed, Removable & Pressure/Vacuum-Retentive |
| Brand | PCS Instruments |
|---|---|
| Origin | United Kingdom |
| Model | MTM-EC |
| Instrument Type | Multi-Functional Tribological Tester |
| Maximum Friction Force | 75 N |
| Temperature Range | Ambient to 150 °C |
| Contact Pressure Range | 0–1.25 GPa (standard), up to 3.1 GPa (optional) |
| Sliding Speed | −4 to +4 m/s |
| Electrochemical Potential Range | ±60 V (high range), ±10 V (low range) |
| Current Range | 0–3.5 A (high), 0–200 mA (low) |
| Measurement Noise | ±120 mV / ±20 mA (high), ±20 mV / ±0.4 mA (low) |
| Sample Volume | 30 mL (10 mL with optional filler kit) |
| Dimensions (H×W×D) | 400 × 400 × 600 mm |
| Weight | 30 kg |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 4,100 (FOB) |
| Chamber Dimensions | Ø300 mm × L500 mm |
| Inner Tank Material | SUS316 Stainless Steel (3 mm thick) |
| Outer Casing Material | SUS316 Stainless Steel (1 mm thick) |
| Insulation | Rockwool + Rigid Polyurethane Foam |
| Steam Generator | Finned-Tube Seamless Stainless Steel Heater with Platinum Coating |
| Temperature Sensor | PT-100 Platinum RTD |
| Control System | Microprocessor-Based PID Controller with LED Display |
| Pressure Gauge | Analog Pointer-Type |
| Max Operating Pressure | 2.65 kg/cm² (37.7 psi) at 140°C |
| Safety Features | Dual-Stage Pressure Relief, Water-Level Sensor Protection, Emergency Manual Vent Valve, Cold-Air Purge Function |
| Continuous Operation Duration | Up to 400 Hours Without Refill |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 4,050 (approx. ¥29,000) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,200 (FOB) |
| Temperature Range | 110 °C / 132 °C (saturated steam) |
| Humidity Range | 100 % RH (saturated) |
| Pressure Range | 0.5–2.0 kgf/cm² (max safety capacity: 3.5 kgf/cm²) |
| Time Setting Range | 0–999 h |
| Temperature Uniformity | ±2.0 °C |
| Temperature Ramp Rate | RT to 132 °C in ≤35 min |
| Pressure Ramp Rate | 0 to 2.0 kgf/cm² in ≤40 min |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Operating Ambient | ≤30 °C, well-ventilated |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (approx.) |
| Temperature Range | 110°C / 132°C (saturated steam) |
| Humidity Range | 100% RH |
| Pressure Range | 0.5–2.0 kg/cm² (max safety capacity: 3.5 kg/cm²) |
| Test Duration | 0–999 hours |
| Temperature Uniformity | ±2.0°C |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Ramp Time to 132°C | ≤35 min |
| Pressure Ramp Time to 2.0 kg/cm² | ≤40 min |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 4,100 (FOB) |
| Compliance | GB/T 10586–1989, GB/T 2423.3–1993 (IEC 60068-2-3), MIL-STD-810D Method 502.2, GJB 150.9–1986, GB/T 2423.34–1986, MIL-STD-883C Method 1004.2 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (approx.) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 100–132 °C |
| Humidity Condition | 100 % RH Saturated Steam |
| Pressure Range | 0–4 kg/cm² (gauge) above atmospheric pressure |
| Internal Chamber Dimensions (Multiple Models) | Φ25×40 cm, Φ30×50 cm, Φ40×60 cm, Φ50×70 cm |
| Temperature Control Accuracy | ±0.1 °C (PID) |
| Safety Features | Dual Overheat Protection, Interlocked Door Switch, Mechanical Safety Valve, Auto Water Replenishment, Condensate Purge System, Heat-Resistant ABS Door Guard, Integrated Silicone Door Gasket |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 4,100 (FOB) |
| Internal Dimensions (Φ×H) | Φ250×300 mm to Φ650×600 mm |
| Operating Temperature Range | 105–135 °C (143 °C optional) |
| Relative Humidity Range | 70–100 % RH |
| Pressure Range | 0–2.0 kg/cm² (gauge), up to 3.0 kg/cm² on request |
| Safety Features | Water-level sensor, overpressure relief valve, auto-locking door with pressure interlock, P.I.D. saturated steam temperature control |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,950 (FOB) |
| Compliance | JESD22-A102-B, IEC 60068-2-66, EIA/JESD22, GB/T 2423.40–1997 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (approx.) |
| Internal Dimensions (W×H×D) | Ø250×300 mm, Ø350×400 mm, Ø450×500 mm, Ø650×600 mm |
| Chamber Material | AISI 316 Stainless Steel |
| External Enclosure | Powder-Coated or Stainless Steel |
| Temperature Range | +10°C to 132°C (optional up to 147°C) |
| Pressure Range | 0–2.5 kg/cm² (gauge), 0–4.0 kg/cm² (relative) |
| Heating Method | Electric Immersion Heaters |
| Humidification | Steam Generation via Electric Heating Elements |
| Water Replenishment | Stainless Steel Float Valve System |
| Vacuum Preconditioning | Integrated Vacuum Pump with Air Filtration |
| Control Interface | LED Digital Timer with Temperature/Pressure Interlock |
| Power Supply | 220–240 V AC, 50/60 Hz, Single Phase |
| Pressure Ramp Time | ~45 min to 2.0 kg/cm² |
| Circulation Mode | Natural Convection Steam Atmosphere |
| Safety Features | Mechanical Pressure Lock, Automatic & Manual Pressure Relief, Low-Water Cut-off, Over-Temperature Protection |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 100–132 °C (saturated steam) |
| Humidity Range | 100 % RH |
| Pressure Range | 0.2–2.4 kgf/cm² |
| Internal Chamber Dimensions | Ø300 × 450 mm |
| External Dimensions | 660 × 1050 × 1250 mm |
| Chamber Material | SUS316 stainless steel |
| Temperature Uniformity | ±2.0 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Test Duration | 0–999 h adjustable |
| Heating Time | ≤45 min (RT to 132 °C) |
| Pressurization Time | ≤40 min (0 to 2.0 kgf/cm²) |
| Safety Features | Dual-stage overpressure protection, automatic pressure relief, dry-out cycle, filtered air purge (<1 µm), triple-level thermal cutoffs, water level monitoring |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,950 (FOB) |
| Temperature Range | 105–135 °C (up to 143 °C optional) |
| Humidity Range | 70–100 % RH |
| Pressure Range | 0.0–2.0 kg/cm² (gauge), relative to ambient atmospheric pressure |
| Internal Dimensions (Φ×H, mm) | Φ250×300 / Φ300×450 / Φ450×500 / Φ650×600 |
| External Dimensions (W×H×D, mm) | 500×500×700 / 580×850×650 / 800×750×900 / 950×900×1100 |
| Safety Systems | Low-water cutoff, overpressure relief, interlocked door safety switch, automatic venting |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Standard Accessories | Two stainless-steel adjustable shelves |
| Compliance | Designed per JEDEC JESD22-A108, JESD22-A110, and IEC 60068-2-66 test methodologies |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 0–132 °C |
| Humidity Range | 30–98% RH |
| Temp. Uniformity | ±0.5 °C (unloaded) |
| Humidity Uniformity | ±3% RH |
| Temp. Ramp Rate | 0.7–1.0 °C/min (unloaded) |
| Temp. Cycling Range | 20–80 °C |
| Test Duration Setting | 0–9999 h |
| Power Supply | AC 380 V |
| Refrigeration System | Hermetic Tecumseh (France) Compressor |
| Insulation | High-Density Ultra-Fine Glass Wool |
| Sealing | Dual-Silicone Gasket Design |
| Interior Material | SUS304 Mirror-Finish Stainless Steel |
| Exterior Finish | A3 Steel with Electrostatic Powder Coating |
| Air Circulation | Dual-Blower Forced Convection System |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Internal Dimensions | Φ25 × 40 cm |
| External Dimensions | W56 × H100 × D65 cm |
| Temperature Range | +100 °C to +132 °C |
| Humidity Range | 100% RH |
| Control System | Microprocessor-based PID controller with LED display and membrane keypad |
| Heating System | Stainless steel finned heaters (SUS#304) |
| Humidification Method | Electric surface evaporation |
| Water Requirement | RO purified water or distilled water |
| Supply Voltage | 1Φ 220 V, 8 A, 50 Hz ±10% |
| Safety Protections | Dual overheat protection, pressure relief valve, door interlock, dry-run protection for heater/humidifier, low-water cutoff, overcurrent/overload protection, thermal cut-off switch, fuseless overload protector |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (approx.) |
| Temperature Range | +100 °C to +132 °C |
|---|---|
| Temperature Uniformity | ±1.5 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Range | 75–100 % RH (saturated steam) |
| Humidity Uniformity | ±3.0 % RH |
| Humidity Stability | ±1.5 % RH |
| Pressure Range (gauge) | 0–4 kg/cm² |
| Internal Chamber Pressure | 0–2.8 kg/cm² |
| Operating Pressure Band | 1.0–3.0 kg/cm² |
| Safety Pressure Capacity | 4 kg/cm² (1 atm + 3 kg/cm²) |
| Steam Circulation | Natural convection |
| Timer Range | 0–999 h |
| Pressurization Time (0 → 2.00 kg/cm²) | ~45 min |
| Heating Time (100 °C → 132 °C, no-load) | ~10 min |
| Temperature Ramp Rate | Air temperature average, not sample temperature |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | 100–132 °C |
| Humidity Range | 100 % RH |
| Temperature Uniformity | ±0.5 °C (unloaded) |
| Humidity Uniformity | ±3 % RH |
| Heating/Cooling Rate | 0.7–1.0 °C/min (unloaded) |
| Temperature Cycling Range | 20–80 °C |
| Timer Range | 0–9999 h |
| Power Supply | AC 380 V |
| Insulation | High-Density Fine-Glass Wool |
| Sealing | Dual-Silicone Gasket System |
| Refrigeration | Hermetic Tecumseh or Copeland Compressor (Equivalent to “Tecumseh”-class Performance) |
| Interior Material | SUS304 Mirror-Finish Stainless Steel |
| Exterior Finish | Powder-Coated A3 Steel |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,950 (FOB) |
| Internal Chamber Diameter × Depth | ∅30 cm × D (model-specific) |
| Temperature Range | 100–132 °C |
| Humidity Range | 75–100 % RH |
| Pressure Range | 0.0–2.0 kg/cm² (gauge), absolute pressure = 1.0 kg/cm² + gauge pressure |
| Max Safety Pressure Capacity | 4.0 kg/cm² |
| Temperature Uniformity | ±1.5 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Pressurization Time (0 → 2.0 kg/cm²) | ≈30 min |
| Internal Material | SUS316 stainless steel |
| External Material | SECC cold-rolled steel with electrostatic powder coating |
| Key | Test Volume: 90 × 90 × 90 cm (W×D×H) |
|---|---|
| Net Weight | 320 kg |
| External Dimensions | 900 × 700 × 1600 mm (W×D×H) |
| Internal Chamber | Cylindrical, Ø400 mm × L600 mm (HAST-45 type) |
| Inner Liner Material | SUS316 stainless steel (3 mm thick) |
| Insulation | Rockwool + rigid polyurethane foam |
| Heating Element | Titanium steam generator tube |
| Temperature Range | 20°C ±15°C |
| Humidity Range | 75–100% RH |
| Dust Concentration Options | 100 mg/m³, 3000 mg/m³, 5000 mg/m³, 60000 mg/m³ |
| Dust Velocity | 5 m/s (for selected concentrations) |
| Cycle Timing | 0–999 sec / 0–99 hr (dual-range programmable) |
| Control System | Color touchscreen PLC with PT-100 sensors, P.I.D. saturation control, analog pressure gauge, manual fill valve with auto-refill capability |
| Compliance | GB/T 10586–1989, GB 2423.3–1993 (IEC 60068-2-3), MIL-STD-810D Method 502.2, GJB 150.9–1986, GB 2423.34–1986, MIL-STD-883C Method 1004.2 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,950 (FOB) |
| Internal Chamber Dimensions | Ø300 × 450 mm (D × H) |
| External Dimensions | 660 × 950 × 600 mm (W × H × D) |
| Internal Material | SUS304 Stainless Steel |
| External Finish | Powder-Coated Paint |
| Temperature Range | 100–132 °C (adjustable) |
| Humidity Range | 75–100 % RH (saturated steam) |
| Pressure Range | 0.0–3.00 kg/cm² (gauge) |
| Max Safety Capacity | 3.00 kg/cm² (1 atm + 2 kg/cm²) |
| Timer Range | 0–1000 h |
| Temperature Uniformity | ±2.0 °C at 100 °C |
| Heating Rate | RT to 121 °C in ≤35 min |
| Pressurization Rate | 0.0 to 1.00 kg/cm² in ≤35 min |
| Circulation Method | Natural convection of saturated steam |
| Temperature Sensor | PT-100 RTD (Platinum Resistance Thermometer) |
| Heating Element | Insulated, high-voltage-rated tubular heater |
| Controller | Microprocessor-based LED display with PID + SSR control |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Pressure Display Accuracy | ±0.15 kg/cm² |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,950 (FOB) |
| Internal Chamber Dimensions | Ø300 × 450 mm (D × H) |
| External Dimensions | 660 × 950 × 600 mm (W × H × D) |
| Internal Material | SUS304 Stainless Steel |
| External Finish | Powder-Coated Steel |
| Temperature Range | 100–132 °C (adjustable) |
| Humidity | 100 % RH (saturated steam) |
| Pressure Range | 0.0–3.0 kg/cm² (gauge) |
| Max Safety Rating | 3.0 kg/cm² (g) |
| Time Setting Range | 0–1000 h |
| Temperature Uniformity | ±2.0 °C at 100 °C |
| Heating Rate | RT to 121 °C in ≤35 min |
| Pressurization Rate | 0.0 to 1.0 kg/cm² in ≤35 min |
| Circulation Method | Natural convection of saturated steam |
| Temperature Sensor | PT-100 RTD (Class A) |
| Heating Element | Insulated high-voltage resistance heater |
| Control System | Microprocessor-based PID controller with LED display for temperature/time |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Pressure Accuracy | ±0.15 kg/cm² |
| Power Supply | AC 220 V, 50/60 Hz, 1-phase, 4 kW |
| Electrical Wiring | 4 mm² copper conductor recommended |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +10 °C to 132 °C (optional custom up to 147 °C) |
| Internal Chamber Dimensions (Ø × H, cm) | 25×30, 35×40, 45×50, 65×60 |
| Chamber Material | AISI 316 Stainless Steel |
| External Enclosure | Powder-Coated or Stainless Steel |
| Pressure Range | 0.2–3.0 kg/cm² (≈20–294 kPa gauge) |
| Pressurization Time | ~45 min to 2.0 kg/cm² |
| Humidification Method | Electric Heating Tube |
| Water Replenishment | Stainless Steel Float Valve System |
| Vacuum Preconditioning | Integrated Vacuum Pump with Filtration |
| Power Supply | 220–240 V AC, 50/60 Hz, Single Phase |
| Safety Features | Dual-Limit Overpressure Relief (Auto + Manual), Interlocked Circular Door, LED Digital Timer, Real-Time Pressure/Temperature Monitoring, Fault Indicator Lights, Auto-Shutdown on Anomaly |
| Temperature Range | +100 °C to +132 °C (saturated steam temperature) |
|---|---|
| Humidity | 100% RH (saturated steam) |
| Operating Pressure | 1.5–3.2 kg/cm² (absolute pressure) |
| Time Setting Range | 000–999 hours |
| Pressure Ramp Time | ~45 minutes to reach 1.04 kg/cm² from ambient |
| Temperature Uniformity | ±0.5 °C |
| Temperature Display Resolution | 0.1 °C |
| Pressure Stability | ±0.2 kg/cm² |
| Controller | Microprocessor-based PID with PT-100 platinum RTD sensor |
| Safety Features | Interlocked door switch, mechanical safety valve, ABS thermal-insulated door cover, integrated silicone gasket |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (FOB) |
| Inner Chamber Dimensions (cm) | Φ25×35 |
| Temperature Range | 100–132 °C (143 °C optional) |
| Humidity | 100 % RH (saturated steam) |
| Pressure Range | 0.0–4.0 kg/cm² absolute (max safety capacity: 4.0 kg/cm² abs = 1 atm + 3.0 kg/cm² gauge) |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.5 °C |
| Chamber Material | SUS316 stainless steel |
| Exterior Material | Powder-coated steel |
| Heating System | Electric immersion heater with thermal cutoff |
| Safety Protections | Dual-stage overtemperature, dual-stage overpressure, emergency mechanical pressure relief, door pressure interlock, water-level alarm & auto-shutdown, heater dry-run protection, humidifier overcurrent protection, manual & automatic pressure release |
| Power Supply | AC 220 V / 50–60 Hz / single-phase OR AC 380 V / 50–60 Hz / three-phase |
