Physical Property Testing Instruments
Filter
Showing 1111–1140 of 4355 results
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 5,200–14,800 (FOB) |
| Temperature Range | 0–150°C (Chamber), 40–85°C (Black Panel) |
| Humidity Range | 20–98% RH |
| Irradiance | 550 W/m² ±10% (300–800 nm) / 1000 W/m² ±10% (300–1200 nm) |
| Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ≈1,500 h |
| Spray Cycle | 1–999 min (intermittent or continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer mesh tray or 500 mm rotary turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Compliance | ASTM G155, ISO 4892-2, AATCC TM16, SAE J2527, GB/T 16422.2 |
| Brand | OK Instruments |
|---|---|
| Model | OK-XD-100 / OK-XD-225 / OK-XD-500 / OK-XD-1000 |
| Type | Benchtop Xenon Arc Environmental Test Chamber |
| Light Source | Long-Arc Air-Cooled Xenon Lamp (1.8–6 kW) |
| Spectral Range | 300–800 nm (550 W/m² ±10%) and 300–1200 nm (1000 W/m² ±10%) |
| Black Panel Temperature Range | 40–85°C |
| Chamber Temperature Range | 0–150°C |
| Humidity Control | 20–75% RH (light cycle), 20–98% RH (dark cycle) |
| Humidity Accuracy | ±2.0% RH |
| Temperature Accuracy | ±0.5°C |
| Uniformity | ±2.0°C (temp), ±3.0% RH (humidity) |
| Spray Duration | 1–999 min (intermittent/continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500 mm diameter rotating turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Lamp Life | ~1500–1600 hours |
| Filter System | Precision broadband optical filters for solar-spectrum simulation |
| Compliance | Designed to support ASTM G155, ISO 4892-2, AATCC TM16, SAE J2527, and GB/T 16422.2 test protocols |
| Brand | Haytham |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | 200X |
| Pricing | Available Upon Request |
| Brand | Digerui |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | DKR |
| Price | USD 140 (approx.) |
| Key Standards | GB 15811-2016, YY/T 0167, ISO 7864, ASTM F2182 |
| Nominal Needle Gauge Range | 0.2–3.4 mm |
| Force Measurement Range | 0–20 N (standard), 0–50 N (optional) |
| Force Accuracy | ±0.5% FS |
| Crosshead Speed Range | 0–500 mm/min |
| Speed Accuracy | Class 0.5 |
| Penetration Substrate | Medical-grade polyurethane membrane per GB 15811 |
| Display | 7-inch industrial capacitive touchscreen |
| Data Output | Built-in thermal printer |
| Software | Multi-level user permission management, remote firmware update capability |
| Compliance | Designed for GLP-aligned lab environments |
| Brand | Digerui |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | DKR-HCOF- |
| Force Range | 10 N (standard) |
| Accuracy | Better than Class 0.5 |
| Force Resolution | 0.01 N |
| Displacement Accuracy | Class 0.5 |
| Displacement Resolution | 0.1 mm |
| Test Speed | 1–800 mm/min (infinitely variable) |
| Stroke | 1000 mm |
| COF Test Distance | >150 mm |
| Catheter Clamp Gap | 0–50 mm |
| Water Bath Temperature Control Range | Ambient to 40 °C |
| Sample Capacity | 1 catheter per test |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 540 × 450 × 1560 mm |
| Net Weight | 92 kg |
| [Key | Value] |
|---|---|
| Brand | OEM / Custom Brand Available |
| Origin | Imported (Manufactured Outside China) |
| Manufacturer Type | Authorized Distributor |
| Price Range | USD 2,800–3,200 (FOB) |
| Temperature Range | −70 °C to +150 °C (configurable per model) |
| Humidity Range | 20–98% RH |
| Control Accuracy | ±0.5 °C (temp), ±2.5% RH (humidity) |
| Uniformity | ±1.0 °C (temp), ±3.0% RH (humidity) |
| Ramp Rate | 1–3 °C/min (average air temperature, unloaded) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Load Cell Accuracy | ±0.03% F.S. |
| Force Resolution | 1/100,000 full scale |
| Encoder Resolution | 2500 pulses/rev |
| Drive System | Panasonic AC Servo Motor |
| Transmission | Precision Ball Screw & Linear Guide Rails |
| Overload Capacity | 150% of rated load |
| Compliance | GB/T 16491, GB/T 1040, GB/T 8808, GB/T 13022, GB/T 2790–2792, GB/T 16825, GB/T 17200, GB/T 3923.1, GB/T 528, GB/T 2611, GB/T 6344, GB/T 20310, GB/T 3690, GB/T 4944, GB/T 3686, GB/T 529 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Brand | Dillon |
|---|---|
| Origin | United Kingdom |
| Model | AWT05-506447 |
| Construction | Industrial-grade RF module with IP65-rated housing |
| Operating Range | Up to 300 ft (91 m) line-of-sight |
| Battery Life | ≥12 months (CR2032 lithium coin cell) |
| Compatibility | All Dillon EDXTREME series digital force gauges (EDx–1T through EDx–250T) |
| Protocol | Proprietary 2.4 GHz FHSS (Frequency-Hopping Spread Spectrum) |
| Certifications | CE, UKCA, FCC Part 15 Subpart C |
| Brand | DJH Designs |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | DFM1 |
| Price Range | USD 70,000 – 140,000 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Standards Compliance | GB/T 16491, GB/T 1040, GB/T 8808, GB/T 13022, GB/T 2790–2792, GB/T 16825, GB/T 17200, GB/T 3923.1, GB/T 528, GB/T 2611, GB/T 6344, GB/T 20310, GB/T 3690, GB/T 4944, GB/T 3686, GB/T 529 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,500 (FOB Guangdong) |
| Compliance Standards | MIL-STD-810H Method 506.7, IEC 60529 IPX1–IPX6, ISO 20653:2013, GB/T 4208–2017, GB/T 2423.38–2008, GJB 150.8A–2009 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 4,050 (FOB) |
| Internal Chamber Dimensions (PTC-25) | Ø250 × 450 mm |
| Internal Chamber Dimensions (PTC-35) | Ø350 × 500 mm |
| Temperature Range | RT+10°C to 132°C |
| Humidity Range | 100% RH |
| Pressure Range | 0.0–2.8 kg/cm² (gauge), max capacity 4.0 kg/cm² |
| Temperature Uniformity | ±1.5°C |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Pressurization Time (0 → 2.0 kg/cm²) | ~30 min |
| Inner Chamber Material | SUS304 Stainless Steel |
| Outer Casing Material | SECC Cold-Rolled Steel with Electrostatic Powder Coating |
| Brand | Doppler |
|---|---|
| Model | Doppler-3 |
| Origin | Guangdong, China |
| Detection Principle | Phased Array Ultrasonic Testing (PAUT) with Immersion Technique |
| Scan Mode | B-scan |
| Probe Type | Concave Linear Phased Array Probe (Configurable: 2.5–15 MHz, 64–256 elements) |
| Positioning Accuracy | ±0.05 mm |
| Cycle Time | ≤3 min per 1 m rod (high-resolution mode) |
| Compliance | Designed for ASME Section V Art. 4, ASTM E2700, ISO 16810, and nuclear-grade QA/QC workflows |
| Software | Real-time C-scan visualization, automated defect sizing & classification, statistical reporting (defect count, depth, length, amplitude), audit-trail-enabled data export |
| Automation Level | Fully integrated robotic handling (loading/unloading, rotational clamping, XYZ probe positioning), optional portable PAUT unit for manual verification |
| Application Domain | Nuclear energy components (fuel cladding, control rod sleeves, structural alloy rods) |
| Brand | Doppler |
|---|---|
| Model | Automated PAUT Water Immersion System |
| Origin | Guangdong, China |
| Motion Axes | X (800 mm), Y (600 mm), Z (400 mm) |
| Repeatability | < 0.05 mm/m (X/Y/Z) |
| Position Resolution | < 0.01 mm |
| Scan Speed | 1–500 mm/s |
| Operating Temperature | −10 °C to +40 °C |
| Software SDK Support | C++, C#, VB, VC, Delphi (source code provided) |
| System Components | PAUT instrument, industrial PC, multi-axis motion modules, immersion tank, custom probe fixtures, water circulation & filtration unit, control cabinet, mechanical frame |
| Compliance | Designed for ASTM E273, ISO 16810, and EN 13588-compliant ultrasonic inspection workflows |
| Application Focus | High-precision volumetric NDT of aluminum/copper cold plates in EV battery thermal management systems |
| Brand | Doppler |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SAM-1 |
| Price | USD 280,000 (FOB Guangdong) |
| Application Field | Aerospace & Semiconductor Sputtering Target Manufacturing |
| Scanning Mode | B-scan |
| Transducer Configuration | Single-element immersion transducer |
| Motion System | High-precision XYZ linear motor-driven scanning stage |
| Water Tank | Heavy-duty stainless steel immersion tank (modular sizing: Small / Medium / Large) |
| Imaging Modes | A-scan, B-scan, S-scan, C-scan, Top-C-scan, 3D volumetric reconstruction |
| Data Acquisition | Full RF waveform + positional metadata synchronized at sub-millisecond resolution |
| Compliance | Designed to support ISO 17025-compliant workflows |
| Brand | Doppler |
|---|---|
| Origin | Guangdong, China |
| Model | SAM-450C |
| Scan Mode | B-scan |
| Transducer | Single-element focused transducer |
| Scan Volume | 450 × 300 × 120 mm |
| Maximum Image Resolution | 10,000 × 10,000 pixels (subject to configuration) |
| Max Scan Speed | 1200 mm/s |
| Ultrasonic Frequency Range | 10–300 MHz |
| X/Y-axis Repeatability | ±0.5 µm |
| Ambient Temperature Range | 19–25 °C |
| Relative Humidity Limit | ≤65% RH |
| Imaging Modes Supported | A-scan, B-scan, C-scan, D-scan, X-scan |
| System Positioning Accuracy | ±0.03 mm |
| Effective Imaging Resolution | 0.2 × 0.2 mm |
| Minimum Detectable Defect Size | <25 µm (at 100 MHz) |
| Operating Frequency Range (Typical) | ≥20 MHz |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DRH-100CL |
| Instrument Type | Benchtop |
| Cooling Method | Air-Cooled |
| Temperature Range | −10 °C to +65 °C |
| Humidity Range | 20–95 %RH |
| Temperature Uniformity | ±0.5 °C |
| Humidity Deviation | ±3 %RH |
| Interior Dimensions (W×D×H) | 450 mm × 380 mm × 590 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DRH-150CL |
| Instrument Type | Upright Chamber |
| Cooling Method | Air-Cooled |
| Temperature Range | −10 °C to +65 °C |
| Humidity Range | 20–95 %RH |
| Temperature Uniformity | ±0.5 °C |
| Humidity Deviation | ±3 %RH |
| Internal Dimensions (W×D×H) | 480 mm × 400 mm × 780 mm |
| Nominal Volume | 150 L |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 1600 W |
| Control Interface | Color Touchscreen Controller with RS485 Communication |
| Programmability | 30-Stage Programmable Logic |
| Standard Accessories | RS485 Port, 25 mm Test Port, Adjustable Stainless Steel Shelves (3 pcs), Auto-Circulating Water Supply System |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DRH-250CL |
| Instrument Type | Benchtop |
| Condensation Method | Air-Cooled |
| Temperature Range | −10 °C to +65 °C |
| Humidity Range | 20–95 %RH |
| Temperature Uniformity | ±0.5 °C |
| Humidity Deviation | ±3 %RH |
| Internal Chamber Dimensions (W×D×H) | 580 mm × 500 mm × 850 mm |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 2100 W |
| Nominal Volume | 250 L |
| Standard Accessories | RS485 Interface, 25 mm Test Port, 3 Adjustable Stainless Steel Shelves |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | DRH-50-N20 |
| Instrument Type | Benchtop |
| Cooling Method | Air-Cooled |
| Temperature Range | −20 °C to 120 °C |
| Humidity Range | 20–98 % RH |
| Temperature Uniformity | ±0.5 °C |
| Humidity Deviation | ±3–5 % RH |
| Interior Dimensions (W×D×H) | 360 mm × 350 mm × 400 mm |
| Nominal Volume | 50 L |
| Control Interface | Color Touchscreen LCD |
| Programmability | 30-Stage Ramp/Soak Profile |
| Power Supply | AC 220 V / 50 Hz |
| Standard Ports | RS485, Φ25 mm Access Port (Left Side) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | DRH-55AC |
| Instrument Type | Benchtop Chamber |
| Condensation Method | Air-Cooled |
| Temperature Range | 0–70 °C |
| Humidity Range | 30–98 %RH |
| Temperature Uniformity | ±0.5 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±3–5 %RH |
| Humidity Fluctuation | ±3–5 %RH |
| Heating Rate | 1.0–3.0 °C/min |
| Internal Chamber Dimensions (W×D×H) | 320 × 400 × 430 mm |
| Nominal Volume | 55 L |
| Standard Accessories | RS485 Interface, Left-Side Φ25 mm Test Port |
| Compliance | GB/T 2423.1–4, GB/T 10586, GJB 150.3A–2009, GJB 150.4A–2009, IEC 60068-2-1, -2-30, -2-38 |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | DW-100CL |
| Temperature Range | −10 °C to 65 °C |
| Temperature Uniformity & Fluctuation | ±0.5 °C |
| Cooling Time | 30 min |
| Heating Time | 30 min |
| Temperature Resolution | 0.1 °C |
| Control Accuracy | ±0.1 °C |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DW-300CB |
| Temperature Range | −40 °C to +65 °C |
| Temperature Uniformity & Fluctuation | ±0.5 °C |
| Cooling Rate | 0.7–1 °C/min |
| Heating Rate | 1–3 °C/min |
| Temperature Resolution | 0.1 °C |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DW-500CL |
| Temperature Range | −10 °C to 65 °C |
| Temperature Uniformity & Fluctuation | ±0.5 °C |
| Cooling Rate | 0.7–3 °C/min |
| Heating Rate | 1–5 °C/min |
| Temperature Resolution | 0.1 °C |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HWS-3900 |
| Instrument Type | Upright Chamber |
| Cooling Method | Air-Cooled |
| Temperature Range | 5–60 °C |
| Humidity Range | 40–90 %RH |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Internal Chamber Dimensions (W×D×H) | 560×790×650 mm |
| Power Supply | AC 220 V, 50 Hz |
| Temperature Resolution | 0.1 °C |
| Standard Load Shelf | 1 unit |
| Compliance | HJ 836–2017, GB/T 2423.3–1993, GB/T 2423.4–1993, GB 5170.2–1995, GB 5170.5–1995, JJG 1036, GB/T 16157–1996 (as amended), HJ 656, HJ/T 373, HJ/T 397 |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | SEH-55 |
| Instrument Type | Benchtop |
| Cooling Method | Air-Cooled |
| Temperature Range | 0–80 °C |
| Humidity Range | 30–98 %RH |
| Temperature Uniformity | ±0.5 °C |
| Humidity Deviation | ±3–5 %RH |
| Interior Dimensions (W×D×H) | 320 × 400 × 430 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | THL-A100-I |
| Temperature Range | -20 °C to +120 °C |
| Refrigeration Method | Hermetic Compressor Cooling |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ≤2 °C |
| Heating Rate | 1–3 °C/min (adjustable) |
| Cooling Rate | 0.7–1 °C/min (adjustable) |
| Interior Dimensions (W×D×H) | 500 mm × 400 mm × 500 mm |
| Interior Volume | 100 L |
| Control Interface | Color Touchscreen (English/Chinese Switchable) |
| Programmability | 1000 Programs × 100 Segments |
| Safety Protections | Over-Temperature, Over-Current, Compressor/Fan Overload, Leakage Current |
| Optional Interfaces | RS485, USB |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | THL-A1000-II |
| Temperature Range | -20°C to +150°C |
| Temperature Uniformity | ≤2°C |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | 1–3°C/min (adjustable) |
| Cooling Rate | 0.7–1°C/min (adjustable) |
| Internal Dimensions (W×D×H) | 1000×800×1000 mm |
| Nominal Volume | 1000 L |
| Power Supply | AC 380 V |
| Input Power | 12,000 W |
| Control System | Color Touchscreen with 1000 Programmable Sequences (100 Segments/Sequence) |
| Compliance | Designed for ASTM D4329, ISO 4892-2, IEC 60068-2-1, IEC 60068-2-2, MIL-STD-810G, GB/T 2423.1 & GB/T 2423.2 |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | THL-A225-II |
| Temperature Range | -20 °C to +150 °C |
| Cooling Method | Compressor-Based Refrigeration |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ≤2 °C |
| Heating Rate | 1–3 °C/min (Adjustable) |
| Cooling Rate | 0.7–1 °C/min (Adjustable) |
| Internal Chamber Dimensions | 600 mm × 500 mm × 750 mm (W×D×H) |
| Power Supply | AC 220 V / 50 Hz |
| Control System | Full-Color Touchscreen with PID Auto-Tuning |
| Data Logging | Real-Time Storage, Exportable to Excel or Graphical Formats |
| Communication | RS485/USB (Optional), Cloud-Enabled Remote Access via Web Browser & Mobile App |
| Safety Protections | Over-Temperature Cut-Off, Compressor/Fan Overload Protection, Leakage Current Protection, Auto-Recovery After Power Interruption |